Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 7681-7728 of 13234
$0 Price: $137.88

Buy Details

Availability: In-Stock Item
Item #: 25932 -

This an original, rebuilt power steering slave / ram cylinder. It has not had a cosmetic restoration so it will show external dings, scrapes and general wear associated with a 50 year old part located on the bottom of a car. If you buy our reproduction ram do not throw away your core used ram as we often can give in store credit for the part. RAM DUST BOOT SOLD SEPARATELY.Replaces Ford Part #: C7ZZ-3A540-A.

$0 Price: $69.15

Buy Details

Availability: In-Stock Item
Item #: 32324 -

Quality complete rebuild kit, includes all hardware shown. Premium flexible rubber boot that has vent holes, boot for elbow, and all hardware designated by an experienced rebuilder for completeness. This is the best known kit on the market.

$0 Price: $14.55

Buy Details

Availability: In-Stock Item
Item #: 10661 -

Reproduction driver side (left hand) rear apron extension for Mercury Cougar and Ford Mustang.

$0 Price: $13.25

Buy Details

Availability: In-Stock Item
Item #: 10662 -

Reproduction passenger side (right hand) rear apron extension for Mercury Cougar and Ford Mustang.

$0 Price: $41.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32081 -

Passenger side chassis bumper bracket for the rear axle. Passenger side as removed from a 1967-73 Mercury Cougar. Good condition bracket, road tested, but not salt road tested. Ships as shown, cut with generous margins around the original bracket.

$0 Price: $41.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32080 -

Driver side chassis bumper bracket for the rear axle. Passenger side as removed from a 1967-73 Mercury Cougar. Good condition bracket, road tested, but not salt road tested. Ships as shown, cut with generous margins around the original bracket.

$0 Price: $7.15

Buy Details

Availability: In-Stock Item
Item #: 26596 -

Reproduction rear axle outer bumper for the Mercury Cougar or Ford Mustang. These units mount on frame rail, are push in and two are required per car. Sold as a pair. Replaces Ford part # C6AZ-4730.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25436 -

This 1 degree wedge properly sets the pinion angle for the drive shaft.The Mercury Parts Catalog states that this part is installed "As Required".Orientation: Narrow end towards the front of the car.

$0 Price: $27.86

Buy Details

Availability: Out of Stock
Item #: 25437 -

This 1.5 degree wedge properly sets the pinion angle for the drive shaft.The Mercury Parts Catalog states that this part is installed "As Required".Sold individually, two required per vehicle.Orientation: Narrow end towards the front of the car.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25438 -

This 2 degree wedge properly sets the pinion angle for the drive shaft.The Mercury Parts Catalog states that this part is installed "As Required".Orientation: Narrow end towards the front of the car.

$0 Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24182 -

This 3 degree wedge properly sets the pinion angle for the drive shaft. This is a Cougar specific part which is needed due to the longer than normal rear leaf spring length. There are other wedges, but we seldom see them. This 3 degree marked wedge is the most prolific one. Feel secure in using these as a replacement.  Sold individually, two required per vehicle. Orientation: Narrow end towards the front of the car.

$0 Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24205 -

These are bolted to the rear frame rails and were used to tie the car down to the transporter for the journey from the factory to the dealer. The dealer was supposed to remove them and return them for a credit as instructed by the dealer. Notice the sticker on the rear license plate frame (decal is available in the decal section)? Many sets slipped through as the dealers often forgot or did not deem the small credit back worth their effort to remove. These are great for transporting your car...

$0 Price: $28.89

Buy Details

Availability: In-Stock Item
Item #: 41109 -

Reproduction Rear Bumper Guard Bolts & U Nuts for the 1968 Mercury Cougar 

MSRP:$35.00
$35.00 Price: $26.45

Buy Details

Availability: In-Stock Item
Item #: 26074 -

This is very close to being an exact reproduction. Only two things differ, the upper lip on the bezel is different in that the originals had a smaller lip on the top and this reproduction is the same on all four sides. The second difference is that the contour of the upper edge of the tray itself is not as crisp as the original and the catch has no roller but what an improvement over your rusted filthy unit! Nobody is ever going to notice but since I can see a difference when I put side by...

