Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 8785-8832 of 13234
$0 Price: $1,074.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20015 -

Good used external XR7-G driver side (left hand) rear view mirror with its adapter base, lens, and cables all in good used condition.  Do you have riv-nut questions? Here are riv-nut answers!

$0 Price: $3.87

Buy Details

Availability: In-Stock Item
Item #: 26213 -

This kit is similar to the original type mounted in every drivers side door. These OEM style Riv-Nuts will be a challenge to install unless you have the special tool. Almost every body shop will have this rivet gun type of tool but here are a couple of ways to tackle the installation without the correct tool. Hole size is 1/4". Replaces Ford Part #: C7AZ-17696. Check out this video Still have riv-nut questions? Here are riv-nut answers! ...

$0 Price: $1.92

Buy Details

Availability: In-Stock Item
Item #: 42027 -

If your are missing your factory Riv-Nuts, or you are installing a passenger side mirror, these are a very easy to use alternative to the metal riv-nuts we offer. Another good application for these is when your existing mirror mounting holes are "hogged out" these slightly over sized inserts are just the ticket. Keep in mind our kit is not only less money than others you may find but the screws are stainless steel. Hole size for these rubber inserts is 3/8". Keep in mind the upper lip stands a...

$37.00 Price: $81.55

Buy Details

Availability: In-Stock Item
Item #: 14328 -

Quick disconnect that installs between the sight glass hose and the sight glass to A/C dryer hose. This unit also includes 2 O-rings (Part # L33,D2AZ-19D695-R or YF-368 and Part # H33, D2AZ-19D695-AE or YF-316)Quick Connect (Part # QF3,C1SZ-19B696-A or YF-241 and Part # QM6, C1SZ-19B695-A or YF-252).

$0 Price: $7.45

Buy Details

Availability: In-Stock Item
Item #: 14-0019 -

New spray silicone lubricant for the squeaky Mercury or Ford. This spray lubricant is great for door hinges, trunk hinges, hood hinges and basically anything else that needs to be lubricated. Easy to use and will definitely de-squeak your vehicle.

$0 Price: $22.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31494 -

Slat or pivot bracket for attaching the #4 rear most bow on a 1969-70 convertible top. Sold individually, one for each side needed for installation. Bushing is normally broken or missing, plan on sourcing or making a replacement bushing for the pivot. Ford part number C9ZZ-7650340-A.

$0 Price: $6.15

Buy Details

Availability: In-Stock Item
Item #: 41017 -

Reproduction Small Block Intake Manifold Bolt for the 1968 -1969 Mercury Cougar - 1968 -1969 Ford MustangSold individually 

$0 Price: $65.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33150 -

Used driver side smog hose. Connects the cylinder head smog tube check valve to the distribution "T" connector. 1967 Mercury Cougar and 1967 Ford Mustang with C and A code 289 engines, and typical California Thermactor smog system. Hose only, no clamps included. Ford part number C7OE-9C433-A.

$0 Price: $35.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33151 -

Used passenger side smog hose. Connects the cylinder head smog tube check valve to the distribution "T" connector. 1967 Mercury Cougar and 1967 Ford Mustang with C and A code 289 engines, and typical California Thermactor smog system.  Ford part number C6AE-9B459-A.

$0 Price: $241.67

Buy Details

Availability: Out of Stock
Item #: 30896 -

Thermactor smog hose installation clamps. Fits all Ford and Mercury 1968 S code 390-4V or W code 427-4V engines sold in the US. Additionally fits 1968-70 428 Cobra Jet and Super Cobra Jet engines. Set of clamps, several bolts and spacer as shown. Include bolts for pump pulley, top bolt on pump for adjusting bracket, and pivot bolt and spacer for pump.

