All Products

Aluminum snap on moulding for the rear of the front fenders on 1971 Mercury Cougar XR7 and XR7 convertibles. Used only up until 2-1-1971. Discontinued there after. Made from anodized aluminum, subject to nicks and scratches from prior use. Driver side only. Also available restored, but only as a 3 piece set. Replaces Ford part number D1WY-16C133-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give...

1968 Mercury Cougar right or passenger side fender moulding found on the GT-E models. This unique trim splits the lower silver color from the body color. The unit shown is the one you will receive. Near mint, excellent original bright dip finish, an out of package (we still have remnants of the crispy brown FoMoCo wrapper) NOS part with minimal shelf wear. Best you will ever find, ready to put on the car as is. We won't always have this stick of trim in stock, but we will work to accurately...

1968 Mercury Cougar right or passenger side fender moulding found on the GT-E models. This unique trim split the lower silver color from the body color. This core piece good is for restoration. We won't always have this stick of trim in stock, but we will work to accurately describe the exact piece that we do have in inventory. We will take used GT-E trim in trade towards the reproduction GT-E trim call 503-463-1130 for details.Ford part # C8WY-6516039-A.Due to the difficulty in obtaining trim...

Aluminum snap on moulding for the rear of the front fenders on 1971 Mercury Cougar XR7 and XR7 convertibles. Used only up until 2-1-1971. Discontinued there after. Made from anodized aluminum, subject to nicks and scratches from prior use. Passenger side only. Also available restored, but only as a 3 piece set. Replaces Ford part number D1WY-16C132-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we...

Core driver side (left hand) center grill moulding / trim for the Mercury Cougar. Good used core that will have minor dings, dullness, and scratches. Ford part # C7WY-8A157-A. *NOTE* Keep in mind we will buy most moulding / trim found on the Mercury Cougar. Check out this video ...

NOS driver side (left hand) center grill moulding / trim for the Mercury Cougar. These NOS parts will almost always show some amount of shelf wear. The tooling was also typically near the end of its life, so do not be alarmed when you find the fit and finish is not as good as our restored trim. Ford part # C7WY-8A157-A. *NOTE* Keep in mind we will buy most moulding / trim found on the Mercury Cougar. Check out this video ...

Restored driver side (left hand) center grill moulding / trim for the Mercury Cougar. No core needed for this purchase. Looks better than NOS! Ford part # C7WY-8A157-A. *NOTE* This unit carries a $20 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim section. Keep in mind we buy most trim and mouldings found on a...

Used driver side (left hand) center grill moulding / trim for the Mercury Cougar. Good used driver quality trim with no obvious dings, deep scratches or corrosion. Perfect for your daily driver that is in above average condition. Ford part # C7WY-8A157-A. *NOTE* This unit carries a $20 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you...

Core passenger side (right hand) center grill moulding / trim for the Mercury Cougar. Good used core with minor dings, scratches, and dullness. Ford part # C7WY-8A158-A. *NOTE* Keep in mind we will buy most moulding / trim found on the Mercury Cougar. Check out this video ...

NOS passenger side (right hand) center grill moulding / trim for the Mercury Cougar. These NOS parts will almost always show some amount of shelf wear. Also, the tooling was typically near the end of its life, so do not be alarmed when you find the fit and finish is not as good as our restored trim. Ford part # C7WY-8A156-A. *NOTE* Keep in mind we will buy most moulding / trim found on the Mercury Cougar. Check out this video ...

Used exterior driver side (left hand) header moulding / trim for the Mercury Cougar or Ford Mustang convertible. If your stainless parts have no real damage you may consider investing in a free standing buffer and polishing kit. With a bit of elbow grease and time, you can make those trim pieces look better than new! Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. *NOTE* These do not pry off! The fasteners are located on the bottom...

Used exterior passenger side (right hand) header moulding / trim for the Mercury Cougar or Ford Mustang convertible. If your stainless parts have no real damage you may consider investing in a free standing buffer and polishing kit. With a bit of elbow grease and time, you can make those trim pieces look better than new! Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. *NOTE* These do not pry off! The fasteners are located on the...

Restored driver (left hand) side upper headlight housing moulding for any 1971-72 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the core...

Restored driver (left hand) side upper headlight housing moulding for any 1973 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the core...

Chrome trim for the upper headlight housing. "L" shaped trim in Grade A used condition, very tough to find in this condition, click the 'notify me' tab for email notification of new available stock. Fits 1971-72 Mercury Cougar only. Grade A trim will be pit free, but will have some freckling present. Passenger side upper trim.Replaces Ford part number D1WB-13B164-AA.

Chrome trim for the upper headlight housing. "L" shaped trim in Grade B used condition, very common to find in this condition. Fits 1971-72 Mercury Cougar only. Grade B trim will have limited pitting or minor road scars. Not quite show quality, but will be unbroken. Passenger side upper trim.Replaces Ford part number D1WB-13B164-AA.

Restored passenger (right hand) side upper headlight housing moulding for any 1973 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the...

Restored passenger (right hand) side upper headlight housing moulding for any 1973 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the...

Reproduction moulding for 'upper windshield garnish' for any 1970 Mercury Cougar or 1969-70 Ford Mustang. This item not for 1969 Cougar hardtops or for convertibles. Item comes in black as shown, paint to match non-black interiors. This is a made in Taiwan part, and we recommend our used header mouldings. Ford part # C9ZZ-6503606-A.

Used moulding for 'upper windshield garnish' for any 1970 Mercury Cougar or 1969-70 Ford Mustang. This item not for 1969 Cougar hardtops or for convertibles. Item comes in black as shown, paint to match non-black interiors. Ford part # C9ZZ-6503606-A.

Here is our used center hood lip moulding / trim in grade "A" condition for your Mercury Cougar. This is a tough little unit to find in NOS form or grade "A" condition. Most of these will come with some very minor freckling in the chrome.Mercury part # D1WY-16958-A, Mercury casting # D1WB-16958-AA.

Here is our used center hood lip moulding / trim in grade "B" condition for your Mercury Cougar. This is a tough little unit to find in NOS form or grade "A" condition. Most of these will come with some pitting or minor scratches in the chrome, but will look great on your mid-level daily driver. You can save quite a bit of cash-o-la if you purchase this item in our 3 piece set that comes with the driver and passenger side mouldings. If you choose to purchase the set, you will need to make sure...

Here is our used center hood lip moulding / trim in grade "B" condition for your Mercury Cougar. This is a tough little unit to find in NOS form or grade "A" condition. Most of these will come with some pitting or minor scratches in the chrome, but will look great on your mid-level daily driver. Unlike the 1971-72 center moulding / trim, this 1973 piece has an indentation for the "walking cat" emblem and is much wider than the 1971-72 version. The walking cat emblem is sold separately. You can...

This is a tough little unit to find in NOS form or grade "A" condition. Most of these will come with some very minor freckling in the chrome. Usually the attaching nuts are missing from the Ford boxes. May or may not include the Ford box, depends on stock.Mercury part # D1WY-16958-A, Mercury casting # D1WB-16958-AA.

Restored Hood peak or hood lip trim for any 1971 or 1972 Mercury Cougar. We also have grade A and B used hood mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the core charge and we send your...

Restored Hood peak or hood lip trim for any 1973 Mercury Cougar. We also have grade A and B used hood mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the core charge and we send your parts...

This is a good used core piece of trim that is ready to be restored or bolted onto that less than perfect driver.

Here is our used driver (left hand) side hood lip moulding / trim in grade "A" condition for your Mercury Cougar. This is a tough littler unit to find in NOS form or grade "A" condition. Most of these will come with some minor freckling in the chrome.Mercury part # D1WY-16857-A, Mercury casting # D1WB-16857-AC.

Here is our used driver (left hand) side hood lip moulding / trim in grade "B" condition for your Mercury Cougar. This is a tough little unit to find in NOS form or grade "A" condition. Most of these will come with some pitting or minor scratches in the chrome, but will look great on your mid-level daily driver. You can save quite a bit of cash-o-la if you purchase this item in our 3 piece set that comes with the center and passenger side mouldings. If you choose to purchase the set, you will...

NOS driver side (left hand) hood lip moulding / trim for the Mercury Cougar. These NOS parts will almost always show some amount of shelf wear and often the tooling was near the end of its life so do not be alarmed when you find the fit and finish is not as good as our restored trim.Ford part # C7WY-16855-A

We do what we have dubbed as "core matching". The better quality cores you send us, the better product you will get in exchange. If you would prefer your original cores be restored just mention it in a note when you send in payment with your restorable parts. It is also a good idea to scratch your initials on the back side. New hood trim attaching clips with nuts available here.    Fits: 1970 Mercury Cougar ...

Restored driver side hood lip moulding for any 1971-73 Mercury Cougar. We also have grade A and B used hood mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the core charge and we send...

