Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 9457-9504 of 13416
Price: $241.67

Buy Details

Availability: In-Stock Item
Item #: 30894 -

Three piece Thermactor Smog hose set; moulded, striped, and stamped like original factory installed hoses. The 1968 ink stamped was likely used partially into 1969. We also list hoses with the C9... stamps.Fits: 1968 Ford and Mercury S code 390-4V engines sold in the US.1968 Ford and Mercury W code 427-4V engines sold in the US1968 / 1969 428 Cobra Jet engines. 1968 / 1969 428 Super Cobra Jet engines. ...

Price: $15.53

Buy Details

Availability: Out of Stock
Item #: 12977 -

This fail safe thermostat can save you from costly engine damage during an overheat. They feature an exclusive technology that locks the valve open position if overheating occurs. This allows for maximum coolant flow when you need it most.

Price: $9.95

Buy Details

Availability: In-Stock Item
Item #: 31169 -

Temperature thermostat for use in very early 1967 cars with 390 engines.  2-1/2 inches in diameter, 195°degree opening like OEM Ford. This is a Stant brand of thermostat. Note, this is a larger diameter thermostat than the common one used on a small block and most Ford engines. Only used with the intake and thermostat housing with large size diameter of 2-1/2 inches.

Price: $17.28

Buy Details

Availability: In-Stock Item
Item #: 14334 -

Fits all* Ford V-8 engines, 1967 - 1973. *- NOTE: This will fit in the 351C, 351M or 400 but will not block off the port to recirculate the water back through the engine.  This can cause the engine to run hotter than desired.

Price: $42.95

Buy Details

Availability: In-Stock Item
Item #: 30466 -

Reproduction concours correct premium thermostat for the 351C. This is the correct thermostat you would use in conjunction with the new concourse restrictor / by-pass plate on 70 - 73 Cougars and Mustangs equipped with a 351 Cleveland engine. This is a the assembly line style thermostat.  Replaces Ford part number D0AE-8575-B.

Price: $19.18

Buy Details

Availability: In-Stock Item
Item #: 14332 -

Fits all* Ford V-8 engines, 1967 - 1973. *- NOTE: This will fit in the 351C, 351M or 400 but will not block off the port to recirculate the water back through the engine.  This can cause the engine to run hotter than desired.

Price: $19.18

Buy Details

Availability: In-Stock Item
Item #: 14329 -

Fits all* Ford V-8 engines, 1967 - 1973. *- NOTE: This will fit in the 351C, 351M or 400 but will not block off the port to recirculate the water back through the engine.  This can cause the engine to run hotter than desired.

Price: $29.82

Buy Details

Availability: In-Stock Item
Item #: 14300 -

Cast construction with very good quality chrome. Looks great with chrome valve covers and air cleaner. For some helpful tips on upgrading your Cougar (or Mustang) cooling system, check out our video:

MSRP:$22.85
Price: $19.67

Buy Details

Availability: In-Stock Item
Item #: 14017 -

Aluminum casting, made in the U.S.A. Exact copy of original, including part numbers. Fits any small block Ford 260/289/302/351W but would have only been correct on 1967 Mercury Cougar and 1965-67 Ford and Mustang with 289 engines. Has natural cast finish as original. Does not have the provision for the thermal vacuum switch starting in 1968 and newer small block Ford V-8 engines. Replaces Ford Part #: C5OE-8592-A For some helpful tips on upgrading your Cougar (or Mustang) cooling system, check...

Price: $30.07

Buy Details

Availability: In-Stock Item
Item #: 10657 -

New water neck or thermostat housing for all 1967-70 Mercury Cougars or most other Fords with 289/302/351W engines. Cast aluminum with a shiny finish as shown. Removable plug for use with thermal vacuum switches. Comes complete with gasket.

Price: $28.67

Buy Details

Availability: In-Stock Item
Item #: 10656 -

Thermostat water neck or 'Connection - Water Outlet' as it is called in the Ford manuals. Fits 1970-73 351C or 351 Cleveland engines as found in 1970-73 Mercury Cougars and most all other Fords with the 351C engine. Cast aluminum housing.*Note - original water necks were cast iron, this is cast aluminum.Gasket not included. Find it here.

Price: $414.77

Buy Details

Availability: Out of Stock
Item #: 32670 -

Used aluminum water neck of thermostat housing for mid-LATE 1967 Mercury Cougar or most other Fords with 390 / 428 engines. Cast aluminum finish. For use with common 2-1/8 inch thermostats. Correct for 1967 FE engines after about 11/1/1966. Not going to lie, these will show some signs of electrolysis on the inside and where the hose slips on. No thermal switch provision. This is a very hard part to find with the C7AE-8594-A casting number.  *Note - very early 1967 cars were...

Price: $30.07

Buy Details

Availability: In-Stock Item
Item #: 10658 -

New water neck of thermostat housing for most 1967-70 Mercury Cougar or most other Fords with 390/427/428CJ engines. Cast aluminum without casting marks, sand cast finish. Comes with screw-in cap in place of the thermal switch if you like, includes gasket. For use with common 2-1/8 inch thermostats. *Note - very early 1967 cars were still using the 2-1/2 inch thermostats. Cutoff was around November 1966.

