Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 8737-8784 of 13397
$0 Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19138 -

This shifter bucket is used on all 1967 - 1968 Mercury Cougars and Ford Mustang with an automatic center console. Bare bucket with good shift detentes and bushing hole that isn't worn out. Ford part number C7ZZ-7A306-A Check out our video on rebuilding your shifter below: ...

$0 Price: $80.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10474 -

This shifter bucket is used on all 1967 - 1968 Mercury Cougars and Ford Mustang without an automatic center console. Bare bucket with good shift detentes and bushing hole that isn't worn out. Ford part number C7ZZ-7A306-B. Check out our video on rebuilding your shifter This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to...

$0 Price: $2.88

Buy Details

Availability: In-Stock Item
Item #: 20122 -

If your automatic floor shifter has play in it left to right then this is the culprit. Easy to install, (more difficult if you have a 67-68 with center console) these are made from a wear resistant plastic that is better than original. Sold as a pair as two are required per car. This bushing was used in all Ford products equipped with a floor shift automatic from the 1965 Mustang to the late 70's Pinto. Replaces Ford Part # C5ZZ-7A133-A Check out our video on rebuilding your shifter below: ...

$0 Price: $55.89

Buy Details

Availability: In-Stock Item
Item #: 30824 -

Fit and and function wise this is the same as the 1968 - 1973 XR7 button. However if you want 100% correctness then the 1967 button is different and there are no reproductions for this exact button. The 1967 button has a concave surface, while the 1968-73 button is convex. See the comparison photo below with the 67 deluxe button (Left) next to the 68-73 button (Right). This is a replated part with no pits or cracks. Ford part number C7ZZ-7C488-B. $20 refundable core charge will be added. Click...

$0 Price: $38.88

Buy Details

Availability: In-Stock Item
Item #: 31250 -

Rechromed 1967 deluxe shifter button. Unique to the deluxe faux leather wrapped T handle shifter starting in 1967. One year only design, this one has a convex button for you thumb. Starting in 1968 the button was more rounded to comply with the added safety features mandated in 1968. Core deposit is required, fully refundable with returned 1967 deluxe button. Ford part number C7ZZ-7C488-B. Check out our video on rebuilding your shifter below: ...

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19044 -

Fit and and function wise this is the same as the 1968 - 1973 XR7 button and we suggest the quality reproduction we offer as a good replacement. However if you want 100% correctness then the 1967 button is different and there are no reproductions for this exact button. The 1967 button has a concave surface, while the 1968-73 button is convex. See the comparison photo below with the 67 deluxe button (Left) next to the 68-73 button (Right). This is a good used part with no pits or cracks. Ford...

$0 Price: $8.45

Buy Details

Availability: In-Stock Item
Item #: 10341 -

Steel retaining plate. Ford part number C5ZZ-7B233-A. This plate is needed to fasten the shift indicator bezel on non-console cars. Fits 1967-68 Mercury Cougar and 1965-68 Ford Mustang, without console. Nice reproduction part, better value than used. You may also need a set of 4 attaching screws. Check out our video on rebuilding your shifter below: ...

$0 Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41375 -

This group of parts mounts to the top of the AT shifter arm and rides against the thumb activated button on your T shift handle. Its function is to lift the cable that runs through the chrome shifter stem to lock and unlock the shifter out of Park. The Ford technical name for this part is 'Roller - Shift Lever Lock'. We carefully inspect each part to make sure it is in perfect used condition. Ford part number C5ZZ-7D328-A. Check out our video on rebuilding your shifter below: ...

$23.00 Price: $27.77

Buy Details

Availability: In-Stock Item
Item #: 14224 -

Exact reproduction for the 1967 - 1968. Perfect fit and finish. You may want to replace yours with this inexpensive unit just for the fresh new luster alone. Your plastic end buttons may have faded to gray but they were originally black like this one.Replaces Ford Part #: C5ZZ-7213-F.

$23.00 Price: $31.55

Buy Details

Availability: In-Stock Item
Item #: 12226 -

Exact reproduction for the 1969 - 1973. Perfect fit and finish. You may want to replace yours with this inexpensive unit just for the fresh new luster alone. Your plastic end buttons may have faded to gray but they were originally black like this one. Replaces Ford Part #: C8OZ-7213-A, C90Z-7213-B, D3OZ-7213-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $76.55

Buy Details

Availability: In-Stock Item
Item #: 13942 -

Stunning quality and far less likely to crack than the originals. The 67 version was actually a little different than 68 - 73 but you would have to look close to see the difference. Check out our video on rebuilding your shifter below: ...

