Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 12721-12768 of 13397
$0 Price: $213.17

Buy Details

Availability: Out of Stock
Item #: 32335 -

New old stock tilt / tilt away steering column lock relay for the Mercury Cougar or Ford Mustang. Keep in mind we have a reproduction substitution for this part. This unit can be identified with the bend in the bracket compared to the 1967 relay which is straight.  Ford part # C8ZA-3E553-A. There is an active thread on the Classic Cougar Community Forum discussing tilt columns and trouble shooting. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.co...

$0 Price: $17.87

Buy Details

Availability: Out of Stock
Item #: 19410 -

This three part clip was used on all four versions of the 1969 - 1970 remote mirror to keep the door glass from interfering with the cable.

$0 Price: $292.50

Buy Details

Availability: Out of Stock
Item #: 32900 -

New old stock Ford accessory cable trunk popper. Fits late 1967 - 1973 Mercury Cougar and other Ford products. Lever release, complete kit, NOS Ford. Detailed instructions included.  Ford part number C7AZ-62432A00-A. *Note - All 1967, and most 1968 trunk lids will not have a large enough access opening in the under side structure to allow the trunk latch to be inserted. 

$0 Price: $179.85

Buy Details

Availability: Out of Stock
Item #: 32856 -

New old stock Ford accessory electric trunk popper. Fits late 1968 - 1973 Mercury Cougar and other Ford products. Electric push button release, complete kit, NOS Ford. Detailed instructions included.  Ford part number C9AZ-54432A00-A. *Note - All 1967, and most 1968 trunk lids will not have a large enough access opening in the under side structure to allow the trunk latch to be inserted. 

$0 Price: $65.00

Buy Details

Availability: Out of Stock
Item #: 33229 -

Ford OEM kit for rebuilding your power steering control valve on any 1962-70 Ford or Mercury. All parts in photo are included. We also have the complete rebuild kit available.  NOS power steering control valve repair kit.  Ford part number C2AZ-3A553-A.

$0 Price: $76.85

Buy Details

Availability: Out of Stock
Item #: 19187 -

Rare find in NOS form! Used only on the 1967 and 1968 Mercury.Ford part number C7AZ-17632-A

$0 Price: $44.87

Buy Details

Availability: Out of Stock
Item #: 20425 -

Good used metal strip that fastens the weatherstrip to the bottom side of the header bow. Keep in mind we have (almost) every single used part related to the 69-73 Convertible Cougar and convertible Ford Mustang / Shelby in stock at all times.

$0 Price: $48.87

Buy Details

Availability: Out of Stock
Item #: 16234 -

Used rear leaf spring retainer for 1967 -73 Mercury Cougar with competition handling or GT suspensions. Additionally it fits 1966-71 Mercury Comet / Montego / Cycolne, 1966-71 Ford Fairlane / Torino, all with HD or GT suspensions. Identified with a stamped number "2" on the top. The inside height is 1-29/32 or 1.91 inches. Sold individually, one for each side for a total of 2 per car. Bead blasted for pictures, most will ship 'as removed'. This suspension part never came painted, there will be...

$0 Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 10800 -

Trunk lock cylinder retainer for all 1973 Mercury Cougars, different retaining configuration from 1971-72 Cougars. The MPC does not show the part number but it is likely D3WY-6543629-A. Mustangs used a different retainer with a Mustang part number.

$0 Price: $139.86

Buy Details

Availability: Out of Stock
Item #: 19348 -

This is the stainless steel trim for the front of the boot that attaches to the back side of the back seat in a 1969 or 1970 Cougar and Stang. This is a very hard part to come by in good shape. Many times body shops will loose this piece while replacing the top. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our...

$0 Price: $13.86

Buy Details

Availability: Out of Stock
Item #: 10436 -

Larger sized retainer that screws to upper front lip near the quarter glass on all 1969-70 Mercury Cougar hardtops and 1970 Ford Mustang coupes. Ford lists this part as: Retainer - quarter trim panel rear. We see these sometimes installed in the front position at the top of the interior quarter panel next to the window glass, mostly the front position is empty or the factory installed two of the smaller retainers. This retainer helps the top section of the soft trim panels from rattling. The...

