Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 4657-4704 of 13397
$0 Price: $189.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18735 -

Good used grade A horn bar with nice, almost perfect chrome. Will have all three vinyl pads / inserts in place but we cannot guarantee we will have your desired color. Replaces Ford part number C7WA-3D755-A. Check out this video

$0 Price: $75.47

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24088 -

Good used grade B horn bar with minimal pitting similar to what is shown in our pictures. Good for a driver quality classic or send it in for re-chrome for your show car. Will have all three vinyl pads / inserts in place but we cannot guarantee we will have your desired color. Please mention in the comments section what color you desire. Ford part number C7WA-3D755-A. Check out this video ...

$0 Price: $145.89

Buy Details

Availability: In-Stock Item
Item #: 12229 -

This restored part will require that you glue your colored vinyl strips in place. If you send in a core, only cores with light pitting can be used to create a show quality finish product. Casting number as seen on back: C7WA-3D755-A. Check out this video

$0 Price: $14.27

Buy Details

Availability: In-Stock Item
Item #: 32914 -

Set of three plastic spacers to replace your original brittle cracked parts. These are much stronger than OEM.

$0 Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19076 -

This listing is for one spring, plastic spacer and screw. Three of these are needed to mount your chrome three spoke horn bezel to your 1967 steering wheel. We also list reproduction 3D printed spacers. Check out this video

$0 Price: $164.85

Buy Details

Availability: In-Stock Item
Item #: 27183 -

Most of our grade A pads (other than black) will show some degree of fading. If you plan on repainting let us know and instead of replacing the reproduction emblem and beauty ring we will leave them off the pad for you to install after painting. Used grade "A" horn center / pad in aqua for the Mercury Cougar. Keep in mind that Aqua and Light Blue are very similar in color, once Aqua starts to fade, it becomes Light Blue. This is the best used example of a 1967 horn center / pad. Rarely do...

$0 Price: $164.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27180 -

Most of our grade A pads (other than black) will show some degree of fading. If you plan on repainting let us know and instead of replacing the reproduction emblem and beauty ring we will leave them off the pad for you to install after painting. Used grade "A" horn center / pad in black for the Mercury Cougar. This is the best used example of a 1967 horn center / pad. Rarely do we have more than one center as nice as this one in stock, so we'll do what we can to get a good pad for you. This...

$0 Price: $34.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19026 -

Good used grade B pad with dull trim ring and bad center emblem. Emblem will show discoloration, warping, cracks in the lens and maybe all three! Please let us know in the comments section when you make your online order what color you desire. Also keep in mind reproduction Mustang emblems are available and you can easily remove the COUGAR emblem and replace it with a Mustang emblem Check out this video ...

$0 Price: $164.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27184 -

Most of our grade A pads (other than black) will show some degree of fading. If you plan on repainting let us know and instead of replacing the reproduction emblem and beauty ring we will leave them off the pad for you to install after painting. Used grade "A" horn center / pad in light blue fro the Mercury Cougar. Keep in mind that Light Blue and Aqua are very similar in color, once Aqua starts to fade, it becomes Light Blue. This is the best used example of a 1967 horn center /...

$0 Price: $164.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27181 -

Most of our grade A pads (other than black) will show some degree of fading. If you plan on repainting let us know and instead of replacing the reproduction emblem and beauty ring we will leave them off the pad for you to install after painting. Used grade "A" horn center / pad in light ivy gold / light green for the Mercury Cougar. This is the best used example of a 1967 horn center / pad. Rarely do we have more than one center as nice as this one in stock but we'll do what we can to get you...

$0 Price: $164.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27182 -

Most of our grade A pads (other than black) will show some degree of fading. If you plan on repainting let us know and instead of replacing the reproduction emblem and beauty ring we will leave them off the pad for you to install after painting. Used grade "A" horn center / pad in parchment / off-white for the Mercury Cougar. This is the best used example of a 1967 horn center / pad. Rarely do we have more than one center as nice as this one in stock but we'll do what we can to get you a good...

$0 Price: $164.85

Buy Details

Availability: Out of Stock
Item #: 27190 -

Most of our grade A pads (other than black) will show some degree of fading. If you plan on repainting let us know and instead of replacing the reproduction emblem and beauty ring we will leave them off the pad for you to install after painting. Used grade "A" horn center / pad in red for the Mercury Cougar. Rarely do we have more than one center as nice as this one in stock but we'll do what we can to get you a good pad. This unit includes a reproduction center emblem and reproduction outer...

$0 Price: $164.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27178 -

Most of our grade A pads (other than black) will show some degree of fading. If you plan on repainting let us know and instead of replacing the reproduction emblem and beauty ring we will leave them off the pad for you to install after painting. Used grade "A" horn center / pad in saddle for the Mercury cougar. This is the best used example of a 1967 horn center / pad. Rarely do we have more than one center as nice as this one in stock but we'll do what we can to get you a good pad. This unit...

$0 Price: $3.25

Buy Details

Availability: In-Stock Item
Item #: 41435 -

Used on two spoke steering wheels. Replaces Ford Part # C0DZ-13807-A. Although it does not "look" right it will function correctly. Those in the know will purchase our good used spring.

