Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3793-3840 of 13397
$0 Price: $64.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30574 -

This assembly is spot welded to the fender skin. 1969 and 1970 front fender structures are different, this is a passenger side 1970 Mercury Cougar part. Sometimes this area will be damaged in a collision but the skin will still be fine. Due to the rarity of good fenders and the costly shipping you may want to consider repairing your fender as opposed to buying another if this is all you need.

MSRP:$219.99
$219.99 Price: $178.07

Buy Details

Availability: In-Stock Item
Item #: 10539 -

Reproduction full one piece front frame rail for the driver side (left hand) of the Mercury Cougar or Ford Mustang. Replaces Ford Part #: C7ZZ-6510219-B.Here's our little film to help you fortify your flexxy feline!

MSRP:$219.99
$219.99 Price: $198.35

Buy Details

Availability: In-Stock Item
Item #: 10540 -

FULL inner and outer passenger side (right hand) reproduction one piece frame rail for the Mercury Cougar or Ford Mustang. Replaces Ford Part #: C7ZZ-6510218-B.Here's our little film to help you fortify your flexxy feline!

$0 Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 41631 -

Reproduction driver side front inner apron for both the Mercury Cougar and Ford Mustang.Here's a little film to help you fortify your flexxy feline!

$0 Price: $54.55

Buy Details

Availability: In-Stock Item
Item #: 41684 -

Reproduction driver side (left hand) front inner apron for Mercury Cougar and Ford Mustang.Here's a little film to help you fortify your flexxy feline!

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 19698 -

Reproduction passenger side (right hand) front inner apron for Mercury Cougar and Ford Mustang.

$0 Price: $46.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19058 -

Good used brace that may be lightly rusted but not ripped, but will almost always show minor repairs. This part was straightened in a vise prior to taking this picture. At this price we do not sell mangled junk, but after 40 years it is rare to find one that has never been bumped. Ford master part # C7WY-13B135-A.

$0 Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24666 -

Attaches to the lower front portion of the front fender. Good used brace that may be lightly rusted but not ripped, but will almost always show minor repairs. Fits passenger and driver side. Most often they will have the J-nut still installed on both ends.Ford master part # C9WY-16B134-A.

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19669 -

Good used Western part that is not bent or heavily rusted and the left is the same as right. Ford master part # D1WY-16B134-A.

$0 Price: $3.35

Buy Details

Availability: In-Stock Item
Item #: 26642 -

Front Parking Light To Valance Pads are sold as a pair. Fits the 67 and 68 Cougar or 65 and 66 Mustang. Replaces Ford part #: C5ZZ-13217.

$0 Price: $146.18

Buy Details

Availability: In-Stock Item
Item #: 15046 -

Early production brake lines were routed 'over' the steering column.

$0 Price: $30.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31130 -

Looped weld in retainer for the rear seat installation on any 1967-70 Mercury Cougar. This is the front bracket that holds in the rear seat and was used on both coupes and convertibles. We cut out a section of the floor under the rear seat as shown. Make good measurements prior to removal of your old brackets. We think that the Ford number is C5AZ-6263370-B, but we have not been able to verify this for certain. For sure that basic Ford part number is 63370. ...

$0 Price: $30.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33386 -

Hook bracket weld in retainer for the rear seat installation on any 1971-73 Mercury Cougar. This is the front bracket that holds in the rear seat and was used on both coupes and convertibles. Sold individually, two required per car. We cut out a section of the floor under the rear seat as shown. Make good measurements prior to removal of your old brackets.  The Ford number is C9AZ-6263370-A.

$0 Price: $170.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1241 -

This is the very best we can offer. No cracks in the plastic holster, good color and no fraying on the webbing. NOTE: Front retractors are not side specific for all years 67-73, and are good for Cougar AND Mustang applications.Also, the difference between the standard and deluxe versions are the end of the buckle, the standard is rounded and the deluxe is ridged. Check out our video "All about seat belts" below. ...

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1242 -

This is a fully functional grade "B" retractor that will have a small crack in the plastic "holster" and may show very slight pitting on chrome. Driver quality, ready to plug and play. NOTE: Front retractors are same for left and right, and are good for all 67-73 Cougar AND Mustang applications. Also, the difference between the standard and deluxe versions are the end of the buckle, the standard is rounded and the deluxe is ridged.  Check out our video "All about seat belts" below. ...

