Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 7729-7776 of 13397
MSRP:$295.00
$295.00 Price: $291.75

Buy Details

Availability: Out of Stock
Item #: 25980 -

FEATURES : KHE 300-USB Features: * Wireless Bluetooth; * Mini SD Card Reader; * USB Flash Drive; * 6 AM/6 FM Preset; * Manual Up/Down Tuning; * Seek Auto Tune; * Auto Stereo/Mono; * Preset Scan and Auto Store; * Front/Rear Fader Control; * On/Off Volume Control; * Separate Bass/Treble Control; * Left/Right Balance Control; * Auto Antenna Power Lead; * LCD Display with Blue Back Lighting; * Aux Input Rear; * Frequency Selector. Size: N/A * Output: 50 Watt x 4 Channel * System Power: 200 Watts...

$299.99 Price: $408.35

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 25998 -

Secretaudio SST is a hidden audio system that offers great flexibility for mounting in any type of vehicle. The main receiver/amplifier unit is usually hidden under the seat, or behind the dash. A 10ft cord from the Tuner/Amp plugs into a LCD display. The system can be operated from up to 40 feet away with the included RF (radio frequency remote.) Included with the system is a flush mount bezel for console or dash mounting. The small dimensions of the flush mount system allow you to install...

$170.00 Price: $229.23

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 25982 -

If you want great sound at an affordable price then this is the radio for you! Now with 200 watts and auxiliary input for iPod, MP3, satellite radio, etc. If you have a 1967 - 1968 Cougar with a center console, the knobs included will work. �?�AM-FM Stereo �?� 200 watts (4x50) �?� Rear Auxiliary Input �?� Electronic Tuning and Volume Control �?� Pre-set Scan �?� Digital Clock �?� Best Station Memory �?� 30 Pre-sets (12AM-18FM) �?� 4 Channel RCA Pre-outs �?� 4 way Fader �?� Separate Bass and...

$279.00 Price: $348.33

Buy Details

Availability: In-Stock Item
Item #: 25974 -

 The USA-630 is continuing to evolve in Custom Autosound’s quest for the perfect classic car radio. This radio has large OEM style push-buttons that give a perfect look in a classic dash. Although it looks classic it has the latest modern features that include an iPod doc. Navigation for the iPOD includes artist/song/album/playlist all from the buttons on the radio. A great feature so you can keep the iPod hidden away in your glove box or console. The USB input is still there on the back...

$0 Price: $398.46

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 12861 -

AM/FM RDS tuner with 25 presetsLCD display shows song / artist300 watts peak 2-Ohm stable7 LCD color choicesDimmer controlClock or function displayBluetooth and remote microphone includedUSB portDirect CD-I controlFront and rear auxiliary inputAlpha numeric display for MP3 / WMA / FLAC / WAVElectronic tuning and volume control and last volume memoryBass, mid, treble and tone controlloudness compensation for low volume listeningDSP EQFront / rear faderLeft / right balanceDigital clockHi volt 4...

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 11063 -

Nice reproduction 1967 Cougar and Mustang radio knobs for use with factory radios. For use without the console option, these have the later style and knob height. This reproduction knob set does not have any Ford casting numbers and are chromed metal knobs, not plastic. The inner knob on the 1967 AM radio station adjusting dial will need a white sleeve our part number 10022230. Factory radios with fader control will not need the sleeve.If you want to use these knobs on your 68, they will work...

$0 Price: $60.05

Buy Details

Availability: In-Stock Item
Item #: 13836 -

If you look close at our used set I do not think you could tell the difference, look at the back side in comparison to used and you will see a noticeable difference. *NOTE* The fifth part slips into the backside of the inner knob on the passenger side and acts as a spacer for Cougars or Mustangs without the rear fader option. The radios that would not utilize the white plastic spacer would be 1967 radios with factory rear speakers, 68-70 AM radios with rear speakers and 68-70 AM-FM radios. ...