Price: $52.97

Buy Details

Availability: Out of Stock
Item #: 31398 -

Used aluminum water neck of thermostat housing for most 1967-70 Mercury Cougar or most other Fords with 390/427/428CJ engines. Cast aluminum finish. Comes with threaded hole for either a screw-in cap, or thermal switch. For use with common 2-1/8 inch thermostats. Correct for 1968-70 FE engines. Not going to lie, these will show some signs of electrolysis on the inside and where the hose slips on. Additionally, we notice that the threads get a bit rotted out where the thermal switch...

Price: $38.25

Buy Details

Availability: In-Stock Item
Item #: 41584 -

Reproduction aluminum cast A356 water neck for FE Big Block engines. Made from original factory blueprint, and includes the correct stamping. Will fit the 67 Big Block, but markings are correct for 68. Replaces Ford Part #: C8AE-8592-B.

Price: $24.44

Buy Details

Availability: In-Stock Item
Item #: 31168 -

New water neck of thermostat housing for EARLY 1967 Mercury Cougar or most other Fords with 390 engines. Cast aluminum without casting marks, sand cast finish.  Includes gasket, for use with common 2-1/2 inch thermostats.  *Note - mid to late 1967 cars used the smaller 2-1/8 inch thermostats. Cutoff was around November 1966.

Price: $5.95

Buy Details

Availability: In-Stock Item
Item #: 14-0035 -

New blue removable strength thread locker for your project. This is a must have item if you are reassembling your pride and joy after restoration or just changing out parts. Often times, the vibrations from these antiques can vibrate loose the fasteners used to hold it together. If you use this, you can rest assured that your Merc or Ford will not fall apart from fasteners that have vibrated loose.

Price: $12.15

Buy Details

Availability: In-Stock Item
Item #: 14-0027 -

New red permanent strength thread locker for your project. This is a must have item if you are reassembling your pride and joy after restoration or just changing out parts. Often times, the vibrations from these antiques can vibrate loose the fasteners used to hold it together. If you use this, you can rest assured that your Merc or Ford will not fall apart from fasteners that have vibrated loose.

Price: $17.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25485 -

Bracket that mounts to firewall for accelerator shaft. 1971-73 Mercury Cougar and Ford Mustang. 

Price: $40.05

Buy Details

Availability: In-Stock Item
Item #: 31878 -

Reproduction throttle cable for the Cougar or Mustang equipped with the 351 engine.Cable length 22.50 inches long.  *Note - Used on Cougars prior to 7/10/1972 look at your throttle pedal end.

Price: $40.05

Buy Details

Availability: Out of Stock
Item #: 31879 -

Reproduction throttle cable for the Cougar or Mustang equipped with the 351 engine. Cable length 24 inches long, check your application. There were size differences between the 2V and the 4V engines. Replaces Ford part number D3ZZ-9A758-C. *Note - Used on 1972 Cougars after 7/10/1972 and all 1973 Cougar and Mustangs. Look at your throttle pedal end for verification. I doubt that date, I think it was much earlier, than July 1972. ...

Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25484 -

Cable length 22.50 inches long. Has clevis and pin on the end for attaching to the throttle pedal assembly. *Note - Used on Cougars prior to 7/10/1972 look at your throttle pedal end.

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25613 -

Throttle cable for many 1972 and all 1973 Mercury Cougar and Ford Mustang H code 351-2V engines. Cable length 23-3/4 inches long. Uses a green plastic bushing to attach to the throttle pedal. We believe that the MPC is wrong on the length. Our observations are that the 2V cable is longer than the 4V version.Replaces Ford part number D3ZZ-9A758-B.*Note - Used on 1972 Cougars after 7/10/1972 and all 1973 Cougar and Mustangs. Look at your throttle pedal end for verification. I doubt that...

Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25614 -

Throttle cable for many 1972 and all 1973 Mercury Cougar and Ford Mustang Q code 351-4V engines. Cable length 23 inches long. Identified by the blue plastic bushing on the throttle pedal end of the pedal. We believe that the MPC is wrong on the stated length, the 4V cable is shorter than the 2V version.Replaces Ford part number D3ZZ-9A758-C.*Note - Used on 1972 Cougars after 7/10/1972 and all 1973 Cougar and Mustangs. Look at your throttle pedal end for verification. I doubt that...

Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18555 -

Ford part #: C9ZZ-9A758-A. All V-8 engines. The plastic portion that is designed to cover the cable at its furthest point by the carburetor will be broken. This is how the vast majority are for 1969, very rare to find a perfect one. Notice there are two versions for 1969, one has a plastic connector that mounts to the firewall and the other version is metal.

Price: $26.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18594 -

This is a damaged but functional part. The plastic will be broken near the end thus exposing the cable.