$0 Price: $170.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1238 -

This is the very best we can offer. No cracks in the plastic holster, good color and no fraying on the webbing. NOTE: Front retractors are not side specific for all years 67-73, and are good for Cougar AND Mustang applications.Also, the difference between the standard and deluxe versions are the end of the buckle, the standard is rounded and the deluxe is ridged. Check out our video "All about seat belts" below. ...

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1239 -

This is a fully functional grade "B" retractor that will have a small crack in the plastic "holster" and may show very slight pitting on chrome. Driver quality, ready to plug and play. NOTE: Front retractors are same for left and right, and are good for all 67-73 Cougar AND Mustang applications. Also, the difference between the standard and deluxe versions are the end of the buckle, the standard is rounded and the deluxe is ridged. Check out this video ...

$0 Price: $199.85

Buy Details

Availability: Out of Stock
Item #: 33227 -

New Old Stock. This part is located in the right front corner of the panel and has to be rotated inward to remove it from the guide rail so the panel cannot be removed. Imprinted on the plastic portion of the part is a Golde part number 100 414 645. Ford part number C8WY-65502L08-A

$0 Price: $169.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30481 -

This part is located in the right front corner of the panel and has to be rotated inward to remove it from the guide rail so the panel cannot be removed. Imprinted on the plastic portion of the part is a Golde part number 100 414 645. Ford part number C8WY-65502L08-A

$0 Price: $97.55

Buy Details

Availability: In-Stock Item
Item #: 14687 -

This intermediate style Carbon Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for all 1972-73 Mercury Cougars. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped without bending it over,...

$0 Price: $76.28

Buy Details

Availability: In-Stock Item
Item #: 14688 -

This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for all 1972-73 Mercury Cougars. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped without bending it over,...

$0 Price: $51.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 26037 -

For power or manual drum brake Cougars. Late production brake lines were routed under the steering column. This intermediate style Carbon Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Late1967 Mercury Cougars without rear proportioning valve. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for...

$0 Price: $105.65

Buy Details

Availability: In-Stock Item
Item #: 26036 -

For power or manual drum brake Cougars. Late production brake lines were routed under the steering column. This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Late 1967 Mercury Cougars without rear proportioning valves. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back....

$0 Price: $97.55

Buy Details

Availability: In-Stock Item
Item #: 26174 -

This intermediate style Carbon Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for all 1971 Mercury Cougars. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped without bending it over, carefully...

$0 Price: $97.55

Buy Details

Availability: In-Stock Item
Item #: 14685 -

72 - 73 Mercury Cougar and Ford Mustang Front Drum Intermediate Brake Line made of OE-style steel. Intermediate Brake Lines are the lines running from the front of the car to the back feeding your rear brakes. These lines will run along your chassis all the way back to the rear brake drop hose. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously. These mild steel lines are Galphan coated for added protection. ...

$0 Price: $187.93

Buy Details

Availability: In-Stock Item
Item #: 14686 -

This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for all 1972-73 Mercury Cougars. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped without bending it over,...

$0 Price: $97.55

Buy Details

Availability: In-Stock Item
Item #: 26035 -

For power or manual drum brake Cougars. Early production brake lines were routed 'over' the steering column. This is a one piece brake line. This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Early 1967 Mercury Cougars with front drums or without rear proportioning valve. Application does not change if the front is drum or disc in the...

$0 Price: $135.25

Buy Details

Availability: In-Stock Item
Item #: 26032 -

This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for all 1971 Mercury Cougars. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped without bending it over,...

$0 Price: $65.05

Buy Details

Availability: In-Stock Item
Item #: 26034 -

Early production brake lines were routed 'over' the steering column. This is a one piece brake line. This intermediate style Carbon Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Early 1967 Mercury Cougars with front drums or without rear proportioning valve. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in...

$0 Price: $129.95

Buy Details

Availability: In-Stock Item
Item #: 26173 -

This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for all 1971 Mercury Cougars. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped without bending it over,...

$0 Price: $19.55

Buy Details

Availability: In-Stock Item
Item #: 12896 -

Reproduction 22" pigtail for the 67-69 front turn signal wiring harness. Please Note: The Cougars are wired differently than some Mustangs. On some Mustangs the brown wire goes to a male plug.   This plug is a reproduction of the Cougar plug. Here is an example from the reproduction tail light we sell showing the difference: For installation on a Cougar, match up: Black Wire Black Wire Light Blue Wire Light Blue / Off White Wire Brown Wire Brown Wire ...