$0 Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 15703 -

Finally, a reproduction radio knob set for your 1971-73 Mercury Cougar or Ford Mustang! These little units are very hard to find in NOS form or good used condition with flawless chrome. Most knobs are peeling bad enough to cut you if you are not being cautious. It's often little detail pieces like these that separate first and second place at car shows. These knobs do not fit aftermarket radios.Replaces Ford part #'s D1ZZ-18817-A for the outer (tuner / volume) knob, Ford casting #...

$38.99 Price: $44.85

Buy Details

Availability: In-Stock Item
Item #: 26015 -

Note: Not for use with aftermarket radios. Finding correct radio knobs for a 1968 Ford Mustang or Mercury Cougar equipped with a center console has been a huge obstacle for decades now. To clear the padded radio bezel cover, one must have these elusive, one year only, deep well knobs. These will also work on 1967 Cougar with console and although they would not be letter correct for anything but a 68 with a console, they do not look out of place on a 67 with console. Note that this four piece...

$0 Price: $23.65

Buy Details

Availability: In-Stock Item
Item #: 19959 -

This is a radio nut removal tool used to remove the radio shaft nuts. No more trying to remove those little units with the wrong tools and potentially damaging your bezel or dash. These are made from HRS steel and are milled to fit the shaft nut perfectly.

$0 Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19123 -

You can expect a grade A pad to have no burns or cracks and still be pliable. Count on painting it as there is almost always fading after 50 years and we may not be able to supply the color you need. When you order mention the color you desire and we will try to to accommodate.

$0 Price: $49.86

Buy Details

Availability: Out of Stock
Item #: 20694 -

Our grade B pad will show some fading and the vinyl will not be as pliable as Grade A.

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19245 -

Used grade B radio pad for the center console of the Mercury Cougar or Ford Mustang. This unit will be discolored from years of exposure to the sun and will be considered a driver quality at best. We rarely can provide the color you need due to the very limited supply we have. These pads always are separating from the metal backing to some degree. Other versions of Grade B might be cut for aftermarket radios. See pictures for some examples. Contact us to see if we have a pad that fits your...

$0 Price: $260.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19199 -

Upper console radio pad for the 1967 - 1968 Cougar XR7 with no cracks or burns. This is a grade "A" pad, so it will be in excellent condition with no or minimal shrinkage, separation, good color and no modifications or cuts. When you place your order mention in the order 'comments' what color you prefer and we will attempt to accommodate. We cannot guarantee that we can give your requested color, so plan on repainting this item. Even if we can provide your color, there is always some...

$0 Price: $32.85

Buy Details

Availability: Out of Stock
Item #: 18938 -

These anti static devices were installed under the front bearing dust caps on cars equipped with factory installed AM-FM radios. The part pictured is NOS, the one we currently have in stock is used. Sold individually.

$0 Price: $60.91

Buy Details

Availability: In-Stock Item
Item #: 10044 -

This Autolite capacitor is stamped with part number C6OA-18832-A. It attaches to one of the lugs on the voltage regulator, bullet lead plugs into wiring harness. Sometimes called a radio ignition interference suppressor. About 1-15/16" inches long. This is one of those small detail items that judges like. All Ford and Mercury vehicles from 1966-1971 used this "Autolite" marked capacitor when a radio was installed by the factory. Starting in 1972 there is a Motorcraft version which has a...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25488 -

This used voltage capacitor attaches to one of the lugs on the voltage regulator and the bullet lead plugs into wiring harness. Sometimes called a radio ignition interference suppressor, this unit is about 1-9/16" inches long. This is one of those small detail items that judges like to see in place. This little jewel is for all Ford and Mercury vehicles from 1972-1973 and used this "Motorcraft" marked capacitor when a radio was installed by the factory. Prior years, 1966-71, there is a...

$0 Price: $31.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23935 -

C6OA-18832-A is the number stamped into the end of the Autolite capacitor. Attaches to one of the lugs on the voltage regulator, bullet lead plugs into wiring harness. Sometimes called a radio ignition interference suppressor. About 1-15/16" inches long. This is one of those small detail items that judges like. Application all Ford and Mercury vehicles from 1966-1971 used this "Autolite" marked capacitor when a radio was installed by the factory.. Starting in 1972 there is a Motorcraft version...

