General (Old Category Structure)

Basic kit for rebuilding your Ford Autolite or Motorcraft spread bore 4300D or 4 barrel carburetor with large secondary venturis. Covers all factory 4 barrel carburetors for all 1972-73 Mercury Cougar and Ford Mustang with Autolite or Motorcraft spread bore 4300 carburetors. Does NOT fit square bore 4300 carburetors.

Lower carburetor gasket for all 1973 Mercury Cougar and Ford Mustang with 351C-2V engines. Lower gasket goes between the stock EGR spacer plate and the stock cast iron intake manifold.

Carburetor gasket for all 1972 Mercury Cougar and Ford Mustang with 351C-2V engines. This is a new gasket meant for use with stock Ford intake manifolds and correct Autolite/Motorcraft 2100 carburetors. Single gasket as shown, if you have a carburetor spacer plate you would need two gaskets.

Upper carburetor gasket for all 1973 Mercury Cougar and Ford Mustang with 351C-2V engines. Upper gasket goes between the stock EGR spacer plate and the stock Motorcraft 2100 carburetor.

Carburetor idle mixture screw caps like originally came on the cars from the factory. Exact reproduction of Ford part number C7AZ-9J500-A. This clip onto the idle mixture screws of any 1967-73 Autolite or Motor Craft carburetor 2100 or 4300. They also will fit the 429 Cobra Jet with Ford numbered Rochester Quadrajet carburetors in 1970-71. Sold as a PAIR.

5/16-24 hex nut 7/16" head that is used to secure the carburetor to the intake manifold. If you need to replace your rusty old studs, we also carry an eight piece kit that contains the studs and nuts. Sold individually. AMK B-12786

This is a set of four 7/16 nuts that are used to secure the carburetor to the intake manifold. If you need to replace your rusty old studs, we also carry an eight piece kit that contains the studs and nuts. 

This is the complete eight piece kit that includes four 7/16 nuts and four studs (1 3/8") which are double threaded. One end is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with NO spacer.

This is the complete eight piece kit that includes four 7/16 nuts and four double threaded studs (2 1/2"). One end of the stud is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with a 1" spacer.

This is the complete eight piece kit that includes four 7/16 nuts and four double threaded studs (1 3/4"). One end of the stud is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with 1/4" to 3/8" spacers.

Replaces Ford part # 351089-S Zinc (dark silver) finish Sold individually

Very nice reproduction stainless steel, carburetor deflector gasket for W code GT-E 427-4V engines. American made stainless steel plate with tabs, copied from an original.  Order of installation: Open gasket #15292, SS plate #31256, Phenolic spacer #41936, paper gasket #11813, Holley 4088 carburetor. Originally the spacer was part of the spacer assembly which had Ford part numbers of:  C8AZ-9A589-C,  Engineering number C8AE-9A589-EFord Technical Service Bulletin using...

Factory cast aluminum two barrel carburetor spacer plate. Positions carburetor above intake manifold for proper linkage operation. With PCV fitting at rear. Fits all Ford 2 barrel carburetors, bore size is 1-5/8 inches in diameter. ...

Nice quality reproduction of the bake-o-lite carburetor spacer plate for all 1966-67 S-code 390-4V engines. Measures 0.28" thick, with small vacuum hose nipple on rear replaces Ford Part Number C6AZ-9A589-B. Fits 67 Cougar 390 Fits 67 Mustang 390 Fits 66 Fairlane 390 Fits 67 Fairlane 390 Fits 66 Cyclone 390 Fits 67 Cyclone 390 Check out this video ...

Measures 0.28" thick, with small vacuum hose nipple on rear Ford Part Number C6AZ-9A589-B. Mint condition original part.

15/16" thick aluminum with 5/8" heater nipples & 5/8" PCV hose nipple on rear. Casting number C9ZE-9A589-A.

