Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 9409-9456 of 13397
$0 Price: $28.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10894 -

Used upper support bracket for the hood latch on any 1969 Mercury Cougar. Ford part number C9WY-16707-A.

$0 Price: $28.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11620 -

Used upper support bracket for the hood latch on any 1970 Mercury Cougar. This 1970 part will work on a 1969. The only difference is the top corner is clipped at an angle on the 1970.Ford part number D0WY-16707-A.

$0 Price: $11.88

Buy Details

Availability: In-Stock Item
Item #: 11-0398 -

This support bracket mounts to the lowest portion of the quarter window cavity. This bracket is installed before the lower guide bracket. Fits all 1971-73 Mercury Cougar models and 1971-73 Ford Mustang models including fastback or sport roof models. The exploded view of the quarter window parts can be found in the Osborn Body Assembly Manual for 1971-72. One for each quarter window

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31907 -

This often times missing bracket was attached to the back of your 67 - 68 XR7 model passenger side plastic bezel via plastic studs that easily break off from over tightening the screw. This is the more common design. Two different sized brackets used, this is the larger one that is 1-3/4 inches wide. The bracket that goes in the corner above the switch panel is 3/32" less. It was obvious what the original intent was on this design in that a tab on the L bracket was supposed to extend...

$0 Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32927 -

This often times missing bracket was attached to the back of your 67 - 68 XR7 model passenger side plastic bezel via plastic studs that easily break off from over tightening the screw. This is the smaller design. Two different sized brackets used, this is the smaller one that is 1-21/32 inches wide. This bracket goes in the corner above the switch panel. The larger bracket is 1-3/4" or 3/32" wider. It was obvious what the original intent was on this design in that a tab on the L...

$0 Price: $8.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31906 -

This often times missing bracket was attached to the back of your early 1967 Standard model passenger side plastic bezel via plastic studs that easily break off from over tightening the screw. This is the less common design.It was obvious what the original intent was on this design in that a tab on the L bracket was supposed to extend into the rectangular hole to keep the bracket properly anchored to the fragile plastic. For some reason the majority of the cars built didn't get the better...

$0 Price: $39.85

Buy Details

Availability: In-Stock Item
Item #: 32010 -

Reproduction set of 5 passenger side dash bezel clips. This often missing bracket was attached to the back of your 67 - 68 Standard model passenger side plastic bezel via plastic studs that easily break off from over tightening the screw. This is the more common design of the two and by far the superior. Replaces item # 31908Through 67-68, there were four different style brackets, you can see all four by following this link.Check out our dash bezel repair video: ...

$0 Price: $16.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31908 -

This often times missing bracket was attached to the back of your 67 - 68 Standard model passenger side plastic bezel via plastic studs that easily break off from over tightening the screw. This is the more common design.Through 67-68, there were four different style brackets, you can see all four by following this link. ...

$0 Price: $39.85

Buy Details

Availability: In-Stock Item
Item #: 32009 -

Reproduction set of 5 XR7 passenger side dash bezel clips. This often missing bracket was attached to the back of your 67 - 68 XR7 model passenger side plastic bezel via plastic studs that easily break off from over tightening the screw. Our improved design is better than the original in that the tab extends into the rectangular recess in the dash bezel which anchors in MUCH more securely.  Replaces item # 31907 Through 67-68, there were four different style brackets, you can see all four...

$0 Price: $23.85

Buy Details

Availability: Out of Stock
Item #: 10283 -

Radio support bracket for 1967-68 Mercury Cougar and Ford Mustangs without consoles. Used on AM, AM/FM, and AM/8Track factory radios.Replaces parts #s C7ZA-18888-A & C8ZA-18888-A, as found in the electrical assembly manuals.