$0 Price: $2.05

Buy Details

Availability: In-Stock Item
Item #: 41016 -

Reproduction Smog Pump Pully Bolt for the 1967 - 1968 Mercury Cougar or Ford MustangSold individually 

$0 Price: $22.91

Buy Details

Availability: In-Stock Item
Item #: 27410 -

Reproduction hardware kit for installing the smog pump on cars with 390 / 427 / 428CJ engines from 1968-70. Including Cougar, Mustang, Torino, Ranchero, Cyclone, etc. Includes spacer, pivot bolt and washer, adjusting bracket bolts.

$0 Price: $495.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12166 -

Complete original system as taken from a small block 289 from California. Comes with all items shown and you can choose from the large pulley as found on AC cars or the smaller pulley found on non AC cars. These systems are getting rather elusive to find with pliable hoses, correct Wittek clamps and correct fasteners. For years only those with big block cars cared to obtain original smog systems. That has changed... Even if you do not install it, if your car originally had it it will...

$0 Price: $358.33

Buy Details

Availability: In-Stock Item
Item #: 30670 -

Set of thermactor smog tubes on any 1968 390GT, 1968 GT-E 427-4V, or 1968-70 428 Cobra Jet engines. Mercury Cougar and Ford Mustang, Torino, Cyclone, Ranchero, etc. These will work with original 390 or 428CJ cylinder heads drilled for air injection smog system from factory. Fits most FE engine applications that used the air pump smog system in 1968 with manual transmission. We also have the ferrules / nuts and other hardware.

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30173 -

Used snap in socket / pigtail for the clock light on your 67 - 68 Cougar. Also fits many other applications.

$0 Price: $2.88

Buy Details

Availability: In-Stock Item
Item #: 15-0178 -

Used snap ring that is used to hold the bearing on you the steering shaft. This ring was used on 67 - 78 fixed columns and 70 - 78 tilt columns. Not for use on 67 - 69 tilt columns.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

$0 Price: $1,213.94

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33730 -

This is the base model Sniper II kit, does not include Power Distribution module or any other options.  The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is...

$0 Price: $1,569.95

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33548 -

The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple...

$0 Price: $80.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20251 -

Nice original snorkel that is correct for 2V and 4V 289 motors both 49 state and California Cougars. Due to the age of these parts, the internal thermal mechanism can be presumed to not work. Ford part number C7ZF-9A626-A.

$0 Price: $165.85

Buy Details

Availability: Rare / NOS Part
Item #: 33113 -

This air cleaner is the late style without the vacuum actuated valve. Mid year it was changed to a thermal activated valve. After 4/2/1968. 289-2V , 302-2V, and 302-4V engines after 4/2/1968. Ford part number C8AZ-9A626-D. NOS new old stock. ...

$0 Price: $85.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24378 -

This air cleaner is the late style without the vacuum actuated valve. Mid year it was changed to a thermal activated valve. After 4/2/1968. 289-2V , 302-2V, and 302-4V engines after 4/2/1968. Ford part number C8AZ-9A626-D. Click on images to enlarge. ...

$0 Price: $80.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15159 -

This air cleaner is the early style with a vacuum actuated valve. 289-2V , 302-2V, and 302-4V engines prior to 4/2/1968. Ford part number C8AZ-9A626-A.

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25486 -

IMCO emissions air cleaner snorkel for a 1972 Cougar with 351-2V engines only. Non-California, 49 states only. (California required IMCO with NOx, see D2ZZ-9A626-B). Ford part number D20Z-9A626-C.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25252 -

Application is for all 1971 Cougars with 351 engines, both 2V and 4V engines. Additionally it includes 1972 351-4V without NOx. Our research shows that NOx was a California emissions requirement. Ford part number D10Z-9A626-B. *Note - 1972 49 state 351-4V air cleaner snorkel.

$0 Price: $138.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25547 -

California emissions 351-4V air cleaner snorkel. DSO 52 and DSO 53 Cougars with Q-code 351-4V engines.

