All Products

Used inner and outer driver side (left hand) wheel house as cut from a parts car. This is a hard part for us to obtain as we have to sacrifice all surrounding parts to remove it in its entirety. The almost always will have a substantial amount of rust showing at the very tips of the outers where they end behind the wheel. If you want to save shipping costs we can sacrifice the inner wheel house and sell you only the outer portion.Used inner and outer driver side (left hand) wheel house as cut...

Full driver (left hand) side front frame rail measures 52" long and the outer rail has weld nuts installed for proper installation. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

Full passenger (right hand) side front frame rail that measures 52" long and the outer rail has weld nuts installed for proper installation. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

Reproduction passenger side front fender apron that has the shelf for installing the battery tray. *Restoration Hint* This section of metal was VIN stamped, consider welding in the stamped VIN section to keep your car whole.Here's a little film to help you fortify your flexxy feline!

Reproduction stamped steel passenger side (right hand) front inner apron for the Mercury Cougar and Ford Mustang.Here's a little film to help you fortify your flexxy feline!

Guide that measures 10 5/8" long held in place by the outer trim that has four screws. Driver and Passenger are interchangeable.

This latest of a series of 67 - 68 reproduction sheet metal parts is just what the market has been waiting for! This listing is for the framework of the hood. This frame is for someone who needs to replace the rotted out bits of your hood frame, or for someone who simply wants a base to make a fiberglass hood on their own.  These hood frames are oversized and cannot ship through UPS or USPS, so it will need to ship via truck freight. You can expect to pay somewhere between $200-300...

This tube is connected to a rod that connects to the transmission. When your car is in park it works the system acts as a theft deterrent. Often the very ends of them get rusty from road salt and leaking master cylinder.Both tilt and fixed columns use the same part.

Used inner, small moulding that attaches to the driver side vertical grille support. Fits any 1971, 1972, or 1973 Cougar. Grade A used, will not have rust pits, good shiny chrome. Note these are pot metal, and the plating was pretty thin from back in the day. We also have grade B and restored trim. See related items. Ford casting number D1WB-13B136-AC or D1WY-13A112-B.

Used inner, small moulding that attaches to the driver side vertical grille support. Fits any 1971, 1972, or 1973 Cougar. Grade B used, will have some rust pits, good shiny chrome. Note these are pot metal, and the plating was pretty thin from back in the day. We also have grade A and restored trim. See related items. Ford casting number D1WB-13B136-AC or D1WY-13A112-B.

NOS inner, small moulding that attaches to the driver side vertical grille support. Fits any 1971, 1972, or 1973 Cougar. New old stock may show some scuffing from shelf wear. Note these are pot metal, and the plating was pretty thin from back in the day. We also have grade A and B and restored trim. See related items. Ford casting number D1WB-13B136-AC or D1WY-13A112-B.

Restored inner, small moulding that attaches to the driver side vertical grille support. Fits any 1971, 1972, or 1973 Cougar. We also have grade A and B used trim. See related items.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the...

Used inner, small moulding that attaches to the passenger side vertical grille support. Fits any 1971, 1972, or 1973 Cougar. Grade A used, will not have rust pits, good shiny chrome. Note these are pot metal, and the plating was pretty thin from back in the day. We also have grade B and restored trim. See related items. Ford casting number D1WB-13A113-AC or D1WY-13A112-A.

Used inner, small moulding that attaches to the passenger side vertical grille support. Fits any 1971, 1972, or 1973 Cougar. Grade B used, will have rust pits, good shiny chrome. Note these are pot metal, and the plating was pretty thin from back in the day. We also have grade A and restored trim. See related items. Ford casting number D1WB-13A113-AC or D1WY-13A112-A.

Restored inner, small moulding that attaches to the passenger side vertical grille support. Fits any 1971, 1972, or 1973 Cougar. We also have grade A and B used trim. See related items.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you...

Reproduction driver side inner rocker panel for the 69 - 70 Cougar Convertible

Reproduction passenger side inner rocker panel for the 69 - 70 Cougar Convertible

Used tilt / tilt away column shaft for the Mercury Cougar or Ford Mustang. Inner shaft with tight U-joint and perfect steering wheel mounting threads. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Quality inner wheel house made by Dynacorn patterned off of Grade A used panels provided by West Coast Classic Cougar.We also sell these as a complete set of four, which will save you money on shipping as we unbox them and nest all four together and fit them in one box.

