All Products

Officially licensed center cap is an exact replica of the center cap installed on 1966 Shelby 10 spoke wheels. Authentic down to the smallest details. Each die-cast cap features the famous Shelby "CS" race track logo and a show quality chrome finish. The cap is secured in place with a backing plate and hardware to eliminate the risk of it coming lose or being stolen.To be used with the Legendary Series Shelby wheels. Shelby CS LogoFits GT7 - LW10 Series WheelsFits GT6 - LW66 Series Wheels Sold...

Reproduction chrome center cap with black background and chrome Mercury man logo. Correct for the 1967 or 1968 Mercury Cougar, but will fit any 1967-70 with style steel wheels. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. Replaces Ford part # C7WY-1130-B....

Chrome center caps with black background and chrome Mercury man logo.  Came from the factory on 1967 and 1968 Mercury Cougars with Style Steel Wheels, but will work on any 67-70 with Style Steel Wheels.Fits the following models with style steel wheels:1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury CougarOther Mercury CarsThese caps measure 2 1/2" wide by 9/16" tall. These have been obsolete for many years and often we find deterioration on them even though they...

Set of 4 reproduction chrome center caps with black background and chrome Mercury man logo. Better than original! Correct for the 1967 or 1968 Mercury Cougar, but will fit any 67-70 with Style Steel Wheels. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. OEM...

Reproduction chrome center cap with black background and chrome walking cat logo for the Mercury Cougar. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from the chrome outer portion. Instead of over torquing, we recommend a good...

Set of 4 reproduction chrome center caps with black background and chrome Walking Cat logo. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these center...

These never came from the factory. This is a reproduction of the original for 1967 and 1968 Mercury Cougars with Style Steel Wheels but with a different color background. Will work on any 67-70 with Style Steel Wheels. Set of 4 Chrome center cap with Solid Blue background and chrome Mercury Man logo. Better than original mounting! These reproduction caps are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other...

These originals had varying shades of blue, whereas the repro has a solid blue. VERY rare find in NOS form.Ford part # C9WY-1130-B

Set of 4 reproduction chrome center caps with Blue background and chrome Mercury man logo. Better than original! New from Scott Drake. These quality center caps feature our high quality chrome bezels. Check out the details in our "Cougar" lens. Also available in red & black. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these center caps.**NOTE** When installing these die cast center caps, keep in mind over tightening...

Set of 4 reproduction chrome center cap with red background and chrome Mercury man logo. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these...

Set of 4 reproduction chrome center caps with Red background and chrome Walking Cat logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the...

Reproduction center cap for the Cougars equipped with the wire spoke hubcaps / wheel covers. Most Cougars came with the black plastic center, not the Mercury Man logo. This cap does not have the Mercury Man center.Used in conjunction with Mercury cap part # C7WY-1130-C Check out the very first Cougar in our video below! ...

Reproduction chrome center cap bezel for the Mercury Cougar or Ford Mustang equipped with the wire spoke hubcaps / wheel covers. This is the chrome plated bezel that houses the black plastic emblem and covers the center of the wheel and the inside end of the chrome wire spoke hubcaps / wheel covers.*NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from the chrome outer portion. Instead of over torquing, we recommend a good threadlocker...

Used 2-1/8" plexi center cap emblem was used on standard model Mercury Cougars. You can expect the centers to be a bit faded, the background will have blemishes and all will likely have scratches across the face.The pictures above are a few examples of the quality of what we have left in stock. Ford part # C9WY-1137-C.*TRIVIA* Applique was the term used for this item by the industry back in 1969-70.

Used 2-1/2" standard center cap emblem. This unit looks the same as the 1969-70 version, but is a larger diameter. Ford part # D1WY-1137-A. *TRIVIA* Applique was the industry name for this item back in 1969-70.

Usually ships in 3-5 business days. Supplier is backordered on this product. Items may not ship until Feb 2023. This is a reproduction of the automatic transmission console for a 1967 Mustang but it also works on a 1968 Mustang. With the the addition of the two pads (Radio Pad and the Lower Pad: 1967 or 1968) it easily becomes a 1967 Cougar or 1968 Cougar console. ...

Usually ships in 3-5 business days. Reproduction Automatic Transmission Center Console With Woodgrain Insert and Flat Lid for the 1969 Mercury Cougar or Ford Mustang

Very correct reproduction, injection molded like original with correct grain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1969 style compartment box with cigar lighter, hinge for compartment lid, cigar lighter with correct knob and chrome mounting plate. While not technically correct for the Cougar, many...