Good Quality spacer that measures 1 1/8" tall. Comes with PCV hose clamp and vacuum port cap. This was used on all 289, 302, 351w motors with a 4V carburetor.

Factory cast aluminum four barrel carburetor spacer plate, 1-1/8" tall. Positions carburetor above intake manifold for proper linkage operation. With PCV fitting at rear. *excludes Boss 302 Eliminator ...

New 390 2BBL Carburetor spacer gasket for the 1968 X code 390-2V engine. Two needed per installation, one on both sides of the spacer plate.

New carburetor spacer plate gasket for all 1969 Mercury Cougar or Ford Mustang with S code 390-4V or 390IP original Autolite Carburetors. Additionally it fits all Ford installed Holley carburetors. This is the carburetor spacer to manifold gasket. Upper gasket between spacer and carburetor also available. This carburetor gasket also works well with most aftermarket Holley and Edelbrock carburetors.

New carburetor spacer gasket, goes between the intake manifold and spacer plate. 1969 S code 390-4V or 390IP. Upper gasket, spacer plate to carburetor here.

New carburetor gasket for 67 - 70 Cougar or Mustang with 390 or 428 cobra jet engines and Ford numbered Holley carburetors. One or two needed per installation (with or without spacer plate) sold individually.

New carburetor gasket for all 289-4V, 302-4V, and 351-4V, Mercury and Ford cars from 1964-1970. Same gasket used between intake manifold and spacer, and spacer and carburetor. Sold individually, 2 required for complete installation with Ford 1 inch factory spacer and correct numbered Autolite 4300 carburetors.

Concourse Correct Hollow Left Rear Stud for the Carburetor Vacuum port to the C6 transmission modulator hose Replaces Part # 382768-S8

Since we do not have near enough of these used inner panels to go around, we are offering this cardboard template for purchase for those of you that would like to make your own. With the pictures we provide and the template one should be able to produce a reasonable facsimile. If you are really talented and think you would like to make them in quantity let us know! We would be interested in purchasing them.Click on images to enlarge. The picture above is the support strip that runs through the...

Since we do not have near enough of these used inner panels to go around, we are offering this cardboard template for purchase for those of you that would like to make your own. With the template one should be able to produce a reasonable facsimile. If you are really talented and think you would like to make them in quantity let us know! We would be interested in purchasing them.

Since we do not have near enough of these used inner panels to go around, we are offering this cardboard template for purchase for those of you that would like to make your own. With the template one should be able to produce a reasonable facsimile. If you are really talented and think you would like to make them in quantity let us know! We would be interested in purchasing them.

We have not been able to find an exact match for Aqua, here are the original color swatches from Ford: Here are the closest options we have found: 33-1965 Medium Aqua / Teal (closest, but too light) 25-021 Dark Aqua / Dark Green-Blue (too green) 29-880 Midnight Blue (Almost Black) Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places.*NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your car...

We have not been able to find an exact match for Aqua, here are the original color swatches from Ford: Here are the closest options we have found: 33-1965 Medium Aqua / Teal (closest, but too light) 25-021 Dark Aqua / Dark Green-Blue (too green) 29-880 Midnight Blue (Almost Black) Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

We have not been able to find an exact match for Aqua, here are the original color swatches from Ford: Here are the closest options we have found: 33-1965 Medium Aqua / Teal (closest, but too light) 25-021 Dark Aqua / Dark Green-Blue (too green) 29-880 Midnight Blue (Almost Black) Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the many carpets available out there these are the best....

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places.*NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your car...

Of the many carpets available out there these are the best. They are made with the correct 25 ounce Nylon, molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. For a more plush carpet and added sound deadening, check out our Mass Back carpet kits.

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Dark chocolate brown was used in 68-69 with cars that came with saddle tan or nugget gold seats and interior panels.Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330)...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. Dark chocolate brown was used in 68-69 with cars that came with saddle tan or nugget gold seats and interior panels. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...