Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 4465-4512 of 13397
$59.99 Price: $131.04

Buy Details

Availability: In-Stock Item
Item #: 42177 -

The 1971 - 1973 Mercury Cougar XR7 came with Tier and standard came with Perforated headliner, so make sure you choose the correct texture. All of the colors with the exception of Dark Green and Dark Blue are available in either texture.Check out our video below showing how to install one of these bow-type headliners. This was done by a pro, but it's a job you can do yourself with some patience and basic knowledge. ...

$0 Price: $12.87

Buy Details

Availability: Out of Stock
Item #: 27305 -

Pair of used wire anchors for keeping the rear most headliner bow stationary. These are fragile wires, and prone to rusting. We try to keep them in inventory. 1969-70 anchor wires are 3-1/16 inches long. A DIY person can improvise these pretty easy, using lengths of regular wire.

$0 Price: $9.86

Buy Details

Availability: Out of Stock
Item #: 27306 -

Pair of used wire anchors for keeping the rear most headliner bow stationary. These are fragile wires, and prone to rusting. We try to keep them in inventory. 1971-73 anchor wires are 4-9/16 inches long. A DIY person can improvise these pretty easy, using lengths of regular wire. Ford part # C6AB-6352180-A.

$0 Price: $64.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27307 -

Contrary to what you might think at first glance, the support rods used in 1969 - 1970 Cougar headliners are not the same front to back. Each of the rods is bowed to a different curve. To replace a headliner and make it look right, you must keep the rods in the same order as they came out of the original headliner. 5 Rods total. Once installed in the car, each rod should be about the same distance from the roof as the other rods. WCCC marks the bows with a sharpie pen, 1 hash mark, 2 hash...

$0 Price: $64.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27308 -

Contrary to what you might think at first glance, the support rods used in 1971-73 Mercury Cougar headliners are not the same from front to back. Each of the rods is bowed to a different curve. To replace a headliner and make it look right, you must install the rods in the same order as they came out from the original locations. To help you do this, Lincoln-Mercury coded each rod with a color applied to each end. 1st. Driver Side: Pink - Passenger Side: Pink 2nd. Driver Side: Pink - Passenger...

$0 Price: $229.86

Buy Details

Availability: In-Stock Item
Item #: 31649 -

Reproduction frame used to stretch your headliner over on the interior side of your sliding sunroof panel. Since we do not have near enough of these to go around we also offer a cardboard template for purchase for those of you that would like to make your own. With the pictures we provide and the template one should be able to produce a reasonable reproduction. 

$0 Price: $239.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31980 -

Good used frame used to stretch your head liner over on the interior side of your sliding sun roof panel. The picture above is the support strip that runs through the middle At its widest points this frame measures 35 1/4" x 20 15/16" ...

$0 Price: $12.47

Buy Details

Availability: In-Stock Item
Item #: 11306 -

Nice reproduction headliner trim for 1968 Mercury Cougar standard models without padded windshield pillars. Also fits several years of Mustang. They come black, but can be painted to match your interior. Right and left steel pillar trim with mounting screws. Ford part # C5ZZ-6552136 and C5ZZ-6552137.

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 41439 -

We found that the plastic adjustment clip can break easily on these reproductions, so consider buying a good used original Ford part instead, for around the same price. Find it here.

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30320 -

Used headrest guide and retainer for the 69 Cougar or Mustang. The plastic adjustment clip doesn't break as easy as it does on the reproductions, so consider buying this good used original Ford part instead.When ordering please mention in the comments section what color you desire and we will do our best to accommodate.

$0 Price: $122.22

Buy Details

Availability: In-Stock Item
Item #: 32316 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $122.22

Buy Details

Availability: Special Order, Ships Direct from Supplier
Item #: 32310 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $122.22

Buy Details

Availability: In-Stock Item
Item #: 32317 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $122.22

Buy Details

Availability: In-Stock Item
Item #: 32313 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $122.22

Buy Details

Availability: In-Stock Item
Item #: 32312 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $122.22

Buy Details

Availability: In-Stock Item
Item #: 32318 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $122.22

Buy Details

Availability: In-Stock Item
Item #: 32314 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $122.22

Buy Details

Availability: In-Stock Item
Item #: 32311 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $122.22

Buy Details

Availability: In-Stock Item
Item #: 32315 -

Upholstery kit for covering the headrests on the 1968 Cougar. Does not include headrest hardware or foam.  Made from the same Sierra grain 32oz vinyl material as our upholstery kits. Sold as a pair.