$0 Price: $219.85

Buy Details

Availability: Out of Stock
Item #: 31473 -

Very hard to find used wire access retainer for the 67 Cougar or Mustang Tilt column. The fixed column uses a different size retainer and will not interchange. Ford part number C7ZZ-9D753-EThe Ford diagram lists the part number as 9D753

$0 Price: $69.75

Buy Details

Availability: Out of Stock
Item #: 32366 -

NOS retainer / friction clips that replace broken injected plastic shaft retainers on fixed or tilt steering collapsible columns on most FoMoCo products starting in 1968 and through the 70's. These installs on the upper piece of what Ford called the Steering Column Shaft Assembly, also known as the inner steering column collapsible shaft.  The Steering Column Shaft Assembly is the 2 piece shaft that connects the steering wheel to the rag joint. The upper piece of this shaft...

$0 Price: $9.86

Buy Details

Availability: Out of Stock
Item #: 32507 -

Used, with scratches and pits, suitable for every day driver or restoring.

$0 Price: $0.99

Buy Details

Availability: Out of Stock
Item #: 25495 -

D2AZ-14A163-K Black plastic ring that barely fits over the PCV hose. Ring end locks into the D1AZ-6788-A hose bracket. Fits all 1972-73 351 engines, both 2V and 4V engines. This retaining ring came from Ford's electrical section.

$0 Price: $391.75

Buy Details

Availability: Out of Stock
Item #: 41510 -

Reproduction, non functional "dummy" correct looking rev limiter. Also referred to as an electronic engine governor or RPM limiter. These were used on 1970 428 Cobra Jet engines when the car was equipped with a manual transmission. Replaces Ford part number DOZF-12450-A.

$0 Price: $391.75

Buy Details

Availability: Out of Stock
Item #: 41512 -

Reproduction, non functional "dummy" correct looking rev limiter. Also referred to as an electronic engine governor or RPM limiter. These were used on 1970 BOSS 302 engines. Replaces Ford part number DOZF-12450-B.Note that Ford used a solid state voltage regulator that uses the same case starting in 1966 that has been found on Trucks, Thunderbirds, Galaxies and other full size cars. These units have been known to have engineering numbers of C6AF-10316-A, C6TF-10316-A, and D2HF-10316-AA...

$0 Price: $28.89

Buy Details

Availability: Out of Stock
Item #: 14149 -

If your original is pitted or has come apart this will be a clean, crack free used replacement that will easily snap in place. We have a reproduction, but the finish is rougher, as shown in the comparison photo. There were originally two versions of this switch: the one shown with both round contact points in plastic, and another which had one in metal.

$0 Price: $9.86

Buy Details

Availability: Out of Stock
Item #: 30260 -

Inner rectangular clip to hold on the rocker panel moulding on a 1967 or 1968 Ford Mustang or Mercury Cougar. Sold Individually. You can find the reproductions here.Ford Part number C7ZZ-6510182-A

$0 Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 31459 -

Used Rod for the bell crank accelerator for 1967-68 Mercury Cougar and Ford Mustang with speed control. The Rod fits in the tubular Link. It attaches to the Trunnion. Ford part number C7ZZ-9D774-A.

$0 Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 31484 -

Used Rod for the bell crank accelerator for 1969 Mercury Cougar and Ford Mustang with speed control. The Rod fits between the Servo and Bell Crank. Ford number may be C9ZZ-9D774-A, just a guess.Ford part number 9D774.

$0 Price: $69.89

Buy Details

Availability: Out of Stock
Item #: 31223 -

This rod was used on the Bendix brand booster (crimped together case). It measures 5 3/4" long. Used on many Ford products including Torino, Cyclone, Ranchero, Cobra, Fairlane and others. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot...

$0 Price: $105.89

Buy Details

Availability: Out of Stock
Item #: 24279 -

This carries a 1967 part number but is in fact a 1968 door as evidenced by the wide pull knob. The small 1967 knob was small which not only was hard to grab onto but would bend the lower portion of the door from stress. Not used on XR7 consoles.Need some help getting that old unit out? Here’s some guidance from our buddy Randy Goodling.All 67-68 standard consoles had a storage compartment. The slide up doors are different between the 2 years due to the handle being different. The 67-68 Mustang...

