Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 4609-4656 of 13417
Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26659 -

This Gas Tank To Filler Pipe Hose reproduction fits the 67, 68, 69, and 70 Mercury Cougar. Excludes 1970 with California emissions. Even if yours is not cracked it will be hard if it is over two decades old. We highly suggest you replace this part if yours is in fact hardened with age because a minor rear end collision could cause it to fail and send fuel spilling into your trunk area. Replaces Ford part #: C8ZA-9047-A.

Price: $21.85

Buy Details

Availability: Out of Stock
Item #: 41779 -

Both ends have 90 degree molded ends. Attaches heater core to water heater control valve.Replaces Ford Part #: C7ZZ-18472-CVAC.

Price: $94.85

Buy Details

Availability: In-Stock Item
Item #: 13721 -

C8ZA-3494-A Lower pressure hose. High pressure hose from the insulator to the control valve. All correct ribbing, striping, and crimping. Has correct colored protective sheathing. *Note - There are two halves to the pressure hose from the pump to the control valve. This is the lower half only. Please see the various part numbers for the upper section of pressure hose.

Price: $45.95

Buy Details

Availability: In-Stock Item
Item #: 14075 -

New power steering pressure hose for late 1972 and all of 1973 Mercury Cougar and Ford Mustang with 351 engines. This was a re-engineered hose to eliminate that 1971-72 extra long hose that doubles back on itself. Has brass fitting for attaching the pump end steel tube fitting, you need to save that steel tube. Made in the U.S.A. Replaces Ford Part # D1ZZ-3A719-A

Price: $45.80

Buy Details

Availability: In-Stock Item
Item #: 53273 -

NOTE: Some customers have mentioned this hose does not fit well, others have said it fits with no issues. It is not the same as OEM and fitment seems to depend on the vehicle and modifications that have been previously done. We recommend going with our premium version. Lower pressure hose for any 1967-70 Mercury Cougar and Ford Mustang, but with a V-8. The factory power steering pressure hose originally was a two piece hose. Valve end has the 5/16" flared male fitting, and a 3/8" female...

MSRP:$50.00
Price: $39.47

Buy Details

Availability: In-Stock Item
Item #: 42029 -

This Pump to Value Outlet Pressure Hose is 100% correct for the 1967, 1968, 1969, 1970 big block. This hose has industrial high pressure fittings that are much higher quality than those available by most Mustang / Cougar Parts Dealers. Replaces Ford Part #: C9OZ-3A319-C.

MSRP:$50.00
Price: $38.55

Buy Details

Availability: In-Stock Item
Item #: 42010 -

This Pump to Value Outlet Pressure Hose is 100% correct for the 1969 small block, and will work for the 1967 or 1968 with the 5/16 inch control valve fitting if the power steering hoses are routed the same as on the big block engines. The big block routing is far superior to the original routing as the original routing was susceptible to rubbing against the exhaust manifold. This hose has industrial high pressure fittings that are much higher quality than those available by most Mustang /...

MSRP:$50.00
Price: $45.38

Buy Details

Availability: In-Stock Item
Item #: 42030 -

This Pump to Value Outlet Pressure Hose is 100% correct for the 1970 small block. This is the upper portion that connects to the one year only 1970 pump found on the 351c, 351w and BOSS 302 equipped cars. Like the originals, this is part one of a two part hose. This hose has industrial high pressure fittings that are much higher quality than those available by most Cougar / Mustang parts dealers. Replaces Ford Part #: D0OZ-3A319-A.

Price: $22.75

Buy Details

Availability: In-Stock Item
Item #: 31588 -

Reproduction hose that connects the oil cap to the air cleaner on cars equipped with the 289 engine. Replaces Ford Part number C6AZ-6A664-P

Price: $17.35

Buy Details

Availability: In-Stock Item
Item #: 41427 -

Reproduction PCV Hose with Ford Logo for the 1969 Mercury Cougar or Ford Mustang with 351 engines. Fits from the PCV valve in the valve covers to the factory Ford carburetor spacer plate.  Approximately 3/8" inside diameter but it will stretch to fit over a 1/2" PCV valve fitting.  Keep in mind that it will stretch easier if warmed.

Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25549 -

D3-6A664-2V Original used hose that connects the oil cap mounted PCV valve and the metal hard line on 1973Mercury Cougar and Ford Mustang H-code 351-2V engines only. Used hoses will have faded Motorcraft markings (if present). Very often the rubber will be hard and showing some degree of stress cracks. *Note - Excludes all 1969-72 351, and 1973 351-4V engines. *Note - These molded and contoured hoses were designed to work with original style PCV valve (modern 90° PCV valves won't...