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10284 -

Rear radio support bracket for all 1972-73 Mercury Cougar and Ford Mustangs with factory AM/FM stereos. *NOTE*1972-73 Mercury Cougar and Ford Mustang with AM or AM/8 Track radios used the C9AZ-18888-A bracket for installation.Replaces part # D2ZA-18888-AB

$0 Price: $18.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33444 -

Used lateral or side bracket for mounting the steering column to the instrument panel on any 1970-71 Mercury Cougar or Ford Mustang. Support bracket only, there is also a large support bracket that is also needed. Tilt and fixed steering columns.Bracket also used on 1970 full sized Ford and Mercury cars, and 1970-71 Ford Maverick.  Ford part number D0ZZ-3B139-A.

$0 Price: $24.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33445 -

Used lateral or side bracket for mounting the steering column to the instrument panel on any 1972-73 Mercury Cougar or Ford Mustang. Hooped support bracket only, there is also a large main bracket that is also needed. Tilt and fixed steering columns. Bracket also used on 1971 full sized Ford and Mercury cars.  Ford part number D1AZ-3B139-A.

$0 Price: $32.75

Buy Details

Availability: In-Stock Item
Item #: 25897 -

Sold as a pair. Replaces Ford Part # : D0OZ-8052 Check out our video on Radiator and Fan upgrades below:

$0 Price: $43.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 58537 -

Used pair of lower radiator brackets as taken from any 1971-73 Mercury Cougar or Ford Mustang. Additionally these will also fit 1970-71 Ford Torino / Fairlane and 1970-71 Mercury Montego / Cyclone. Should be for all engines. 250 6 cylinder, 302, 351, and 429. Right and left are different, plan on purchasing the insulating rubbers, they may not always be included. Ford part numbers D0OB-8052 or D0OZ-8052-A for passenger side, D0OB-8B381 or D0OZ-8052-B for the driver side. Check out our video on...

$0 Price: $1.55

Buy Details

Availability: In-Stock Item
Item #: 26530 -

Fills the hole in the core support where the A/C lines pass through to the condenser. Replaces part # C9ZZ-19819.

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 30515 -

Pair of reproduction cowl vent panel support pads. These pads help prevent the upper cowl cover from flexing. 

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24142 -

This is the Left hand or driver side spring that holds the rear license plate or fuel door in the upright position. Fits all years of Cougar and 1966-71 Torino and Fairlane models except Station wagon and RancheroFord Part #: C7WY-13455-B

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24141 -

This is the right hand or passenger side spring that holds the rear license plate or fuel door in the upright position. Fits 1967-68 and 1971-73 Cougar and 1966-71 Torino and Fairlane models except Station wagon and RancheroFord Part #: C7WY-13455-A

$0 Price: $17.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32695 -

This is the spring that holds the rear license plate or fuel door in the upright position. Fits 1969-70 Cougar.Ford Part #: C9WY-13455-A

$0 Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19453 -

Good aluminum piece that has no corrosion, no dings and all six mounting studs will be firmly in place. This same bezel was used on all Standard, XR7 or Eliminator Cougars for 1969 and 1970. Obviously the clock hole was not utilized on the Standard Cougar.

$0 Price: FREE

Buy Details

Availability: Download
Item #: 33850 -

Here is our free 7MB download for the 1967 - 1972 Mercury Cougar suspension diagram.

$0 Price: $34.97

Buy Details

Availability: In-Stock Item
Item #: 61616 -

Reproduction sway bar clamp and bushing set for 3/4" sway bars on 1967 - 1973 Cougars and Mustangs.  These polyurethane bushings reduce deflection at the bar mounts to quicken the action of stock or aftermarket sway bars, and come with matching mount brackets. Includes lubrication groove to prevent squeaking. Replaces Ford Part #: C5ZZ-5486-H

$0 Price: $257.95

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 10023 -

DOES NOT FIT BIG BLOCK Reproduction 1 1/8" sway bar for 1967 - 1970 Cougars and Mustangs. End link and bushing kit is included.

$0 Price: $222.17

Buy Details

Availability: Out of Stock
Item #: 10024 -

Reproduction big block 1" sway bar for 1967 - 1970 Cougars and Mustangs. Keep in mind that this sway bar does not come with mounting brackets or the end link kit.  

