Contact Us / Visit Us (click here)
We are trying to track down what is causing some customers to get "An Unexpected Error".
If you get "An Unexpected Error", please let us know what page gave you this error: Report Error.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
'https://cdn.cougparts.com/dc/15280/1477527846_t.jpg','https://cdn.cougparts.com/dc/15280/1477527847_x.jpg','https://cdn.cougparts.com/dc/15280/1477527848_x.jpg'
  • Roll Up Door - Center Console - Repro ~ 1968 Mercury Cougar - 1968 Ford Mustang - 15280
  • Roll Up Door - Center Console - Repro ~ 1968 Mercury Cougar - 1968 Ford Mustang - 15280
  • Roll Up Door - Center Console - Repro ~ 1968 Mercury Cougar - 1968 Ford Mustang - 15280

Item #: 15280

Login to add this item
to a saved wishlist
Price: $49.95
    Cost: 3996
    Earns: 200
    Bonus: 0

    Availability

    In-Stock Item - Next Business Day

    Applications

    Description

    This reproduction roll up door for the Standard Mercury Cougar's center console features a bright finished metal front on flexible rubber back. Includes chrome knob. Different from the 1967 door in that it has the much wider handle.

    Replaces Ford part # C8ZZ-6506024-A.



    Customer review: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torque specs for my rocker arms on my Cougar. I wanted to check to make sure they where in specs when I was replacing my valve cover gaskets. No one I called could tell me because it wasn't on their computer. At WCCC they said they were not sure but looked it up in a manual. That's customer service. And since they seem to be the only yard that keeps parts for my year of Cougar and were helpful they are going to get all my orders for the hard to find parts for my cat. Hopefully they have the passenger side mirror that matches the driver side one. user name "Slim Chance", mecurycougar.net



    Need some help getting that old unit out? Here’s some guidance from our buddy Randy Goodling.



    All 67-68 standard consoles had a storage compartment. The slide up doors are different between the 2 years due to the handle being different. The 67-68 Mustang console also had this slide up door. This slide up door works like the top on a roll top desk. In order to replace it the door must be slid off the tracks from the bottom. In order to do that the front of the console must be removed from the body of the console.



    To remove the front of the console there will be 2 Phillips head screws going into the metal dash frame above the radio. Then slide the door open and reach around on each side of the door. There are 2 studs with self tapping nuts on each side of the door, 3/8" socket as I recall, remove those nuts. Then you will need to reach up to the backside of the radio. In the middle of the radio body there will be 1 nut that holds the back of the radio up, 7/16" or 1/2" socket as I recall. That will need removed. Then find where the antenna plugs into the radio body, should be on the passenger side rear corner, and unplug that. With all that done the front section of the console should be ready to remove. Pull it straight back towards the rear of the car. You may need to lift it a little to clear the lower console pad. Do not lift too high as you risk breaking the plastic frame of the console where those 4 studs go through it. Also be careful of the rear radio mount, where you removed the 1 nut. That nut holds the rear of the radio to a bracket that spans the inside of the console, if you pull too hard you risk breaking the plastic console base where that bracket bolts onto each side. You can give yourself a little wiggle room here if you also remove the 2 bolts that hold that bracket to the base. Look on each side of the console and you will see a bolt head close to the top edge, 3/8" socket as I recall. Remove both of those bolts and the bracket will be free of the base. Be careful here though because once you take both those bolts out there will be nothing holding the weight of the radio up and it will want to fall, which could also cause more damage. The radio will stay attached to the face plate all this time unless you want to remove it separately. To do this pull the radio knobs off and remove the nuts that hold the radio to the face plate. Then they will come out separately. Do not try to just remove the front of the radio and leave the back attached. This will leave all the weight on that rear bracket when you remove the face plate and that will break the console base plastic. Once you have the face plate and radio part ways out you will need to deal with the wiring. If it is the factory radio it will be a simple unplug, if it is an aftermarket radio hard to say what you will find. Or if you do remove the radio from the face plate you should have enough wiring to just let the radio lay without undoing any wiring. Now that the face plate is removed the sliding door will slide right off the bottom of the tracks. Install the new door and reinstall the console face. Job done. It's easier than it sounds. Good luck, Randy Goodling



    Specifications:
    Shipping Weight: 0.50 LBS
    (weight shown may be the dimensional weight)

    This item must ship via

    No Reviews Found, be the first to review this product.
    Number of questions: 0
    Please login to ask a question.

    Why am I being warned about potential exposure to chemicals in motor vehicle parts?


    • Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
    • When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
    • This product is known to contain the following listed chemicals:
    Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...
    - Mike Dunlap
    WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...
    - Jim Davis
    I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...
    - Voodochild5
    What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...
    - Kenneth Milden
    I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...
    - Denver
    I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...
    - pandamonium2112
    I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...
    - Rod (Saskatchewan, Canada)
    I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...
    - Rod (Canada)
    I was having difficulty placing my order on the website and spent a couple of hours trying with no luck (ending in immense frustration). I decided to finally just call and order my parts over the phone (4 small items). Was surprised that Don Rush...
    - Tim (1969 Cougar XR7)
    Brake booster failed on our 1970 Mach1. We had ordered a new 2022 Mach1 to match the old one and the dealer wanted to use both cars in a promotional ad. When we received the replacement booster it failed within a few minutes of installation. I...
    - Alan
    E4I08