Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 10993-11040 of 13244
Price: $87.89

Buy Details

Availability: Out of Stock
Item #: 11827 -

This XR7-G center cap adapter cone was used in conjunction with the RADER wheel and is needed to mount the center cap to the aluminum centered wheel. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know...

Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 24476 -

Notice the blemishes on this NOS cap? This is very typical of what we see on many NOS caps. This chrome XR7-G center cap with magenta background and chrome XR7-G logo is designed to fit the RADER chrome cone adapter or mount directly to the 1968 chrome style steel wheel.  This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or...

Price: $121.86

Buy Details

Availability: Out of Stock
Item #: 18530 -

Used original chrome center caps with magenta background and chrome XR7-G logo for the XR7-G styled steel wheel.

Price: $307.75

Buy Details

Availability: Out of Stock, Discontinued
Item #: 42409 -

QUALITY HAS GONE DOWN ON THESE CAPS, UNTIL THE SUPPLIER CAN CORRECT THE ISSUE, WE WILL NO LONGER HAVE THESE AVAILABLE. Correct reproduction XR7-G chrome center caps with the correct magen ta background and chrome XR7-G logo that includes three part mounting hardware. These are die-cast just like the originals, other reproductions out there are made on a lathe with aluminum stock. Sold individually. Ford part # C8WY-1130-F. *NOTE* When installing these die cast center caps, keep in mind over...

Price: $18.86

Buy Details

Availability: Out of Stock
Item #: 13-1113 -

New in-house cut vinyl applique for replacing the burl wood overlay on your 1969 Cougar console insert.

Price: $1,001.85

Buy Details

Availability: Out of Stock
Item #: 14762 -

Very correct reproduction, injection molded like original with correct grain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, triple-humped lid, insert designed for cars with automatic transmission, simulated burl walnut bezel (correct for XR7), front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1970 style compartment box with push button lid, hinge for...

Price: $936.86

Buy Details

Availability: Out of Stock
Item #: 17783 -

Correct reproduction available only from WCCC. Notice our consoles feature the correct Burl grain xr7 applique and correct for xr7 3 hump lid. Only available in black, we suggest SEM flexible coating if you need to color them to match your interior. We find that custom mixing the paint will get you better results than their off the shelf selections. Inquire with your local Automotive paint supply house.

Price: $1,495.89

Buy Details

Availability: Out of Stock
Item #: 19223 -

Pictured here is a representation of the console you can expect to get from us. Notice this is not a restored console, but rather a compilation made from several units taken out of parts cars to make one good example. As with the console shown here, it will not be perfect. If you would like to know where the blemishes are on the console you will receive, please contact us for details. Do know we understand how delicate they are and make every effort to ensure it is packaged properly. We do...

Price: $1,610.87

Buy Details

Availability: Out of Stock
Item #: 12153 -

Pictured here is a representation of the console you can expect to get from us. Notice this is not a restored console, but rather a compilation made from several units taken out of parts cars to make one good example. As with the console shown here, it will not be perfect. If you would like to know where the blemishes are on the console you will receive, please contact us for details. Do know we understand how delicate they are and make every effort to ensure it is packaged properly. We do...

Price: $1,549.85

Buy Details

Availability: Out of Stock
Item #: 19190 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

Price: $3,285.86

Buy Details

Availability: Out of Stock
Item #: 20012 -

Nice original Saddle XR7-G center console with original leather and all pieces intact with no cracks. This unit is trimmed for a car with factory A/C. Harness to fog lights and sunroof sold separately. Ford part # C8WY-65045A36-X1A for the lower main body. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks,...

Price: $499.86

Buy Details

Availability: Out of Stock
Item #: 31491 -

Good used base for the XR7G with no cracks. The Cougars equipped with air conditioning had the last few inches trimmed off. It is a rather rough, hand cut from the factory.  *NOTE* The base shown has been cut for AC.