$0 Price: $69.22

Buy Details

Availability: In-Stock Item
Item #: 19934 -

Exact OEM standards and specifications. Correct fiberglass insulation, fittings, rubber hose and S clip.

$0 Price: $49.44

Buy Details

Availability: In-Stock Item
Item #: 15260 -

Exact OEM standards and specifications. Correct fiberglass insulation, fittings, rubber hose and S clip.

$0 Price: $23.65

Buy Details

Availability: In-Stock Item
Item #: 15261 -

Exact OEM standards and specifications. Correct fiberglass insulation, fittings, rubber hose and S clip.

$0 Price: $29.15

Buy Details

Availability: In-Stock Item
Item #: 15286 -

Exact OEM standards and specificatons. Correct fiberglass insulation, fittings, rubber hose and S clip.

$0 Price: $39.55

Buy Details

Availability: In-Stock Item
Item #: 14296 -

This is the heat riser choke tube that provides heat to the choke, so the choke will open up as the motor warms up. Made out of Stainless Steel. This tube is designed to work on the 1970, 1971, 1972 & 1973 Mercury Cougar or Ford Mustang with a factory 2 Barrel Carburetor and the 351 Cleveland engine. Exact OEM standards and specifications. Correct fiberglass insulation, fittings and S clip.

$0 Price: $30.89

Buy Details

Availability: In-Stock Item
Item #: 41587 -

This is a 2 piece heat riser choke tube that provides heat to the choke, so the choke will open up as the motor warms up.  Made out of OE Steel.  This tube is designed to work on the 1970, 1971, 1972 & 1973 Mercury Cougar or Ford Mustang with a factory 4 Barrel Carburetor and the 351 Cleveland engine.

$0 Price: $39.55

Buy Details

Availability: In-Stock Item
Item #: 14293 -

This is a 2 piece heat riser choke tube that provides heat to the choke, so the choke will open up as the motor warms up. Made out of Stainless Steel. This tube is designed to work on the 1970, 1971, 1972 & 1973 Mercury Cougar or Ford Mustang with a factory 4 Barrel Carburetor and the 351 Cleveland engine.

$0 Price: $63.04

Buy Details

Availability: In-Stock Item
Item #: 15781 -

This 8 piece kit is for 1969 or 1970 Mercury Cougar and Ford Mustang with the 351 Windsor and a 4 Barrel Carburetor, where the choke tube enters through the side of the choke housing.

$0 Price: $69.22

Buy Details

Availability: In-Stock Item
Item #: 20547 -

This 8 piece kit is for 1969 or 1970 Mercury Cougar and Ford Mustang with the 351 Windsor and a 4 Barrel Carburetor, where the choke tube enters through the side of the choke housing.

$0 Price: $89.87

Buy Details

Availability: In-Stock Item
Item #: 15780 -

This 7 piece kit is for 1969 or 1970 Mercury Cougar and Ford Mustang with the 351 Windsor and a 2 Barrel Carburetor, where the choke tube enters through the bottom of the choke housing.

$0 Price: $44.55

Buy Details

Availability: In-Stock Item
Item #: 20546 -

This 7 piece kit is for 1969 or 1970 Mercury Cougar and Ford Mustang with the 351 Windsor and a 2 Barrel Carburetor, where the choke tube enters through the bottom of the choke housing.

$0 Price: $61.80

Buy Details

Availability: In-Stock Item
Item #: 15265 -

Correct fiberglass insulation, fittings, rubber hose and S clip. Should fit all 1967-68 Mercury Cougar or Ford Mustang with stock cast iron 390 exhaust manifolds, and Factory Ford Holley carburetors.

$0 Price: $56.95

Buy Details

Availability: In-Stock Item
Item #: 41489 -

These steel tubes are made to exacting O.E.M. standards and specifications. All choke tubes have the proper fiberglass insulation, fittings, rubber hose, and S-clip. Also includes cold air tube when applicable.

