Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3697-3744 of 13234
$0 Price: $90.95

Buy Details

Availability: Out of Stock
Item #: 41634 -

These correct floor pan patches are for the 1969-70 convertible and do not have drain plugs like the 1967-68 panels. These are made from a really rigid steel and do not easily bend or dent easily like many of the offshore pans you find on the market. These 20 gauge panels are 24" long and 15 1/4" wide. Great for the person doing a "Correct" restoration on their 1969-70 Cougar / Mustang / Shelby.

$0 Price: $73.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 41906 -

This piece runs under the floor over the transmission where the floor pan meets the firewall.

$0 Price: $60.89

Buy Details

Availability: In-Stock Item
Item #: 41640 -

Reproduction driver side (left hand) floor pan to cowl side panel for Mercury Cougar and Ford Mustang. Normal 0 false false false EN-US X-NONE X-NONE Here's our little film to help you fortify your car! ...

MSRP:$230.00
$230.00 Price: $178.33

Buy Details

Availability: In-Stock Item
Item #: 11341 -

Good quality reproduction shifter assembly for all 1967-68 Mercury Cougar and Ford Mustang with consoles. NOTE: This assembly does not come with the lower bushing.

$0 Price: $2.95

Buy Details

Availability: In-Stock Item
Item #: 26925 -

New fluorescent needle restoration paint for the gauges in your Mercury Cougar or Ford Mustang. Over the years, the sun has wreaked havoc on your Cat or Pony. This sun damage has also had it's way with the needles on you gauges and washed them out. This true fluorescent paint will not only make your needles look factory fresh, but will also bring back their glow at night. One jar contains 2.25ml worth of paint.

$0 Price: $545.85

Buy Details

Availability: Restored / Remanufactured
Item #: 33168 -

Remanufactured OEM Ford Boss 429 and 429 Cobra Jet manual transmission flywheel. Stamped C9AE-C. New ring gear, resurfaced clutch surface. No visible issues, no discoloration from heat. 1971 Mercury Cougar and Ford Mustang, 1970-71 Ford Torino and Mercury Cyclone and variants. 1969-70 Boss 429. Ford part number C9AE-6375-C.

$0 Price: $252.83

Buy Details

Availability: In-Stock Item
Item #: 11343 -

New manufactured flywheel for manual transmissions. Fits all 1967-68 Mercury Cougar and Ford Mustang with 289 engines with 3 or 4 speed manual transmissions. This flywheel has a 157 tooth ring gear. This flywheel will fit many other Ford small block V-8's with the 157 tooth gear.*Note - Most 1968 and newer Cougars came with 164 tooth flywheels, and they are not compatible.

MSRP:$195.00
$195.00 Price: $187.88

Buy Details

Availability: Rare / NOS Part
Item #: 11896 -

This NOS XR7-G Lucas light lens replacement is a later version that were made by Lucas. They are more correct than the version you will see that are marked "Foreign Glass" but technically not 100% correct in that the say "Made In England" and are marked E11. The originals said "England" in larger letters and did not have the E11 marking. ...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12139 -

This is the foil insert / decal found on a non XR7 Cougar. It's located just below the center rectangular dash vent / register. It measures 6" X 3/8".

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 10058 -

This is a much cheaper version of the foil sound deadeners and underlays we sell. This particular insulation is basically bubble wrap with two layers of foil on both sides. Good for insulating headliners, floor pans, trunk areas, door panels, kick panels and just about anything else you might want to use it for. This insulation comes in a 48" X 72" roll. Just grab a pair of scissors and cut your shapes. You can use any adhesive you like (contact cement or weatherstrip adhesive,...

$0 Price: $134.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24217 -

C7ZB-17664-A Foot operated electric wiper actuating device for engaging the windshield washer pump or to cycle your windshield wipers once manually in light rain. Ford MPC number C7ZZ-17664-A. For any 1967 - 1968 Mercury Cougar and Ford Mustang.NOTE: If your electrical points are fried, you can simply replace them with the used contact replacement kit.Please note the Core deposit ...

$0 Price: $1.75

Buy Details

Availability: Out of Stock
Item #: 26665 -

Windshield Washer Pump Pedal Pad for 1967-1968 Mustang & Cougar. Keep your foot from sliding off the pedal with this Injection-molded rubber pad with vertical grooves just like original. This pad was used on models with a floor mounted washer pump pedal. (7664A) This is almost always missing off of the end of your foot operated washer pump. Replaces Ford part number C7ZZ-17664-A. We also have good used pumps in stock.Thanks for the plug Mark!: My first deal with Don was clear back in the 1980s...