Price: $1.89

Buy Details

Availability: Out of Stock
Item #: 19334 -

Headlamp center shaft actuator rod clips. Sold individually, two clips needed, one on each side of the shaft. Not really needed, probably kept the shaft ends from moving during installation. We have found two different sizes of these clips. No pattern between 1969 and 1970.

Price: $38.85

Buy Details

Availability: Out of Stock
Item #: 32769 -

New old stock check valve for Bendix brake boosters. This is a white plastic check valve. Ford part number D0AZ-2365-A.Check the related items, for a reproduction rubber grommet.

Price: $72.86

Buy Details

Availability: Out of Stock
Item #: 24376 -

Screws onto the cylinder head smog tubes. Sold individually, two needed per application. Ford part number C8AZ-9A487-A.

Price: $19.15

Buy Details

Availability: Out of Stock
Item #: 22631 -

New reproduction of Ford part number D0OZ-9S500-A, Hi Temperature choke gasket for all 1970-71 429 Cobra Jet engines. Must utilize the stock Ford cast iron 429 Cobra Jet intake manifold. Fits J and C code 1971 Mercury Cougar and Ford Mustang, and J and C code 1970-71 Ford Torino, Ford Ranchero, Mercury Cyclone.*Note - Excludes 429 Super Cobra Jet engines which used a different intake manifold.

Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 12343 -

Clamp for supporting and connecting the hard line from the dryer and the suction hose from the condenser.. Two piece clamp with screw. No actual Ford part number listed in the MPC or assembly manuals, the basic part number would be 19B632 though. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon...

Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 12347 -

Clamp for supporting and connecting the hard line from the dryer and the suction hose from the condenser.. Two piece clamp with screw. No actual Ford part number listed in the MPC or assembly manuals, the basic part number would be 19B632 though. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon...

Price: $9.86

Buy Details

Availability: Out of Stock
Item #: 11846 -

These are used hose clamps that have a tab and fold over on them selves. These were dipped in a rubber like substance to prevent chaffing. The ones that we have available do have some cracking or damage to this coating. It should be easy to 'dip' them again with the product that is available in most hardware stores. We normally see 2 of these clamps, or straps bundling the hoses on most cars. These clamps should fit a variety of different Ford and Mercury products, not just Mustang and Cougar....

Price: $32.85

Buy Details

Availability: Out of Stock
Item #: 26501 -

This is the 100% correct Ford original battery hold down clamp. Stamped with D0OB10755A. Ford Part #: D0OZ-10718-B. Note: The battery hold down clamp offered by many Mustang / Cougar vendors as "Concours Correct" is actually for the 1974 - 1978 Cougar /  Mustang.

Price: $28.89

Buy Details

Availability: Out of Stock
Item #: 25271 -

Yoke style factory exhaust pipe clamp. For 2 inch outside diameter exhaust pipes. Two piece clamp see picture Ford part number D1AZ-5A231-C.

Price: $28.89

Buy Details

Availability: Out of Stock
Item #: 23900 -

Band or ring style factory exhaust pipe clamp. For 2-1/4 inch outside diameter exhaust pipes. Comes with a course sheet metal type hex head bolt. Ford part number C6AA-5A272-A. *Not all 1969 & 1970 Cougars had 2-1/4 inch tailpipes from the factory. Check the outside diameter of your current tailpipe for fitment. Part number C5DA-5A272-B is the factory style 2" tailpipe clamp.

Price: $28.89

Buy Details

Availability: Out of Stock
Item #: 25270 -

Yoke style factory exhaust pipe clamp. For 2-1/4 inch outside diameter exhaust pipes. Two piece clamp see picture Ford part number D1AZ-5A231-A.

Price: $13.95

Buy Details

Availability: Out of Stock
Item #: 19022 -

Includes battery clamp and bolts required to mount battery on tray. Please note that vinyl coating will almost always crack along edges shortly after installation.