$0 Price: $169.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15125 -

Application is for all 1970 351 Cleveland engines, both 2 barrel and 4 barrel. This air cleaner snorkel is different from past years in that the opening is necked down and has a flared flange. It also has a small opening on the bottom for a metal "S" tube. Actuator has not been tested and may or may not be in working condition. Ford part number D0OZ-9A626-D. Click on images to enlarge. ...

$0 Price: $97.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24647 -

Applications all 1969 351 engines, both 351-2V and 351-4V, and 1970 351W-2V engines after 2/2/1970. That is correct, after Feb 1970 the H-code Windsor engined 351's used a 1969 style air cleaner snorkel.The C9OZ-9A626-B snorkel looks the same, but is a bit longer than the 1968 C8AZ-D snorkel. Probably due to the taller deck height of the 351 over the 302 engine, and or the heat shield design. Please note: Wax stat is not tested, nor can we test them, sold as- is. Click on images to enlarge. ...

$0 Price: $127.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25100 -

Application is for the beginning of the 1970 model year and only for H-code 351W-2V. Windsor engines only, from inception until 2/2/1970. Ford part number D0OZ-9A626-B.

$0 Price: $539.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32713 -

This snorkel was found on the 1968 Mercury Cougar and XR7-G models with the 390 or 428 engine and the tall pent roof finned aluminum valve covers. The HERTZ model with the 390 engine used a chrome "Powered By Ford" chrome valve cover and did not need the extra length in the extension. NOS XR7-G Air Cleaner Snorkel for the 1968 Mercury Cougar Equipped with the 390 or 428 Engine and cast aluminum running cat valve covers. Ford part # C8WY-9A626-B. ...

$0 Price: $346.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11882 -

Quality recreation made from original parts. Decent reproduction, slightly different than the original Ford version. The noticeable difference is the lack of square notch in the slop joint. Ford part of C8OZ-9A626-C. This snorkel comes to you in primer.

$0 Price: $104.85

Buy Details

Availability: Out of Stock
Item #: 18697 -

Application would be for only 1971 Cougars with the 429CJ option, either ram air or non-ram air. Original Ford part number was D0GY-9A626-A, this unit is from a Ford Truck, part #is from a D3TZ-9A626-G. This is a low cost alternative to a very rare part. Click on images to enlarge. ...

$0 Price: $500.00

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30848 -

Application would only be for 1969 Boss 302 Eliminators and Boss2 Mustangs.Ford part number C9ZZ-9A626-C.

$0 Price: $500.00

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 25247 -

Although these are considered reproductions, they are actually put together from multiple parts of original excellent condition used snorkels. And, since there are multiple colors of Ford Blue, the supplier is leaving them as unpainted.Application would only be for 1970 Boss 302 Eliminators and Boss2 Mustangs. Ford part number D0ZZ-9A626-B.

$0 Price: $19.98

Buy Details

Availability: In-Stock Item
Item #: 10714 -

Air cleaner pre-heater paper hose. Should fit most applications from 1970-73 Mercury Cougar and Ford Mustang with V8 engines. 2 inch inside diameter, we cut these to about 9 inches long. Correct black paper outside, flexible paper tube, kind of like a Slinky. Please verify your needed length, we leave them a bit longer than needed so that they fit more than one application.

$0 Price: $66.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15134 -

Air cleaner intake assembly or snorkel specific to the one year only 390-2V premium fuel engine, (X code engine). This version has the thermally operated trap door. There was an early version that used vacuum to open the trap door to the heat stove. Ford part number C8WY-9A626-A. *Note - This snorkel has a different spacing on the mounting ears, it will not mount to a 390GT air cleaner base.

$0 Price: $75.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32840 -

Air cleaner intake assembly or snorkel specific to the one year only 390-2V premium fuel engine, (X code engine). This version has the vacuum operated trap door. There was an more common thermal version that used temperature to open the trap door to the heat stove. In most cases the vacuum valve will not be working. Most people are probably better off with the thermal version. We do not know the change over date. Ford part number C8WY-9A626-A. *Note - This snorkel has a different spacing...