$0 Price: $43.65

Buy Details

Availability: In-Stock Item
Item #: 32359 -

Wire extension for horn relocation, when the drag pak or drag pack option was ordered typically with 3.91 or 4.30 rear axle ratio. Fits all 1969-70 Mercury Cougar or Ford Mustang with factory oil coolers. Should also fit Torino and Cyclone. Reproduction of Ford part number C9DB-13A840-A.

$0 Price: $33.17

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19285 -

Decent used horn ring but unlike our grade "A" used horn ring this one will have very minor pitting but no open blisters in finish. Good value for your driver quality 68-69 Ford / Mercury with two spoke steering wheel.

$0 Price: $78.25

Buy Details

Availability: In-Stock Item
Item #: 15309 -

Reproduction Two Spoke Steering Wheel Horn Ring for the 1968 and 1969 Mercury Cougar. This is a very good reproduction piece. The original horn contact pieces fit nicely. This casting, while different than the 1968 version with the empty cavities is actually stronger. *NOTE* Save your old horn ring, you will need to transfer the rubber spacer and the horn contacts to this reproduction part.*CUSTOMER REVIEW* Called WCCC the other day after calling around to a lot of garages and auto parts...

MSRP:$149.85
$149.85 Price: $127.35

Buy Details

Availability: In-Stock Item
Item #: 10319 -

If you have already begun to install or have installed this item, it is not eligible for return or refund. This rim blow horn switch is made in the United States by Daniel Carpenter Mustang and is made from vinyl like original. When installing, make sure to massage the rim blow switch in place with counter clockwise, compacting strokes. Clockwise strokes (thumb motions) will stretch the switch and when you complete the installation you will find the part has become too long to fit in place...

$0 Price: $142.85

Buy Details

Availability: Out of Stock
Item #: 27375 -

Tested and working used pair of Hi and Lo tone horns. 1969-70 Mercury Cougar and Ford Mustang used part number C9ZF-13802-C and C9ZF-13801-B. Every horn is bench tested and inspected for cosmetic defects, if they do not function properly, and pass a visual inspection, they get recycled. The used horns at WCCC can be used as-is or you can clean and detail them for your show car.

$0 Price: $28.75

Buy Details

Availability: Out of Stock
Item #: 13767 -

Aluminum flexible tube that connects the vapor canister to the air cleaner. To give this the look of the originals that had a black paper exterior coating you can spray paint it flat black. If anyone knows of a source to buy the original paper coated foil tubes we would like to hear from you. Fits 1970 California Delivered Cars and all 1971 - 1973 Cars. Look for Buck Tag EV or EM. Preheat/Emission Control Duct.3ft long 7/8" O.D. 3/4" I.D. Replaces Ford Part #: D1UZ-9d667-A, D4HZ-9d667-A...

$0 Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 19996 -

Black paper wrapped aluminum flexible tube that connects the vapor canister to the air cleaner. This is as close to concours as we can find, 3/4 inch diameter, 36 inches long, and black outside, brown paper color inside.  Fits 1970 California Delivered Cars and all 1971 - 1973 Cars. Look for Buck Tag EV or EM. Preheat/Emission Control Duct. Replaces Ford Part #: D1UZ-9d667-A, D4HZ-9d667-A or D0AZ-9D667-A

$0 Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23898 -

All 1967 289 Cougars with California emissions. Hose that connects from the air inlet assemble to the air pump. Molded hose, thicker in diameter than the other connecting rubber hoses. Inside diameter is about 1 inch. Kind of shaped like a "J". Fits C and A code 289 engines, 1967 Mercury Cougar and 1966-67 Ford Mustang and others. Hose only, no wire spring clamps, included. Ford part number C6OE-9B458-B.

$0 Price: $81.85

Buy Details

Availability: Rare / NOS Part
Item #: 32844 -

New old stock, special molded California emissions rubber hose. Connects to the anti backfire valve, not sure where the other end attaches. About 12 inches long. Fits 1967 Mercury Cougar and Comet, and Ford Mustang and Fairlane, all with 390 thermactor smog.Ford part number C7OZ-9H534-B.

$0 Price: $25.15

Buy Details

Availability: Out of Stock
Item #: 13627 -

Reproduction Autolite gas tank to filler pipe hose fits the 67 to 70 Mercury Cougar, measures 4 1/2" long. Excludes 1970 with California emissions. Even if yours is not cracked it will be hard if it is over two decades old. We highly suggest you replace this part if yours is in fact hardened with age because a minor rear end collision could cause it to fail and send fuel spilling into your trunk area. Replaces Ford part #: C8ZA-9047-A. ...

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26659 -

This Gas Tank To Filler Pipe Hose reproduction fits the 67, 68, 69, and 70 Mercury Cougar. Excludes 1970 with California emissions. Even if yours is not cracked it will be hard if it is over two decades old. We highly suggest you replace this part if yours is in fact hardened with age because a minor rear end collision could cause it to fail and send fuel spilling into your trunk area. Replaces Ford part #: C8ZA-9047-A.