Price: $2.88

Buy Details

Availability: Out of Stock
Item #: 19818 -

Two of these clips per side are required to hold the interior padded pillar pads the the "A" pillars on your 1968 Cougar.Replaces Ford part number 381896-S2.

Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 10195 -

Metal 2 piece bracket that mounts to the front of the radiator core support and separates the sight glass to dryer hose and the discharge hose from the condenser. Correct for 1971-73 Cougar and Mustang, and 1970-71 Torino, Cyclone, Ranchero, Montego.Replaces Ford part number D0OZ-19B632-A.

Price: $1.89

Buy Details

Availability: Out of Stock, On Order
Item #: 14260 -

Delicate clip that attaches to a nail-head stud attached to the firewall. Very functional and visible, rather hard to find in unbroken condition.

Price: $3.87

Buy Details

Availability: Out of Stock
Item #: 26517 -

This fragile little clip attaches to the bottom outer edge of the front fender extension and holds the tail of the aluminum eyebrow moulding to the extension, one per side. They almost always fail when you remove them, and to be honest, we rarely have them in stock. We do not list these hard to find parts to tease you, but rather for documentation purposes. We do offer a nice reproduction clip that you can get right here that will work great. ...

Price: $2.88

Buy Details

Availability: Out of Stock, On Order
Item #: 26511 -

Used hood lip moulding / trim clip for the Mercury Cougar. Ten of these clips (five per side) are required to mount the two aluminum "L" shaped hood lip mouldings to the 1970 hood. These clip are for the purest who places a high value on originality. If originality is not an issue, you can get our inexpensive reproduction clips here and save a little of that hard earned money.

Price: $10.67

Buy Details

Availability: Out of Stock
Item #: 26515 -

This clip looks just like the smaller rear deck / trunk lid moulding clip but is larger (as our comparison picture shows). One clip per side is used to attach the tail end (larger end) of the moulding to the extension. Rarely will the clip you get look as good as the pictured here, usually the "finger" will be missing. These clips are for the purest where originality is of the utmost importance. If originality is not an issue, you can get our excellent reproduction clip right here and...

Price: $17.87

Buy Details

Availability: Out of Stock, On Order
Item #: 10580 -

Reproduction rocker moulding / trim end clip for the Mercury Cougar. This clip is a steel clip with a wire like the original. These units are technically for the 1969 and 1970 Cougar, but they will also work well with the 1968 rocker moulding / trim. Four of these clips were used on all 1969 Cougars except for the Sport Special which used two. The 1970 Cougar also uses two per car. Sold individually.Will work on 71-3 with modification. ...

Price: $16.88

Buy Details

Availability: Out of Stock
Item #: 19456 -

Ford part number C9WY-6510198-A. This is the metal rocker moulding clip that attaches the front and rear of the mouldings to the car in 1969 (except the Sport Special which only has them on the rear). In 1970 a Phillips screw held the rear end of the rocker moulding to the quarter panel on each side so just the fronts of the mouldings used these clips in 1970. Keep in mind that this same basic clip can be found on 1977-1979 Mercury Cougars and Ford Thunderbirds that were equipped with optional...

Price: $13.86

Buy Details

Availability: Out of Stock
Item #: 25740 -

Correct plastic rocker moulding clips with Ford engineering # C9WB-6510182-A, Ford part #C9WY-6510182-A. There are five of these on each side for a total of ten per car.Fits: 1969 Mercury Cougar1970 Mercury Cougar

Price: $4.86

Buy Details

Availability: Out of Stock
Item #: 20671 -

Factory used clip for attaching the long black plastic rear bumper filler on any 1971-73 Mercury Cougar. A total of 8 clips are needed to attach the rear bumper filler. Most have either broken with age, or have broken during the removal of the filler. Sold individually. Limited supply of used, we also stock a suitable reproduction clip. See Related.