$0 Price: $81.77

Buy Details

Availability: In-Stock Item
Item #: 13963 -

Not a very good color match for Cougar owners, but will work well with blue interiors.Stunning quality and far less likely to crack than the originals. The 67 version was actually a little different than 68 - 73 but you would have to look close to see the difference. Check out our video on rebuilding your shifter below: ...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10459 -

Allen head set screw for all stock Ford automatic shifter handles on any 1967-73 Mercury Cougar or Ford including Mustang. Uses the same 3/32 inch allen wrench for attaching as the originals. Most handles take two of these set screws, one on the dummy button, and one to attach to the top of the shifter lever. The 1973 all chrome shift handle only uses one of these set screws. Original Ford part number 374985-S. Check out our video on rebuilding your shifter below: ...

$0 Price: $52.75

Buy Details

Availability: In-Stock Item
Item #: 30310 -

A nice reproduction. Bright zinc finish. Ford type connectors for quick installation. Changing the bulb shroud allows this to be used with consoles. We also sell used 1967 pigtails. Bulb not included, get it here. Check out our video on rebuilding your shifter below: ...

$0 Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 14303 -

A nice reproduction. Bright zinc finish. Ford type connectors for quick installation. Not totally correct this one has a black plug with two different sized male connectors. Changing the bulb shroud allows this to be used with consoles. Originals had a blue plug. We also sell used 1967 pigtails. Bulb not included, get it here. Replaces Ford Part # C8ZZ-15A808-A Check out our video on rebuilding your shifter below: ...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27278 -

Good used shift indicator light and pigtail for the 1968 with automatic and without console. Comes as shown with the clip on diffuser for automatic shifter lever. The only difference between this shift indicator light without console and with console is the diffuser. The diffusers pull off and interchange. This light harness is also known as the PRNDL light harness (park, reverse, neutral, ...) The 1968 wiring harness has a blue double male plug. Fits 68 CougarFits 68 Mustang Check out our...

$0 Price: $96.45

Buy Details

Availability: In-Stock Item
Item #: 10233 -

Reproduction automatic shifter lever in chrome for the Mercury Cougar or Ford Mustang. Comes with inside cable parts. See the related items for more of your shifter needs. Check out our video on rebuilding your shifter below: ...

$0 Price: $261.77

Buy Details

Availability: Out of Stock
Item #: 41481 -

Reproduction Hurst shift lever for all 1970 and 1971 Mercury Cougar or Ford Mustang with factory installed Hurst shifters. Excellent reproduction in every way.Link to the expert on Ford shifter linkages.Click on images to enlarge. ...

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23889 -

C5ZZ-7210-C Shift lever for all 1967 Mercury Cougar and Ford Mustang and 1968 until 1-2-1968. The early lever can be identified by measuring the distance between bolt holes. 1-13/16" spacing between the holes is the C5ZZ-7210-C lever. *Note - Must be used with Trunion C5ZZ-7210-D, sold separately.

$0 Price: $291.75

Buy Details

Availability: In-Stock Item
Item #: 41480 -

Reproduction 4 Speed shifter lever for any 1969 Mercury Cougar and Ford Mustang with V-8 engines. Original Ford part number C9ZZ-7210-B. Excellent reproduction. Link to the expert on Ford shifter linkages.  *Note - Must be used with Trunion C9AZ-7210-J, sold separately. Check out our video on rebuilding your shifter below: ...

$0 Price: $182.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23891 -

C5ZZ-7210-M 4 Speed shifter lever with reverse lockout provision. For any 1967 Mercury Cougar and Ford Mustang with V-8 engines. *Note - Must be used with Trunion C5ZZ-7210-D, sold separately.

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41378 -

Very nice chrome on this used shifter lever for automatic transmissions. Can fit all 1969-73 Mercury Cougar and Ford Mustangs with FMX or C-6 automatic transmissions. We have found that there is an early and a late version of these levers. The early versions used the C5ZZ-7C442-A pawl. The easiest way to determine which is early or late is the width of the slot at the bottom of the lever. If one nickel fits into the slot, it is early. Two nickels will easily fit into the later slot. Bare...

$0 Price: $36.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10463 -

Very nice chrome on this used shifter lever for automatic transmissions. Can fit all 1969-73 Mercury Cougar and Ford Mustangs with FMX or C-6 automatic transmissions. We have found that there is an early and a late version of these levers. The late versions used the C9ZZ-7C442-A pawl. The easiest way to determine which is early or late is the width of the slot at the bottom of the lever. If one nickel fits into the slot, it is early. Two nickels will easily fit into the later slot. Bare...

$0 Price: $245.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10974 -

C5ZZ-7400-D 4 Speed manual transmission shift control assembly for any 1967 Mercury Cougar and Ford Mustang and 1968's up until 1-2-1968.