Quality inner wheel house made by Dynacorn patterned off of Grade A used panels provided by West Coast Classic Cougar.We also sell these as a complete set of four, which will save you money on shipping as we unbox them and nest all four together and fit them in one box. ...

These hard rubber bump strips attach to the front bumper guards with 2 studs from the back side. Extreme care is needed prior to attempting to remove them. If you force the nut from the backside you will dislodge the stud from the rubber. For best results use a small wire brush on the studs first and soak liberally with a product like PB Blaster. Sold individually, right is the same as left, Ford Casting number as found on the back is D1WB-17A812-AB

This is for your automatic transmission 1969 Cougar XR7, Standard, Decor or Eliminator console. The 1969 is unique over the 70 in that it has a provision for your seat belt buckles. This requires an additional woodgrain insert, we also have one listed that does not require the additional insert (no holes). Absolute perfection in every detail, if all reproductions were this nice there would be almost no market for used parts. *Note - This console part does have pre-drilled holes for installing...

This is for your automatic transmission 1969 Cougar. The 69 is unique over the 70 in that it has a provision for your seat belt buckles. This does not require an additional woodgrain insert. Absolute perfection in every detail, if all reproductions were this nice there would be no market for used parts.

This is for your three or four speed manual transmission 1969 Cougar. The 69 is unique over the 70 in that it has provision for your seat belt buckles to be stored when not in use. This requires an additional woodgrain insert, we also have one listed that does not require the additional insert (no holes). Absolute perfection in every detail, if all reproductions were this nice there would be no market for used parts. *Note - This console part does have pre-drilled holes for installing the...

This console bezel is for your three or four speed manual transmission 1969 Cougar. The 69 is unique over the 70 in that it has a provision for your seat belt buckles. This does not require an additional woodgrain insert, so it is not technically correct for your Cougar. We list this unit because there is no quality XR7 burl grained inserts available at this time and some customers prefer the clean uncluttered look of the plain camera case finish. Absolute perfection in every detail, if all...

Correct color and texture, includes chromed plastic bezel. We also sell the decal only. NOTE: These inserts came with enough studs to fit multiple cars. When installing this insert, simply clip off the extra studs you don't need.

Grade "A" condition with rich luster on the woodgrain. Will have a few minor blemishes usually on the XR7 emblem and aluminum surround. No dents or scratches.Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts!

Grade "B" condition with dull luster on the woodgrain. Will have blemishes usually on the XR7 emblem and aluminum surround. Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts!

This listing is for the woodgrain only, no emblem or aluminum surround is included. Grade "A" condition with no extra holes, scratches or dings. Show quality, no excuses, satisfaction guaranteed.Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts!

1970-74 Mercury Cougar rimblow horn pad bezel with hand painted woodgrain. These have been painstakingly hand painted by a local artist. 1970-74 standard and 1970-74 XR7 straight style wood grain. Does not include the 'kitty', 'kitty' sold separately. Cores cannot be bent or rusted heavily. Does not include the 'kitty', Cougar Emblem sold separately. Cores cannot be bent or rusted heavily.Core charge is refundable when restorable 1970-74 woodgrain insert is received by WCCC. ...

This set of three woodgrain dash inserts for the Mercury Cougar without A/C are not as good as our grade "B" units. However, it will work for your lower quality daily driver. These retain an original looking finish and we carefully match these under bright lights to ensure they match color wise. This dash insert will have scratches, dings, or other blemishes, and all four toggle switch labels will be in place. Click here for the A/C version. (A/C version has the rectangular cutout in the...

This used set of three XR7 woodgrain dash inserts for the Mercury Cougar without A/C are the best of the best of which we can provide you with. These grade "A" inserts retain a rich, original looking finish and have not been subjected to prolonged damaging UV rays. We carefully match these under bright lights to ensure they match color wise. There may be light surface scratches, no dings or other blemishes, and all four toggle switch labels will be in place. Includes a brand new, correct XR-7...

This set of three woodgrain dash inserts for the Mercury Cougar without A/C are not as good as our grade "A" unit. However, it will work well for your daily driver. These retain an original looking finish and we carefully match these under bright lights to ensure they match color wise. This dash insert may have some slight scratches, dings or other blemishes, and all four toggle switch labels will be in place. Click here for the A/C version with the center hole.Here’s a little inspiration for...

