Welcome to the NEW WCCC Cougar Parts Catalog (Tell us what you think)
Due to an Ice Storm our office/warehouse are currently without Phone/Internet (Power has been restored).
We will not be able to process/ship orders until our Phone/Internet are restored.
Current ETA for Phone/Internet to be restored are uncertain at this time.
Hours: Monday - Thursday 8am-5pm PST
$5* minimum website order
UK Customers: $250** minimum order (Read More)
loading . . .
Our research efforts incorporate combinations of first hand knowledge, factory assembly manuals, physical examples on the premises and the Mercury Master Parts catalog. The Master Parts Catalog (or MPC) is the 3 foot thick book found at any Mercury dealer back in the day. Many of the parts have superseded numbers or are service replacement parts. Many service replacement parts differ from the OEM factory installed parts. We do our best to know and understand these differences as they come up and point them out. Catalog part numbers and physical part casting numbers also often differ and make part searches difficult. When applicable or when both parts are known to us we will try and list both in the text sections of our parts descriptions. West Coast Classic Cougar recognizes the vast knowledge base of our fellow Cougar owners and enthusiasts. Many of you are original owners or have concours show winning Cougars. If we have made listing errors or made erroneous statements in our descriptions, please do bring it to our attention. Accuracy is our goal throughout our catalog. Please click onto the individual items to obtain price and other details. You can click the image up to three times for a larger view. Need help? Call 503-463-1130

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 630
Price: $11.85

Buy Details

Availability: Normal Stock Item
Item #: 11773 -

Swivel that mounts to the lower clutch rod or clutch adjusting rod. Original Ford part number D0ZZ-7A528-A.

Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 53245 -

Backup light switch retainer for Hurst shifters as installed on 1970-73 Mercury Cougar, Ford Mustang, and most vintage Ford cars with factory installed Hurst shifters.

Price: $2.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41376 -

Floor shifter access plug. 1967-73 Mercury Cougar and Ford Mustang, also fits floor shift 1971+ Mercury Comet and Ford Maverick. Ford Part number C7ZZ-7C147-A. Check out our video on rebuilding your shifter below: ...

Price: $182.85

Buy Details

Availability: Standard Dropship
Item #: 25855 -

Fits perfect! The collar that slips into the opening of the bell housing is very tight for a precise fit that will withstand high horse power motors.

Price: $26.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10490 -

Ford called this part a 'sleeve'. Attaches to the lower shifter arm with a hitch pin. Has nice bushing, with correct nut, washer, and pin. The 1967/68 and 1969/73 versions are identical. The C1AA-7353-C sleeve has fine threads, the C9OZ-7353-A has course threads. Fits all 1967-73 Mercury Cougar and Ford Mustang, and we suspect many other Ford vehicles beginning in 1961. This fine thread version is hard to keep in stock, consider the 1969-73 course thread version as an alternative. Check out...

Price: $29.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10491 -

Ford called this part a 'sleeve'. Attaches to the lower shifter arm with a hitch pin. Has nice bushing, with correct nut, washer, and pin. The 1967/68 and 1969/73 versions are identical. The C1AA-7353-C sleeve has fine threads, the C9OZ-7353-A has course threads. Fits all 1967-73 Mercury Cougar and Ford Mustang, and we suspect many other Ford vehicles beginning in 1961. Check out our video on rebuilding your shifter below: ...

Price: $4.85

Buy Details

Availability: Normal Stock Item
Item #: 13975 -

High quality rubber molded around a flexible steel insert. Insert is cadmium plated to prevent rust. A popular replacement item, as they always wear. While this unit also fits the 1965-68 Mustang, it is only correct for the 1968 Cougar XR7-G. Replaces Ford Part #: C5ZZ-7D351 Check out our video on rebuilding your shifter below: ...

Price: $119.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24818 -

C9ZP-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1969 Mercury Cougar and Ford Mustang with 351 engine and automatic FMX transmission, code X on your door data plate tag.

Price: $119.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25200 -

D0ZP-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1970 - 1971 Mercury Cougar and Ford Mustang with any 351 engine and automatic FMX transmission, code X on your door data plate tag. Ford master part number D0ZZ-7976-A.