$0 Price: $23.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41373 -

Automatic shifter arm pawl - late version. Mounts inside the bottom of the shifter arm in the slot with the cable and spring. Fits original chromed shifter levers or arms 1970-73 Mercury Cougar and Ford Mustang. The early pawl has a key with a thickness of 0.100", the later (1970ish-73) with a thickness of 0.159". Check your shift lever for the size that you need. Ford part number D0ZZ-7C442-A.We also list the early version. Check out our video on rebuilding your...

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0026 -

Adjustable rod that connects the floor shifter to the "Select-Shift-Merc-O-Matic" automatic transmission. C4 transmissions only, code "W" on your door data plate tag. Small block 289/302 engines received the C-4 automatic transmissions. Rod marked C7ZA-7326-B. Shift rod approximately 17-1/4 inches long. Check out our video on rebuilding your shifter below: ...

$0 Price: $40.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33061 -

Adjustable rod that connects the floor shifter to the "Select-Shift" automatic transmission. C4 transmissions only, code "W" on your door data plate tag. All 302 and 6 cylinder engines received the C-4 automatic transmission. Rod with casting number C9ZA-7326-D. Shift rod approximately 17-1/4 inches long. 1969 Ford Mustang only. Check out our video on rebuilding your shifter below: ...

$0 Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0028 -

Adjustable rod that connects the floor shifter to the "Select-Shift" automatic transmission. FMX transmissions only, code "X" on your door data plate tag. All 351 engines received the FMX automatic transmission. Rod with casting number D0ZA-7340-A. Shift rod approximately 18 inches long. Ford part number D0ZZ-7326-D. 1970 only. Check out our video on rebuilding your shifter below: ...

$0 Price: $95.27

Buy Details

Availability: In-Stock Item
Item #: 33220 -

Reproduction adjustable rod that connects the floor shifter to the big block C-6 automatic transmissions. C6 transmissions only, code "U" on your door data plate tag. FE big block 390/427/428CJ engines received the C-6 automatic transmissions.Includes pin and nut. Shift rod approximately 18 inches long. Replaces Ford part number marked C7ZA-7326-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $229.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0032 -

Adjustable rod that connects the floor shifter to the big block C-6 automatic transmissions. C6 transmissions only, code "U" on your door data plate tag. FE big block 390/427/428CJ engines received the C-6 automatic transmissions. Shift rod approximately 17 inches long. Rod marked C7ZA-7326-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0029 -

Adjustable rod that connects the floor shifter to the "Select-Shift" automatic transmission. FMX transmissions only, code "X" on your door data plate tag. Most 351-2V engines received the FMX automatic transmission. Rod originally had a "Yellow" paint daub for identification purposes on the Dearborn assembly line. Shift rod approximately 18-1/2 inches long. Rod stamped D1ZA-7340-AA. Check out our video on rebuilding your shifter below: ...

$0 Price: $18.35

Buy Details

Availability: In-Stock Item
Item #: 13007 -

4-Speed shifter rod hardware kit for 67 - 68 Cougars and Mustangs with a 4-speed transmission. Check out our video on rebuilding your shifter below: ...

$0 Price: $3.15

Buy Details

Availability: In-Stock Item
Item #: 13928 -

This hard plastic part slips over your floor shifter stem and keeps coins and such from falling inside your center console. Replaces Ford part number C7ZZ-7C445-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: 41498 -

Replacement spring for 1969 Ford four speed shifters. This spring maintains shifter tension for the reverse shift gate. Check out our video on rebuilding your shifter below: ...

$0 Price: $52.15

Buy Details

Availability: In-Stock Item
Item #: 31011 -

Reproduction "U" shaped bracket that attaches the 3 /4 speed shift lever to the shifter control assembly. For use on all 67 - 68 Mercury Cougar and Ford Mustangs with the 3 or 4 speed shift lever, and 1968 shift levers through 1-2-1968. Measurement of hole spacing is 1-13/16 inches on center. *NOTE - Must be used with 3 speed shift lever C5ZZ-7210-C, or 4 speed shift lever C5ZZ-7210-M. Replaces Ford part number C5ZZ-7210-D Check out our video on rebuilding your shifter below: ...

$0 Price: $87.48

Buy Details

Availability: In-Stock Item
Item #: 26685 -

KYB Gas-a-just shock absorbers are America's best selling performance gas shock. It's monotube design features a higher gas pressure which helps to hold the tire to road surface during severe driving conditions. N2 gas helps eliminate shock fading due to aeration and foaming. This shock is the perfect choice for the performance oriented.  These units are sold individually. Manufacturer Specs: ExtendedCompressedStrokeCoverInternal StopExternal Stop12.328.53.82-X- ...