$0 Price: $97.97

Buy Details

Availability: In-Stock Item
Item #: 41844 -

***WARNING*** Plugging these directly into a Cougar wiring harness without correctly re-wiring in the pigtails may fry your wiring harness! Reproduction driver side (left hand) and passenger side (right hand) front turn signal / parking light assemblies for the Ford Mustang. The plug is not correct for the Mercury Cougar's wiring harness and will need to be changed to work properly. However, this is an easy straightforward process which we lay out below. Plus you can save a good amount of that...

$0 Price: $13.18

Buy Details

Availability: In-Stock Item
Item #: 41910 -

Stamped steel and and zinc plated to prevent rust. Fits behind the parking lamps, sold individually. Replaces Ford part #: C5ZZ-13207-B.

$0 Price: $8.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31701 -

Used driver side parking light / turn signal retainer. Ford part #: C5ZZ-13207-B.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

$0 Price: $10.89

Buy Details

Availability: In-Stock Item
Item #: 41923 -

Stamped steel and and zinc plated to prevent rust. Fits behind the parking lamps, sold individually. Replaces Ford part # C5ZZ-13206-B.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

$0 Price: $8.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31700 -

Used passenger side parking light / front turn signal retainer. Ford part # C5ZZ-13206-B.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

$0 Price: $22.86

Buy Details

Availability: In-Stock Item
Item #: 25679 -

Stamped steel and and zinc plated to prevent rust. Fits behind the parking lamps, Sold as a pair. Replaces Ford part #: C5ZZ-13206-B and C5ZZ-13207-B.

$0 Price: $154.89

Buy Details

Availability: In-Stock Item
Item #: 13822 -

Reproduction driver side (left hand) and passenger side (right hand) front turn signal / parking light assemblies for the Mercury Cougar. These units come with the correct amber bulbs, clear lenses and have the original working wiring pigtails already spliced in. These are sold as a pair only. Keep in mind there were slight variations between 1967 and 1968 (a simple A clip on the wiring harness). We no longer carry both versions, we use the same wiring on both years. If you would like to...

MSRP:$6.00
$6.00 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 11776 -

Made from original Ford tooling, perfect in every detail down to the FoMoCo logo. Sold individually, two required per car. Clear lens for 1967-68 Mercury Cougar, Amber lens for Mustang. Screws sold separately, you can find them here. Replaces Ford part # C7WY-13208-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential...

$0 Price: $10.35

Buy Details

Availability: In-Stock Item
Item #: 41121 -

Reproduction Front Valance Bolts & U Nuts for the 1968 Mercury Cougar 

$0 Price: $45.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25153 -

D0WY-9A091-A Front evaporative vapor separator, mounts in the drivers side trunk well. *Note - This is only a small part of the 9B004 assembly.

$0 Price: $192.31

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11486 -

Reproduction green tinted windshield that features a blue tinted band a crossed the top of the windshield. Not only will this unit look great, it will fit perfectly as well. Planning on installing the glass yourself? We also sell the glass to window channel weld. BECAUSE OF THE HIGH COST OF SHIPPING, ALL WINDSHIELDS ARE AVAILABLE FOR DROP SHIP OR LOCAL PICK-UP ONLY. Our website is currently unable to accurately calculate truck freight costs, so don't be deceived by the shipping rate displayed....

$0 Price: $58.25

Buy Details

Availability: In-Stock Item
Item #: 41054 -

Reproduction brake line clamp kit for the Mercury Cougar or Ford Mustang.

$0 Price: $4.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33790 -

Warning lens indicating "FUEL" and "PARK", attaches to the FUEL / AMPS gauge bezel on any 1970 Mercury Cougar XR7. These are red back lit warnings to let you know that your fuel is low or the parking brake is on. 1970 lens has white lettering and is visible when the warning light is not lit. Ford part number D0WY-10A936, casting number D0WF-10A936.

$0 Price: $75.02

Buy Details

Availability: Out of Stock
Item #: 13693 -

Used factory installed vented fuel, or gas cap as installed on 1967-69 Mercury Cougar 1970 cars without California emissions. Also fits 1969-70 Shelby Mustang. In 1970 California required a non-vented fuel cap.We stock these in limited quantities, and will have an intact paper gasket. Correct "VENTED" embossed and has the "S" stamped onto the center rivet. Price is established by demand, and these normally are only needed for very high level restorations or strict concours judging...