Price: $4.50

Buy Details

Availability: Out of Stock
Item #: 27466 -

Clevis type attaching clip for attaching the accelerator throttle rod to the carburetor on all 1967 and 1968 Cougars. The correct installation is with the clip pushed on from the top, barbs down. This is the right handed style.Original Ford part number C2VY-9826-A

Price: $22.37

Buy Details

Availability: Out of Stock
Item #: 32189 -

Used clip for mounting the vacuum modulator steel line or tube on 1967-68 Mercury Cougar or Ford Mustang with C4 or automatic transmission. Mounts under one of the top bolts where the bell housing connects to the engine block. This is not a reproduced part, that we know of.  The basic Ford part number is 7C072.

Price: $12.00

Buy Details

Availability: Out of Stock
Item #: 21-0082 -

These little clips are what were used to fasten the dash face pad to the dash bezels on a 1968 standard or decor level Cougar. They are very difficult to come by and we have yet to find a suitable substitute. We suggest that if you need more than a few of these clips that you consider using strips of adhesive Velcro in lieu of these clips as Velcro holds the fragile aluminum trim more evenly against your bezels and is easier to install and remove for future maintenance. *NOTE* There are 13 of...

Price: $5.85

Buy Details

Availability: Out of Stock
Item #: 25748 -

NOS under hood plastic clip for the 1968 Mercury Cougar or Ford Mustang.

Price: $11.57

Buy Details

Availability: Out of Stock
Item #: 14284 -

Used Under-dash Wiring Harness Plastic Cover / Clip for the 1969 and 1970 Mercury Cougar or Ford Mustang

Price: $113.85

Buy Details

Availability: Out of Stock
Item #: 15441 -

Kit comes with 4 metal clips, Ford part number C9WY-6510198-A and 10 plastic clips, Ford part number C9WY-6510182-A. Pictured is a complete set of 1969 rocker moulding clips. The 1969 Sports Special and the 1970 uses the same kit minus two metal end clips, if you have a 69 Sports Special or 1970 model please select that option so as to save $25.00. The 1970 aluminum rocker moulding is held by a Phillips screw on the back thus the need for front clips only. It is rare for us to get a set like...

Price: $138.87

Buy Details

Availability: Out of Stock, On Order
Item #: 15440 -

Kit comes with 4 metal clips, Ford part number C9WY-6510198-A and 10 plastic clips, Ford part number C9WY-6510182-A. Pictured is a complete set of 1969 rocker moulding clips. The 1969 Sports Special and the 1970 uses the same kit minus two metal end clips, if you have a 69 Sports Special or 1970 model please select that option so as to save $25.00. The 1970 aluminum rocker moulding is held by a Phillips screw on the back thus the need for front clips only. It is rare for us to get a set like...

Price: $149.85

Buy Details

Availability: Out of Stock
Item #: 19700 -

Good used set with no broken studs or missing tension wires on the metal end clips.

Price: $129.87

Buy Details

Availability: Out of Stock
Item #: 25407 -

1971 - 1973 Mercury Cougar Ford Mustang rectangular clock found optionally in the center console. Used clocks generally do not work after 36 years. These are considered cores. We also offer clocks with modern quartz movements or NOS movements in restored clocks.Ford Part Number: D1ZZ-15000-C. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered...

Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 21-0125 -

C7WY-15000-A 1967 - 1968 Standard Cougar body code 65A or 65C, found optionally in the small center pod of the instrument cluster. Used clocks generally do not work after 40 years. These are considered cores. We also offer clocks with modern quartz movements or NOS movements in restored clocks. Check out the videos below on our new gauge tester and the "Cougar Dash Surgery Clock and Speaker Install by Andrew Chenovick: ...

Price: $299.88

Buy Details

Availability: Out of Stock
Item #: 20414 -

New in box original FoMoCo. 1969-70 Standard model Cougars. Part number C9WY-15A000-ACheck out the video below on our new gauge tester: ...