Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 12001-12048 of 13397
$0 Price: $47.88

Buy Details

Availability: Out of Stock
Item #: 24584 -

C9AZ-6A664-A Original used hose that connects the valve cover oil cap mounted PCV valve and the front of the Quadrajet carburetor base plate on 1970 through 1971 Mercury and Ford 429 Cobra Jet engines only. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *Note - These molded and contoured hoses were designed to work with original style PCV valve (modern 90° PCV valves won't work)....

$0 Price: $47.88

Buy Details

Availability: Out of Stock
Item #: 18590 -

D0AZ-6A664-C Original used hose that connects the valve cover mounted PCV valve and the carburetor spacer plate on 1970 Mercury Cougar and Ford Mustang 351 Cleveland engines both 2 and 4 barrel versions."L" shaped hose, 1/2" in diameter, approximately 15-1/4 inches long. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *Note - Excludes 1969-70 351W or Windsor engines. *Note - These molded and...

$0 Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18541 -

C9OZ-6A664-A Original used hose that connects the original PCV valve to the carburetor spacer plate. All 1969-70 351 Windsor 2V and 1969 351Windsor 4V engines. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. This hose is a bit longer than the 289/302 version due to the taller deck height of the 351 Windsor engines. *Note - These molded and contoured hoses were designed to work with the...

$0 Price: $47.88

Buy Details

Availability: Out of Stock, On Order
Item #: 26217 -

C7TZ-6A664-A Used after 02-21-1969. Original used hose that connects the original PCV valve to the carburetor spacer plate. All later 1969 S code 390-4V engines. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *NOTE* These molded and contoured hoses were designed to work with original style PCV valve (modern 90° PCV valves won't work). Additionally anything other than period original intake...

$0 Price: $80.87

Buy Details

Availability: Out of Stock
Item #: 25234 -

D0ZZ-6A664-A Original used hose that connects the original threaded PCV valve combination with C7OZ-6A706-A elbow and the carburetor spacer plate. Molded hose with 5/8" valve end and 3/8" spacer plate end. 1970 428CJ and 428SCJ engines, includes Cougar and Mustang only. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *Note - Excludes 1967-69 S code 390-4V and 1968-69 428CJ engines. See part...

$0 Price: $52.88

Buy Details

Availability: Out of Stock
Item #: 25302 -

D1OZ-6A664-B Original used hose that connects the valve cover mounted PCV valve and the carburetor spacer plate on 1971 through 1972 Mercury Cougar and Ford Mustang 351C or Cleveland engines only. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *Note - Excludes all 1969-71 351W or Windsor engines, 1970 351C or Cleveland, and 1973 351C engines. *Note - These molded and contoured hoses were...

$0 Price: $47.88

Buy Details

Availability: Out of Stock
Item #: 24301 -

C7ZZ-6A664-B Original used hose that connects the original threaded PCV valve combination with C7OZ-6A706-A elbow and the 390 PCV transfer tube on the intake manifold. Molded hose with 5/8" valve end and 1/2" tube end. All 1967-68 S code 390GT or 390-4V engines and 1968-69 428CJ and 428SCJ engines, includes Cougar, Mustang, Fairlane, Torino, Ranchero, Cyclone, and Comet. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some...

$0 Price: $18.86

Buy Details

Availability: Out of Stock
Item #: 31457 -

Used vacuum hose connects the Regulator to intake manifold on 1967-68 Mercury Cougar and Ford Mustang. Red striped hose about 20.34 inches long. Ford number for hoses is C7ZA-9C770-B.

$0 Price: $18.86

Buy Details

Availability: Out of Stock
Item #: 31450 -

Used vacuum hose connects the Regulator to Servo Valve on 1967-68 Mercury Cougar and Ford Mustang. Yellow striped hose about 14.09 inches long. Ford number for hoses is C7ZZ-9C746-A.

$0 Price: $12.87

Buy Details

Availability: Out of Stock
Item #: 11026 -

D2PZ-8597-A New Old Stock service replacement. Fits 260/289/302 engines from 1966-69. The water bypass hose goes between the water pump and water neck that attaches to the intake manifold.

