Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 529-576 of 13416
MSRP:$24.00
Price: $20.57

Buy Details

Availability: In-Stock Item
Item #: 13701 -

91 pages or diagrams, exploded views and part numbers. This assembly manual was used by the factory workers and shows great details on routing your wiring, great for the person who is assembling their car after it has been apart for some time.

MSRP:$24.00
Price: $20.57

Buy Details

Availability: In-Stock Item
Item #: 25889 -

101 pages of diagrams, exploded views and part numbers. This assembly manual was used by the factory workers and shows great details on routing your wiring, great for the person who is assembling their car after it has been apart for some time.

Price: $18.25

Buy Details

Availability: In-Stock Item
Item #: 13702 -

This manual shows exploded diagrams and part numbers of all the motors Ford used in 1969, not just the Cougar. I use this manual almost daily for identifying air conditioning brackets and various pulleys.

MSRP:$24.00
Price: $18.25

Buy Details

Availability: In-Stock Item
Item #: 25885 -

This manual shows exploded diagrams and part numbers of all the motors Ford used in 1967, not just the Cougar. I use this manual almost daily for identifying air conditioning brackets and various pulleys.

MSRP:$24.00
Price: $18.25

Buy Details

Availability: In-Stock Item
Item #: 25891 -

49 pages of exploded factory diagrams and part numbers. This is a reprint of the manual used by the factory workers back in the day. This is a MUST HAVE if your Cougar is in the reassembly stage, great resource for taking your car apart as well.

MSRP:$96.00
Price: $66.87

Buy Details

Availability: In-Stock Item
Item #: 19211 -

Get the Body, Interior, Electrical, and Chassis Assembly Manuals as a set and save big. These are a must have for anyone doing their own repairs. Even if you pay others to do your repairs you should always have these in hand when you hand the keys to your mechanic as it will save whoever does the work hours. These are the blueprints the line workers used to build these cars in the day. Every nut bolt and clip is shown. The exploded diagrams make it easy to know what goes where. You need to...

Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0057 -

This is a used A/C center vent attaching clip. Two required per center AC vent, the two tiny tabs fit in the holes on the sides of the vent assembly and when you tighten the Phillips screw it will pull the vent tight against the dash pad. Very hard to come by, others have used silicone to bond the chrome vent in place when clips could not be found.Replaces Ford part number C7AZ-14570-A.

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26107 -

Captured washer, or spinning washer nut for attaching the headlamp motors or vacuum actuators on the 1969-70 Mercury Cougar. All models, Standard Hard Top, XR7, and Eliminator. Two needed per car, sold individually.

Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23370 -

Reservoir Attaching Nut 351335-S38 - Used Nuts for attaching the oil reservoir to the pump. The larger of the two nuts goes against the can. Threads of 5/8"-18 to fit the high pressure port. This is a pair of nuts, one tall and one short. Please follow the assembly procedures for the Ford power steering pump in the Ford shop manuals. Fits all small block V-8 engines, except for 1970 with 351 engine, and Mustang with 302 engines. 1970 302 / 351 engines used a different pump with an offset...

Price: $11.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12380 -

Used Nuts for attaching the oil reservoir to the pump. Two nuts used for attaching the reservoir to the pump. Nuts fit the high pressure port. This is a pair of nuts. Please follow the assembly procedures for the Ford power steering pump in the Ford shop manuals. Fits all small block V-8 engines, on 1970 Mercury Cougar and Ford Mustang. 1970 428CJ engines used a different pump with smaller diameter line fitting.

Price: $7.97

Buy Details

Availability: In-Stock Item
Item #: 13975 -

High quality rubber molded around a flexible steel insert. Insert is cadmium plated to prevent rust. A popular replacement item, as they always wear. While this unit also fits the 1965-68 Mustang, it is only correct for the 1968 Cougar XR7-G. Replaces Ford Part #: C5ZZ-7D351 Check out our video on rebuilding your shifter below: ...

MSRP:$24.99
Price: $18.05

Buy Details

Availability: In-Stock Item
Item #: 33033 -

This USB flash drive contains the complete Autolite 4300 carb information from overhauling, to diagnosis and repair. A must for anyone planning to work on their own carburetor. This USB contains detailed instructions on disassembly and assembly of all major components. This USB version of this manual is a great option for international customers. Light weight, and all you need is a PC, laptop or tablet (with USB support), and you can plug this drive in and access all the...

Price: $295.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30162 -

The automatic seat back release option for 1971 to early 1972 (before December 1971) Mercury Cougar and Ford Mustang. The automatic seat back release would pull the release lever on both of the bucket seats. This only happens when the either the driver or passenger side door is opened. Kit comes with the 1971- early72 specific wiring harnesses from the solenoid, includes 3 pin switch for the passenger pillar post, relay, solenoids, and cross over wiring. This option is best added to seats...

