Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3505-3552 of 13397
$0 Price: $76.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24502 -

Fan spacer measuring 1-1/4 inches. Application includes 1969 Mercury Cougar and Ford Mustang with Boss 302 or 428 Super Cobra Jet engines. Additionally it was likely used on 1971 cars with 351-2V engines and standard cooling. Reference number YA-20, cross reference to D1OA-8546-AA spacer.Ford part # C8YE-8546-A, Ford engineering number C8YZ-8546-A.

$0 Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25285 -

Fan spacer, measuring 1-1/4 inches, but referenced at 1-9/32" too. Application includes 1971 - 1973 Mercury Cougar and Ford Mustang with 351-2V engines and standard cooling. Reference number YA-20, cross reference to C8YE-8546-A spacer.Ford part # D1OA-8546-AA, Ford engineering # C8YZ-8546-A.

$0 Price: $65.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24993 -

Fan spacer, measuring 2-1/4 inches or sometimes mentioned as 2-8/32". Application includes 1970 Mercury Cougar and Ford Mustang with Boss 302 engines, or 351 engines with extra cooling or air conditioning. Reference number YA-31.Ford part # D0AE-8546-A, Ford engineering # D0AZ-8546-A.

$0 Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25492 -

Fan spacer, measuring 2-5/8 inches. Application 1972 - 1973 Mercury Cougar and Ford Mustang with 351-4V or 351CJ, and all 1971-72 351's with air conditioning. Reference number YA-75.Ford part # D2AE-8546-AA, Ford engineering # C4AZ-8546-G.

$0 Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24338 -

Fan spacer, measuring 2-7/16 inches, sometimes mentioned as 2.44". Application includes 1971 Mercury Cougar and Ford Mustang with 351 engines and air conditioning. Reference number YA-74.Ford part # C8AE-8546-E, Ford engineering # C4AZ-8546-F.

$0 Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23859 -

Fan spacer, measuring 2-7/8 inches, sometimes mentioned as 3.15" overall. Applications include 1967-68 Mercury Cougar and Ford Mustang with 289/302 and standard cooling. Reference number YA-79.Ford part # C5OE-8546-A, Ford engineering # C5OZ-8546-A.

$0 Price: $21.87

Buy Details

Availability: Out of Stock
Item #: 23839 -

Fan spacer, measuring 3-1/16 inches, sometimes mentioned as 3.40" overall. Applications include 1967 Mercury Cougar and Ford Mustang with 289-4V. Reference number YA-78.Ford part # C5AE-8546-B, Ford engineering # C5AZ-8546-B.

$0 Price: $26.87

Buy Details

Availability: In-Stock Item
Item #: 10895 -

Reproduction radiator fan spacer for fixed or flex fans. Can be used on 1967-73 Mercury Cougar and 1964-73 Fords and Ford Mustangs. Ideally the various length spacers were used to place the fans half way into the fan shrouds for optimal cooling. Original Ford part number C4AZ-8546-A.

$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0290 -

Metal fan wheel or squirrel cage for any 1967-68 Mercury Cougar or Ford Mustang with heater only. Dimensions 4-1/4 inches in diameter and 2-1/2 inches tall. Shipped used as they come out of the cars, most will need cleaning and have light pitting. Some variations in the stampings, come 'as balanced' from the factory. Comes with allen set screw.

$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0289 -

Metal fan wheel or squirrel cage for any 1967-73 Mercury Cougar or Ford Mustang with factory air conditioning only. Dimensions 5-3/4 inches in diameter and 4-1/8 inches tall. Shipped used as they come out of the cars, most will need cleaning and have light pitting. Some variations in the stampings, come 'as balanced' from the factory. Comes with allen set screw.

$0 Price: $18.15

Buy Details

Availability: In-Stock Item
Item #: 26146 -

Reproduction alternator mounting kit for the Mercury Cougar or Ford Mustang equipped with the 390 or 428 engine. Spacer not included, but available.

$0 Price: $39.85

Buy Details

Availability: In-Stock Item
Item #: 33091 -

 2 piece fuel line. Kit is for fuel and brake lines under the car. Comes as shown. Quality AMK kit. Fits 1967 Mercury Cougar and Ford Mustang. F-3962

$0 Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 41052 -

Reproduction brake and fuel line clamp kit for Mercury Cougar and Ford Mustang.

$0 Price: $22.55

Buy Details

Availability: In-Stock Item
Item #: 14074 -

If your fuel line follows the brake line down the transmission tunnel then you have an early model 1967 and this is the right clip set for you!

