Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 8161-8208 of 13416
Price: $32.85

Buy Details

Availability: Out of Stock
Item #: 33243 -

New Old Stock passenger side eat back release knob for 1971-73 Mercury Cougar and Ford Mustang with outboard mounted seat back releases. Also fits 1971 and newer Mercury Comet and Ford Maverick with bucket seats, as well as 1971 and newer Pinto.Ford part number D1FZ-6262622-A. *Note - Not to be confused with the center mounted release knobs.

Price: $34.15

Buy Details

Availability: In-Stock Item
Item #: 10583 -

Very nice reproduction knobs for 1971-73 Mercury Cougar and Ford Mustang with outboard mounted seat back releases. Also fits 1971 and newer Mercury Comet and Ford Maverick with bucket seats, as well as 1971 and newer Pinto. *Note - Not to be confused with the center mounted release knobs.

Price: $22.75

Buy Details

Availability: In-Stock Item
Item #: 14054 -

Pressure die cast with show quality chrome. Easy to install, correct fit and finish, inexpensive way to spruce up your interior. Remember when we used to send these out and pay big money to have them replated? Sold as a pair, hardware included.

Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10820 -

Passenger side seat back release assembly, can me used for a conversion of 1970 high-backed seat backs for use in 1969 Mercury Cougar Eliminator and Ford Mustang Mach 1. This assembly has the release lever mounted nearly at shoulder level, factory 1970 high backs have the latch release at the hinge. This is a sneaky way to 'create' the factory 1969 high backed seats from 1970 seat backs. Comes with all hardware as shown. See picture for locating the three holes required for installation in a...

Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31640 -

Used seat back stop for the 71 - 73 Cougar or Mustang. Right is same as left.  Sold individually, two per car.

Price: $32.75

Buy Details

Availability: In-Stock Item
Item #: 10584 -

Very nice reproduction knobs for 1971 Mercury Cougar and Ford Mustang with center mounted seat back releases. Also fits 1971 Mercury Comet and Ford Maverick with bucket seats, as well as 1971 Pinto. *Note - Not to be confused with the outboard mounted release knobs.

Price: $495.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31698 -

Used convertible rear seat structure cut from a 69 - 70 Cougar Convertible parts car. This will not fit a Mustang due to the differences in the wheel houses and transition panel. Keep in mind that this is an oversized item and cannot ship through any conventional means. Truck freight and crating fees will apply. 

Price: $74.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31778 -

Reproduction pair of upholstered seat back panels for the 67 standard / decor level interior. If you have torn or broken seat backs, and you're looking for quality replacements to match your interior, these seat backs are the best choice. Made from the same vinyl as our upholstery sets and color matched to each interior color option.  Follow this link to find the attaching clips.

Price: $23.99

Buy Details

Availability: In-Stock Item
Item #: 41830 -

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors. Please note: this is the only aftermarket shade of Aqua, which was only used on the Ford Mustang. Contact us for availibility of good used Cougar correct aqua seat belts.Sold individually

Price: $45.75

Buy Details

Availability: In-Stock Item
Item #: 13711 -

These are era-correct looking seat belts at an affordable price.  These are not Concours reproductions, but have the correct vintage look used by Ford on multiple cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals.Sold individually Includes: 1 Complete non-retracting seat belt (includes both male and female side)2 Bolts, nuts, and lock washers

Price: $25.45

Buy Details

Availability: In-Stock Item
Item #: 41828 -

Great looking replacement style seat belt. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors. These are great lap belts for convertible cars that don't use retractors. We suggest using seat belt anchor bolts for an easy installation of these aftermarket lap seat belts. This kit does come with installation hardware, but the threads on the bolt are coarse, and will not bolt into your original threaded anchor points. sold individually ...

Price: $41.18

Buy Details

Availability: In-Stock Item
Item #: 13708 -

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!sold individually

Price: $47.27

Buy Details

Availability: In-Stock Item
Item #: 41827 -

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors.Sold individually.

Price: $41.18

Buy Details

Availability: In-Stock Item
Item #: 13714 -

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!sold individually

Price: $45.75

Buy Details

Availability: In-Stock Item
Item #: 13706 -

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!sold individually

Price: $38.25

Buy Details

Availability: In-Stock Item
Item #: 32360 -

Finally! A cure for those peeling chrome bezels on your car with deluxe seat belts. If your plastic bezels on your 68-72 standard belts are two part construction, you can upgrade with these attractive bezels. Before these were reproduced we used to hunt high and low for good used units from rear belts out of parts cars. Perfect fit and great quality. Sold as a pair, six per car on coupes, four per car required on convertibles. Replaces Ford part # C8AZ-65611A72-A

Price: $70.65

Buy Details

Availability: In-Stock Item
Item #: 30898 -

Now you can restore your 1968-72 Cougar or Mustang’s deluxe seat belt buckles back to their original showroom condition by replacing cracked, broken, or missing components with the new seat belt buckle restoration kit. Tooled to the original factory specifications from OEM quality injected molded black plastic. This seat belt buckle kit features the correct texture grain pattern and starburst medallions for a perfect restoration. The release button and spring are included. One kit does a pair...