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 31475 -

Used vacuum hose with inline muffler, connects the Servo Valve to the Regulator on 1969 Mercury Cougar and Ford Mustang with factory Speed Control. Hose about 42.7509 inches long. Ford number for hoses is C9ZZ-9D860-A.

$0 Price: $46.85

Buy Details

Availability: Out of Stock
Item #: 23881 -

Left side. Bracket to hold the junction of the steel brake line and the rubber brake hose. Mounts to the frame rail. Fits 1967 Mercury Cougar and Ford Mustang with factory installed Kelsey Hayes 4 puck disc brakes only.Ford part number C5ZZ-2082-D.

$0 Price: $46.85

Buy Details

Availability: Out of Stock
Item #: 23880 -

Right side. Bracket to hold the junction of the steel brake line and the rubber brake hose. Mounts to the frame rail. Fits 1967 Mercury Cougar and Ford Mustang with factory installed Kelsey Hayes 4 puck disc brakes only.Ford part number C5ZZ-2082-C.

$0 Price: $78.57

Buy Details

Availability: Out of Stock
Item #: 11008 -

Good used original power steering lower hose bracket and retainer with a new reproduction insulator installed in place of the original crusty or missing insulator.This bracket is for cars with the big block routed power steering hoses.

$0 Price: $228.87

Buy Details

Availability: Out of Stock
Item #: 24147 -

This is what is referred to as a campaign part. It was found that the early 1967 Cougars were having some issues with the headlights and this revised hose kit with ground strap was the fix. Often these have been found opened on dealers shelves with the "near new" take off hoses placed back in the original box. This is a great find for the guy wanting to do a concours restoration on his 1967 Mercury Cougar. Not for use on a 1968 as the switch was located under the dash as opposed to next to the...

MSRP:$369.99
$369.99 Price: $308.35

Buy Details

Availability: Out of Stock
Item #: 26800 -

Concours quality, includes check valve.

MSRP:$210.02
$210.02 Price: $172.75

Buy Details

Availability: Out of Stock, On Order
Item #: 42303 -

1967 - 1970 390, 427 and 428 & 1969 - 1970 302 and 351:  This is the correct control valve end hoses that comes from the power steering pump on all big blocks and the 1969 and 70 small blocks. This hose has industrial high pressure fittings that are much higher quality than those available by most Mustang / Cougar Parts Dealers. Includes both Pressure and Return hose that connect to the control valve. * 1967 - 1968 289 and 302:  This big block routing is far superior to the...

$90.00 Price: $101.85

Buy Details

Availability: Out of Stock
Item #: 31363 -

The tubbing bends are all "spot on" and the portion that passes through the rubber insulator are identical to NOS. You will not find these at your local auto parts store or the the "Mustang Discount" folks. Replaces Ford Part Numbers: C7OZ-3A719-A, C7OZ-3A719-C, C7OZ-3A713-A, C7OZ-3A713-C, C7OZ-3A713-D. Please Note: We highly recommend upgrading to the large nut (5/16") control valve as the small nut (1/4") control valve posses a potential safety issue, thus the reason why Ford replaced it the...

MSRP:$225.00
$225.00 Price: $199.25

Buy Details

Availability: Out of Stock
Item #: 11648 -

Power steering hose kit w/ passenger cooler for the FE big block engines on the 67-70 Cougar or Mustang. Click this link for more clarity on power steering hoses: https://secure.cougarpartscata...

MSRP:$210.00
$210.00 Price: $187.45

Buy Details

Availability: Out of Stock
Item #: 11647 -

We are one of the only Mustang / Cougar vendors that carry "correct" power steering hoses for your early, big block Cougar or Mustang. The tubing bends are all "spot on" and the portion that passes through the rubber insulator are identical to NOS. You will not find all of these hoses at your local auto parts store or the the "Mustang Discount" folks. Fits the FE Big Block 390, 427 & 428 Mercury Cougar or Ford Mustang without Power Steering Cooler.   Click this link for more clarity...

$0 Price: $28.89

Buy Details

Availability: Out of Stock
Item #: 10940 -

Good used power steering pressure line hose retainer. Mounts on top of the shock tower brace as shown. Comes as shown with used rubber insulator. Fits all 1971-73 Mercury Cougar and Ford Mustangs with V-8 engines. Ford part # D1ZZ-3C510-A.