$0 Price: $10.95

Buy Details

Availability: Out of Stock
Item #: 14-1000 -

New Permatex RTV gasket dissolver, good for all makes, models, and years. Use this stuff when you want to remove any remnants of those old worn out silicone gaskets made with any of the common gasket makers. Handy item to have on hand so you dont have to keep using your putty knife or screwdriver! 

$0 Price: $7.88

Buy Details

Availability: Out of Stock
Item #: 15-0206 -

Used rubber bumper for the tilt column. 70 - 73 tilt columns require 3 bumpers, one on the lower and two on the upper knuckles. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $18.25

Buy Details

Availability: Out of Stock, On Order
Item #: 27324 -

Companion reproduction insulation for our premium 1969-70 Mercury Cougar sail panels. These were created by a Cougar enthusiast for Cougar enthusiasts. Copied from an original 1969 Cougar Eliminator. Sold in pairs, originally held up with a bit of spray adhesive glue. Same thickness heavy felt as originals.

MSRP:$59.99
$59.99 Price: $59.56

Buy Details

Availability: Out of Stock
Item #: 10980 -

Reproduction rear interior sail panels for the 1970 Mercury Cougar standard model without lights. Hardboard backer board covered in textured vinyl. Original panels were made of textured paper. Will also work on 1969 except without the embossed border. Sold in pairs, 1970 standard in black. Also available in white, which can be painted. See related items for reproduction insulation.

$0 Price: $59.56

Buy Details

Availability: Out of Stock
Item #: 10981 -

Reproduction rear interior sail panels for the 1970 Mercury Cougar standard model without lights. Hardboard backer board covered in textured vinyl. Original panels were made of textured paper. Will also work on 1969 except without the embossed border. Sold in pairs, 1970 standard in white, which can be painted. Also available in black. See related items for reproduction insulation.

$0 Price: $77.35

Buy Details

Availability: Out of Stock, On Order
Item #: 11000 -

Reproduction white rear interior sail panels for 1970 Mercury Cougar XR7 and standard models with courtesy light provision. Reproduction rear interior sail panels made from hard backer board, covered in textured white vinyl with embossed border. Original panels were made of textured paper. Metal reinforcing ring installed for courtesy lights. Several different versions of courtesy lights were used 1969-70. These allow the installation of the chromed reproduction courtesy lights which look...

$0 Price: $77.35

Buy Details

Availability: Out of Stock, On Order
Item #: 10999 -

Reproduction rear interior sail panels for 1970 Mercury Cougar XR7 and standard models with courtesy light provision. Reproduction rear interior sail panels made from hard backer board, covered in textured black vinyl with embossed border. Original panels were made of textured paper. Metal reinforcing ring installed for courtesy lights. Several different versions of courtesy lights were used 1969-70. These allow the installation of the chromed reproduction courtesy lights which look great...

$0 Price: $181.85

Buy Details

Availability: Out of Stock
Item #: 12298 -

Very Rare original flyer for those interested in over the counter speed upgrades for their Cougar. This is the smaller version of "How To Sharpen A Cougar's Claws". Ford part numbers included on the order form: S7WK-6B068-A - S1CR-6250-6 - S7WK-6B068-B - S1CR-6250-A - S7WK-9428-A - S7WK-6B068-C - C4DZ-12050-A - C3DZ-7A537-A - S7WK-16612-A - S7WK-1007-A - S7WK-3600-A - S7WK-17360-A - C5RZ-17696-A - S7WK-6A547-A - S7WK-9423 - S1CK-6052 - S7WK-6675-A - S7WK-6003-AFun fact: when this was sent out...

$0 Price: $219.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20287 -

Uncommon jack as identified by the coarse threads. This version was made by a specific supplier AUSCO or Auto Specialties Manufacturing Company. AUSCO supplied jacks to Ford until 1970.See the link for the Ford jack research done by Marcus Anghel - Anghel Restorations

$0 Price: $189.85

Buy Details

Availability: Out of Stock
Item #: 25416 -

Original scissors jack. We save the working ones that come to our yard. Hinge points should get little oil or a quick spray of WD-40. Wipe down the residual grease and oil and stow it in the trunk again! Notice the correct placement of the instruction decal. That's the tip of the day! *NOTE* There are multiple versions of this jack that differ in the area that makes contact to the rocker and the thread pitch. We will be sorting out those differences and posting our findings here soon. ...