$0 Price: $29.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31575 -

Used rear console support bracket for the 70 Cougar or Mustang. Mounts under the leading edge of the storage compartment under the console.NOTE - 69 and 70 used different brackets

$0 Price: $608.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11261 -

For deck / trunk lids it is all about rust under the inner rear lip... We still check it over good for excessive filler, correct contour on all the lines and hidden rust under the weather strip. We ship deck / trunk lids with several layers of thick cardboard and insure them for the full amount. Keep in mind shipping is free if you order at the same time as a hood, door or quarter panel. For those wanting a cleaner look on their 1967-68 Cougar a 69-70 deck / trunk lid will bolt right on with...

$0 Price: $629.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11263 -

For deck / trunk lids it is all about rust under the inner rear lip... We still check it over good for excessive filler, correct contour on all the lines and hidden rust under the weather strip. We ship deck / trunk lids with several layers of thick cardboard and insure them for the full amount. Keep in mind shipping is free if you order at the same time as a hood, door or quarter panel. For those wanting a cleaner look on their 1967-68 Cougar a 69-70 deck / trunk lid will bolt right on with...

$0 Price: $729.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27192 -

For deck / trunk lids it is all about rust under the inner rear lip... We still check it over good for excessive filler, correct contour on all the lines and hidden rust under the weather strip. We ship deck / trunk lids with several layers of thick cardboard and insure them for the full amount. Keep in mind shipping is free if you order at the same time as a hood, door or quarter panel. For those wanting a cleaner look on their 1967-68 Cougar a 69-70 deck / trunk lid will bolt right on with...

$0 Price: $600.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27193 -

Late 1971 (4-1-1971) through mid late 1972 Mercury Cougar, approximate cutoff is 3-1-1972. Look for two different things to differentiate the trunk lids. First is the spacing on the bolts to the hinges. This style has a 4-1/4 inch spacing, early 1971 deck or trunk lids have a 3 inch spacing on those hinge bolts. The seconde is the style of deck / trunk lock cylinder attachment. D1WY-40110-B style has the internal style of keeper for the trunk lock cylinder. These deck / trunk lids do not have...

$0 Price: $600.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 71309 -

1971 until about 4-1-1971 Mercury Cougar. Look for the spacing on the bolts to the hinges. This style has a 3 inch spacing, late 1971-72 deck or trunk lids have a 4-1/4 inch spacing on those hinge bolts. D1WY-40110-A style has the internal style of keeper for the trunk lock cylinder. For deck / trunk lids it is all about rust under the inner rear lip... We still check it over good for excessive filler, correct contour on all the lines and hidden rust under the weather strip. Keep in mind we...

$0 Price: $185.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14524 -

Late 1968 Mercury Cougar trunk lid, identified by having the large square hole for installing the trunk lock and latch parts. This style is hard to keep in stock, please see the 1967-68 version in the related section. Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that...

$0 Price: $315.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27200 -

Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We have some "B" rated deck / trunk lids with dents on the top side and no rust, so call 503-463-1130 if you have a preference. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that at least "some" pin holes will appear after you have blasted the underside. Make sure to...

$0 Price: $185.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14523 -

Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that at least "some" pin holes will appear after you have blasted the underside. Make sure to click onto our "after" shot to see what you should expect to see after you have bead blasted the underside of one of our "B"...

$0 Price: $315.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14525 -

Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We have some "B" rated deck / trunk lids with dents on the top side and no rust, so call 503-463-1130 if you have a preference. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that at least "some" pin holes will appear after you have blasted the underside. Make sure to...

$0 Price: $185.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27197 -

Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We have some "B" rated deck / trunk lids with dents on the top side and no rust, so call 503-463-1130 if you have a preference. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that at least "some" pin holes will appear after you have blasted the underside. Make sure to...

$0 Price: $315.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27198 -

Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We have some "B" rated deck / trunk lids with dents on the top side and no rust, so call 503-463-1130 if you have a preference. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that at least "some" pin holes will appear after you have blasted the underside. Make sure to...

$0 Price: $315.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 53253 -

Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We have some "B" rated deck / trunk lids with dents on the top side and no rust, so call 503-463-1130 if you have a preference. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that at least "some" pin holes will appear after you have blasted the underside. Make sure to...

$0 Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 17764 -

Used trunk or luggage compartment latch, fits all 1967-73 Mercury Cougar and many other Ford and Mercury cars. Comes with 3 bolts for mounting.Replaces Ford part number C5AZ-6243200-A.