$0 Price: $29.15

Buy Details

Availability: In-Stock Item
Item #: 10121 -

Reproduction rag joint for the fixed steering column in the Mercury Cougar or Ford Mustang. This assembly is for the fixed column only and will not work for the tilt / tilt away steering column. Our reproduction rag joint comes assembled with the lower splined casting. 

$0 Price: $38.75

Buy Details

Availability: In-Stock Item
Item #: 14252 -

This polyurethane steering coupler repair kit for your tilt column, commonly referred to as a "rag joint", connects the steering shaft to the input shaft on the steering box. Some customers feel polyurethane improves steering feel. Replaces factory steering coupler on 1967 - 1973 cars. Most 1967 Mustangs with fixed steering columns do not have coupler.Replaces Ford Part #: C7OZ-3A525 Check out this video ...

$0 Price: $54.85

Buy Details

Availability: In-Stock Item
Item #: 31875 -

Reproduction steering column to steering box coupler, also known as a 'rag' joint. Used on 1967 - 1970 Cougar tilt columns, differs greatly from the fixed column version in that is has a "D" shaped fitting on the column side. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

$0 Price: $109.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0066 -

Steering column to steering box coupler, also known as a 'rag' joint. Used on 1967 1968 1969 1970 Cougar tilt columns, differs greatly from the fixed column version in that is has a "D" shaped fitting on the column side. Good used condition, supplied with one, 12 point attaching bolt. You will need to reuse your existing 12 point bolt for the other end or purchase a second one. *NOTE* WCCC services all FoMoCo tilt and tilt-tilt away steering columns 1967-1979. Our shop rate for this service is...

$0 Price: $10.95

Buy Details

Availability: In-Stock Item
Item #: 30117 -

Reproduction black extruded plastic shield, or rain gutter for the voltage regulator on any 1969-70 Mercury Cougar or Ford Mustang. Replaces Ford part number C9ZZ-10A506-A.

$0 Price: $19.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18902 -

Used black extruded plastic shield, or rain gutter for the voltage regulator on any 1969-70 Mercury Cougar or Ford Mustang. Ford part number C9ZZ-10A506-A.

$0 Price: $27.64

Buy Details

Availability: In-Stock Item
Item #: 26227 -

Good fit, includes all hardware shown. We've found that when using our reproduction drop down bracket (for those with headers), the bushings in this kit will rip and tear through the oversized hole, so you can also purchase the pair of the premium polyurethane bushings and the issue will go away. Otherwise you can go with our premium version boot kit of you need internal parts for the cylinder. Replaces Ford Part #: C6OZ-3C651-A ...

$0 Price: $25.00

Buy Details

Availability: Out of Stock
Item #: 33224 -

New old stock power steering ram cylinder boot, rubber boot only. Fits all 1967-70 Mercury Cougar and Ford Mustang. Replaces Ford Part #: C3AZ-3C651-A.

$139.85 Price: $154.55

Buy Details

Availability: In-Stock Item
Item #: 41992 -

This new reproduction power steering ram cylinder is good quality with almost no warranty claims. However, When you go to put your cotter pin in the castle nut you will often find it does not align perfectly which means you may have to drill it for a perfect fit. Keep in mind we will pay $30 in in-store credit for a clean original used ram cylinder so don't throw them away! RAM BOOT SOLD SEPARATELY. Replaces Ford Part #: C3DZ-3A540-A or C7ZZ-3A540-A. ...

$0 Price: $137.88

Buy Details

Availability: In-Stock Item
Item #: 25932 -

This an original, rebuilt power steering slave / ram cylinder. It has not had a cosmetic restoration so it will show external dings, scrapes and general wear associated with a 50 year old part located on the bottom of a car. If you buy our reproduction ram do not throw away your core used ram as we often can give in store credit for the part. RAM DUST BOOT SOLD SEPARATELY.Replaces Ford Part #: C7ZZ-3A540-A.

