Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3937-3984 of 13397
$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25378 -

We prefer local pick-up only on these used 20 gallon fuel / gas tanks as we cannot ship anything that smells like fuel.

$0 Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25155 -

D0WY-9A195-A Main evaporative assembly that mounts directly on top of the evaporative 1970 fuel tank. *Note - This is only a small part of the 9B004 assembly.

$0 Price: $182.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11743 -

9B004  Assembly consists of D0WY-9A195-A tank connector assembly, D0WY-9A091-A front vent expansion separator, DOWY-9A091-B rear vent expansion separator, D0WY-9A188-A & D0WY-9A188-B & D0WY-9A225-A mounting brackets, and all of the factory lines that connect them. 1970 Cougar part only guys, probably would work in a 1970 Mustang, but the Mustang has all different part numbers.

$0 Price: $19.85

Buy Details

Availability: In-Stock Item
Item #: 41741 -

If you find that this tube has too small of fittings for your OEM 4150 / 4160 Holley carburetor than what has happened is that someone has replaced your transfer tube and fittings with one of the after-market kits available at speed shops. This is the ONLY correct transfer tube for a Cougar equipped with a Holley from 1967 - 1970. Replaces Ford part # C9AZ-9H576-A.

$0 Price: $57.35

Buy Details

Availability: In-Stock Item
Item #: 31328 -

Ford called this part the fuel vapor separator. It mounts to the top of the fuel tank. This is part of the emissions control smog system, the fuel vapors that are collected in the charcoal canister are returned through a hose to this device into the fuel tank. Applications for this part include: 1971-73 Mercury Cougar and Ford Mustang, 1971-72 Pinto and Bobcat, 1971-72 Maverick and Comet, 1971 Thunderbird and Lincoln MKIII, and 1971-73 Ford / Mercury full sized cars. Starting about 1973, this...

$0 Price: $52.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10353 -

Ford called this part the fuel vapor separator. It mounts to the top of the fuel tank. This is part of the emissions control smog system, the fuel vapors that are collected in the charcoal canister are returned through a hose to this device into the fuel tank. Applications for this part include: 1971-73 Mercury Cougar and Ford Mustang, 1971-72 Pinto and Bobcat, 1971-72 Maverick and Comet, 1971 Thunderbird and Lincoln MKIII, and 1971-73 Ford / Mercury full sized cars. Starting about 1973, this...

$0 Price: $125.55

Buy Details

Availability: In-Stock Item
Item #: 15480 -

This is our reproduction, uncut, driver side (left hand), long, front and rear floor pan for your Mercury Cougar convertible.

$0 Price: $125.55

Buy Details

Availability: In-Stock Item
Item #: 15481 -

This is our reproduction, uncut, passenger side (right hand), long, front and rear floor pan for your Mercury Cougar convertible.

$0 Price: $99.00

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15478 -

This is a reproduction long front and rear floor pan. Will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but this will work for all years.

$0 Price: $109.67

Buy Details

Availability: In-Stock Item
Item #: 11684 -

Reproduction full length driver side floor pan. This pan is technically for 67 - 68, but will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but will work for all years. Hi, and sincerely thanks for all help I've received from WCCC during my (mega) 1968 restoration project. If everyone would be that helpful, the world would be a much better place. ;-) My car is almost ready for the road, but - as always - there...

$0 Price: $99.00

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15479 -

This is a reproduction long front and rear floor pan. Will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but this will work for all years.

$0 Price: $109.67

Buy Details

Availability: In-Stock Item
Item #: 11683 -

Reproduction full length passenger side floor pan. This pan is technically for 67 - 68, but will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but will work for all years.

$0 Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10278 -

C8OZ-14A187-A Unique 1/4"-20 bolt for attaching the fuse blocks. 69 70 71 72 73 Mercury Cougar Ford Mustang fuse panel attaching bolt. Includes "C" clip and spring as shown. "C" clip keeps the bolt in the black fuse block.

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10281 -

C6OZ-14A068-A Black Bake-O-Lite original fuse block. Grade A, no cracks or chips. Perfect for upgrading your broken fuse block that has a nice wiring harness. 67 68 Mercury Cougar Ford Mustang, additional application are 1966-67 Ford Fairlane, Ranchero, Mercury Comet fuse panel.