$0 Price: $171.86

Buy Details

Availability: Out of Stock
Item #: 24846 -

C9ZZ-5482-D Factory used sway bar for any 1969 Cougar with optional Competition Handling Package. Factory identified with a single 'Green' paint stripe. *Excludes 428CJ and Boss 302 cars, those cars were factory built with a 15/16 inch sway bar. This factory used front sway bar, does not include any mounting brackets or end link kits.

$0 Price: $199.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24273 -

C7ZZ-5482-C This is a factory used sway bar for the Special Handling Package as found on with the 1967 and 1968 GT option. This bar was factory identified with a single 'Green' paint stripe. This factory used front sway bar, does not include any mounting brackets or end link kits.

$0 Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24180 -

Used front sway bar, does not include any mounting brackets or end link kits. Ford part # C7WY-5482-A.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25433 -

D1ZZ-5482-A Very briefly at the beginning of the 1972 model year 9/1/1971 - 10/11/1971. Specifically marked from the factory with 1 Violet and 2 Yellow paint stripes. This factory used front sway bar, does not include any mounting brackets or end link kits.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25218 -

D0ZZ-5482-B Factory used front sway bar found on most 1970 Cougars. 3/4 inch in diameter. This factory used front sway bar, does not include mounting anybrackets or end link kits.

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24844 -

C9ZZ-5482-A 1969 Standard used factory front sway bar. 3/4 inch in diameter. This factory used front sway bar, does not include any mounting brackets or end link kits.

$0 Price: $266.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25364 -

For any 1971, 1972, 1973 Mercury Cougar. The 1/2" sway bar for Competition Handling was optional on any 1971-73 Cougar, but it was included automatically on all 1971 GT's, 429 Cobra Jets, and with the 1972 & 1973 Q code engine option (351CJ). Concours restorers, should be painted all chassis black with 1 White stripe. This factory used 1/2" rear sway bar, does not include any mounting brackets or end link kits. Replaces Ford part number D1WY-5A772-A.Here's our little film to help you...

$0 Price: $36.45-$43.64

Buy Details

Availability: In-Stock Item
Item #: Black_Hooded_Pullover -

Now in black with no zipper, our comfy WCCC hoodie features bold new walking cat graphics on front and back. Perfect for staying warm in the garage, or out and about with your Cougar! This sweatshirt is made with soft, mid weight fleece and generous fit for comfort. Features a jersey lined hood, heavy gauge drawcord with metal eyelets and 1x1 ribbing at cuffs and waistband. 8.5 oz fleece80% cotton 20% polyester blend100% cotton 20 singles face yarnSplit stitch double needle sewing on all...

$0 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: Gray_Hooded_Pullover -

Now in grey with no zipper, our comfy WCCC hoodie features bold new walking cat graphics on front and back. Perfect for staying warm in the garage, or out and about with your Cougar! This sweatshirt is made with soft, mid weight fleece and generous fit for comfort. Features a jersey lined hood, heavy gauge drawcord with metal eyelets and 1x1 ribbing at cuffs and waistband. 8.5 oz fleece80% cotton 20% polyester blend100% cotton 20 singles face yarnSplit stitch double needle sewing on all...

$0 Price: $40.00-$44.55

Buy Details

Availability: In-Stock Item
Item #: Team_Cougar_Quarter_Zip -

This sporty quarter-zip sweatshirt features a Mercury man on the front left chest, "Mercury" script down the right arm, and a Team Cougar logo on the back. A cool tribute to the winning 1967 Trans Am team, and a great way to represent the brand while staying warm. 8.0 oz., pre-shrunk 50/50 cotton/polyester1x1 athletic rib with spandexBrass zipper and dark grey trimSelf fabric lined collarSatin labelDouble needle stitching at waistband and cuffsQuarter-turned ...