$0 Price: $69.15

Buy Details

Availability: In-Stock Item
Item #: 32324 -

Quality complete rebuild kit, includes all hardware shown. Premium flexible rubber boot that has vent holes, boot for elbow, and all hardware designated by an experienced rebuilder for completeness. This is the best known kit on the market.

$0 Price: $14.55

Buy Details

Availability: In-Stock Item
Item #: 10661 -

Reproduction driver side (left hand) rear apron extension for Mercury Cougar and Ford Mustang.

$0 Price: $13.25

Buy Details

Availability: In-Stock Item
Item #: 10662 -

Reproduction passenger side (right hand) rear apron extension for Mercury Cougar and Ford Mustang.

$0 Price: $41.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32081 -

Passenger side chassis bumper bracket for the rear axle. Passenger side as removed from a 1967-73 Mercury Cougar. Good condition bracket, road tested, but not salt road tested. Ships as shown, cut with generous margins around the original bracket.

$0 Price: $41.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32080 -

Driver side chassis bumper bracket for the rear axle. Passenger side as removed from a 1967-73 Mercury Cougar. Good condition bracket, road tested, but not salt road tested. Ships as shown, cut with generous margins around the original bracket.

$0 Price: $7.15

Buy Details

Availability: In-Stock Item
Item #: 26596 -

Reproduction rear axle outer bumper for the Mercury Cougar or Ford Mustang. These units mount on frame rail, are push in and two are required per car. Sold as a pair. Replaces Ford part # C6AZ-4730.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25436 -

This 1 degree wedge properly sets the pinion angle for the drive shaft.The Mercury Parts Catalog states that this part is installed "As Required".Orientation: Narrow end towards the front of the car.

$0 Price: $27.86

Buy Details

Availability: Out of Stock
Item #: 25437 -

This 1.5 degree wedge properly sets the pinion angle for the drive shaft.The Mercury Parts Catalog states that this part is installed "As Required".Sold individually, two required per vehicle.Orientation: Narrow end towards the front of the car.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25438 -

This 2 degree wedge properly sets the pinion angle for the drive shaft.The Mercury Parts Catalog states that this part is installed "As Required".Orientation: Narrow end towards the front of the car.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24182 -

This 3 degree wedge properly sets the pinion angle for the drive shaft. This is a Cougar specific part which is needed due to the longer than normal rear leaf spring length. There are other wedges, but we seldom see them. This 3 degree marked wedge is the most prolific one. Feel secure in using these as a replacement.  Sold individually, two required per vehicle. Orientation: Narrow end towards the front of the car.

$0 Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24205 -

These are bolted to the rear frame rails and were used to tie the car down to the transporter for the journey from the factory to the dealer. The dealer was supposed to remove them and return them for a credit as instructed by the dealer. Notice the sticker on the rear license plate frame (decal is available in the decal section)? Many sets slipped through as the dealers often forgot or did not deem the small credit back worth their effort to remove. These are great for transporting your car...

$0 Price: $28.89

Buy Details

Availability: In-Stock Item
Item #: 41109 -

Reproduction Rear Bumper Guard Bolts & U Nuts for the 1968 Mercury Cougar 

MSRP:$35.00
$35.00 Price: $26.45

Buy Details

Availability: In-Stock Item
Item #: 26074 -

This is very close to being an exact reproduction. Only two things differ, the upper lip on the bezel is different in that the originals had a smaller lip on the top and this reproduction is the same on all four sides. The second difference is that the contour of the upper edge of the tray itself is not as crisp as the original and the catch has no roller but what an improvement over your rusted filthy unit! Nobody is ever going to notice but since I can see a difference when I put side by...

$0 Price: $29.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31575 -

Used rear console support bracket for the 70 Cougar or Mustang. Mounts under the leading edge of the storage compartment under the console.NOTE - 69 and 70 used different brackets