Price: $40.05

Buy Details

Availability: In-Stock Item
Item #: 41813 -

Replaces Ford part #: C9ZZ-9A758-A.  This updated Throttle cable is decent quality. Thicker stranded cable, correct dimensions with a good fit. A basic replacement cable. Approximately 23" in length.

Price: $37.67

Buy Details

Availability: In-Stock Item
Item #: 30137 -

Reproduction throttle cable for the 1970 Cougar or Mustang. Replaces Ford part number C9ZZ-9A758-E

Price: $43.07

Buy Details

Availability: In-Stock Item
Item #: 13950 -

Kit comes complete with accelerator linkage rod, bushings and clip kit and return spring. Replaces Ford Part #: C5ZZ-9A702.

Price: $15.17

Buy Details

Availability: In-Stock Item
Item #: 13933 -

Great little kit that is a big time saver! Correct in detail, every 40 year old Cougar needs this kit! Replaces Ford Part #: C5ZZ-9A702-MK.

Price: $10.05

Buy Details

Availability: In-Stock Item
Item #: 14071 -

Reproduction Accelerator Pedal for the 1969 and 1970 Mercury Cougar

Price: $19.15

Buy Details

Availability: In-Stock Item
Item #: 11808 -

Nice new black moulded plastic gas pedal pad for all 1971, 1972 and 1973 Mercury Cougars regardless of engine or transmissions. Replaces Ford Part #: D1ZZ-9735 and D1ZZ-9735-A

Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26194 -

Black moulded plastic pedal pad for all 1967 and 1968 Mercury Cougars regardless of engine or transmissions. Used pads with various amounts of wear on the surface. Stainless surround trim available too - Part number C5ZZ-9735-A.

Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24878 -

Black moulded plastic pedal pad for all 1969 and 1970 Mercury Cougars regardless of engine or transmissions. Used pads with various amounts of wear on the surface. Stainless surround trim available too - Part number C9OZ-9735-A.

Price: $4.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25480 -

Black moulded plastic gas pedal pad for all 1971, 1972 and 1973 Mercury Cougars regardless of engine or transmissions. Used pads with various amounts of wear on the surface. Ford part number: D1ZZ-9735 or D1ZZ-9735-A Stainless surround trim available too, part number D1ZZ-9735-B.

Price: $87.35

Buy Details

Availability: In-Stock Item
Item #: 30923 -

Accelerator pedal assembly that mounts to the engine firewall. For use with any 1969 Cougar or Mustang WITHOUT factory cruise control.

Price: $20.55

Buy Details

Availability: In-Stock Item
Item #: 41870 -

Concours Throttle Return Spring for the 390 / 428CJ / 428SCJ Manufactured after 4-9-69

Price: $7.15

Buy Details

Availability: In-Stock Item
Item #: 13951 -

Correct spring, black phosphorus plated. Does not have the same tension as original spring. We also have a Concours spring that has the correct tension. Replaces Ford Part #: C5ZZ-9737-B.*Trivia* Did you know the first Cougar cast for production in 1968 was this "Custom Cougar"? This fine example was offered up on ebay summer 2008 for a mere $6500.

Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30192 -

Metal rod that hooks to the carburetor linkage and the accelerator pedal bellcrank, or shaft. Hooked end goes into the carburetor linkage, threaded end to the rear. Application 1967 Mercury Cougar and 1964 - 1967 Ford Mustang with 289 engines. Ford part number C5ZZ-9A-702-A. A rod end clevis clip is needed for attachment to the carburetor - see part B7A-9826-A. *Note - not for use with factory cruise control.

Price: $10.95

Buy Details

Availability: In-Stock Item
Item #: 13952 -

Good reproduction of the 1967 throttle rod for 289 engines. It will fit on 1968 with any 289 or 302 engine with Ford Autolite carburetors. Will also fit most Holley and Edelbrock carburetors too. We also sell used versions of both 1967 and 1968 small block throttle rods. Consider also purchasing a linkage clip, see related items.Reference from mercurycougar.net: Best guys to always talk to about Cougars...will take the time on the phone with you, call you back if you leave a message, got all...

Price: $20.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11069 -

Metal rod that hooks to the carburetor linkage and the accelerator pedal bellcrank, or shaft. Hooked end goes into the carburetor linkage, threaded end to the rear. Application 1968 Mercury Cougar and Ford Mustang with 289 or 302 engines. Ford part number C8ZZ-9A-702-A. A rod end clevis clip is needed for attachment to the carburetor - see part B7A-9826-A. *Note - not for use with factory cruise control.

Price: $35.01

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11070 -

Metal rod that hooks to the carburetor linkage and the accelerator pedal bellcrank, or shaft. Rod measures 12.66 inches long. Hooked end goes into the carburetor linkage, threaded end to the rear. Application 1968 Mercury Cougar and Ford Mustang. A rod end clevis clip is needed for attachment to the carburetor - see part B7A-9826-A. Ford part number C8WY-9A702-A *Note - Before 12/11/1968. *Note - not for use with factory cruise control.