Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
'https://cdn.cougparts.com/dc/19951/1633385650_z.jpg','https://cdn.cougparts.com/dc/19951/1633385649_k.jpg'
  • Clip - Moulding / Trim Retainer - Front Windshield / Rear Window - EACH - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang - 19951
  • Clip - Moulding / Trim Retainer - Front Windshield / Rear Window - EACH - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang - 19951

Item #: 19951

Login to add this item
to a saved wishlist
Price: $0.85
    Cost: 68
    Earns: 4
    Bonus: 0

    Availability

    In-Stock Item - Ships: Next Business Day

    Applications

    Description

    These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.

    Sold Individually.

    We recommend buying the box of 100 clips to be certain you have enough clips with plenty to spare. You'll also save money! 

    Clip Guide
    Vehicle # of Clips
    1967 - 1968 Front 22
    1967 - 1968 Rear 20
    1969 - 1970 Front 13
    1969 - 1970 Rear 24
    1971 - 1973 Front 16
    1971 - 1973 Rear 18



    These clips attach to posts built in to the car. In case you're missing some of these posts, we have repair studs you can use to replace them. Here's a handy diagram we put together to show where these posts go on the front of a 67-68 Cougar or Mustang (click image to enlarge):


    Check out our windshield installation video below for some tips on how to tackle this job:
    Windshield Installation - 1967-68 Cougar / Mustang
    Specifications:
    Shipping Weight: 0.01 LBS
    (weight shown may be the dimensional weight)

    This item must ship via

    review-star review-star review-star review-star review-star

    4.88 out of 5 stars
    Based upon 17 Review(s).
    5 Stars
    88%
    4 Stars
    6%
    3 Stars
    6%
    2 Stars
    0%
    1 Stars
    0%

    Clip-Moulding/Trim Retainer-Front Windshield/Rear Window-EACH-67 to 73 Merc Cougar

    3.75 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    • Not a big fan of these
    • Some bent
    • Glad I ordered extras
    Not a big fan of these. Although these are supposed to be the longest available, they were still too short when I installed the rear window trim on my 69 Cougar. The vinyl top material adds additional distance to close the gap and I gave it everything I had to snap these in place; I even tried warming the vinyl up with a hair dryer to no avail. I'm glad I ordered extras since several of the clips bent and were unusable.

    Austria
    2019

    Rear Windshield XR7

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Good replacement

    2019

    Clip - Moulding / Trim Retainer - Front Windshield / Rear Window

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • Easy install
    • Correct trim location
    Cons:
    Took a while but I was glad I waited to use the ones that you sell. I had others from another vendor and they were hard to install and didn't seem quite right. I got these and they worked perfect. Easy to install and held the trim (rear) at the right height.

    2018

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Haven’t used them yet, but look good quality..

    2016

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Just like the originals

    Number of questions: 1
    Please login to ask a question.
    Question
    Jims69 Asked:
    Any tricks to installing these clips? The OEM clips snap right in with no problem using a putty knife pressed against the lower lip of the clip, but these clips have a much smaller lip and the tool slides off. Any suggestions would be appreciated.
    August 23, 2024 7:23 PM

    Why am I being warned about potential exposure to chemicals in motor vehicle parts?


    • Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
    • When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
    • This product is known to contain the following listed chemicals:
    <p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...
    - Dean
    I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...
    - MartinD
    My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...
    - Frank
    Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...
    - Mike Dunlap
    WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...
    - Jim Davis
    I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...
    - Voodochild5
    What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...
    - Kenneth Milden
    I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...
    - Denver
    I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...
    - pandamonium2112
    I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...
    - Rod (Saskatchewan, Canada)
    B1D01