Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Clutch Equalizer Bar - 289 / 302 - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang

Reproduction 289 / 302 Equalizer Bar for the 1967 and 1968 Mercury Cougar or Ford Mustang

1967 Mercury Cougar
1968 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang

1 Review(s) 0

Item #: 14310

Price: $63.65

Cost: 5092

Earns: 255

Bonus: 0

Availability

In-Stock Item - Ships: Next Business Day

Applications

1967 Mercury Cougar
1968 Mercury Cougar
1967 Ford Mustang
1968 Ford Mustang

Description

Equalizer bar or "Z" bar for small block engines with a manual transmission. Both 3 and 4 speed manual transmissions. Replaces Ford part number C7ZZ-7528-G.

Specifications:

Shipping Weight: 6.00 LBS

(weight shown may be the dimensional weight)

1 Reviews (5.00 of 5 Rating)

5.00 out of 5 stars
Based upon 1 Review(s).

5 Stars

100%

4 Stars

3 Stars

2 Stars

1 Stars

Write a review!

Greg

2014

Equalizer bar

3/22/2015

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Fitment
%20

Cons:

Thanks again WCCC, your product was spot on. Everything bolted in perfectly. I'll be back for more parts.

Product Q&A

Number of questions: 1

Please login to ask a question.

Question

Asked:

Will this clutch equalizer bar work with a 67 cougar that is fitted with a 351 windsor/ top loader 4 speed?

December 17, 2024 4:25 PM

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 41532 [More info]
[More info] Clutch Equalizer Pivot - Frame Mount - 289 / 302 - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Mounts on frame for equalizer bar to ride on. Replaces Ford Part #: C5ZZ-7507-A.

Buy

$19.15
Frequently
Purchased With

Item #: 14967 [More info]
[More info] Clutch Adjusting Rod - Lower - 289 / 302 - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
(7521) The attaches to the bottom leg of your equalizer bar and the pointed end fits into the recess of your clutch fork. Replaces Ford Part #: C7ZZ-7521-L.

Buy

$17.35
Frequently
Purchased With

Item #: 26079 [More info]
[More info] Equalizer / Clutch Z Bar Bushing Kit - 289 / 302 / 351 - w/ Stud - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Reproduction Small Block Equalizer Mounting Kit for the 1967 - 1970 Mercury Cougar and Ford Mustang equipped with the 289 / 302 / 351. Includes stud. Also works for BOSS 302...

Buy

$16.36
Frequently
Purchased With

Item #: 11775 [More info]
[More info] Clutch Rod - Upper - 289 / 302 / 390 / 428 - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
(7521) Correct contour insures a good fit, 12 1/2" long. This is for both 3 and 4 speed cars. Check out the comparison picture with the off-shore crapola rod sold by most vendors. The only reason you replace this...

Buy

$16.45
Frequently
Purchased With

Item #: 14249 [More info]
[More info] Bushings - Clutch Rod - EACH - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
(7526) Nylon plastic injected. Correct original design. Protects clutch equalizer and rod, and removes excess play. These are to put on either end of your clutch pedal rod. Sold individually. If your going to do...

Buy

$1.15
Frequently
Purchased With

Item #: 26572 [More info]
[More info] Seal - Clutch Pedal Rod to Firewall - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Reproduction Clutch Pedal Rod To Firewall Seal. Replaces Ford Part #: C6OZ-7533.*NOTE* From personal experience we have found these do not stay attached to the firewall as well as the originals. An adhesive will...

Buy

$4.55
Frequently
Purchased With

Item #: 41540 [More info]
[More info] Spring - Clutch Pedal Return - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
This attaches to the bracket mounted on the top side of your pedal hanger over to the clutch pedal itself. Replaces Ford Part #: C2AZ-7534-A.

Buy

$20.05
Frequently
Purchased With

Item #: 41549 [More info]
[More info] Spring - Upper Clutch Equalizer to Firewall - 289 / 302 - Repro ~ 1967 - 1968 Mercury Cougar / 1966 - 1968 Ford Mustang
Exact reproduction of the 1967-68 Mercury Cougar and 1966-68 Ford Mustang clutch release fork to equalizer spring. Upper clutch equalizer to firewall, 289 and 302 engines. This unit will also work for 1969-70...

Buy

$5.91
Frequently
Purchased With

Item #: 11798 [More info]
[More info] Clutch Pedal Bumper - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Bumper that helps stop the 'clunk' noise when you take your foot off of the clutch pedal on manual transmission 67 - 68 Cougars and Mustangs.Replaces Ford Part Number: C7ZZ-7583

Buy

$1.85
Frequently
Purchased With

Item #: 14100 [More info]
[More info] Spring Insulator - Clutch Pedal - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Injection molded plastic stops underdash squeaking from clutch pedal return spring. 2 required per car. Replaces Ford Part #: C1DZ-7A630-A

Buy

$4.55
Frequently
Purchased With

Item #: 10616 [More info]
[More info] Spring Bracket - Equalizer Bar Assist - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Description: The Ford Master Parts Catalog calls this "Bracket - Clutch Release Lever Retracting Spring". This little "L" shaped bracket is found only on 1967 - 1968 Mercury Cougars and Ford Mustangs with a 3 or 4...

Buy

$30.95
Frequently
Purchased With

Item #: 42136 [More info]
[More info] Bushings - Brake & Clutch Pedal - PAIR - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
These reproduction brake and clutch pedal bushings are made from high strength plastic that is wear resistant. Two are required for automatic cars, four for manual transmission cars. Sold as a pair. Replaces Ford...

Buy

$2.88

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

E4F14