Price: $119.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25508 -

D2OZ-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1972 - 1973 Mercury Cougar and Ford Mustang with 351 engine and automatic FMX transmission, code X on your door data plate tag. Ford master part number D2OZ-7976-A.

Price: $215.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0069 -

Correct for 1971, 1972 and 1973 only. 351-2V and 351-4V engines , including Boss 351 for 1971 - 73. Ford part number D1TZ-6392-A and D1TZ-6392-C. Shipped bare, no hardware or clutch fork.

Price: $89.85

Buy Details

Availability: Out of Stock
Item #: 18516 -

Both our A and B quality bezels will need the overlay replaced. Cosmetically this bezel will be as good as our grade "A" units, but when you turn them over you will notice one or two of the feet will be broken off. These missing feet may make it a little more cumbersome to install and if someone walks on your installed console these feet do provide support. Obviously it would be easy to glue on some feet (or spacers) but this item will install just fine without them. Most likely the white will...

Price: $36.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31099 -

Used shifter plate bezel for the Mercury Cougar or Ford Mustang equipped with a 3 or 4 speed manual transmission, but without a center console. This unit is a nice upgrade from the simple plain Mustang boot retainer. This version is the one held down with no screws, the rubber boot holds it in place. Part number C7WB-7262-D is the one being sold.Ford part # three different casting numbers with very slight variations. C7WB-7262-A, C7WB-7262-C, & C7WB-7262-D. Check out our video on...

Price: $18.85

Buy Details

Availability: Normal Stock Item
Item #: 31235 -

Reproduction bolts and washers for the manual transmission bell housing on any 1967-68 Cougar or Mustang equipped with a 289 / 302 engines and either 3 or 4 speed manual stick shift transmissions. Bell housing to engine block bolts. Fits most all other Ford small block V-8's from 1967-68.

Price: $18.85

Buy Details

Availability: Normal Stock Item
Item #: 31233 -

Reproduction bolts and washers for the manual transmission bell housing on any 1969 - 73 Cougar or Mustang equipped with a 302 / 351 engines and either 3 or 4 speed manual stick shift transmissions. Bell housing to engine block bolts. Fits most all other Ford small block V-8's from 1969-73.

Price: $4.85

Buy Details

Availability: Normal Stock Item
Item #: 30549 -

Bolts for securing the inspection cover for small block C-6 automatic transmissions 1971-73 Mercury Cougar or Ford Mustang. Not sure why 3 bolts, but one is different.

Price: $6.85

Buy Details

Availability: Normal Stock Item
Item #: 12356 -

New set of bolts for fastening the transmission inspection cover on all 1967-70 Mercury Cougar, Ford Mustang, and Ford anything with 390, 428CJ, and 352 or any FE style Ford engine. Includes 3 and 4 speed transmissions.

Price: $2.85

Buy Details

Availability: Normal Stock Item
Item #: 30964 -

Set of new bolts for attaching the floor shift bucket to the hump in the floor board, 1/4-20 bolts with washer head and 3/8 inch hex head. Sold as a set of 4 bolts. Fits all 1967 - 1973 Mercury Cougar and Ford Mustangs, and likely all of other floor shift Ford products from this time period. Check out our video on rebuilding your shifter below: ...

Price: $6.85

Buy Details

Availability: Normal Stock Item
Item #: 30193 -

New reproduction insert for the Hurst shifter boots. This is designed to protect the integrity and lengthen the life of the rubber boot used to protect Hurst shifters with rectangular arms. After a while, your boot can become stressed and even begin to tear apart when the arm is shifted contantly. You must remove the shifter handle to install the support. You may need to trim into the reinforced area to get a good fit. Installs from the under side of the boot. Check out our video on rebuilding...

Price: $339.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19093 -

Good used setup as taken from a parts car. Will have good bushings in the hanger and show average wear is all the normal places. We will not send you worn out junk... Click on images to enlarge. ...

Price: $5.85

Buy Details

Availability: Normal Stock Item
Item #: 11295 -

Replacement rubber bushing for repairing any automatic shift arms on any 1967-73 Mercury Cougar or Ford Mustang, and most Fords with automatic floor shift levers. Fits arms with 3/4 inch lower holes for attaching transmission shift rods. Replaces Ford part number C7ZZ-7343 Check out our video on rebuilding your shifter below: ...