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10276 -

C8OZ-14A068-A Black Bake-O-Lite original fuse block. Grade A, no cracks or chips. Perfect for upgrading your broken fuse block that has a nice wiring harness. 69 70 Mercury Cougar Ford Mustang fuse panel. Sometime in the later part of 1972 Ford switched to a nearly identical brown fuse block.

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10277 -

D1ZZ-14A068-A Black Bake-O-Lite original fuse block. Grade A, no cracks or chips. Perfect for upgrading your broken fuse block that has a nice wiring harness.72 73 Mercury Cougar Ford Mustang fuse panel. We suspect that this brown colored fuse block was used towards the end of 1972 and all of 1973. Identified by the brown color, and having a 20AMP fuse 'cigar lighter and horn' fuse location.

$0 Price: $38.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10282 -

C6OZ-14A068-GRADEB Black Bake-O-Lite original fuse block. Grade B, not broken, but will have chips from prying out fuses. Perfect for upgrading your broken fuse block that has a nice wiring harness. 67 68 Mercury Cougar Ford Mustang, additional application is 1966-67 Ford Fairlane, Ranchero, Mercury Comet fuse panel.

$0 Price: $46.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10275 -

C8OZ-14A068-GRADEB Black Bake-O-Lite original fuse block. Grade B, not broken, but will have chips from prying out fuses. Perfect for upgrading your broken fuse block that has a nice wiring harness. 69 70 71 72 Mercury Cougar Ford Mustang fuse panel. Sometime in the later part of 1972 Ford switched to a nearly identical brown fuse block.

$0 Price: $46.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10280 -

D1ZZ-14A068-A GRADE B Black Bake-O-Lite original fuse block. Grade B, not broken, but will have chips from prying out fuses. Perfect for upgrading your broken fuse block that has a nice wiring harness. 72 73 Mercury Cougar Ford Mustang fuse panel. We suspect that this brown colored fuse block was used towards the end of 1972 and all of 1973. Identified by the brown color, and having a 20AMP fuse 'cigar lighter and horn' fuse location.

$0 Price: $75.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15611 -

Used fuse block / box with wiring pigtail for the under dash harness for your Mercury Cougar Standard and XR7. This fuse block has a pigtail where the individual fuse holders and wires can be removed. This is also part of the 14401 main under dash wiring harness.Ford part # C6OZ-14A068-A.

$0 Price: $42.98

Buy Details

Availability: Out of Stock
Item #: 32804 -

Reproduction Accessory wire with Buss bar for the accessory terminal found optionally on 1969-73 Mercury Cougar and Ford Mustang fuse blocks. Lead comes with factory molded style triple female connector for plugging in the various accessories such as 1969 swing away steering column, rear window defogger, speed or cruise control, etc. Wire length is just over 9 inches in length.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41226 -

This is actually the correct 2 inch screw for the 1968, as opposed to the 1 3/4 inch screw that would have come in the 67. With the added length this screw is less likely to pull out of the firewall than the 67 screw was. Fits Standard and XR7. Sold individually.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15513 -

This fusible link is a section of wire connecting the starter solenoid on one end and wiring harness that passes through the firewall to mate with the top switch wiring. Correct for power sunroof equipped Cougars. May also work for XR7 and Standard convertibles.

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 15716 -

Individual reproduction anti-rattle rubber gasket for the stainless steel accent ring used on the Mercury Cougar or Cyclone. This unit is used to keep the accent rings from rattling and driving Cougar and Cyclone owners insane. You can run your wheels without these rings, however Ford used them, so we sell'em. Sold individually.

$0 Price: $30.85

Buy Details

Availability: In-Stock Item
Item #: 26999 -

Set of 20 reproduction anti-rattle rubber gaskets for the stainless steel accent rings used on the styled steel wheels found on the Mercury Cougar or Cyclone. These units are used to keep the accent rings from rattling and driving Cougar and Cyclone owners insane. You can run your wheels without these rings, however Ford used them, so we sell'em. Set of 20

$0 Price: $3.89

Buy Details

Availability: Out of Stock
Item #: 26667 -

Reproduction antenna base gasket.Replaces Ford part # C5ZZ-18A813-A

MSRP:$5.00
$5.00 Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 14033 -

Reproduction antenna base gasket.Replaces Ford part #  C9WA-18298-B.

$0 Price: $20.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41219 -

Here's a good original used antenna base gasket that is unique to the 1969-70 Mercury Cougar. Replaces part # C9WA-18298-B.