$34.85 Price: $76.85

Buy Details

Availability: Out of Stock
Item #: 31696 -

Used rear driver side (left hand) courtesy / opera light housings for the Mercury Cougar. The rear courtesy / opera light was standard on all XR7 Cougars, but were a popular option on decor and standard level interior Cougars. These units are marked LH for the driver side and RH for the passenger side and are sold individually. Also sold as a PAIR. Ford part # C7WB-13B729-C or C7WY13A744-C for the passenger side, C7WB-13B736-C or C7WY-13A744-D for the driver side. *TRIVIA* Did you know that...

$34.85 Price: $74.85

Buy Details

Availability: Out of Stock
Item #: 31697 -

Used rear passenger side (right hand) courtesy / opera light housings for the Mercury Cougar. The rear courtesy / opera light was standard on all XR7 Cougars, but were a popular option on decor and standard level interior Cougars. These units are marked LH for the driver side and RH for the passenger side and are sold individually. Also sold as a PAIR. Ford part # C7WB-13B729-C or C7WY13A744-C for the passenger side, C7WB-13B736-C or C7WY-13A744-D for the driver side. *TRIVIA* Did you know...

$34.85 Price: $129.85

Buy Details

Availability: Out of Stock
Item #: 11516 -

Used rear driver side (left hand and passenger side (right hand) courtesy / opera light housings for the Mercury Cougar. The rear courtesy / opera light was standard on all XR7 Cougars, but were a popular option on decor and standard level interior Cougars. These units are marked LH for the driver side and RH for the passenger side. Also sold individually, see related items. Ford part # C7WB-13B729-C or C7WY13A744-C for the passenger side, C7WB-13B736-C or C7WY-13A744-D for the driver side....

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 24423 -

Used grade A near perfect dog dish style hubcap / Wheel Cover for the 1970 Mercury Cougar Eliminator. This same cap was standard equipment for the 1971-73 Mercury Cougar and was used with dealer installed trim rings when the optional 15x7" wheels were ordered on 1971-72 Cougars. There were two versions for this cap, one had a brushed finish where the other had a bright finish. These are all driver quality with some dings and or scratches. The one pictured is brushed, but we often have both in...

$0 Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 31045 -

Used grade B less than perfect with a couple dings / scratches / blems dog dish style hubcap / Wheel Cover for the 1970 Mercury Cougar Eliminator. This same cap was standard equipment for the 1971-73 Mercury Cougar and was used with dealer installed trim rings when the optional 15x7" wheels were ordered on 1971-72 Cougars. There were two versions for this cap, one had a brushed finish where the other had a bright finish. These are all driver quality with some dings and or scratches. The one...

$0 Price: $74.88

Buy Details

Availability: Out of Stock
Item #: 31080 -

Used A grade dog dish style hubcaps / wheel covers for the Mercury Cougar as well as other Mercury and Ford products. Used item as would have been found on 1969 Eliminators as well as other models with the plain poverty or dog dish center cap, about 7-1/2 inches in diameter. Replaces Ford part # C8OZ-1130-G, or C8MY-1130-A. Fits: 1969 Mercury Cougar Eliminator / Cyclone1970 Mercury Cougar Eliminator / Cyclone1971 Mercury Cougar / Cyclone1972 Mercury Cougar 1973 Mercury Cougar 1969 Ford Mustang...

$195.00 Price: $309.87

Buy Details

Availability: Out of Stock
Item #: 31078 -

New Old Stock dog dish style hubcap / wheel cover with the Mercury Man center cap for the Mercury Montego. This very rare optional unit was used in conjunction with the 14x6" 16 hole GT wheel commonly found on Mustangs and Torinos in 1968. This hubcap / wheel cover was offered only in 1968 and rarely seen on a Cougar as it would have only been offered as an over the counter option at your Mercury dealership. The more common application for this unit would be the 1968 Mercury Montego or...

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 20447 -

Used grade A near perfect dog dish style hubcap / Wheel Cover for the 1970 Mercury Cougar Eliminator. This same cap was standard equipment for the 1971-73 Mercury Cougar and was used with dealer installed trim rings when the optional 15x7" wheels were ordered on 1971-72 Cougars. There were two versions for this cap, one had a brushed finish where the other had a bright finish. These are all driver quality with some dings and or scratches. The one pictured is brushed, but we often have both in...