Price: $295.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30164 -

The automatic seat back release option for 1973 Mercury Cougar and Ford Mustang. The automatic seat back release would pull the release lever on both of the bucket seats. This only happens when the either the driver or passenger side door is opened. Kit comes with the 1973 specific wiring harnesses from the solenoid, includes 3 pin switch for the passenger pillar post, relay, solenoids, plug for retractable seat belts, and cross over wiring. This option is best added to seats prior to...

Price: $295.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30163 -

The automatic seat back release option for Mid 1972 (after December 1971) Mercury Cougar and Ford Mustang. The automatic seat back release would pull the release lever on both of the bucket seats. This only happens when the either the driver or passenger side door is opened. Kit comes with the mid 1972 specific wiring harnesses from the solenoid, includes 3 pin switch for the passenger pillar post, relay, solenoids, plug for retractable seat belts, and cross over wiring. This option is best...

Price: $175.05

Buy Details

Availability: In-Stock Item
Item #: 13826 -

This is for your automatic transmission 1970 Cougar. The 70 is unique over the 69 in that it does not have a provision for your seat belt buckles. This part does not require an additional woodgrain bezel that affixes to the top. Absolute perfection in every detail, if all reproductions were this nice there would be no market for used parts.

Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24630 -

Left side axle, 28 spline 27-1/16 inch length. For both 8 inch and 9 inch rear ends. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs.*Note Boss 302 and 428 CJ equipped Cougars came with heavy duty 31 splined axles.

Price: $104.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25081 -

Left side axle, 28 spline 27-13/16 inch length. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs. *Note 429 CJ equipped Cougars came with heavy duty 31 splined axles.

Price: $139.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24629 -

Right side axle, 28 spline 31-1/8 inch length. For both 8 inch and 9 inch rear ends. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs. *Note Boss 302 and 428 CJ equipped Cougars came with heavy duty 31 splined axles.

Price: $109.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25080 -

Right side axle, 28 spline 31-7/8 inch length. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs. *Note 429 CJ equipped Cougars came with heavy duty 31 splined axles.

Price: $230.04

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27516 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Bare 8 inch axle housing with proper axle pad spacing, vent location, brake line attaching, and fill plug in third member. Over-sized shipping length.

Price: $250.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24271 -

Bare housing with proper axle pad spacing for all 1967-1968 Cougars with 289 or 302 engines. Over-sized shipping length. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. This axle housing was used starting about mid 1967. It does not have the fill plug in the rear of the housing. * Important - Please check your car to verify that your 8 inch third member has a fill plug. Replaces Ford part number C7ZZ-4010-E. ...

Price: $399.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27514 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Housing overall width - 54-1/4 inches flange to flange. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Spring perches are 43 inches apart on center. Complete rear end housing - drum to drum, with axles, and with pumpkin. 1967 EARLY 8 inch rear end housings with fill plug in the steel housing as seen...

Price: $399.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24269 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Axles used: Passenger side - 31-1/8 inches long, Driver side 27 inches long. Complete rear end housing - drum to drum, with axles, and with pumpkin. For...

Price: $929.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24270 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Bare 9 inch axle housing with proper axle pad spacing, vent location, brake line attaching, and rear fill plug. Correct for all early 1967 big block Cougars. Over-sized shipping length.Axles used: Passenger side - 31-1/8 inches long, Driver side 27 inches long.

Price: $1,000.04

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27515 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Axles used: Passenger side - 31-1/8 inches long, Driver side 27 inches long. Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1967 late big block Cougars and 1967 Mustang GT. Over-sized shipping length. This is the late 1967 housing that incorporates the oil fill plug in the third member or pumpkin. *Tip* If you are looking to strengthen your 1967-68...

Price: $579.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24843 -

Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1969 Cougars. Over-sized shipping length. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Axles needed: Passenger side - 31-1/8 inches long, Driver side 27 inches long.

Price: $579.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25216 -

Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1970 Cougars. Over-sized shipping length. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Axles needed: Passenger side - 31-1/8 inches long, Driver side 27 inches long.

Price: $349.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25430 -

Housing overall width - 55-3/4 inches flange to flange. Spring perches are 43 inches apart on center. Bare housing with proper axle pad spacing for all 1971-1973 Cougars. Over-sized shipping length.Axles needed: Passenger side - 32 inches long, Driver side 28 inches long.

Price: $945.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25215 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. D0ZZ-4010-Assy 1970 9 Inch Rear End Housing Complete - Used Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Rear axle assembly - Housing, Axles, brake backing plates, and third member. 1970 housings are different from 1969 9 inch housings. 1970 housings have a separate vent tube, 1969 vent tubes are used to hold...

