Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 241-288 of 13234
$0 Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 14-0024 -

New adhesive / epoxy applicator to apply our 3M window adhesive to the glass (or whatever else needs bonding) in your Mercury or Ford. This non-drip unit features an easy loading breech, a 1:1 mixing ratio and full cartridge support. We also offer a 60 day loaner if you only need this unit for a short time. ...

$0 Price: $69.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33153 -

Set of 8 fine threaded Phillips screw assemblies. This the mechanism in which to adjust your headlights up or down, left or right. There are two units per bulb for a total of eight per car. The new screws that mount them to the grille are included at no extra cost. They will be in perfect working order and not rusty as we only keep the best examples. Two versions for 1967-68, the most common has the square corners and is rectangular, the other supplier had clipped corners as shown in the...

$0 Price: $9.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20024 -

This fine threaded Phillips screw assembly is the mechanism in which to adjust your headlights up or down, left or right. There are two units per bulb for a total of eight per car. The two new screws that mount them to the grille are included at no extra cost. They will be in perfect working order and not rusty as we only keep the best examples. Two versions for 1967-68, the most common has the square corners and is rectangular, the other supplier had clipped corners as shown in the comparison...

$0 Price: $0.98

Buy Details

Availability: In-Stock Item
Item #: 30880 -

This stepped window trim clip is great for times when your stainless trim just will not click into place. We have found that the reproduction cougar rear window gasket is a little taller than OEM and this adjustable clip allows you to compensate. Another instance this multi-fit clip works is when someone has replaced one or more nail-heads that the clip fastens to and located them in the wrong place.Sold Individually.These clips attach to posts built in to the car. In case you're missing some...

$59.99 Price: $61.85

Buy Details

Availability: In-Stock Item
Item #: 26202 -

The Proper ignition advance curve is vital for maximum performance, economy (gas mileage) and drive-ability. Ford / Mercury owners had few acceptable choices with regard to adjusting the vacuum curve with their OEM distributor. You could fumble with the stock washers, fiber stops and springs (a hit-or-miss exercise in frustration!) or you could spend the money on an adjustable after market vacuum advance that looks completely out of place and cost you major judging points. This works on any...

$0 Price: $58.18

Buy Details

Availability: In-Stock Item
Item #: 41758 -

Economy Small Block Powering Steering Adjustment Bracket. Lighter weight material than OEM. Replaces Ford Part #: C7SZ-3A732-A.

$0 Price: $76.36

Buy Details

Availability: In-Stock Item
Item #: 13791 -

Perfect fit for your 289, 302, or 351w with or without AC but a hard sell when our good used rust free brackets cost less . . .

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23834 -

Used alternator adjusting bracket for early 1967 Mercury Cougar or 1965-67 Ford Mustang with 289 V-8 engines. Very early style which is a carryover from the 1965-66 289 alternator bracket. The difference of this C5AE-10145-A alternator bracket and the C7OE-10145-A bracket is the C7OE bracket has a slightly rounded off end to prevent contact with some of the larger diameter water pump pulleys. To be safe, we recommend the C7OE-10145-A bracket for clearance purposes. Ford part number...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24044 -

Used alternator adjusting bracket for any 1967-68 Mercury Cougar or 1967-68 Ford Mustang with 289 or 302 V-8 engines. C7OE-10145-A stamped bracket has a slightly rounded off end to prevent contact with some of the larger diameter water pump pulleys from previous years. Ford part number C7OE-10145-A.*Trivia - All 3 small block alternator adjusting brackets from 1965-1969 will fit most all 289 / 302 / 351W engines unless your engine has one of the larger pulleys. ...