Good used core trim part that is ready for restoration.

Here is our used passenger (right hand) side hood lip moulding / trim in grade "B" condition for your Mercury Cougar. This is a tough little unit to find in NOS form or grade "A" condition. Most of these will come with some pitting or minor scratches in the chrome, but will look great on your mid-level daily driver. You can save quite a bit of cash-o-la if you purchase this item in our 3 piece set that comes with the center and driver side mouldings. If you choose to purchase the set, you will...

Restored passenger side (right hand) hood lip moulding / trim for the Mercury Cougar. They really do look as good in person as in this photo. Due to the "enclosed" nature of this design only cores with minor dings can be restored. Ford part # C7WY-16856-A. *NOTE* This unit carries a $50 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you...

Here is our restored passenger (right hand) side hood lip moulding for any 1971 1972 1973 Mercury Cougar. We also have grade A and B used hood mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating....

This is the trim piece that goes along the front edge of the hood. Ford Part #: C9WY-16856-A Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Keep in mind we pay well for quality 69 hood lip mouldings. Fits: 1969 Mercury Cougar (Standard, XR7 and Eliminator) *Tip* Even if your restored trim part(s) were never dented they still will have about 10-15% thinner material on the face after restoration and of course more if there were...

Correctly restored, anodized aluminum trim. Requires painting in the recessed areas. New hood trim attaching clips with nuts available here.   Fits: 1970 Mercury Cougar

This D3ZZ-17830 rubber strip is actually intended for a 1973 Ford Mustang rear bumper but properly modified they do work nicely on a 1973 Cougar front bumper that requires impact strips. These are "substitute" parts and will involve bending them to the contour of your bumper, trimming them on one end and drilling three holes in your bumper. If you don't like the idea of drilling extra holes in your bumper, removing three studs per side from the strips and using sheet metal screws to install...

This trim part fits on the driver side (left hand) of the package tray between the backseat and the rear window. These are often sun baked, but we will try and pick out a nice clean one for you. Unfortunately we cannot guarantee we will be able to supply the color of your choice, but we will try to accommodate. Ford Engineering # D1WB-65310A33-AWA (on the backside).

This trim part fits at the passenger side (right hand) of the rear window package tray. These are often sun baked, but will will be sure to try and pick out a nice clean one you. Unfortunately we cannot guarantee we will be able to supply the color of your choice, but we will try to accommodate. Ford Engineering # D1WB-65310A32-AWA (on the backside).

Driver side metal trim part that that runs along the interior roof edge and connects the "A" pillar plastic moulding to the rear window (quarter window) moulding on the inside. These came color keyed to the trim, most will need a fresh respray on interior paint. Please include desired color in the comments section and we will try to accommodate you if at all possible.

Metal trim part that connects the "A" pillar plastic moulding to the rear window (quarter window) moulding on the inside. These came color keyed to the trim, most will need a fresh respray on interior paint. Please include desired color in the comments section and we try to accommodate you if at all possible.

This two piece painted trim set helps to secure the dash pad in place at the bottom of the windshield. 1968 Mercury Cougar used a slightly shorter trim set due to the padded windshield pillar pads. The 1967 will work fine, all of holes line up the same. These 1967 trim pieces also have a smooth painted surface, 1968 Cougar pieces have a slightly textured painted finish. Our used pieces taken from parts cars usually need to be painted but sometimes will pass as is for a driver quality car. Will...

Used driver side (left hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference between the driver and passenger side mouldings and it is in the contour on the ends. These are not correct for the 1969 as the rear wheel opening was smaller in size and the 1970 had a factory screw hole at the rear. These 1970 mouldings are about 78-3/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple small...

This rocker trim moulding is the same for right as left. Like many decades old NOS parts it will show some shelf wear. Ford part number D1WY-6510176-A

Used passenger side (right hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference in the contour on the ends of this piece that differentiates driver and passenger side. These will not work on a 1970 as the rear wheel opening was increased in size for the 1970 model year. These 1969 mouldings are about 79-1/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple small dings and scrapes....

Used passenger side (right hand) lower rocker moulding / trim for the Mercury Cougar. There is a slight difference between the driver and passenger side mouldings and it is in the contour on the ends. These are not correct for the 1969 as the rear wheel opening was smaller in size and the 1970 had a factory screw hole at the rear. These 1970 mouldings are about 78-3/4" long. These almost always have one or two holes drilled in them are dull at the front due to road debris and have multiple...