$0 Price: $78.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0108 -

Plunger switch that mounts to the air distribution manifold behind the center A/C vent. A mechanical lever operates the switch when the air damper is in the proper location to distribute air through the center air conditioning vent of the dash. This switch controls the clutch on the A/C compressor. 1967-68 Mercury Cougar and 1966-67 B Body Ford, Fairlane, Ranchero, and C Body Mercury Comet and other variations Cyclone etc. Tested and working switch. On Cougar and Mustang it attaches to the...

$0 Price: $134.85

Buy Details

Availability: Rare / NOS Part
Item #: 32747 -

This A/C fan switch mounts to the rear of the factory installed air conditioning ventilation control panel. NOS, new old stock part. Save your knobs or consider purchasing the 1969-73 selector button kit. Click this LINK for those little beauties.Ford part # C9ZZ-19986-A.

$0 Price: $100.25

Buy Details

Availability: In-Stock Item
Item #: 30993 -

This reproduction A/C fan switch mounts to the rear of the factory installed air conditioning ventilation control panel.  Save your knobs or consider purchasing the 1969-73 selector button kit, you can find them here.Ford part # C9ZZ-19986-A.

$0 Price: $88.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0039 -

This A/C fan switch mounts to the rear of the factory installed air conditioning ventilation control panel. We always test all of our electrical components and this is a good working switch and wiring pigtail with plug. Save your knobs or consider purchasing the 1969-73 selector button kit. Click this LINK for those little beauties.Ford part # C9ZZ-19986-A.

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0045 -

This used A/C fan switch mounts to the rear of the factory installed air conditioning ventilation control panel on your Mercury Cougar or Ford Mustang. Good working switch and wiring pigtail with plug. Save your knobs or consider purchasing the 1969-73 selector button kit.Ford part # D1ZZ-19986-A.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0109 -

Used air conditioning thermostat switch for any 1967-68 Mercury Cougar or Ford Mustang with integral or factory A/C. Attaches to the side of the fiberglass box under the dash, the wire probe gets inserted into the evaporator. Tested and working switch. These were originally manufactured by Ranco for Ford. Ford part numbers C7ZA-19618-C or C7ZZ-19618-A.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0307 -

Used air conditioning thermostat switch for any 69-70 Mercury Cougar or Ford Mustang with integral or factory A/C. Attaches to the side of the fiberglass box under the dash

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0110 -

Used air conditioning thermostat switch for any 1971-73 Mercury Cougar or Ford Mustang with integral or factory A/C. Attaches to the side of the fiberglass box under the dash, the wire probe gets inserted into the evaporator. Tested and working switch. These were originally manufactured by Cutler-Hammer for Ford. Ford part numbers D1ZA-19618-A or D1ZZ-19618-A.

$0 Price: $25.55

Buy Details

Availability: In-Stock Item
Item #: 11297 -

Backup light switch for factory installed Hurst competition shifters from 1970-73. This is a Daniel Carpenter reproduction, these are still being made by Hurst in small quantities (see our premium version). It does not include the bracket for holding the switch.Listed in the Motorcraft catalog as SW-943Also fits:CometFairlaneMontegoTorino Check out our video on rebuilding your shifter below: ...

$0 Price: $69.55

Buy Details

Availability: Out of Stock
Item #: 41562 -

C7ZZ-15520-C Backup lamp switch that mounts to the factory 3 speed shifter linkage. 67 - 68 Mercury Cougar and Ford Mustang applications. Autolite or Motorcraft switch number SW-573.*Note - 3 speed switches are different than the 4 speed switches.

$0 Price: $57.35

Buy Details

Availability: In-Stock Item
Item #: 14317 -

Reproduction backup lamp switch that mounts to the factory 4 speed shifter linkage. 67 - 68 Mercury Cougar and Ford Mustang applications. Autolite or Motorcraft switch number SW-561. Replaces Ford part number C7ZZ-15520-A.*Note - 4 speed switches are different than the 3 speed switches.

$0 Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 41539 -

Reproduction Backup Light Switch / Manual Transmission / 4 Speed for the 1969 Mercury Cougar / 1969 Ford Mustang