Price: $45.75

Buy Details

Availability: In-Stock Item
Item #: 13715 -

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!Sold individually

Price: $45.73

Buy Details

Availability: In-Stock Item
Item #: 13709 -

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!Sold individually

Price: $45.75

Buy Details

Availability: In-Stock Item
Item #: 13710 -

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!sold individually

Price: $93.35

Buy Details

Availability: In-Stock Item
Item #: 31000 -

Premium quality deluxe rear lap belt. Deluxe belts with chrome bezels were equipped on many 68 - 69 Cougars and Mustangs. If you prefer the standard version with a black band on the buckle, just mention it and we will change it out at no extra cost. Many of our customers are calling this a "concours" set, but they do not qualify for that. If you look close you will see the nylon webbing has four bands which is correct for 1968. 1969 and up used a three band pattern on the webbing. Notice it...

Price: $429.89

Buy Details

Availability: Out of Stock
Item #: 14-0058 -

This listing is for a complete set of Deluxe safety belts removed from a 1967 Cougar, minus hardware. The set consists of two front retractors (they are not side specific) that measure 22" fully extended tip to tip, and four lap belts. The two male rear belts measure 20" and mount next to the rear interior panels and the female buckle side measures 36" fully extended. Both male and female belts for the rear can be identified by the plastic sheath at the base. This plastic was installed to help...

Price: $45.75

Buy Details

Availability: In-Stock Item
Item #: 13712 -

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included! sold individually

Price: $64.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-0063 -

Hard to find without being faded, frayed or rusted buckle. Rarely, if ever will our used shoulder belts look this pristine as they are prone to sun fade. Sold individually, 2 required per car, hardware sold separate. Contact us for colors other than black. Check out our video "All about seat belts" below. ...

Price: $64.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1016 -

Hard to find without being faded, frayed or rusted buckle. Rarely, if ever will our used shoulder belts look this pristine as they are prone to sun fade. Sold individually, 2 required per car, hardware sold separate. Contact us for colors other than black. Check out our video "All about seat belts" below. ...

Price: $45.73

Buy Details

Availability: In-Stock Item
Item #: 13707 -

This is an original looking seat belt at an affordable price. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included! SOLD INDIVIDUALLY

Price: $13.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32041 -

Used seat belt anchor plate that has been cut out from a car in our salvage yard. Must be welded to floor pan. 6 total per car, 2 inboard in the transmission tunnel, and 4 on the rear seat pans. The front outboard anchors are part of the rocker rails. Rectangular shaped like the 1967-73 cars. We have noticed that the last generation 1971-73 Cougars had 4 round shaped plates in the rear floors. Same threads, all work the same. These were pretty much used on all Ford cars starting in...

Price: $13.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32042 -

Used seat belt anchor plate that has been cut out from a car in our salvage yard. Must be welded to floor pan. 4 total per car, all 4 on the rear seat pans. The front outboard anchors are part of the rocker rails. Rectangular shaped for the front seat belts inboard on 1971-73 cars. Round anchor bracket with factory welded nut for added strength. See related items for good used seat belt anchor plates if you have concours needs. Replaces Ford Part # D1AZ-6561216-A. ...

Price: $5.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-0003 -

Good used original seat belt bolt. There were a few different variations of this bolt, some were stamped with a B and others had no stamping at all. 13/16" hex head, 1-1/2 inch bolt with a 3/16 inch shoulder. 

Price: $37.85

Buy Details

Availability: In-Stock Item
Item #: 30177 -

Complete set of front seat belt bolts for your 67 - 68 Cougar or Mustang. Included are the 4 bolts, 4 large washers, 2 spacers and 4 rubber anti-rattle gaskets. Get the rear set here.

Price: $26.82

Buy Details

Availability: In-Stock Item
Item #: 30179 -

Reproduction set of front seat belt bolts for your 69 - 70 Cougar or Mustang. Included are the 4 bolts, 4 large washers and 4 anti rattle gaskets.

Price: $28.65

Buy Details

Availability: In-Stock Item
Item #: 30180 -

Complete set of rear seat belt bolts for your 67 - 68 Cougar or Mustang. Included are the 4 bolts and 4 spacers. Get the front set here.

Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-0110 -

Used seat belt buckle bezel for the Mercury Cougar, Ford Mustang, or Ford Torino. This is the outer portion of the two piece seat belt buckle cover. This is a good replacement part if you want to keep your car original. These bezels will be free of cracks and breaks. Please specify which color you're looking for when ordering. Keep in mind that there are only a handful of colored buckles available, so we'll do our best to get you the color you need. Check out our video "All about seat belts"...

Price: $16.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1014 -

This is the plastic center piece you press down to release your seat belt on the 68 - 72 seat belts. It comes unbroken and without cracks. This button piece has original starburst decal, which will be faded and need replacing. Find the replacement decals here. Spring is included.

Price: $22.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32182 -

This dual male bracket is designed to hold your lap belt buckles when not in use. The Engineering number as seen on the bottom side reads C9ZB-65045A36AW.

Price: $186.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 10212 -

Are you looking to replace or upgrade your complicated 1968-73 3 Point Seat Belts with a modern easy to use factory looking Belt?  These 3 Point Seat Belts will bolt onto any 1968-73 Coupe using your existing mounting hardware. . The belt buckles are very similar to the original starburst buckles Ford used in the Late 1960's