$0 Price: $25.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25553 -

Ford started using this alternator adjusting bracket sometime in 1973. It mounts to the rear of the alternator. Fits any 1973 Mercury Cougar and Ford Mustang and likely many other Ford cars with 351 engines. It works with the 1970-73 front mounting bracket. Replaces Ford part number D3AE-10145-C.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24595 -

Used alternator adjusting bracket for any 1969 Mercury Cougar or Ford Mustang with 351W V-8 engines. This C9OE-10145-A stamped bracket is correct for all H or M code 351 Windsor engines. Will also fit 1969 F code 302 Ford engines too.Ford part number C9OE-10145-A.*Trivia - All 3 small block alternator adjusting brackets from 1965-1969 will fit most all 289 / 302 / 351W engines unless your engine has one of the larger pulleys. ...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24331 -

Used alternator adjusting bracket for any 390 engine 1968-69 Mercury Cougar or Ford Mustang without factory smog. Specifically this is for 1968 390-2V or X code engines, and 1969 390-4V or 390IP engines offered in 1969 cars with S code designation. Replaces Ford part number C8AE-10145-A.This is the 411 for 1968-69 alternator mounting on Mustang and Cougar with 390 engines. If your 1968 S code car (390GT or 390-4V) was delivered in the United States (meaning not Canada or other foreign...

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25101 -

Alternator adjusting bracket found on 429 engines. Not technically correct for 1970-71 429CJ engines, this is the passenger car version. The true 429CJ alternator bracket is slightly different and extremely hard to find. This is a very good and economical substitute. Has Ford part number D0SE-10145-A stamping.

$0 Price: $28.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23937 -

Application is 1967 - 1968 289/302 and 1969 Boss 302 Eliminator alternator adjusting with factory air injection emissions. Casting number C6OE-10145-A, Ford part number C6OZ-10145-A.

$0 Price: $119.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23901 -

Application is 1967 390 with California emissions. Casting number C6AE-10145-A. Ford part number C6AZ-10145-A.

$0 Price: $259.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24342 -

C8AE-9B452-B Thermactor smog pump belt tensioning adjustment bracket. Application is for all 1968 - 1970 FE engines with factory installed thermactor smog systems.

$0 Price: $250.00

Buy Details

Availability: In-Stock Item
Item #: 30885 -

Reproduction thermactor smog pump adjusting bracket for all 1968 Mercury Cougar and 1968 Ford Mustang with S code 390-4V engines. Additionally this bracket was also used on 1968-70 Mercury Cougar and Ford Mustang with 428 Cobra Jet engines. Quality made product. Ford number C8AE-9B452-B.

$0 Price: $275.00

Buy Details

Availability: In-Stock Item
Item #: 30887 -

Reproduction thermactor smog pump adjusting bracket for all 1970 Mercury Cougar Eliminator and 1970 Ford Mustang with Boss 302 engines. Quality made product. Replaces Ford part number D0ZE-9B452-A. We also have one copy of an earlier reproduction version without the stamped  D0ZE-9B452-A, on the part. Call 503-436-1130, will be sold at a good discount, just ask.

$0 Price: $79.96

Buy Details

Availability: Out of Stock, On Order
Item #: 10487 -

This high performance alignment kit replaces the factory eccentric bolt and cam that holds the lower control arm to the frame. The eccentric cam is used for setting wheel camber. When the eccentric is turned, the lower arm moves in or out changing camber. Stock eccentric cams can slip or rotate going over bumps, allowing the alignment to change. Which is the cause of many worn tires. The lower control arm adjusting cam eliminator kit replaces the eccentric bolt and cam with non slipping...

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30483 -

This knurled nut is located under the front slides in each corner (1 per side, 2 per car) and is used to adjust the height of the sun roof panel.

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23391 -

384543-S8 Power steering pump adjusting spacer for use without air conditioning. For most 1970 - 1973 Mercury Cougar or Ford Mustang with 351C engines. Spacer dimensions: 7/16" I.D. and 1/2" thick.*Note 1970 and later cars with 302 or 351W engines use a 3/4 inch spacer.

$0 Price: $31.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23390 -

384542-S2 Power steering pump adjusting spacer for use without air conditioning. For all 1970 and later Mercury Cougar or Ford Mustang with 302 or 351W engines. Spacer dimensions: 7/16" I.D. and 3/4" thick.*Note - 351C engines use a 1/2 inch spacer.

$0 Price: $69.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33152 -

Set of 8 1969-1970 Headlamp adjusting screw. Two per bulb, eight in all per car, comes with two new mounting screws. This part is identified by the clipped corners. Also used during 1967 and 1968 on a limited basis. Will be in good rust free condition as we only keep the best examples. Also sold individually.