Price: $599.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25429 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Housing overall width - 55-3/4 inches flange to flange. Spring perches are 43 inches apart on center. Overall width measured from faces of axles, not the tips. All 1971-73 have the same overall width of 61 inches.  Rear axle assembly - Housing, Axles, brake backing plates, and third member. As removed from a 1971-73 West Coast Cougar organ donor car. We...

Price: $3.05

Buy Details

Availability: In-Stock Item
Item #: 15524 -

OEM style nut to hold the axle U-bolt to the axle. Fine threaded like originals 7/16-20 grade 5. Will not fit some reproduction U-bolts. Sometimes these are called shock plate bolts. Replaces Ford part # 379244-S

Price: $1,085.85

Buy Details

Availability: Out of Stock
Item #: 31861 -

Used pair of 31 spline axles for the 68 - 70 Cougar or Mustang, equipped with the Boss 302, 427 and 428 CJ engines all with 9 inch rear axles. Most all other vehicles used 28 spline axles. Short axle 27-1/16" inches long and long axle 31-1/8" inches long. Ford part numbers C9OZ-4234-C and C9OZ-4234-D. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs. ...

Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 14223 -

This lens comes without the correct FoMoCo logo, sold individually. Replaces Ford Part # C5ZZ-15514.

Price: $1.31

Buy Details

Availability: In-Stock Item
Item #: 26628 -

These Back Up Light Lens Gaskets are sold as a pair. Fits the 67 and the 68. Replaces Ford part # C5ZZ-15510.

Price: $3.55

Buy Details

Availability: Out of Stock
Item #: 26592 -

The correct color for the Cougar was gray but many prefer these black Mustang gaskets. Sold as a pair.

Price: $2.65

Buy Details

Availability: In-Stock Item
Item #: 26643 -

These Back Up Light To Rear Valance Seals are Sold as a pair. Fits the 67 and the 68. Replaces Ford part #: C7ZZ-15533. Note, gray is in fact the correct color for these, Mustang used black in 67-68. Note we also have black available for those who prefer.

Price: $5.75

Buy Details

Availability: In-Stock Item
Item #: 14188 -

These Back-Up Lamp Lenses are exact copies of the originals which come with the FoMoCo Logo. Sold Individually. Includes screws!

Price: $23.27

Buy Details

Availability: Out of Stock
Item #: 32436 -

Backer board for the sill plate on any 1971-73 Mercury Cougar or Ford Mustang. Also called a shield, it bridges the gap over the channel for the wiring harness. It is adjacent to the sill plate, and keeps the carpet from dropping into the exposed channel. This is a used part, and made from fiber cardboard type of material. See our reproduction item in the related items for a lower cost and made from more sturdy material. Original Ford part number D1ZZ-6513218-A. Two required per car, sold...

Price: $20.84

Buy Details

Availability: In-Stock Item
Item #: 32435 -

Backer boards (PAIR) for the sill plate on any 1971-73 Mercury Cougar or Ford Mustang. Also called a shield, it bridges the gap over the channel for the wiring harness. It is adjacent to the sill plate, and keeps the carpet from dropping into the exposed channel. This is a new part, and made from durable non paper material. See our  related items for used. Original Ford part number D1ZZ-6513218-A. Two required per car, sold as a pair.

Price: $94.37

Buy Details

Availability: In-Stock Item
Item #: 19191 -

Don't throw away those panels just because the backing boards are broken and warped! You cannot buy reproduction panels for the 67-70 Mercury Cougar, but you can get this pair of backer boards. If your vinyl is good, then you will want to put the work into them. These are not a quick fix, they do take time to install but the end result is worth it. These will work on your 67-68 XR7, Decor or Standard model as they are cut for all models and all options (i.e. manual remote mirror, courtesy...

Price: $94.37

Buy Details

Availability: In-Stock Item
Item #: 19295 -

Don't throw away those panels just because the backing boards are broken and warped! You cannot buy reproduction panels for the 67-70 Mercury Cougar, but you can buy this pair of backer boards. If your vinyl is good, then you will want to put the work into them. These are not a quick fix, they do take time to install but the end result is worth it. These will work on your 69-70 Xr7, Decor or Standard model as they are cut for all models and all options (ie manual remote mirror, courtesy...

Price: $34.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32503 -

Grille corner backing plate from a 1969 Mercury Cougar. This will be a driver side with the deep square groove on the side. There are two styles of 1969 grilles, we think that the early version did not have the extra gusseting for strength. We offer these for when they come up missing. These must be removed prior to restoration. We use a small die grinder or Dremel tool to grind the peened rivets on the grille housing. It is important to know which version of grille that you have, these do not...