$0 Price: $40.91

Buy Details

Availability: In-Stock Item
Item #: 41779 -

Both ends have 90 degree molded ends. Attaches heater core to water heater control valve.Replaces Ford Part #: C7ZZ-18472-CVAC.

$52.16 Price: $94.85

Buy Details

Availability: In-Stock Item
Item #: 13721 -

High pressure hose from the insulator to the control valve. All correct ribbing, striping, and crimping. Has correct colored protective sheathing.  This hose is factory correct for the 1967-68 390, 427 and 428 & 1969-70 302, 351, 390 and 428. This hose can also be used to reroute the 1967-68 289 and 302 to the big block routing when paired with the other 3 hoses needed (C9OZ-3A319-A, C8ZZ-3A713-A, C7AZ-3A005-A) and the 69-70 power steering hose bracket (C7ZZ-3C510-A and...

$0 Price: $45.95

Buy Details

Availability: In-Stock Item
Item #: 14075 -

New power steering pressure hose for late 1972 and all of 1973 Mercury Cougar and Ford Mustang with 351 engines. This was a re-engineered hose to eliminate that 1971-72 extra long hose that doubles back on itself. Has brass fitting for attaching the pump end steel tube fitting, you need to save that steel tube. Made in the U.S.A. Replaces Ford Part # D1ZZ-3A719-A Click this link for more clarity on power steering hoses: https://secure.cougarpartscata... ...

$0 Price: $45.80

Buy Details

Availability: In-Stock Item
Item #: 53273 -

NOTE: Some customers have mentioned this hose does not fit well, others have said it fits with no issues. It is not the same as OEM and fitment seems to depend on the vehicle and modifications that have been previously done. We recommend going with our premium version. Lower pressure hose for any 1967-70 Mercury Cougar and Ford Mustang, but with a V-8. The factory power steering pressure hose originally was a two piece hose. Valve end has the 5/16" flared male fitting, and a 3/8" female...

$50.00 Price: $57.47

Buy Details

Availability: In-Stock Item
Item #: 42029 -

This Pump to Value Outlet Pressure Hose is 100% correct for the 1967, 1968, 1969, 1970 big block. This hose has industrial high pressure fittings that are much higher quality than those available by most Mustang / Cougar Parts Dealers. Replaces Ford Part #: C9OZ-3A319-C. Click this link for more clarity on power steering hoses: https://secure.cougarpartscata... ...

MSRP:$50.00
$50.00 Price: $45.38

Buy Details

Availability: In-Stock Item
Item #: 42030 -

This Pump to Value Outlet Pressure Hose is 100% correct for the 1970 small block. This is the upper portion that connects to the one year only 1970 pump found on the 351c, 351w and BOSS 302 equipped cars. Like the originals, this is part one of a two part hose. This hose has industrial high pressure fittings that are much higher quality than those available by most Cougar / Mustang parts dealers. Replaces Ford Part #: D0OZ-3A319-A. Click this link for more clarity on power steering hoses:...

$0 Price: $22.75

Buy Details

Availability: In-Stock Item
Item #: 31588 -

Reproduction hose that connects the oil cap to the air cleaner on cars equipped with the 289 engine. Replaces Ford Part number C6AZ-6A664-P

$0 Price: $17.35

Buy Details

Availability: In-Stock Item
Item #: 41427 -

Reproduction PCV Hose with Ford Logo for the 1969 Mercury Cougar or Ford Mustang with 351 engines. Fits from the PCV valve in the valve covers to the factory Ford carburetor spacer plate.  Approximately 3/8" inside diameter but it will stretch to fit over a 1/2" PCV valve fitting.  Keep in mind that it will stretch easier if warmed.

$0 Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25549 -

D3-6A664-2V Original used hose that connects the oil cap mounted PCV valve and the metal hard line on 1973Mercury Cougar and Ford Mustang H-code 351-2V engines only. Used hoses will have faded Motorcraft markings (if present). Very often the rubber will be hard and showing some degree of stress cracks. *Note - Excludes all 1969-72 351, and 1973 351-4V engines. *Note - These molded and contoured hoses were designed to work with original style PCV valve (modern 90° PCV valves won't...

$0 Price: $19.15

Buy Details

Availability: In-Stock Item
Item #: 41911 -

Concours for 1970 351C-2V and 351C-4V with correct ink stamped Ford script, 17 1/2" long including the 90 degree bend. Connects PCV valve to carburetor spacer plate. Other parts houses list this as a 71-73 but the 71-72 is 25" long (so it can reach to the front of the driver side valve cover) on both the 2V and 4v 351 Cleveland and this hose will not reach. This will work for the 1973 Q-code 351C-4V as the 73 mates to a metal tube and is only 11".This hose was originally installed from the...

$0 Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24435 -

C8OZ-6A664-A Original used hose that connects the original PCV valve to the carburetor spacer plate. All 1968 X code 390-2V engines. Used hoses will have faded striping (if present), and clamp impressions. Very often the rubber will be hard and showing some degree of stress cracks. *Note - These molded and contoured hoses were designed to work with an original style PCV valve (modern 90° PCV valves won't work). Additionally anything other than period original intake manifolds, valve...