$0 Price: $9.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19333 -

1969-1970 Headlamp adjusting screw. Two per bulb, eight in all per car, comes with two new mounting screws. This part is identified by the clipped corners. Also used during 1967 and 1968 on a limited basis. Will be in good rust free condition as we only keep the best examples.Also sold in a set of 8. ...

$0 Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20025 -

This bolt is what adjusts your headlamp cover height. Many people do not know they can rid themselves of that droopy eye look (misaligned grille) by placing new rubber pads on the heads of these bolts and adjusting them. Four required per car, sold individually. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! Check out this video ...

$0 Price: $19.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30251 -

This bolt is what adjusts your headlamp cover height. Rare find to still have an original rubber bumper in place that is not compressed or cracked. Four required per car, sold individually. Check out this video

$0 Price: $2.61

Buy Details

Availability: Rare / NOS Part
Item #: 26804 -

Ford Part # 379390-s Sold individually

$0 Price: $12.47

Buy Details

Availability: Out of Stock
Item #: 26066 -

Includes a pair of chrome screw adjusters, nuts and washers, heavy duty plastic rest plates and attaching screws to repair or replace that missing seat back adjustment.Replaces Ford Part #: C1DZ-6461643

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10491 -

Ford called this part a 'sleeve'. Attaches to the lower shifter arm with a hitch pin. Has nice bushing, with correct nut, washer, and pin. The 1967/68 and 1969/73 versions are identical. The C1AA-7353-C sleeve has fine threads, the C9OZ-7353-A has course threads. Fits all 1967-73 Mercury Cougar and Ford Mustang, and we suspect many other Ford vehicles beginning in 1961. Check out our video on rebuilding your shifter below: ...

$0 Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24393 -

C8OA-3B236-A Complete lower control arm cam and attaching bolt. 4 pieces included - Cam/bolt, lower cam, nut and lock washer. We offer this used front suspension lower control arm adjusting cam from rust free Western States cars. These are MUCH better quality than any of the stock "looking" reproductions offered. For use on all 1967 - 1973 Mercury Cougar and Ford Mustangs. Part of the C6OZ-3048-A lower arm mounting kit. Bolt/cam part number C8OA-3B236-A, secondary cam part...

$0 Price: $533.57

Buy Details

Availability: In-Stock Item
Item #: 26882 -

Reproduction 1967 GT concours correct air cleaner assembly with the chrome lid for the Mercury Cougar and Ford Mustang equipped with the 390 engine. Notice that this version does not have the metal elbow on the side for the hose going to the oil fill cap? This is an extremely hard piece to find used and even rarer in NOS form. Now we can offer you this new unit that is made from the original tooling! This reproduction includes a blue base, a chrome lid, and a lid to base rubber gasket. Some...

$0 Price: $482.45

Buy Details

Availability: In-Stock Item
Item #: 26881 -

Reproduction GT style concours correct air cleaner assembly with a chrome lid and California emissions tube for all Mercury Cougars and Ford Mustangs equipped with the 390GT engine. This is an extremely hard piece to find used and even rarer in NOS form. Now we can offer you this new unit that is made from the original tooling! This reproduction includes a blue base, a chrome lid, and a lid to base rubber gasket. This is also an excellent stock appearing performance upgrade for the very...

$0 Price: $125.35

Buy Details

Availability: In-Stock Item
Item #: 15704 -

This air cleaner assembly never came from the factory on any Cougar, but was an over the counter option available from your Ford dealer. If you have a very nice hood blanket I would think twice before using it in conjunction with this air cleaner assembly as it will leave an imprint. To avoid this problem with small block cars you can use a lower profile carburetor spacer, but on big block cars this is not an option due to the already thin design of the factory carburetor spacer. This will...

$0 Price: $172.45

Buy Details

Availability: In-Stock Item
Item #: 11975 -

Reproduction Group II customizable oval air cleaner with the optional "Walking Cat" for your Mercury Cougar. Good quality reproduction that will go nicely with our Cougar aluminum valve covers. The finish on the black portion is not the same as the crinkle finish on the valve covers but do know the crinkle finish can be added with an aerosol product found from most paint suppliers. If you are using a vented oil filler cap you will need to drill a hole in the base to insert the rubber...