This set of three woodgrain dash inserts for the Mercury Cougar with A/C are not as good as our grade "B" units. However, it will work for your lower quality daily driver. These retain an original looking finish that may be faded due to age and we carefully match these under bright lights to ensure they match color wise. This dash insert will have scratches, dings, or other blemishes, and all four toggle switch labels may not be in place. Click here for the non A/C version.Here’s a little...

This set of three woodgrain dash inserts for the Mercury Cougar with A/C are not as good as our grade "A" unit. However, it will work well for your daily driver. These retain an original looking finish and we carefully match these under bright lights to ensure they match color wise. This dash insert may have some slight scratches, dings or other blemishes, and all four toggle switch labels will be in place. Click here for the non A/C version without the center hole.Here’s a little inspiration...

This set of three woodgrain dash inserts for the Mercury Cougar with A/C are not as good as our grade "B" units. However, it will work for your lower quality daily driver. These retain an original looking finish and we carefully match these under bright lights to ensure they match color wise. This dash insert will have scratches, dings, or other blemishes, and all four toggle switch labels will be in place. (although the pictures may not be correct, you will get the correct A/C parts).Here’s a...

New old stock driver side interior door handle for base Standard model 1971-73 Cougar, 1971-73 Ford Mustang and Maverick and Torino. Ford part number D1AZ-6522601-ANote - Does not fit most standard Cougars or all XR7's. Interior code has to start with a 1 or letter A.

These interior door release handles are the only ones on the market from the 4 different manufacturers that are indexed correctly. They are the updated design for 2019 that fits level and the chrome is excellent. All the other versions either tip up or down too far when placed on the splines. These were used on the xr7 model in 1967 and on all Cougar / Mustang models in 1968.  The casting number on the back reads C7AB-5422617-A.

New old stock passenger side interior door handle for base Standard model 1971-73 Cougar, 1971-73 Ford Mustang and Maverick and Torino. Ford part number D1AZ-6522600-A Note - Does not fit most standard Cougars or all XR7's. Interior code has to start with a 1 or letter A.

These interior door release handles are the only ones on the market from the 4 different manufacturers that are indexed correctly. They are the updated design for 2019 that fits level and the chrome is excellent. All the other versions either tip up or down too far when placed on the splines. These were used on the xr7 model in 1967 and on all Cougar / Mustang models in 1968. The casting number on the back reads C7AB-5422616-A.

Used interior door release mechanism. Other Ford names include: door remote, control, linkage assy, latch assembly. The spring is the weak link on these parts. Passenger and driver side are different, this is for the driver side only, comes with attaching parts as shown. Replaces Ford part number C9AB-6221819-A.

Used interior door release mechanism. Other Ford names include: door remote, control, linkage assy, latch assembly. The spring is the weak link on these parts. Passenger and driver side are different, this is for the passenger side only, comes with attaching parts as shown. Replaces Ford part number C9AB-6221818-A.

Reproduction dust and safety plate for all C4 (code W) automatic transmissions also known as the Cruis-o-Matic transmission. Inspection cover for torque converter and flexplate.NOTE - Although the C4 and the FMX inspection plate look similar visually, they are in fact different sizes with different bolt spacing.

Dust and safety plate for all C4 (code W) automatic transmissions also known as the Cruis-o-Matic transmission. Inspection cover for torque converter and flexplate.

Dust or inspection plate for all 1971 Cougar or Mustang with the 429 Cobra Jet engine and C6 automatic transmission. Inspection cover for flexplate and torque converter.

Reproduction steel inspection cover for all 67 - 70 Cougars or Mustangs with 390, 427, or 428CJ engines with the C6 automatic transmissions. Dust and inspection cover for the flexplate and torque converter, also referred to as a Transmission C6 dust cover 390GT, 428GT500, 428CJ, 428SCJ.

Steel inspection cover for all 1967 Cougar or Mustang with any of the FE engines 390, 427, or 428CJ and C6 automatic transmissions. Dust and inspection cover for the flexplate and torque converter. Usually will have a casting number of C6AP-7986-A stamped on it, also referred to as a Transmission C6 dust cover 390GT, 428GT500, 428CJ, 428SCJ.*Note - Some of these plates do not have the vent, or dimple at the bottom, like in the picture.Please keep in mind that this is a 40+ year old used item....

1971 - 1973 Small block engine (351 cubic inch) and C-6 automatic transmission inspection cover. Transmission code 'U' found on select 1971-73 Cougars and 1971-73 Mustangs. Inspection plate for the flex plate and torque converters.Ford part number D1OZ-7986-A.