$0 Price: $30.75

Buy Details

Availability: In-Stock Item
Item #: 14297 -

Exact OEM standards and specifications for the 429 Cobra Jet / Quadrajet for the 1971 Mercury Cougar or Ford Mustang.

$0 Price: $30.75

Buy Details

Availability: In-Stock Item
Item #: 14338 -

Exact OEM standards and specifications.

$0 Price: $25.07

Buy Details

Availability: Out of Stock
Item #: 14299 -

Exact OEM standards and specifications. Correct fiberglass insulation, fittings, rubber hose and S clip.

$0 Price: $385.07

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20363 -

Very rare one year only heat riser "S" shaped metal tube that attaches to the heat shield on the passenger side front portion of the exhaust manifold. Correct for all 1968 Cougars equipped with the 390 cubic inch engine.Ford part number C8AZ-9652-A.

$0 Price: $333.33

Buy Details

Availability: In-Stock Item
Item #: 14098 -

*NOTE: This item comes un-painted from the manufacturer.Very correct reproduction of an impossible to find part. The only difference I can detect is that this original weighs just an ounce or two more than the original. Click on images to enlarge. Customer feedback found at mercurycougar.net: Boy service is just not the same as the "good old"? days. I ordered a half a trunk load of parts and pieces from West Coast Classic Cougar and about 2 hours later got a phone call informing me that the...

$0 Price: $185.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33490 -

Factory installed, used engine mount heat shield, for any 1969-70 Boss 302 Mercury Cougar Eliminator or Ford Mustang. Mounts to the driver side mount and the asbestos portion lays under the exhaust manifold. Basic Ford part number is 6C038 for motor mount heat shields.  *Note - this item will likely not work with headers.*Note - this part does contain asbestos.

$0 Price: $104.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18960 -

Correct for all 1967 Cougars with a 289. Keep in mind the Cougar never came factory with a 289 HiPo.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27459 -

C8AZ-9A603-C metal shroud and tube assembly that attaches to the factory 1968 air cleaner assembly on all C code 289-2V engines as well as F code 302-2V, and J code 302-4V engines all for 1968. We do not believe that this set up came with the Canadian export Cougars, those 1968 Cougars should have the closed PCV system, much like the 1967 49 state Cougars.Do to age and their location our used risers will have minor surface rust, but otherwise be in good condition. Reproduction version of this...

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24377 -

C8AZ-9A603-C metal shroud and tube assembly that attaches to the factory 1968 air cleaner assembly on all C code 289-2V engines as well as F code 302-2V, and J code 302-4V engines all for 1968. We do not believe that this set up came with the Canadian export Cougars, those 1968 Cougars should have the closed PCV system, much like the 1967 49 state Cougars.Do to age and their location our used risers will have rust and or be very thin in spots. Reproduction version of this part is no longer...

$0 Price: $60.89

Buy Details

Availability: Out of Stock
Item #: 18934 -

Grade B exhaust manifold heat shield for any 1970 Mercury Cougar or Ford Mustang with 351C engine, 2V or 4V, it doesn't matter. Uses a separate, small diameter metal tube (part number D0OZ-9652-A) that attaches to the 1970 Cleveland air cleaner snorkel. Grade B used will have minor pitting, and may have small holes and or rough rusted edges. When mounted it would be difficult to see the defects. We also stock A grade versions.Replaces Ford part number D0OZ-9A603-F.

$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18542 -

Since we have a difficult time keeping grade "A" Windsor heat shields in stock we also offer a driver quality version. This unit will be very thin from rust in certain areas. C9OZ-9A603-A Metal shroud and tube assembly that attaches to the factory 1968-1969 air cleaner assembly on all 351 Windsor engines both H code 351-2V and M code 351W-4V (1969 offering only). *Note - for 1970 this shield is used after build date of 2-2-1970, but could be used on prior dates. We suspect that the early 2...

$0 Price: $149.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25017 -

D0AZ-9A603-C This is a two piece metal shroud unique to early production 1970 H code 351-2V Windsor Cougars. Due to problems Ford had with this design they returned to the 1969 style later in the year (after 2-2-70). *Note - 1970 351-2V Windsor cars build before 2-2-1970 used a two piece heat shield. Also used air cleaner snorkel D0OZ-9A626-B and a paper 'S' tube. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts....