Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 6961-7008 of 13397
MSRP:$19.99
$19.99 Price: $15.89

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 41861 -

This is a 100% accurate reproduction down to the captured lock washer and black Zinc coating. The only difference is that these are made from a substantially better grade of steel than the originals. These often break when you try to remove them to replace the vacuum actuator so if you are planning on doing that procedure we highly recommend buying these in conjunction with the actuators. Sold individually, two required per car. Cougar part number C7SZ-13A173-A. Also Fits: 1967 Ford...

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20513 -

This is the bolt that often gets destroyed when you try to remove it from the bottom side of the headlight bucket. Our West Coast Cougars come apart a little easier so we often are able to pull them with minimal effort. Cougar part number C7SZ-13A173-A. Application includes: 1967-68 Mercury Cougar and XR7, 1967-68 Ford Thunderbird, 1969-71 Lincoln Continental MK III. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in...

$0 Price: $8.87

Buy Details

Availability: In-Stock Item
Item #: 11-4002 -

Used mounting plate for the heater blower motor on the 67 - 68 Cougar or Mustang without A/C.

$0 Price: $13.37

Buy Details

Availability: In-Stock Item
Item #: 11-4003 -

Used mounting plate for the heater blower motor on the 69 - 70 Cougar or Mustang without A/C.Keep in mind that this same plate can be used on a 67 - 68 Cougar and Mustang heater blower motor with A/C.

$0 Price: $31.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14158 -

This retainer is found on the backside of the door panel and is held in place by two screws. Screws that hold plate on may be available upon request for an additional fee.

$0 Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14157 -

Used on the backside of all but the driver side door panel. The screws that hold this plate on may be available upon request for an additional charge.

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 10298 -

Spare tire, with styled steel wheel hold down disc. Fits all 1968-70 Mercury Cougar and Ford Mustang. Original Ford part number C8MY-1424-A. About 3 inches in diameter, this is the specified trunk hold down plate for the use with the factory mag wheels.

$0 Price: $5.00

Buy Details

Availability: In-Stock Item
Item #: 14207 -

4" mounting Plate for Standard Spare Tire. Replaces Ford Part #: C5ZZ-1424-A.

$0 Price: $123.18

Buy Details

Availability: Out of Stock
Item #: 41891 -

Correct looking mounting plates used to mount the 1970 original spoilers. Comes with all hardware shown, not intended for 1969 spoilers as the use of these requires large rectangular holes, found only on 1970 of the bottom side of the deck lid.

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 26199 -

This specialty screw attaches the gas pedal to the throttle linkage. Fun fact: the head looks like Phillips (and that works fine) but this is actually designed for a Pozi bit.

$0 Price: $0.29

Buy Details

Availability: In-Stock Item
Item #: 26135 -

Attaching screws for the headlamp adjusting screws for the 1967-70 Mercury Cougar and most other Ford and Mercury cars and trucks. Each of the headlamp adjusting screws uses 2 of these screws. A Cougar with 4 headlights would need a total of 16 of these screws.

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0017 -

Unique shouldered screw that keeps your switch in perfect alignment, using incorrect screws will damage the switch.Fixed columns require 3 screws. Tilt columns require 2 screws.  *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of...

$0 Price: $3.59

Buy Details

Availability: In-Stock Item
Item #: 33216 -

Set of 16 attaching screws for the headlamp adjusting screws for the 1967-70 Mercury Cougar and most other Ford and Mercury cars and trucks. Each of the headlamp adjusting screws uses 2 of these screws. A Cougar with 4 headlights would need a total of 16 of these screws.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41179 -

Fits 1967 Standard and XR7 Cougars or most Ford and Mercury with inside rear view mirrors. Also used on the 1967 xr7 hash marks located on the rocker.

$0 Price: $25.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23835 -

C5AZ-10A370-C Alternator mounting spacer, goes between the cylinder head and alternator housing. Fits 1968-70 390-2V, 390-4V, and 428CJ engines. Smog OK. There is no casting number but one is listed C5AE-10A370-C. Inside diameter 7/16". We measure them out at 1-5/8 inches long, supposed to be pink anodized or tinted.

$0 Price: $12.87

Buy Details

Availability: Out of Stock
Item #: 20314 -

These spacers are required to properly mount the trunk lock housing to the trunk. Two required per car, sold individually. Ford part number C7WY-6543565-A. Check out this video

$0 Price: $25.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24335 -

Steel spacer between cylinder head and pump. Inside diameter 3/8", length approximately 1-13/16".

$0 Price: $16.85

Buy Details

Availability: In-Stock Item
Item #: 31769 -

These spacers are required to properly mount the trunk lock housing to the trunk lid.  Sold as a pair. Replaces Ford part number C7WY-6543565-A. Follow this link to find the lock housing nuts. Check out this video

$0 Price: $0.81

Buy Details

Availability: In-Stock Item
Item #: 41256 -

1/4-20x1 inch stud. Sold individually. Found on various years and parts of Cougars. Used for attaching 1967-68 grilles to the headlight buckets. Also as replacement mounting studs for front and rear fender and quarter extensions. Zinc Dichromate (yellow-rainbow)

$0 Price: $1.15

Buy Details

Availability: In-Stock Item
Item #: 41263 -

10 of these are used to mount the 1968-71 Cougar hood scoop found on the 68 428 CJ, 1969-70 Eliminator, 1969-70 428 Ram Air equipped Cougars, and 1971 GT and 429CJ. Sold individually Zinc (dark silver).

