All Products

Dash color painted steel bezel that houses the courtesy lights on all 1969-70 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL ACCY. Sold pit free, often times we can select your desired color, but plan on detailing them if your undergoing a restoration.Replaces Ford part number C9WB-10964. During assembly of your switches, note that the pins need to be on top. Switches and wiring harnesses sold individually. ...

Dash color painted steel bezel that houses the courtesy switches with DEFOG on all 1970 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL DEFOG. May have some small pits, depending upon stock on hand. Plan on detailing them with your interior color for best results.Replaces Ford part number D0WB-10964-B. During assembly of your switches, note that the pins need to be on top. Switches and wiring harnesses sold individually. ...

Dash color painted steel bezel that houses the courtesy switches with convertible top on all 1970 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL TOP. May have some small pits, depending upon stock on hand. Plan on detailing them with your interior color for best results.Replaces Ford part number D0WB-10964-A. During assembly of your switches, note that the pins need to be on top. Switches and wiring harnesses sold individually. ...

Emergency flasher switch bezel for the side of fixed steering columns (non-tilt). For all years 1967 1968 1969. Paint to match your interior. There is a slight difference between the original bezel and these reproductions. Original bezels have taller "Emergency Flasher" lettering, plus they came color matched to the steering columns. Functional reproduction item. Ford part number C9OZ-15C580-A.

Emergency flasher switch bezel for the side of fixed steering columns (non-tilt). For all years 1967 1968 1969. Paint to match your interior. Compared to the reproduction version of this bezel, there is a difference. "Emergency Flasher" lettering is much heavier on the originals, plus they came color matched to the steering columns. We can often times supply your desired color, please include color needs in the comments section. Ford part number C9OZ-15C580-A.

Emergency flasher bezel for the side of the tilt steering column. Reproduction bezel in black. Replaces most all tilt swing steering columns from 1967-69. Replaces Ford part number C9AZ-15C80-A, and an earlier part number starting that was likely C7SZ-15C580-A.

Chromed plastic driver side fresh air "Vent" bezel. Mounts with the cable through a hole in the dash panel, just to the right of the vent register. Most all of these used bezels have a defect in the chrome plating along the bottom, not visible when installed.Replaces Ford part D1WA-18A405 (casting in the part), or D1WY-10852-B.*Note - Does not fit Mustang

Complete grade "A" bezel with perfect woodgrain and aluminum surround. The 1969 bezel is unique from 1970 in that 1970 had a curved cut-out for the larger diameter column. Notice the circular rings around the gauges are not discolored on this premium grade part.Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts! ...

Complete grade "A" bezel with perfect woodgrain and aluminum surround. The 1970 bezel is unique from 1969 in that 1969 had no curved cut-out for the larger diameter column. Notice the circular rings around the gauges are not discolored on this premium grade part. Check out the video below on our new gauge tester: ...

Complete grade "B" bezel will have faded woodgrain, dull aluminum surround and there will also be a few scratches or cracks. The 1969 bezel is unique from 1970 in that 1970 had a curved cut-out for the larger diameter column. Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts! ...

Complete grade "A" bezel with flawless woodgrain and aluminum surround. The 1969 bezel is unique from 1970 in that 1970 had a curved cut-out for the larger diameter column.Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts!

Complete grade "B" bezel with faded woodgrain, dull aluminum surround and a few scratches or cracks. The 1969 bezel is unique from 1970 in that 1970 had a curved cut-out for the larger diameter column.Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts! ...

Nice reproduction globe box door button bezel for all 1967-70 Mercury Cougar and Ford Mustangs. We do sell used to, see related.Replaces Ford part number C6OB-62060A12.

This trim ring that surrounds the glove box release button is often missing. Easily installs by snapping in place. Better fit than the reproductions out there.Replaces Ford part number C6OB-62060A12.

Best used bezel we can find from a Western parts car. "Almost" pit free. If you look close you will see some tiny specs. Click onto the image to enlarge the picture.Replaces Ford part number D3WB-13064, and D3WY-13064-B.

Restored driver (left hand) side headlight bezel moulding for any 1971-72 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the core charge...

Restored driver (left hand) side headlight bezel moulding for any 1973 Mercury Cougar. Chromed only, detail black painted portions not completed. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had...

Best used bezel we can find from a Western parts car "Almost" pit free. If you look close you will see some tiny specs. Click onto the image to enlarge the picture.

Best used bezel we can find from a Western parts car. "Almost" pit free. If you look close you will see some tiny specs. Click onto the image to enlarge the picture.Replaces Ford part number D3WB-13052 and D3WY-13064-A.

Restored passenger (right hand) side headlight bezel moulding for any 1971-72 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the core...

Restored passenger (right hand) side headlight bezel moulding for any 1973 Mercury Cougar.  Chromed only, detail black painted portions not completed. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored...

These B grade headlight doors will have some pitting in the chrome. Some of them will be nearly pit free, but may have a small crack. Click onto the image to enlarge the picture.

These B grade headlight doors will have some pitting in the chrome. Some of them will be nearly pit free, but may have a small crack. Click onto the image to enlarge the picture.Replaces Ford part number D3WB-13064, and D3WY-13064-B.

Driver side left hand headlight door. We have many good used head light doors in stock, give us a ring!

New Old Stock 1973 Mercury Cougar Driver side, headlight door.  Casting number reads D3WB-13064. Ford part number D3WY-13064-B

Driver side headlight door. If you happen to be missing this door (bezel) you are doing damage to your grille each time you open and close the covers (eyelids). This acts as more than just a finish piece, it adds rigidity to your grille which is made from a rather soft metal. This listing is for the driver side headlight door. The backside is marked TOP R.H. / L.H. and carries and Ford casting number of C7WB-13052 for the passenger side and C7WB-13064 for the driver side. The four Phillips...

These B grade headlight doors will have some pitting in the chrome. Some of them will be nearly pit free, but may have a small crack. Click onto the image to enlarge the picture.

These B grade headlight doors will have some pitting in the chrome. Some of them will be nearly pit free, but may have a small crack. Click onto the image to enlarge the picture.Replaces Ford part number D3WB-13052 and D3WY-13064-A.

Passenger side right hand headlight door. We have many good used head light doors in stock, give us a ring!Casting number reads D1WB-13052.Ford part number D1WY-13064-A

New Old Stock 1973 Mercury Cougar Passenger side, headlight door.  Casting number reads D3WB-13052. Ford part number D3WY-13064-A

Passenger side headlight door.If you happen to be missing this door (bezel) you are doing damage to your grille each time you open and close the covers (eyelids). This acts as more than just a finish piece, it adds rigidity to your grille which is made from a rather soft metal. This listing is for the passenger side headlight door. The backside is marked TOP R.H. / L.H. and carries and Ford casting number of C7WB-13052 for the passenger side and C7WB-13064 for the driver side. The four...

Quality reproduction to replace your pitted original. Replaces Ford Part #: C7ZZ-10852-A. Here is a helpful youtube video on how to go about removing a headlight switch from a Cougar or Mustang. 

Replaces Ford part #: C9ZZ-10852-A. Here is a helpful youtube video on how to go about removing a headlight switch from a Cougar or Mustang. 

Reproduction headlight switch bezel for any 1971-73 Mercury Cougar and Ford Mustang.  Replaces Ford part number D1ZB-11649-AC.

Used headlight switch bezel for any 1971-73 Mercury Cougar and Ford Mustang. Good used bezel with shiny chrome. May have one small nick in the chrome or one broken plastic stud on the reverse.Replaces Ford part number D1ZB-11649-AC.

Incorrect chrome finish (supposed to be satin not chrome) Mustang part that requires modification to make the metal XR7 insert fit. This is the only new alternative to your broken bezel, we sometimes get in an original that just needs paint. This unit will also fit the Cyclone, Montego, and many other Mercurys and Fords. Replaces Ford part # C8ZZ-3D572-A.

This is the correct horn panel bezel for all 1968 standard model Cougar steering wheels. The satin paint will need to be resprayed but the two mounting studs are in place and there are no cracks or burns. Please see related for XR7 model bezel. Ford part number C8AA-3D754-A.

Inexpensive upgrade, replaces that bezel damaged by improper screw driver removal. We also sell the special tool that removes this without hassle or damage

Used ignition lock cylinder bezel for any 1967-68 Mercury Cougar, ford Mustang and likely Fairlane / Comet. Good used condition, we recycle the pitted crusty ones. Half the price of the repop version. We also sell the special tool that removes this without hassle or damage.Replaces Ford part number C6OZ-11584-A.

Used ignition switch bezel for any 1969 Mercury Cougar, 1969 Ford Mustang and many other 1969 Ford and Mercury cars with the ignition switches on the dash panel. Good used part, little or no imperfections in the chrome, good value compared to the reproduction. Replaces Ford part #: C9AZ-11584-A.

Not faded, no scratches, show quality. Notice this 1970 part has the cut out for the larger diameter steering column.

No cracks or deterioration from UV rays.

License to rear bumper spacer used on all 1973 Cougars. Usually this item is badly cracked or missing. This is a show quality used part for those that are concerned about less than obvious detail items.NOTE: The difference between the 71-72 version and this 73 version is that the 73 did not have a casting number and the earlier year versions did.

This die cast bezel with a brushed finish was used from 1969 to the first part of 1970. This is a clean example with no pits or obvious scratches. The engineering number found on the back is C8AB-14505-B.

Poor condition with scratches and pitting as shown. This die cast bezel with a brushed finish was used from 1969 to the first part of 1970. The engineering number found on the back is C8AB-14505-B.

Good used bezel with no obvious scratches or pits. This bezel was used on the passenger door and both sides of the back seat in 1969 and on some earlier 1970 Cougars. The Ford engineering number found on the back is C8AB-14507-B.

Used grade "A" bezel used on the passenger side door and both rear seat switches. Looks similar to the 1970 bezel but is held in place with very hard to find clips not speed nuts. No pits or obvious scratches, Ford engineering number as seen from the back is C9AB-14A432-DFord part # is C9AZ-14528-A

Used grade A power window switch bezel for the Mercury Cougar. This bezel is used with all power window switches, except for the driver side door, and was only used on the 1973 model. Ford engineering # D3MB-14528-DA.