$0 Price: $8.00

Buy Details

Availability: In-Stock Item
Item #: 33617 -

Reproduction cigar or cigarette lighter socket and retainer assembly for 1971-73 Mercury Cougar and Ford Mustang. Also available with lighter, see related items.Ford part # D1ZZ-15052-A.

Socket - Clutch Equalizer - PAIR - Repro ~ 1971 - 1973 Mercury Cougar / 1971 - 1973 Ford Mustang
1965 - 1971 Ford Galaxie and Full Size (Galaxie, XL, LTD, Custom 500 etc..)| 1970 Torino 429|1972 - 1976 Ford Torino, Gran Torino and Ranchero |1973 - 1976 Ford Maverick
0
$0 Price: $22.75

Buy Details

Availability: In-Stock Item
Item #: 14065 -

Replacement pair of Clutch Equalizer Bar ( Z-Bar) Bushings. These are for manual transmission equipped models and are a bushing that is no longer available from Ford. These are the split bushing style that replace Ford part number C5AZ-7543-C. These fit 1965 1966 1967 1968 1969 1970 1971 Ford Galaxie and Full Size Models (Galaxie, XL, LTD, Custom 500 etc..), 1970 Torino 429 Models, 1971 1972 1973 Mustang, 1972 1973 1974 1975 1976 Ford Torino, Gran Torino and Ranchero models and 1973...

$0 Price: $16.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15750 -

Used under dash wiring harness repair plug and pigtail to the ignition switch light socket for the Mercury Cougar. This is part of the 14401 main under dash wiring harness.

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22237 -

Light socket harness for the headlight reminder option. Works in conjunction with dash light and buzzer. 1970 XR7 and Eliminator option, not for standard, non- Eliminator models. Ford part numbers D0WY-13B155-A and wire cast number D0WB-13B155-A.

$0 Price: $57.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19259 -

Good used light used only on the 1967 automatic consoles. The only difference between this shift indicator light without console and with console is the diffuser. The diffusers pull off and interchange. This light harness is also known as the PRNDL light harness (park, reverse, neutral, ...). If you choose to run the light without the diffuser it will shine bright as opposed to a warm glow.  Ford Part Number: C7ZZ-15A808B Fits 67 CougarFits 67 Mustang Check out our video on rebuilding...

$0 Price: $47.35

Buy Details

Availability: In-Stock Item
Item #: 18741 -

Reproduction light used only on the 1967 automatic consoles. The only difference between this shift indicator light without console and with console is the diffuser. The diffusers pull off and interchange. This light harness is also known as the PRNDL light harness (park, reverse, neutral, ...). The 1967 light had a male / female black combination plug. If you choose to run the light without the diffuser it will shine bright as opposed to a warm glow. Ford Part Number: C7ZZ-15A808B Check out...

$0 Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 14078 -

For use with factory and reproduction console parts on a 1968 Mercury Cougar or Ford Mustang. Plugs into your existing console wiring harness. Double male plug is 1968 only. Sold without light bulb. The supplier says this replaces Ford part number C7ZZ-15A808-B but that is incorrect as the Ford part number for 68 is C8ZZ-15A808-B. To use this on a 67 the plug would have to be changed to a male / female combo plug.

$0 Price: $40.95

Buy Details

Availability: In-Stock Item
Item #: 32108 -

Reproduction shift indicator light for use on the 68 Cougar and Mustang without a center console. Plugs into your existing console wiring harness. Double male plug is 1968 only. 

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27281 -

Bulb and socket assembly that attaches to the back side of your instrument cluster housing on all 1968 Standard model Cougars. All electrical harnesses are inspected, professionally repaired (when needed), tested, and ready to install. Harness marked C8WB-10B942-E.Check out the video below on our new gauge tester: ...