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 10863 -

Reproduction rubber bumper that mounts to the metal axle snubber on Ford nine inch rear ends on 1967 - 1968 Mercury Cougar and Ford Mustangs. New part with a fine threaded stud, also called a pinion bumper. The correct casting number is seen on this rubber axle bumper is C3AA-4906-C, this version has fine threads. The version most often seen on the 1969-70 is C9OA-4906-A. It will have a course threaded mounting stud.

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 10864 -

Reproduction rubber bumper that mounts to the metal axle snubber on Ford nine inch rear ends on 1969 - 1970 Mercury Cougar and Ford Mustangs. New part with a course threaded stud, also called a pinion bumper. The correct casting number is seen on this rubber axle bumper is C9OA-4906-A, this version has course threads. The version most often seen on the 1967-68 is C3AA-4906-C. It will have a fine threaded mounting stud.

MSRP:$24.99
$24.99 Price: $20.45

Buy Details

Availability: In-Stock Item
Item #: 32673 -

This USB flash drive contains the electronic collection of the 64 - 71 Ford Car and Truck Technical Service Bulletins (TSB) released from October 19th 1964 through September 10th 1971. Technical service bulletins are official communications between Ford and their dealerships that describe processes for troubleshooting or fixing certain common problems. TSB's document recommended procedures for repairing vehicles, when there are several occurrences of an unanticipated problem. TSB's can range...

$0 Price: $15.60

Buy Details

Availability: Out of Stock
Item #: 33001 -

NOS pamphlet from the Ford Motor Company detailing the 24 month 24,000 mile, or 5 year 50,000 mile warranties for the line of 1967 Cars and light trucks including Falcon, Mustang, Cougar, Ranchero, Fairlane, Thunderbird, Bronco, Light Trucks, Comet, Continental and Econoline.Volume 67C16L6

$0 Price: $659.88

Buy Details

Availability: In-Stock Item
Item #: 31038 -

Set of four in the box, no blemishes.Ford part number C8OZ-1130-COther Applications: Torino Fairlane Ranchero

$0 Price: $242.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18949 -

Very clean, original condition. Same as Cougar but you would have to bore holes in it for the top pad to use on the 1967 standard or 1967 - 1968 XR7 Cougar.

$0 Price: $32.75

Buy Details

Availability: In-Stock Item
Item #: 20135 -

Reproduction passenger side (right hand) inner front frame patch for Mercury Cougar and Ford Mustang.

$0 Price: $99.77

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31625 -

Reproduction pair of frame rail / floor supports. These extend off the back of the front frame rail and give support under the front floor pan. Includes driver and passenger sides.

$0 Price: $114.55

Buy Details

Availability: In-Stock Item
Item #: 30471 -

Reproduction pair of frame rail / floor supports. These extend off the back of the front frame rail and give support under the front floor pan.Includes driver and passenger sides.

$0 Price: $29.15

Buy Details

Availability: Out of Stock
Item #: 13730 -

Reproduction driver side (left hand) inner front frame patch for Mercury Cougar and Ford Mustang. Will work for both coupe and convertible. Check out our video on front suspension and chassis upgrades below:

$0 Price: $29.15

Buy Details

Availability: Out of Stock
Item #: 13731 -

Reproduction passenger side (right hand) inner front frame patch for the Mercury Cougar or Ford Mustang. Will work for both coupe and convertible. Check out our video on front suspension and chassis upgrades below:

$0 Price: $29.15

Buy Details

Availability: Out of Stock
Item #: 42394 -

Reproduction driver side (left hand) outer front frame rail patch for Mercury Cougar and Ford Mustang. The outer rail has weld nuts installed for proper installation.

$0 Price: $31.37

Buy Details

Availability: In-Stock Item
Item #: 31997 -

Brass and steel freeze plug or expansion plug set for any Ford 351C engine. 1970-74 Mercury Cougar and 1970-73 Ford Mustang. 12 piece set with threaded screw in plugs as shown. 

$0 Price: $17.35

Buy Details

Availability: In-Stock Item
Item #: 31999 -

Brass and steel freeze plug or expansion plug set for any Ford 429 / 460 / 429CJ engine. 1971 Mercury Cougar and 1971 Ford Mustang. 13 piece set with threaded screw in plugs as shown. 

$0 Price: $8.35

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 32007 -

Steel freeze plug or expansion plug set for any Ford 429 / 460 / 429CJ engine. 1971 Mercury Cougar and 1971 Ford Mustang. 13 piece set with threaded screw in plugs as shown. 

$0 Price: $11.12

Buy Details

Availability: In-Stock Item
Item #: 32006 -

Steel freeze plug or expansion plug set for any Ford 390 / 427 / 428CJ engine. 1967-70 Mercury Cougar and 1967-70 Ford Mustang. 17 piece set with threaded screw in plugs as shown. 