$0 Price: $7.27

Buy Details

Availability: In-Stock Item
Item #: 10576 -

Gasket for sealing the 8 inch third member in most corporate Ford rear ends. Typically found in all 1967-68 Mercury Cougar and Ford Mustang with 289 or 302 engines. Exception for Mustangs with the GT option, those cars would have had 9 inch rear ends.

$0 Price: $7.85

Buy Details

Availability: Rare / NOS Part
Item #: 33325 -

New Old Stock Ford small block Ford distributor shaft to engine block gasket, made of rubber. Fits all 260, 289, 302, 351w, 351c engines. 1959-76. This is a "O" ring rubber washer. Will not fit big block FE, 360, 390, 410, 427, 428 engines. Ford part number B9TF-12143-A.

$0 Price: $4.85

Buy Details

Availability: Rare / NOS Part
Item #: 32883 -

New Old Stock Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

$0 Price: $2.65

Buy Details

Availability: In-Stock Item
Item #: 10619 -

Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

$0 Price: $24.85

Buy Details

Availability: Rare / NOS Part
Item #: 33468 -

NOS C7ZB-6522449-A Driver side small size pad or gasket for the exterior door handle. Driver side only, application 1967-68 Mercury Cougar and 1967-70 Ford Mustang as well as 1970 and newer Maverick and Comet with the early style chrome door handles.

$0 Price: $24.85

Buy Details

Availability: Rare / NOS Part
Item #: 11017 -

NOS C7ZZ-6522428-A Passenger side large size pad or gasket for the exterior door handle. Passenger side only, application 1967-68 Mercury Cougar and 1967-70 Ford Mustang as well as 1970 and newer Maverick and Comet with the early style chrome door handles.

$0 Price: $9.85

Buy Details

Availability: Rare / NOS Part
Item #: 33467 -

NOS C7ZB-6522448-A Passenger side small size pad or gasket for the exterior door handle. Passenger side only, application 1967-68 Mercury Cougar and 1967-70 Ford Mustang as well as 1970 and newer Maverick and Comet with the early style chrome door handles.

$0 Price: $5.55

Buy Details

Availability: In-Stock Item
Item #: 10076 -

Made from fuel resistant cork like original. This gasket is specific to 1967 - 1968 Cougars. We finally found the correct gasket with correct hole placement (our other version which is good for Cougar AND Mustang has five holes, so basically you would have to drill through the cork just like they did in the Dearborn and San Jose factories).Here's a good tip! Ken Stein gave us this one...Install two of these gaskets and your gas cap will not scratch your paint. Original gas caps will always...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26656 -

Made from fuel resistant cork like original.  Modeled off the Mustang \ 69 Cougar gasket which has 5 screws (67-68 Cougar only used 4 screws), but works for any 67-73 Mustang / Cougar. For 67-68 Cougar applications you will have to just screw through the cork. We can say with out a doubt, that in both Dearborn and San Jose, the factory workers did not use the pre-drilled holes when installing the fuel filler necks. We have suggested that the supplier not make them with holes. Probably...

$0 Price: $30.84

Buy Details

Availability: In-Stock Item
Item #: 16150 -

This gasket goes between the rear axle flange and the backing plate on the differential. It fits all Mustangs from 1967 - 1970.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26627 -

Door lock and trunk lock gasket as found on all 1969-73 Mercury Cougar. Gasket used to seal the lock cylinders to the exterior door on all 1967 - 1973 Mercury Cougar and Ford Mustang as well as the trunk lock gasket on all 1969-73 Mercury Cougar. It is not used for the trunk lock cylinder on the 1967 - 1968 Mercury Cougar because they uses a flip up trunk lock cover that instead uses a gasket between the covers housing and the trunk. Replaces Ford part #C7AZ-6243625.

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26639 -

This gasket is found behind the trunk lock housing, which the lock itself sits in behind the trunk lock cover plate, and forms a seal between the trunk lock housing and the trunk itself. Made of soft rubber much like the original. Replaces Ford part #: C7WY-6543625. Check out this video

$0 Price: $2.98

Buy Details

Availability: In-Stock Item
Item #: 31621 -

Gasket for mounting the oil filter adapter to any FE or Ford 360, 390, 410, 427, 428CJ engine. Name brand gasket, fits all 1967-70 Mercury Cougar or Ford Mustang with S, X, R, Q, or W code engines.