$0 Price: $506.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31648 -

Reproduction deck lid for the 67-68 Cougar. Exact reproductions of the originals, these deck lids are well fitting and are a perfect replacement for your old rusty lid.  Does not include hardware or lock cylinder, shipped bare. Here's the installation kit for these reproduction deck lids. Keep in mind that this is an oversized package and will most likely have to be shipped through truck freight. Expect to pay up to $250 in shipping charges. ...

$0 Price: $506.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31892 -

Reproduction deck lid for the 69-70 Cougar. Exact reproductions of the originals, these deck lids are well fitting and are a perfect replacement for your old rusty lid.  Does not include hardware or lock cylinder, shipped bare. Here's the installation kit for these reproduction deck lids. Keep in mind that this is an oversized package and will most likely have to be shipped through truck freight. Expect to pay up to $250 in shipping charges. ...

$0 Price: $124.29

Buy Details

Availability: In-Stock Item
Item #: 13478 -

Reproduction front diaphragm for your 67 - 69 Cougar or Mustang Midland power brake booster.Diameter 7 1/4"

$0 Price: $5.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32032 -

Driver side rear brake cable bracket. This is a part cut from a car, some trimming and or spot welds will need to be removed prior to installation. Fits all 1970-71 Mercury Cougar and Ford Mustang.

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12206 -

Passenger side rear brake cable bracket. This is a part cut from a car, some trimming and or spot welds will need to be removed prior to installation. Fits all 1967-69 Mercury Cougar and Ford Mustang.

$0 Price: $31.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32033 -

Passenger side rear brake cable bracket. This is a part cut from a car, some trimming and or spot welds will need to be removed prior to installation. Fits all 1970-71 Mercury Cougar and Ford Mustang.

$0 Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 15484 -

Reproduction driver side rear extended floor pan for the 67 - 68 Cougar or Mustang. NOTE: This quality pan can be modified to fit a Cougar, but is designed for the Mustang. You can see in the picture above that when being installed on the Cougar, there will be a sizeable gap along the wheel well. We also carry used patches to fill those gaps ...

$0 Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 15485 -

Reproduction passenger side rear extended floor pan for the 67 - 68 Cougar or Mustang. NOTE: This quality pan can be modified to fit a Cougar, but is designed for the Mustang. You can see in the picture above that when being installed on the Cougar, there will be a sizeable gap along the wheel well. We also carry used patches to fill those gaps. ...

$0 Price: $100.05

Buy Details

Availability: In-Stock Item
Item #: 12817 -

Good for all 71-73 Cougars and Mustangs. This extension extends from the driver side rear fender apron to the top of the cowl.This rear fender apron extension is a great choice for your damaged, rusted or missing panel. Made from stamped steel, just like the original. The extension fits in place between the passenger side rear fender apron and the top of the cowl. It provides for a sturdy, stable mounting area for the far rear top fender bolt and the rear hood hinge bolts. ...

$0 Price: $100.05

Buy Details

Availability: In-Stock Item
Item #: 12122 -

Good for all 71-73 Cougars and Mustangs. This extension extends from the passenger side rear fender apron to the top of the cowl.This rear fender apron extension is a great choice for your damaged, rusted or missing panel. Made from stamped steel, just like the original. The extension fits in place between the passenger side rear fender apron and the top of the cowl. It provides for a sturdy, stable mounting area for the far rear top fender bolt and the rear hood hinge bolts. ...

$0 Price: $225.77

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32615 -

Driver side, rear frame rail, from a 1969 and 1970 Mercury Cougar hard top. Full length, we cut so that there is some remaining metal on the edges. Ford part number C9WY-6510125-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size", unless you pick up in person. ** Note - Convertible is different.

$0 Price: $52.75

Buy Details

Availability: In-Stock Item
Item #: 41633 -

Reproduction driver side rear inner apron for both the Mercury Cougar and Ford Mustang.

$0 Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 41686 -

Stamped steel driver side (left hand) rear inner apron for the Mercury Cougar or Ford Mustang.Here's a little film to help you fortify your flexxy feline!

$0 Price: $43.65

Buy Details

Availability: In-Stock Item
Item #: 19680 -

Reproduction stamped steel driver side (left hand) rear inner apron for Mercury Cougar or Ford Mustang.

$0 Price: $52.75

Buy Details

Availability: In-Stock Item
Item #: 41629 -

Reproduction passenger side rear apron for Mercury Cougar and Ford Mustang.Here's a little film to help you fortify your flexxy feline!