Price: $33.85

Buy Details

Availability: Normal Stock Item
Item #: 15253 -

This kit is for the clutch equalizer or clutch Z-bar on 1971-73 Mercury Cougars or Ford Mustangs, all V8 engines. All parts included as shown. *Tip - Add a liberal amount of grease to these parts during installation.

Price: $2.85

Buy Details

Availability: Normal Stock Item
Item #: 42136 -

These reproduction brake and clutch pedal bushings are made from high strength plastic that is wear resistant. Two are required for automatic cars, four for manual transmission cars. Sold as a pair. Replaces Ford part # B7AZ-2471-A.

Price: $159.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0081 -

Bare cast aluminum C4 transmission case from a 1967-68 Mercury Cougar or Ford Mustang. Inspected for damage. Replaces Ford part number C6DP-7006-A.

Price: $22.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0045 -

Used transmission line adapter and check valve for all FMX transmissions. This fitting goes into the rear part of the transmission case and connects the rear most cooling line to the case. Has internal ball check valve to prevent fluid from back flowing. All FMX transmissions 1969-73 Mercury Cougar or Ford Mustang. The male threads going into the transmission case are 1/2-20 pipe threads.Replaces Ford part number C3AZ-7D174-A.

Price: $46.85

Buy Details

Availability: Normal Stock Item
Item #: 41553 -

This bezel was never offered from the factory on a Cougar but is a very attractive part for those with a manual transmission and no console. Works with rubber or leather shift boot, three or four speed manual transmission. Check out our video on rebuilding your shifter below: ...

Price: $19.85

Buy Details

Availability: Normal Stock Item
Item #: 14967 -

(7521) The attaches to the bottom leg of your equalizer bar and the pointed end fits into the recess of your clutch fork. Replaces Ford Part #: C7ZZ-7521-L.

Price: $30.85

Buy Details

Availability: Normal Stock Item
Item #: 31837 -

Economy version of the clutch adjusting rod that fits the 1968, 1969, and 1970 Mercury Cougar with the 390GT, 428CJ or the 428SCJ. Replaces Ford Part #: C8ZZ-7521-BR. Can be used on 1967 3 or 4 speed cars with 390 engine, but must use the 1968 clutch fork, see item 13882.

Price: $52.40

Buy Details

Availability: Normal Stock Item
Item #: 41718 -

Reproduction premium adjusting rod which includes: 2 Lock Nuts 1 Spacer 1 Retaining Clip Fits the 1968, 1969, and 1970 Mercury Cougar with the 390GT, 428CJ or the 428SCJ. Replaces Ford Part #: C8ZZ-7521-BR. Can be used on 1967 3 or 4 speed cars with 390 engine, but must use the 1968 clutch fork, see item 13882.

Price: $17.85

Buy Details

Availability: Normal Stock Item
Item #: 13797 -

Lower clutch rod and adjusting nuts to ensure proper clutch operation. For the Boss 302 and 351. Unless you have your original swivel, also see item 11773. This part goes between the nuts. Replaces Ford Part #: C9OZ-7521-A.

Price: $27.85

Buy Details

Availability: Normal Stock Item
Item #: 13808 -

Adjusting rod - Lower clutch rod that fits between the Z-bar and the clutch fork. Replaces Ford Part # C8AZ-7521-B THIS FITS: 1971 1972 1973 MUSTANG 6 CYLINDER 302 351C BOSS 351 1971 MUSTANG 429CJ 429SCJ 1972 1973 1974TORINO351C 351 CJ 1968 1969 1970 1971GALAXIE 6 CYLINDER 302 351 390 429 1968 1969 1970 1971 MERCURY FULL SIZE351 390 429 1971 COUGAR429CJ 429SCJ 1971 1972 1973COUGAR 351C 351CJ 1972 MONTEGO6 AND 8 CYLINDER

Price: $60.85

Buy Details

Availability: Normal Stock Item
Item #: 14310 -

Equalizer bar or "Z" bar for small block engines with a manual transmission. Both 3 and 4 speed manual transmissions. Replaces Ford part number C7ZZ-7528-G.