Very correct reproduction, injection molded like original with correct grain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1969 style compartment box with cigar lighter, hinge for compartment lid, cigar lighter with correct knob and chrome mounting plate. While not technically correct for the Cougar, many...

This is a bare bones console with no lid or insert. It is actually a 1969 console base but can be converted to 1970 by changing out the storage compartment area with a used 1970 storage compartment with no lighter. 1970 owners may want to keep the lighter as it makes for a nice power port that is easier to access than the one on the dash. This is a good value for the person who already has a console but the base has been damaged. Made from ABS plastic that is paintable with any solvent based...

Reproduction teak woodgrain center console insert for the 1969 Ford Mustang. NOTE: These inserts came with enough studs to fit multiple cars. When installing this insert, simply clip off the extra studs you don't need.

Usually ships in 3-5 business days. This is a 3 or 4 speed console for a 1967 Mustang but with the the addition of the two pads it easily becomes a Cougar console. Although not visually correct, it will work just as well in a 1968 Mustang or Cougar. Click on images to enlarge. This console does not include the rear radio to console three piece bracket or the windlace that fits between lower dash and console base. The pictures here show the biggest downfall of this console. Right out of the box...

Very correct reproduction, injection molded like original with correct Burled woodgrain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, your choice of flat or humped lid, insert designed for cars with automatic transmission, dark walnut bezel (xr7 burl grain is NOW available!) front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1969 style compartment box with...

Very correct reproduction, injection molded like original with correct grain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1969 style compartment box with cigar lighter, hinge for compartment lid, cigar lighter with correct knob and chrome mounting plate. While not technically correct for the Cougar, many...

Very correct reproduction, injection molded like original with correct grain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1969 style compartment box with cigar lighter, hinge for compartment lid, cigar lighter with correct knob and chrome mounting plate. While not technically correct for the Cougar, many...

Very correct reproduction, injection molded like original with correct grain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, triple-humped lid, insert designed for cars with manual transmission, simulated burl walnut bezel (correct for XR7), front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1969 style compartment box with cigar lighter, hinge for compartment...

Very correct reproduction, injection molded like original with correct grain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, triple-humped lid, insert designed for cars with manual transmission, simulated burl walnut bezel (correct for XR7), front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1970 style compartment box with push button lid, hinge for compartment...

Pictured here is a representation of the console you can expect to get from us. Notice this is not a restored console, but rather a compilation made from several units taken out of parts cars to make one good example. As with the console shown here, it will not be perfect. If you would like to know where the blemish's are on the console you will receive, please contact us for details. Do know we understand how delicate they are and make every effort to ensure it is packaged properly. We do...

Reproduction upper portion to the center console found in the Mercury Cougar or Ford Mustang. This unit is a perfect fit in your Cougar or Mustang and features exact color and texture. It also comes with the front hooks to attach it to the lower base. The center console is a focal point of any cars interior and getting rid of that cracked, broken down old console will make a huge difference! *NOTE* This unit does not come with the ash tray assembly, but they're available used or reproduction. ...

Used upper portion to the center console found in the Mercury Cougar or Ford Mustang.  *When placing your order, please mention in the notes as to which color you need and we will do our best to accommodate. *NOTE* This unit does not come with the ash tray assembly, but they're available used or reproduction. Ford Part Number C9ZZ-6304490 ...

Good used console, please call for colors as you will not be getting the one shown in this file photo. The clock and harness is usually missing and the lid will show some amount of wear. The insert will have less than perfect mylar trim but will look great for a driver. The ashtray will also be dirtier than sin. We do offer all the used parts on this console individually but often will not have the color you desire. Keep in mind that we will break these consoles up and sell you only the...

Reproduction Automatic Transmission Center Console With Three Humped Lid for the 1970 Mercury Cougar or Ford Mustang, that does not include the console insert or the faux wood grain.

Reproduction Center Console With Three Humped Lid for the 1970 Mercury Cougar or Ford Mustang with a Manual Transmission.  This console does not include the console insert or the faux woodgrain.

Usually ships in 3-5 business days. Reproduction automatic transmission center console without insert, comes with a the flat lid armrest pad. If you need attaching screws, you can get them plain or wax coated.