$0 Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 31046 -

Used grade B less than perfect with a couple dings / scratches / blems dog dish style hubcap / Wheel Cover for the 1970 Mercury Cougar Eliminator. This same cap was standard equipment for the 1971-73 Mercury Cougar and was used with dealer installed trim rings when the optional 15x7" wheels were ordered on 1971-72 Cougars. There were two versions for this cap, one had a brushed finish where the other had a bright finish. These are all driver quality with some dings and or scratches. The one...

$0 Price: $169.88

Buy Details

Availability: Out of Stock, On Order
Item #: 16181 -

Used Grade A hubcap, which was available optionally on any 1970 Mercury Cougar, these were called Rallye hub caps. We believe that these were special order and a mid year introduction to the 1970 Mercury Cougar. Called out on Marti Reports as 'Rallye Wheel Cover', and have been documented on Mercury Cougar Eliminator and XR7, as well as standard model Cougars and convertibles. Grade A will not have noticeable scrapes from the curb. Very uncommon hubcap, we never have grade A full sets in...

$0 Price: $129.87

Buy Details

Availability: Out of Stock, On Order
Item #: 13126 -

Used Grade A Rallye hubcap, which was available optionally on any 1970  and newer Ford Torino, Ranchero, etc. these were called Rallye hub caps. Called out on Marti Reports as 'Rallye Wheel Cover'. Grade A will not have scrapes from the curb. Fairly uncommon hubcap, we seldom have full sets in stock. The cap intended for Mustangs had a running horse emblem in the center.Replaces Ford part number D0OZ-1130-D.*Note - This cap is only intended for 14 X 7 stock steel wheels wheels. ...

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 13368 -

Used Grade B Rallye hubcap, which was available optionally on any 1970  and newer Ford Torino, Ranchero, etc. these were called Rallye hub caps. Called out on Marti Reports as 'Rallye Wheel Cover'. Grade B will have some dents and scrapes from the curb, and likely fading and chrome issues with the red back ground Ford center cap. Fairly uncommon hubcap, we seldom have full sets in stock. Mustangs are different, they had a running horse in the center cap.Replaces Ford part...

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 16126 -

Used Grade B Rallye hubcap, which was available optionally on any 1970 Mercury Cougar, these were called Rallye hub caps. We believe that these were special order or a mid year introduction to the 1970 Mercury Cougar. Called out on Marti Reports as 'Rallye Wheel Cover', and have been documented on Mercury Cougar Eliminator and XR7, as well as standard model Cougars and convertibles. Grade B will have some dents and scrapes from the curb, and likely fading and chrome issues with the black back...

$0 Price: $259.88

Buy Details

Availability: Out of Stock
Item #: 30996 -

NOS hubcap, which was available optionally on any 1970 Mercury Cougar, these were called Rallye hub caps. We believe that these were special order and a mid year introduction to the 1970 Mercury Cougar. Called out on Marti Reports as 'Rallye Wheel Cover', and have been documented on Mercury Cougar Eliminator and XR7, as well as standard model Cougars and convertibles. Replaces Ford part number D0WY-1130-B. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard...

$0 Price: $83.88

Buy Details

Availability: Out of Stock
Item #: 24037 -

Used spinner hubcap / wheel cover for the Mercury Cougar. This was and optional inset spinner that bolted onto your existing hubcap. 1968 was the first year the dealer option was available. Ford part # C7MA-1130-F

$0 Price: $189.86

Buy Details

Availability: Out of Stock
Item #: 31536 -

NOS turbine style hubcap / wheel cover for the Mercury Cougar and Montego. These are the same as the 1969 Sports Special / 1968 Dan Gurney hubcap / wheel cover, but have the Mercury logo glued in the center. Ford part # C8GY-1130-G. Fits: 1968 Mercury Montego

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 16004 -

Used grade "A" XR7 hubcap / full wheel cover for the XR7 Mercury Cougar. The 1969 version of this hubcap / wheel cover used a white stripe around the center where the 1970 used black. Our grade "A" cap will have a minimal amount of scratches. Ford part # C9WY-1130-A.