Price: $19.15

Buy Details

Availability: In-Stock Item
Item #: 41911 -

Concours for 1970 351C-2V and 351C-4V with correct ink stamped Ford script, 17 1/2" long including the 90 degree bend. Connects PCV valve to carburetor spacer plate. Other parts houses list this as a 71-73 but the 71-72 is 25" long (so it can reach to the front of the driver side valve cover) on both the 2V and 4v 351 Cleveland and this hose will not reach. This will work for the 1973 Q-code 351C-4V as the 73 mates to a metal tube and is only 11".This hose was originally installed from the...

Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24435 -

C8OZ-6A664-A Original used hose that connects the original PCV valve to the carburetor spacer plate. All 1968 X code 390-2V engines. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *Note - These molded and contoured hoses were designed to work with an original style PCV valve (modern 90° PCV valves won't work). Additionally anything other than period original intake manifolds, valve...

Price: $24.55

Buy Details

Availability: Out of Stock
Item #: 24086 -

C7TZ-6A664-B Used before 02-21-1969. Original used hose that connects the original PCV valve to the carburetor spacer plate. *Note - These molded and contoured hoses were designed to work with original style PCV valve (modern 90° PCV valves won't work). Additionally anything other than period original intake manifolds, valve covers, and spacer plates can also alter the position and distance in the relationship of the PCV valve and carburetor spacer plate. Click on images to enlarge. ...

Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24865 -

C9ZZ-6A664-A Used before 02/21/1969 Original used hose that connects the original threaded PCV valve combination with C7OZ-6A706-A elbow to the carburetor spacer plate. All early 1969 S code 390-4V engines. Molded hose with 5/8" valve end and 1/2" spacer plate end. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *Note - These molded and contoured hoses were designed to work with an original...

Price: $275.00

Buy Details

Availability: Rare / NOS Part
Item #: 33589 -

NOS ink stamped Ford script. Connects PCV valve to carburetor spacer plate. For all 289-2V, 289-4, 302-2V, and 302-4V engines. Ford part number C6AZ-6A664-N. These were held on with wire clamps, available here. Fits 1967-68 Mercury Cougar and 1966-69 Ford Mustang. *Note – These molded and contoured hoses were designed to work with original style PCV valve (modern 90° PCV valves won't work). Additionally keep in mind that most anything other than period original intake manifolds, valve covers,...

Price: $47.88

Buy Details

Availability: Out of Stock
Item #: 18501 -

C6AZ-6A664-N Original used hose that connects the original PCV valve to the carburetor spacer plate. All 289-2V, 289-4V, 302-2V, and 302-4V engines. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. Application for mid year 1966 through 1969 289/302 engines, including Cougar, Mustang, Falcon, Galaxie, Fairlane, Torino, Cyclone, Ranchero, and Comet. *Note - These molded and contoured hoses were...

Price: $52.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25302 -

D1OZ-6A664-B Original used hose that connects the valve cover mounted PCV valve and the carburetor spacer plate on 1971 through 1972 Mercury Cougar and Ford Mustang 351C or Cleveland engines only. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *Note - Excludes all 1969-71 351W or Windsor engines, 1970 351C or Cleveland, and 1973 351C engines. *Note - These molded and contoured hoses were...

Price: $10.05

Buy Details

Availability: In-Stock Item
Item #: 41761 -

Concours correct with ink stamped Ford script. Connects PCV valve to carburetor spacer plate. For all 289-2V, 289-4, 302-2V, and 302-4V engines. Ford part number C6AZ-6A664-N. These were held on with wire clamps, available here. *Note – These molded and contoured hoses were designed to work with original style PCV valve (modern 90° PCV valves won't work). Additionally keep in mind that most anything other than period original intake manifolds, valve covers, and carburetor spacer...

MSRP:$34.95
Price: $29.05

Buy Details

Availability: In-Stock Item
Item #: 41893 -

Connects PCV valve to PCV transfer tube on the 390, 427-4V, and 428CJ. Inside diameter on one end is .45" the other end is .58". These should be tough to get on so that they will form a vacuum seal. Originally held on with wire clamps, we have those available here  Replaces Ford Part #: C8AZ-6A664-D. Fits Many 1966, 1967, 1968, 1969, and 1970 Mercury Monterey, Marquis, Ford Galaxie, with FE 390 Big Block Engines. We aren't sure why this hose was reproduced as shown. However it will...