$0 Price: $0.77

Buy Details

Availability: Out of Stock
Item #: 30642 -

Sold individually, original glove box cable screw with shoulder. For any 1967-70 Mercury Cougar or Ford Mustang. Probably many other Ford and Mercury cars also.Ford part number 379202-S2.

$0 Price: $0.90

Buy Details

Availability: Out of Stock
Item #: 20655 -

This 1/2" tall unique little screw was used on several different trim parts on the early Mercury Cougars. In 1967 - 1968 there were eight per wheel lip moulding, two per fender extension moulding, two per center grille moulding and five per hood lip moulding for a total of 50 screws. In 1969-1973 they were used on the wheel lips mouldings. The 1971 - 1973 hood lip mouldings used the same screw but it was 5/8" tall.

$0 Price: $11.57

Buy Details

Availability: Out of Stock
Item #: 15-0059 -

Used in the latter part of 1967 and all of 1968 and 1969 to fasten the upper column cover to the column. Early 1967 used a chrome version of this screw.

$0 Price: $0.85

Buy Details

Availability: Out of Stock
Item #: 10745 -

Reproduction Phillips head screw that is used in a variety of applications on the Mercury Cougar or Ford Mustang. This phosphate & oil (gray-black) colored unit features a wide flat head and is used for attaching the stainless roof side weatherstrip rail. However, it has other interior applications as well.  Sold individually.  24 required per car, set of 24 also available. ...

$0 Price: $25.85

Buy Details

Availability: Out of Stock, On Order
Item #: 11393 -

Reproduction door to window seal for the early 1967 Mercury Cougar and Ford Mustang. These are copies of ones for use before 12/14/1966. Install at the rear of the door at the edge of the door window. Replaces Ford part #: C7ZZ-6520558-B and C7ZZ-6520559-A. Sold as a pair. This part is often listed incorrectly under C7ZZ-6520588.

$0 Price: $54.86

Buy Details

Availability: Out of Stock
Item #: 25836 -

C6OZ-7A533-C. Clutch Pedal Rod To Firewall Seal. Much better than repro. Also fits 1966 Mustang / Fairlane / Comet and others.

$0 Price: $55.04

Buy Details

Availability: Out of Stock
Item #: 13074 -

NOS lower inside door seal for any 1967-68 Mercury Cougar or Ford Mustang. No wrapper, this is not a reproduced item. Not very many Cougars or Mustangs came with this seal, we think it may have been for wind noise? Unknown. These are pre-drilled for mounting, no hardware included.Replaces Ford part number C7WY-6520272-A.

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 31728 -

It is not often we get perfect used rubber, but nothing fits like OEM!The Engineering number on the bottom of the driver side reads C7ZB-6521449-ACheck out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 31729 -

It is not often we get perfect used but nothing fits like OEM!The Engineering number on the bottom of the passenger side reads C7ZB-6521448-ACheck out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration

$0 Price: $16.45

Buy Details

Availability: Out of Stock, On Order
Item #: 25927 -

Kit includes all repair parts necessary to refurbish leaking cylinder/piston rod seal area. Replaces Ford Part #: C1AZ-3A764-A.

$0 Price: $89.87

Buy Details

Availability: Out of Stock
Item #: 10821 -

Driver side seat back release assembly, can me used for a conversion of 1970 high-backed seat backs for use in 1969 Mercury Cougar Eliminator and Ford Mustang Mach 1. This assembly has the release lever mounted nearly at shoulder level, factory 1970 high backs have the latch release at the hinge. This is a sneaky way to 'create' the factory 1969 high backed seats from 1970 seat backs. Comes with all hardware as shown. See picture for locating the three holes required for installation in a 1970...

$0 Price: $64.89

Buy Details

Availability: Out of Stock
Item #: 14-1016 -

Hard to find without being faded, frayed or rusted buckle. Rarely, if ever will our used shoulder belts look this pristine as they are prone to sun fade. Sold individually, 2 required per car, hardware sold separate. Contact us for colors other than black. Check out our video "All about seat belts" below. ...