$0 Price: $44.85

Buy Details

Availability: In-Stock Item
Item #: 41051 -

This quality kit contains everything you need to replace the original hardware for fuel and brake lines on your 1968 Cougar or V8 Mustang. It even includes 3 new bolts for the metal protector plate for the fuel line near the left rear wheel. Most of the mounting locations can be seen below: Click on images to enlarge. ...

$0 Price: $40.05

Buy Details

Availability: In-Stock Item
Item #: 41147 -

All the nuts, bolts, shims and washers needed to mount the bumper brackets to the frame and then the bumper to the bumper brackets. This kit includes foam looking washers to cover the bumper bolt holes.  This is not technically correct.  From the factory the originals would used a gooey tar based sealant that does not harden.

$0 Price: $58.95

Buy Details

Availability: In-Stock Item
Item #: 41148 -

Complete front and rear bumper mounting hardware for the 1969 Mercury Cougar.

$0 Price: $22.91

Buy Details

Availability: In-Stock Item
Item #: 13894 -

Bolts, washers, and spacers kit for installing the rear bumper brackets on any 1969-70 Mercury Cougar or Ford Mustang.

$0 Price: $16.05

Buy Details

Availability: In-Stock Item
Item #: 41106 -

Reproduction Fastener Kit - Deck / Trunk Lid & Hinges for the 1968 Mercury Cougar / 1968 Ford Mustang 

$0 Price: $187.55

Buy Details

Availability: In-Stock Item
Item #: 41173 -

AMK engine fastener kit for 1971 Mercury Cougar and Ford Mustang with J or C code 429 Cobra Jet engines. This kit claims to have 136 pieces. This kit additionally fits 1970-71 Ford Torino and Mercury Cyclone and other variants with 429CJ engine.Kit typically includes: fasteners to attach air cleaner, carburetor, crank pulley, distributor / points / condenser / vacuum advance, drain plugs, engine tag, exhaust manifolds, fan / fan clutch, fuel pump, shroud, ignition coil and strap, intake...

$0 Price: $46.95

Buy Details

Availability: Out of Stock
Item #: 41468 -

Correct black phosphate bolts for use with 289 HiPo (K-code) exhaust manifolds. Although Cougars never offered a HiPo 289, the HiPo manifolds will fit any 67-68 289 or 302.

$29.00 Price: $38.95

Buy Details

Availability: In-Stock Item
Item #: 41281 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$27.00 Price: $42.30

Buy Details

Availability: In-Stock Item
Item #: 13924 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$26.00 Price: $33.25

Buy Details

Availability: In-Stock Item
Item #: 41287 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$26.00 Price: $45.36

Buy Details

Availability: In-Stock Item
Item #: 41285 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$29.00 Price: $44.37

Buy Details

Availability: In-Stock Item
Item #: 41282 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds. 390 and 427-4V engines without exhaust heat risers. That kit would include a studded bolt for the heat shield. See item 41282.

$35.00 Price: $51.55

Buy Details

Availability: In-Stock Item
Item #: 41289 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$0 Price: $62.91

Buy Details

Availability: In-Stock Item
Item #: 41298 -

Reproduction fender fastener kit for Mercury Cougar Standard and XR7.

$0 Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 27593 -

New improved set of 6 screw for the glove compartment hinge on all 1967-68 Mercury Cougar and Ford Mustangs. Three 10-24 bolts with 0.72" conical washer heads to go into dash, and three 10-24 bolts with 0.50" conical washer heads to attach to glove box door. This is an updated proper kit for 1967-68 Mercury Cougar and Ford Mustang glove box door hinge. All AMK bolts, but WCCC special recipe. 6 pieces as shown.

$0 Price: $8.78

Buy Details

Availability: In-Stock Item
Item #: 41072 -

Fits standard and XR7 Sold as a Kit as Pictured. Check out this video

$0 Price: $18.59

Buy Details

Availability: In-Stock Item
Item #: 41115 -

Reproduction grille mounting kit for the driver (left hand) and passenger (right hand) sides of the Mercury Cougar.

$0 Price: $8.05

Buy Details

Availability: In-Stock Item
Item #: 41116 -

Reproduction mounting kit for the center grill for the Mercury Cougar. Check out this video

$0 Price: $18.35

Buy Details

Availability: In-Stock Item
Item #: 41300 -

These reproduction hood and hinge bolts and U nuts fir both the Standard and XR7.

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 41078 -

This reproduction hood latch and catch screw and U nut kit fits both the Standard and XR7 and is sold as a kit as pictured.

$0 Price: $9.32

Buy Details

Availability: In-Stock Item
Item #: 41080 -

This reproduction hood latch vertical support screw and U nut kit fits both the Standard and XR7 and is s sold as a kit as pictured.