$0 Price: $86.09

Buy Details

Availability: In-Stock Item
Item #: 26695 -

KYB Gas-a-just shocks are America's best selling performance gas shock. It's monotube design features a higher gas pressure which helps to hold the tire to road surface during severe driving conditions. N2 gas helps eliminate shock fading due to aeration and foaming. This shock is the perfect choice for the performance oriented. These units are sold individually. Manufacturer Specs: ExtendedCompressedStrokeCoverInternal StopExternal Stop14.029.614.41-X- ...

$0 Price: $55.65

Buy Details

Availability: In-Stock Item
Item #: 14138 -

These are equal in performance to other name brand high pressure gas shocks at a significant lower price. These shocks are best suited for drivers looking for firm ride with a solid controlled “feel of the road”. These units are sold individually.

$0 Price: $61.45

Buy Details

Availability: In-Stock Item
Item #: 26687 -

This gas shock absorber improves handling without sacrificing ride comfort. A very good choice for the daily driver wanting a smooth ride with the response of a gas shock. These units are sold individually. Manufacturer Specs: ExtendedCompressedStrokeCoverInternal StopExternal Stop13.98.95-X- ...

$0 Price: $46.76

Buy Details

Availability: In-Stock Item
Item #: 26683 -

This gas shock improves handling without sacrificing ride comfort. A very good choice for the daily driver wanting a smooth ride with the response of a gas shock. Also, this is the most stock-looking shock since it's black and has a flat upper collar. These units are sold individually. Manufacturer Specs: ExtendedCompressedStrokeCoverInternal StopExternal Stop14.259.334.92-X- ...

$0 Price: $62.45

Buy Details

Availability: In-Stock Item
Item #: 12172 -

These shocks are the as close to original specs as possible for the Mercury Cougar. This is the comfort shock for those looking for a softer ride. The KYB Gas-a-Just shocks use higher gas pressure to keep your tires glued to the road. The KYB Gas-a-Just shocks' velocity-sensitive valving system adjusts quickly to changing road conditions for maximum comfort in any situation. Their mono tube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their...

$0 Price: $87.22

Buy Details

Availability: In-Stock Item
Item #: 26714 -

These shocks are the as close to original specs as possible for the Mercury Cougar. This is the performance shock for those looking for firmer ride. The KYB Gas-a-Just shocks use higher gas pressure to keep your tires glued to the road. The KYB Gas-a-Just shocks' velocity-sensitive valving system adjusts quickly to changing road conditions for maximum comfort in any situation. Their mono tube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their...

$0 Price: $55.65

Buy Details

Availability: In-Stock Item
Item #: 41624 -

Keep in mind these will work on the Cougar but are designed for the Mustang which has a lower maximum spring travel. If your Cougar is lowered in the rear by an inch or more these will be spot on.Sold individually

$0 Price: $68.35

Buy Details

Availability: In-Stock Item
Item #: 13065 -

This gas Shock Absorber improves handling without sacrificing ride comfort. A very good choice for the daily driver wanting a smooth ride with the response of a gas shock.  These shocks are sold individually and are designed more specifically to work with Cougars as opposed to Mustang. Manufacturer Specs: ExtendedCompressedStrokeCoverInternal StopExternal Stop19.3711.308.07X-- ...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24632 -

Application: most 1967-1973 with any V-8 engine. A Right and Left bracket are needed for most applications. Including all 1968 - 1970 428 CJ automatic transmission Cougars. **Excludes 1969 - 1970 Boss 302 & 428 Cobra Jet 4 speed Cougars. That application had staggered rear shock plates. Hint - that would be two C9OZ-5796-C right side shock plates.Replaces Ford part number C9OZ-5796-B.

$0 Price: $43.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24633 -

Passenger side shock mounting plate for any 1967-73 Mercury Cougar with any V-8 engines. A passenger side and **driver side bracket are needed for most applications.  **Excludes 1969 - 1970 Boss 302 & 428 Cobra Jet 4 speed Cougars. Additionally 1972 - 1973 351CJ (Q code engines - all transmissions) which all came with staggered rear shocks, which was part of those years Competition Handling Package. These applications had staggered rear shock plates. Order two C9OZ-5796-C right...

$0 Price: $59.85

Buy Details

Availability: In-Stock Item
Item #: 30719 -

Reproduction shock support for the 67 - 68 Cougar. This support sits underneath the transition hump and attaches the upper mounts of each rear shock. The shock hardware is accessible through two access holes on the hump.

$0 Price: $450.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33569 -

Used upper shock mount cross member for Q code 351CJ and 351C-4V Cougars from 1972-73. We think. Probably includes 4 speed cars too from 1971. Bracket appears to be slightly different than the Mustang version of the same generation. Pretty rare bracket, likely needed the competition handling package option, with the 351C-4V engines. Basic Ford part number is 18A000. This is the rear upper shock cross member, designed for staggered rear shocks. Notice the missing hole for the passenger...