Price: $60.85

Buy Details

Availability: Normal Stock Item
Item #: 41576 -

Nice reproduction of the original. Replacement Z-Bar for 1969 and 1970 351W engines with either 3 speed or 4 speed manual transmissions. Replaces Ford # C9ZZ-7528-A.

Price: $68.85

Buy Details

Availability: Normal Stock Item
Item #: 41577 -

Nice reproduction of the original. Street name is Z-Bar. For all 1967 - 1970 FE engines 390 and 428CJ. Replaces Ford part #: C7ZZ-7528-B.

Price: $215.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25466 -

D1ZZ-7528-A Equalizer bar or "Z" bar for 351 and 429CJ engines with a manual transmission. Used up until 4-30-1971. Both 3 and 4 speed manual transmissions. This is a used part and it will most likely show some wear form previous use. *Note - After 4-30-1971 use Ford part D1ZZ-7528-C.

Price: $35.85

Buy Details

Availability: Normal Stock Item
Item #: 30930 -

Clutch equalizer pivot mount, engine side. Fits all 1971 - 1973 Mercury Cougar with 351 Cleveland engine, and 1971 - 1973 Ford Mustangs with 302 or 351 Cleveland engine.  Replaces Ford part #: D1ZZ-7A572-A.

Price: $69.85

Buy Details

Availability: Normal Stock Item
Item #: 41406 -

C5OZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 9-1/4 inches long. Specifically used with a 157 tooth flywheel, as opposed to the 164 tooth fly wheel used after Feb 1968.Replaces ford Part # C5OZ-7515-B.  Cougar before 2-15-1968, 289/302 Engines.  Mustang before 2-15-1968, 289/302 Engines. *Note - This style of clutch fork uses the 'wire' for the holder, not the clip. ...

Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0041 -

C5OZ-7515-B Manual transmission clutch fork for small block V8 engines - 3 and 4 speed, stick shift transmissions. Fork measures 9-1/4 inches long from the divot where the rod rides to the tip of the forked end. Specifically for the C5DA-6394-A bellhousing that used a 157 tooth flywheel. Cougar 1967 through 2-15-1968. XR7, XR7-G. Mustang 1965 through 2-15-1968. 2+2, GT. Fairlane 1965 through 2-15-1968. 500, XL, Custom. Torino / Ranchero 1968 through 2-15-1968. 500, XL Comet 1965 through...

Price: $69.85

Buy Details

Availability: Normal Stock Item
Item #: 41445 -

C8OZ-7515-A Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 10-1/2 inches long. Specifically used with a 164 tooth flywheel, as opposed to the 157 tooth fly wheel used before Feb 1968.Replaces ford Part # C8OZ-7515-A, alternate number C8OA-7541-A.  Cougar after 2-15-1968 - 1969, 289/302 Engines.  Cougar 1969, 351 Engines.  Mustang after 2-15-1968, 289/302 Engines.  Mustang 1969, 250/302/351 Engines.  Fairlane after 2-15-1968,...

Price: $83.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16-0042 -

C8OZ-7515-A Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 10-1/2 inches long from the divot where the rod rides to the tip of the forked end. Specifically used with a 164 tooth flywheel, as opposed to the 157 tooth fly wheel used before Feb 1968.Replaces Ford part number C8OA-7541-A. New reproduction small block fork also available here. Cougar after 2-15-1968 - 1969, 289/302 Engines.  Cougar 1969, 351 Engines. Mustang after 2-15-1968,...

Price: $110.85

Buy Details

Availability: Normal Stock Item
Item #: 14233 -

Replaces Ford part number C8OZ-7515-D. Manual transmission clutch fork - 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-D.

Price: $121.85

Buy Details

Availability: Normal Stock Item
Item #: 13882 -

C8OZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number C8OA-7541-B. Cougar after 2-15-1968 - 1969, 390 Engines. 390IP. Mustang after 2-15-1968 - 1969, 390 Engines. 390IP. Fairlane after 2-15-1968, 390 Engines. Torino / Ranchero after 2-15-1968 - 1969, 390 Engines. Comet after 2-15-1968 - 1969, 390 Engines. Montego after 2-15-1968 - 1969, 390 Engines. ...

For your convinence, you can view this page on our old site by the following link:
View Page On Old Site.