$95.00 Price: $108.77

Buy Details

Availability: In-Stock Item
Item #: 26025 -

This 'Cal Custom' style 14" Air Cleaner Assembly looks great and really compliments our new matching oil pan and valve covers. These covers offer a true "old school" look. Clean look with no visible mounting nut. Lid has a 1/4x20 nut attached on the bottom side (requires shortening carburetor stud). Kit includes aluminum finned top, air filter, and bottom plate.

$0 Price: $45.86

Buy Details

Availability: In-Stock Item
Item #: 14897 -

This is the exact copy of the high performance air cleaner. This unit features a highly polished chrome top with a dimpled recess for the wing nut and all contours are concours correct. The filter element has the correct orange color and round hole design with the base plate painted in the correct Ford blue and also includes the breather tube. Decal and correct wing nut are optional.  Dimensions: 13 7/8" X 2 1/4" (edge height). Replaces Ford part # C5ZZ-9600. Check out this video ...

$0 Price: $755.80

Buy Details

Availability: In-Stock Item
Item #: 12136 -

Quality reproduction of the 1968 - 1970 CJ Mercury Cougar, 1969 - 1970 Shelby GT500, 1968 - 1969 Cyclone, Ford Fairlane, Ranchero and Torino 428 Cobra Jet Ram Air cleaner base. Features correct snorkel opening and breather elbow.Replaces Ford part number C9ZZ-9600-E or C8ZZ-9600-A.

$0 Price: $538.07

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 12828 -

Brand new exact reproduction of the 1969 Q-Code 428 Cobra Jet non-shaker air cleaner base. Works for Cougars, Mustangs and Fairlanes. Correct snorkel opening, breather port, three mounting studs and a port for the vacuum powered air inlet door. Sold as a stand alone base, does not include snorkel,vacuum motor and door.Ford part number C9ZZ-9600-H 

$0 Price: $9.77

Buy Details

Availability: In-Stock Item
Item #: 14036 -

This screw / stud seems to always be missing. This screw is just a little longer than stock to accommodate installing the Hi-Po air cleaner. Fits most Autolite carburetors. Size: 4 1/8 inches length 1/4-20 X 5/16-18 threads. Check your thread size on the carburetor, we think that starting in 1969 the Autolite 4300 carburetors had 1/4-20 threads. Please note that this stud has 5/16-18 threads going into the carburetor.  Replaces Ford Part #: 370971-A *Note - Check your carburetor, it will...

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26417 -

This is a reproduction of the original orange engine displacement decal with black lettering and black and orange checkerboard on each end that was located on the top of the air cleaner.Fits the following model with a 289 2 barrel engine:1968 Mercury CougarReplaces Ford part# C8DF-9C611-B

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26407 -

This is a reproduction of the original orange engine displacement decal with a black and white checkerboard background on each end. Located on the top of the air cleaner.Fits the following models with a 289 4 barrel engine:1967 Mercury Cougar 1967 Ford Mustang Replaces Ford Part #: C5ZF-9638-D ...

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26348 -

This is a reproduction of the original orange engine displacement decal with a black and orange checkerboard background that was located on the top of the air cleaner.Fits the following models with a 289 4 barrel engine:1967 Mercury Cougar1967 Ford Mustang

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26405 -

This is a reproduction of the white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner.13 11/16" from tip to tip, fits the larger diameter air cleaner available in 1972.Fits the following models with a 351 2 barrel engine: 1972 Cougar 1972 Mustang ...

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26360 -

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner.  11-1/2 inch span, fits the smaller diameter air cleaner available in 1972.Fits the following models with a 351 2 barrel Regular Fuel engine:...

$0 Price: $8.87

Buy Details

Availability: In-Stock Item
Item #: 31684 -

This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner. Fits the following models with a 351 2 barrel Regular Fuel engine: 1973 Cougar 1973 Mustang ...