$0 Price: $193.86

Buy Details

Availability: Out of Stock
Item #: 25110 -

New Old Stock XR7 hubcap / wheel cover for the Mercury Cougar. There were two versions of this cap, one with a white painted ring around the center, and one with black around the center. The white version was used in 1969, with the black version being used in 1970. Ford part # D0WA-1130-A

$0 Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 10826 -

Used Grade A XR7 turbine style hubcap / wheel cover for the Mercury Cougar XR7. This unit was factory installed on the XR7 and will more than likely come with a faded center decal. These are almost impossible to find with a nice bright red center on the cars we drag into the yard. You should also expect that the black portions will need to be repainted and that there will be minor scratches around the perimeter, but no curb rash. This is a one year only hubcap / wheel cover that has 22 black...

$0 Price: $224.87

Buy Details

Availability: Out of Stock
Item #: 32933 -

NOS Grade A XR7 turbine style hubcap / wheel cover for the Mercury Cougar XR7. This unit was factory installed on the XR7 and was a one year only hubcap / wheel cover that has 22 black ribs. The Mercury MPC states that these caps were not to be sold in Pennsylvania. Ford part # C8WY-1130-D.Fits: 1968 Mercury Cougar XR7

$0 Price: $194.85

Buy Details

Availability: Out of Stock
Item #: 22957 -

The Hustler Stick features heavy-duty 1-1/4" diameter tubing, and is an alignment bar designed for bumpers, hoods, decks, panels etc. Made in the USA, it has a 1/4", 6 foot long chain with hooks at each end. This versatile tool is very useful in shaping damages on a vehicle body. To use it, hook it up to the panel or bumper, anchor the stick properly, and pull it by hand.We will loan this hustler stick for 60 days, with a 100% refundable purchase price. Tool must be returned in undamaged...

$0 Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 18935 -

Tag marked HBA-BF or HBA-BF1 for use on 1967-68 Cougar and Mustang with power steering pumps originally installed on 289/302/390/427 and all 1968 428CJ engines. Various dates, and could be designated for either a Ford-Thompson (F) or TRW (W) power steering pump. For 1969 dated tags please see the related listing.*Please Note - Current inventory is exclusively 1967-68.

$0 Price: $35.87

Buy Details

Availability: Out of Stock
Item #: 25660 -

Tag marked HBA-BR for use on 1970 Cougar and Mustang with power steering pumps originally installed on 428 Cobra Jet engines only. Could be designated for either a Ford-Thompson (F) or TRW (W) power steering pump. *Note - 1970 428CJ only.

$0 Price: $98.87

Buy Details

Availability: Out of Stock
Item #: 31977 -

Fits all 1971-73 Mercury Cougar and Ford Mustang with factory power or manual steering. Rarely did these last 60,000 miles. To find one after 50 plus years is quite a find! These are intended for professional restoration with new bushings prior to installation. That is why they are graded as "CORE GRADE". Very limited quantities, we offer core grade suspension parts for those car owners that wish to avoid reproduction parts.  Original Ford part number D1ZA-3355-A. Anghel Restorations...

$0 Price: $98.87

Buy Details

Availability: Out of Stock
Item #: 31975 -

Fits all 1967-70 Mercury Cougar and Ford Mustang with factory manual steering. Rarely did these last 60,000 miles. To find one after 50 plus years is quite a find! These are intended for professional restoration with new bushings prior to installation. That is why they are graded as "CORE GRADE". Very limited quantities, we offer core grade suspension parts for those car owners that wish to avoid reproduction parts. Typically this manual steering, idler arm would have had a pink...

$0 Price: $98.87

Buy Details

Availability: Out of Stock
Item #: 31976 -

Fits all 1967-70 Mercury Cougar and Ford Mustang with factory power steering. Rarely did these last 60,000 miles. To find one after 50 plus years is quite a find! These are intended for professional restoration with new bushings prior to installation. That is why they are graded as "CORE GRADE". Very limited quantities, we offer core grade suspension parts for those car owners that wish to avoid reproduction parts. Typically this manual steering, idler arm would have had a yellow paint mark on...