MSRP:$29.99
Price: $19.31

Buy Details

Availability: In-Stock Item
Item #: 41969 -

This hose is the hose most Mustang / Cougar parts vendors offer. It is a rubber flex hose with economy fittings. Two required per vehicle, sold individually. We do not recommend these hoses and can not stand behind them as they often will leak if not torqued to the proper specs. Use caution when tightening these down as they are susceptible to stripping if you torque them to the specs called for by FORD. Replaces Ford Part #: C6OZ-3A714-A or C6OZ-3A717-A. ...

Price: $55.67

Buy Details

Availability: In-Stock Item
Item #: 14295 -

These are economy replacement hoses by Scott Drake. Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. One piece design, meaning it differs from the original separate two piece pressure hose set. Upper and lower pressure hoses were what came on the cars originally. This hose is the hose most Mustang / Cougar parts vendors offer. It is a rubber flex hose with economy fittings. Use caution when tightening these down as they are susceptible to stripping if you...

Price: $31.35

Buy Details

Availability: In-Stock Item
Item #: 14082 -

These are economy replacement hoses by Scott Drake. Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. This hose will work as a return line for either a small or big block 1967 - 1970. This hose is designed for a 2 piece return line application, so to make it work you will need to also purchase a chunk of generic hose. This is needed to connect this hose to your power steering pump.  Depending on the routing of your hoses you will need a different...

Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33156 -

Used smog hose. Connects the smog pump to the check valve. 1967 Mercury Cougar and 1967 Ford Mustang with C and A code 289 engines, and typical California Thermactor smog system. Hose only, no clamps included. Hose is about 30 inches long with a 90 degree bend. Inside diameter is 3/4 inch. Ford part number C6OE-9H548-F.

Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33155 -

Used smog hose. Connects the metal "T" connector to the check valve. 1967 Mercury Cougar and 1967 Ford Mustang with C and A code 289 engines, and typical California Thermactor smog system. Hose only, no clamps included. Hose is about 19 inches long with a 90 degree bend. Inside diameter is 3/4 inch. Ford part number C7OE-9H534-A.

Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0077 -

1 3/8" hose that connects the vacuum motor to vacuum release valve. Often the white C9ZA-3D539-A and double white stripe imprint on this hose will be visible but not always. This hose measures 1 3/8" long.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Price: $17.27

Buy Details

Availability: In-Stock Item
Item #: 10365 -

Rubber bypass hose for 1967 Mercury Cougar with 289 engine. Additionally for all Ford products including Mustang with 221, 260, and 289 engines from 1962-67. Ink stamped C2OE-8597-A in white ink as shown.

Price: $17.27

Buy Details

Availability: In-Stock Item
Item #: 14079 -

Water By-Pass Hose for 351W engines with Autolite® logo and part number imprinted in white ink. Stamped with C9OE-8597-D. This would be correct for Mustangs and other Ford or Mercury with 302 engines in 1969. For some helpful tips on upgrading your Cougar (or Mustang) cooling system, check out our video: ...

Price: $17.27

Buy Details

Availability: In-Stock Item
Item #: 14032 -

Water By-Pass Hose with Autolite® logo and part number imprinted in white ink. Stamped with C2OE-8597-A. Replaces Ford Part #: C7OZ-8597

Price: $16.45

Buy Details

Availability: In-Stock Item
Item #: 30764 -

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 10/22/68

Price: $16.45

Buy Details

Availability: In-Stock Item
Item #: 30769 -

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 10/22/69

Price: $31.65

Buy Details

Availability: In-Stock Item
Item #: 30773 -

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 10/22/69

Price: $26.25

Buy Details

Availability: In-Stock Item
Item #: 30779 -

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or MustangDate code: 11/12/70

Price: $26.25

Buy Details

Availability: In-Stock Item
Item #: 30780 -

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or Mustang Date code: 12/10/70

Price: $31.65

Buy Details

Availability: In-Stock Item
Item #: 30774 -

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 12/15/69

Price: $16.45

Buy Details

Availability: In-Stock Item
Item #: 30765 -

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 10/22/68

Price: $31.65

Buy Details

Availability: In-Stock Item
Item #: 30775 -

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 2/12/70

Price: $27.82

Buy Details

Availability: In-Stock Item
Item #: 30781 -

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or MustangDate code: 2/12/71

Price: $16.45

Buy Details

Availability: In-Stock Item
Item #: 30766 -

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 2/18/69

Price: $31.65

Buy Details

Availability: In-Stock Item
Item #: 30776 -

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or MustangDate code: 5/19/70

Price: $16.45

Buy Details

Availability: In-Stock Item
Item #: 30767 -

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 5/2/69

Price: $31.65

Buy Details

Availability: In-Stock Item
Item #: 30770 -

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 5/2/69

Price: $17.18

Buy Details

Availability: In-Stock Item
Item #: 30762 -

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 6/18/68