$0 Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0396 -

Door window glass grommet or washer to protect the glass for the Mercury Cougar or Ford Mustang. These units are placed under the bolts for mounting the window stops and the channel bracket. Used on most full and mid sized Ford

MSRP:$23.85
$23.85 Price: $23.65

Buy Details

Availability: In-Stock Item
Item #: 15537 -

The first in a series on production facts, this handy volume examines seven years of data from just about every imaginable statistical angle! Ever wonder how many cars were painted like yours? How about the rarest paint & trim combination...or the most common? You'll find those tidbits and many more, as we show you the figures for: * exterior color * interior trimset * color and trimset * engine * transmission * engine and trans. This book also provided the total production for RPOs -...

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 41344 -

This is one of the best small block Ford V-8 books on the market. It covers 260-289-302 V8 engines. Carburetor numbers, distributor numbers, covers all engine brackets, pulleys, and parts of Ford small block engines. 100's of pages with pictures, casting numbers, and explanations by year. A must for concours detailing and year by year correctness. Author Bob Mannel, covers small block V8 engines and components 1962-69. References all Ford cars that these engines came in. Mustang, Cougar,...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 30538 -

Locking nut for attaching the door window regulator to the window channel bracket on any 1969-70 Mercury Cougar or Ford Mustang. While we do not sell the T-bolts for attaching to the regulator (T-bolt Ford Part # C8SZ-6523274-A), we do have a retainer to keep it in the front channel bracket. Find it here. This is not an exact replica of the t-bolt lock nut, but is a functional replacement part. Replaced Ford part #: 34975-S ...

$0 Price: $1.35

Buy Details

Availability: In-Stock Item
Item #: 31595 -

Flange nut for attaching any 1970 Mercury Cougar or Ford Mustang amber or red side marker lights. 8-32 threaded nut with wide flange. Two per lens, sold individually. 

$0 Price: $0.95

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 41744 -

Bumper bolt nuts sold individually. Also available in our bumper bolt kit.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more torque to flatten out properly for a good fit. We suggest that no matter what thickness your repro wavy washer is that you flatten them out in a vise prior to installation so as not to...

$0 Price: $1.35

Buy Details

Availability: In-Stock Item
Item #: 33668 -

Flange nut for the 69 - 70 Convertible Windshield Mouldings. Can also be used for attaching any 1970 Mercury Cougar or Ford Mustang amber or red side marker lights. 8-32 threaded nut with wide flange. Sold individually. 

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 25898 -

Self threading speed nut for attaching "COUGAR' scrip emblems to the rear quarter panel of any 68 - 70 Mercury Cougar. Sold individually, 4 needed per emblem. Whereas these work fine, the originals were an acorn style nut and look very different.

$0 Price: $1.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0427 -

Special nut with large diameter spinning washer for the set screw for the door glass adjustment. Sets and holds your door glass angle to allow a proper seal. Three set screws work in conjunction for each door glass and vent window combination. See your shop manual for actual procedure.See also 378696-S for the vent window and front door channel set screws.Ford part number 33797-S.

$0 Price: $0.86

Buy Details

Availability: In-Stock Item
Item #: 31898 -

383278-S 1/4-20 Nut with spinning or captured washer, sometimes called a swivel nut, for attaching various door window components for 1970-1973 Cougar and Mustang bolt-in door glass. This nut was used to fasten the guides into the 1970 bolt in glass. Additionally this nut was used for attaching the window channel bracket to door and quarter glass on the 1971-73 Cougar and Mustangs. This is a new or reproduction part from AMK.

$0 Price: $0.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0199 -

383278-S Nut with spinning or captured washer, sometimes called a swivel nut, for attaching various door window components for 1970-1973 Cougar and Mustang bolt-in door glass. This nut was used to fasten the guides into the 1970 bolt in glass. Additionally this nut was used for attaching the window channel bracket to door and quarter glass on the 1971-73 Cougar and Mustangs.

$0 Price: $19.15

Buy Details

Availability: In-Stock Item
Item #: 12869 -

Reproduction nut or inner bezel for the headlamp switch on all 1969-70 Mercury Cougar and Ford Mustangs. Replaces Ford part number C9ZZ-11650-A .

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11321 -

Nut or inner bezel for the headlamp switch on all 1969-70 Mercury Cougar and Ford Mustangs. These are used, and usually will have small blemishes. All will have good threads and chrome plating on the face.Ford part number C9ZZ-11650-A .

$0 Price: $20.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13078 -

Used bezel retaining nut for the headlight switch on any 1971-73 Mercury Cougar or 1971-72Ford Mustang. These are much better quality than those found in the 1969-70 cars. Good threads and very good chrome on the front as shown. Check the length for the 1973 Ford Mustang, we've had an owner that found one to be over 2 inches in length. Unfortunately, we do not have the longer length version.Replaces Ford part number D1ZB-11650-BA.

MSRP:$2.99
$2.99 Price: $1.95

Buy Details

Availability: In-Stock Item
Item #: 41610 -

Reproduction exterior convertible boot moulding / trim nuts for the Mercury Cougar or Ford Mustang and Torino. Here's another great reproduction brought to you by WCCC! Each vehicle will require 20 nuts. Sold individually.

$0 Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 41041 -

Reproduction nut that replaces Ford part # 34033-S. This is the nut that secures the pitman arm to the steering box. Has correct 7/8"-14 threads. Split washer also needed, not included, nut only.

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 41338 -

Four nuts per bucket seat, 8 total nuts per car with bucket seats. Sold individually. Replaces Ford part # 378643-S. Phosphate & Oil (gray & black) finish

$0 Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20179 -

Unlike our reproduction nuts these good used original nuts can be purchased individually and they cost less to boot! 8 required per car, 4 per bucket seat.