Reproduction Manual Transmission Center Console With Flat Lid for the 1970 Mercury Cougar or Ford Mustang, that does not include the console insert or the faux wood grain. Made from ABS plastic that is paintable with any solvent based paint. Very correct reproduction, injection molded like original with correct grain surface. Assembly includes: Base with metal support bracketsupper console panel (where shifter plate mounts) with metal retainersfront ashtray receptacle holder with die cast lid...

Usually ships in 3-5 business days. Reproduction Automatic Transmission Center Console With Woodgrain Insert Flat Lid for the 1970 Mercury Cougar or Ford Mustang

Usually ships in 3-5 business days. Reproduction Manual Transmission Center Console With Woodgrain Insert Flat Lid for the 1970 Mercury Cougar or Ford Mustang

Usually ships in 3-5 business days. Very nice, affordable console that is made from modern, sturdy plastic components. Often times the original consoles are very brittle after years of exposure and will crack easily. The console does not come with a clock but does have a clock delete plate included that can be modified to install gauges or a USB port.

Sprayed with black flocking on the front side and color coded to the console base on the rear side. We have several colors in stock but cannot guarantee you will get your desired color. Will have at least one broken tab for mounting. A drop or two of glue will be needed to attach to the console.

Reproduction center console back plate, or divider, for the 1967 - 1968 Cougar or Mustang center console. includes Light.Replaces Ford part number C3SZ-14A163-B

Call 503-463-1130 for your needs. Many different console bases depended upon year, with or without air conditioning, automatic or manual transmission, XR7 or Standard, and don't forget color.If all we have done is confuse you on what the many differences are and which base you need for your 1967 - 1968 Cougar, this listing may help. Just choose which of the 14 configurations you need. All of our 50 year old bases have some amount of cracks, chips or extra holes drilled. Please contact us...

In the form that is shown, the application for this plastic base is for a non AC car with an automatic transmission. It can easily be cut for an A/C equipped car or a manual transmission, we offer the modification at no cost.  This base is designed for a 1967 standard with AT model but with slight modifications it will work on all models 67-68 manual and AT transmission vehicles. Made from modern injection molded plastic, you will find this is a very sturdy base and the textured...

Good used base with no visible cracks, burns or extra holes drilled. The Cougars equipped with air conditioning had the last few inches trimmed off. It is a rather rough, hand cut from the factory. Standard is different from XR7 in that the XR7 had two holes drilled in the base towards the back to fasten the top pad. The standard base has no metal clip on the top side, midway as the chrome shifter bezel clips into the larger chrome bezel under the top pad. *NOTE* The base shown has been cut...

Good used base with minimal cracks. The Cougars equipped with air conditioning had the last few inches trimmed off. It is a rather rough, hand cut from the factory. Standard is different from XR7 in that the XR7 had two holes drilled in the base towards the back to fasten the top pad. The standard base has no metal clip on the top side, midway as the chrome shifter bezel clips into the larger chrome bezel under the top pad. All of our 50 year old bases have some amount of cracks, chips or...

Good used base with no cracks. The Cougars equipped with air conditioning had the last few inches trimmed off. It is a rather rough, hand cut from the factory. The 1968 standard base is different from 1967 standard base in that the 68 had two holes drilled in the base towards the back to fasten the top pad, there is no metal clip to hold the chrome shifter bezel in place as the chrome shifter plate is on top the pad and there are embossed areas on the underside for three Phillips screws to...

Good used base with no cracks. The Cougars equipped with air conditioning had the last few inches trimmed off. It is a rather rough, hand cut from the factory. Standard is different from XR7 in that the XR7 had two holes drilled in the base towards the back to fasten the top pad and a gray plastic part with two hole in it was in place to attach the top pad with spring clips. All of our 50 year old bases have some amount of cracks, chips or extra holes drilled. Please contact us for condition...

The Mustang and Cougar have identical consoles for the 1971 - 1973 model years. This is a premium quality bezel that houses the clock and surrounds the manual or automatic shifter. They are available in black or natural finish, if you have a color other than black you will want to select "Natural Finish"(click on smaller image too see natural finish). The natural finish is actually black as well but not the "correct gloss" of black. We recommend SEM brand plastic and vinyl paint, available at...

This listing includes all parts shown here. It is correct for a 1967 Mustang but for those 1967 Cougar owners looking to delete the tired, warped, peeling old pads this is a great way to clean up a very focal part in your interior. These items can also replace the very hard to find 1968 console parts found in both the Mustang and Cougar but look much different than the 1968 style. Keep in mind West Coast Classic Cougar will take your Grade A 1967 or 1968 used console parts in trade. ...