$0 Price: $47.25

Buy Details

Availability: In-Stock Item
Item #: 31998 -

Brass and steel freeze plug or expansion plug set for any Ford 390 / 427 / 428CJ engine. 1967-70 Mercury Cougar and 1967-70 Ford Mustang. 20 piece set with threaded screw in plugs as shown. 

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0069 -

Used fresh air vent found in the driver side kick panel of all 1969-70 Mercury Cougar and Ford Mustang with or without air conditioning. Please also see the listing for new gaskets for installation.Replaces Ford part number C9ZZ-6501935-A.

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0071 -

Used fresh air vent found in the driver side kick panel of all 1971-73 Mercury Cougar without air conditioning. Replaces Ford part number D1WY-6501935-A.

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0067 -

Used fresh air vent found in the passenger side kick panel of all 1969-70 Mercury Cougar and Ford Mustang with or without air conditioning. Please also see the listing for new gaskets for installation.Replaces Ford part number C9ZZ-6501934-A.

$0 Price: $118.25

Buy Details

Availability: In-Stock Item
Item #: 41949 -

Complete air vent assembly with cable, knob and bracket ready to bolt to your cowl. Replaces Ford Part # : C7ZZ-6501934-A

$0 Price: $48.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0014 -

Our good used vents will not have cracks in the plastic or a rusty flapper from a leaking cowl. These are the same for AC and non AC.Replaces Ford part number C7ZZ-6501935-A.

$0 Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15473 -

Often the cowl will leak water down to your fresh air vents behind the kick panels causing rust to form around the perimeter. Please choose which side you need.

$0 Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15472 -

Often the cowl will leak water down to your fresh air vents behind the kick panels causing rust to form around the perimeter. Please choose which side you need.

$0 Price: $23.64

Buy Details

Availability: In-Stock Item
Item #: 41740 -

Great for that missing or rusted ashtray in the front of your console. Nice snug fit and correct hole for light. Replaces Ford Part #: C9ZZ-6504788.

$0 Price: $421.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19016 -

Core bench seat for the 1967 Mercury Cougar or Ford Mustang equipped with decor interior. The foam almost will always be deteriorating or even missing. All seat cores will be solid frames taken from a Western parts car. Seat tracks are sold separate.

$0 Price: $818.80

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33840 -

This system features the "Original" Baer 2-piston, pad guided caliper (PGC) mounted to a 11.29", 1-piece slot, drill, zinc plated integral hub rotor. The PGC caliper comes in a red powder coated finish with a black logo, includes dust/weather seal's and uses the popular D412 pad type. The system includes premium bearings with races pre-installed, dust caps, mounting brackets, stainless braided hoses and all necessary hardware. The 11.29" "Classic" system fits select 14" and most 15" or larger...

$0 Price: $818.80

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33842 -

This system features the "Original" Baer 2-piston, pad guided caliper (PGC) mounted to a 11.29", 1-piece slot, drill, zinc plated integral hub rotor. The PGC caliper comes in a red powder coated finish with a black logo, includes dust/weather seal's and uses the popular D412 pad type. The system includes premium bearings with races pre-installed, dust caps, mounting brackets, stainless braided hoses and all necessary hardware. The 11.29" "Classic" system fits select 14" and most 15" or larger...

$0 Price: $1,024.80

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33841 -

This system features the "Original" Baer 2-piston, pad guided caliper (PGC) mounted to a 13", 1-piece slot, drill, zinc plated integral hub rotor. The PGC caliper comes in a red powder coated finish with a black logo, includes dust/weather seal's and uses the popular D412 pad type. The system includes premium bearings with races pre-installed, dust caps, mounting brackets, stainless braided hoses and all necessary hardware. The 13" "Classic" system fits select 17" or larger wheels....

$0 Price: $1,024.80

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33843 -

This system features the "Original" Baer 2-piston, pad guided caliper (PGC) mounted to a 13", 1-piece slot, drill, zinc plated integral hub rotor. The PGC caliper comes in a red powder coated finish with a black logo, includes dust/weather seal's and uses the popular D412 pad type. The system includes premium bearings with races pre-installed, dust caps, mounting brackets, stainless braided hoses and all necessary hardware. The 13" "Classic" system fits select 17" or larger wheels....

$0 Price: $10.35

Buy Details

Availability: In-Stock Item
Item #: 41120 -

Reproduction Front Bumper Guard Bolts & J Nuts for the 1967 - 1968 Mercury Cougar 

$30.00 Price: $54.75

Buy Details

Availability: In-Stock Item
Item #: 41798 -

All new disc brake pads are supplied to us by brand name manufacturers. Boxed set of four pads. Semi-Metallic linings. Kelsey Hayes Brake caliper system.