Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 10657-10704 of 13244
Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 25176 -

Used under dash ashtray assembly for non-console 1970 Mercury Cougar and Ford Mustang. Pebble grain finish that you paint to match your interior color. Comes as shown with light.

Price: $36.77

Buy Details

Availability: Out of Stock
Item #: 24675 -

Used under dash ashtray assembly for 1969 Mercury Cougar XR7 models. Same as the standard model ashtray, but has burl wood and chrome. Does not come with cigar lighter or knob. Light and wiring harness NOT included.Here’s a little inspiration for you to get our vinyl overlay kit and wrap your own parts! ...

Price: $34.88

Buy Details

Availability: Out of Stock
Item #: 10492 -

Knob for the under dash ashtray on 1969 Mercury Cougar and Ford Mustang without consoles. Used in conjunction with a chromed bezel. Ford part # C9ZZ-65048B38-A.

Price: $495.86

Buy Details

Availability: Out of Stock
Item #: 30160 -

The automatic seat back release option was added in early 1970 for Cougar and Mustang. The automatic seat back release would pull the release lever on both of the bucket seats. This only happens when the either the driver or passenger side door is opened. Kit comes with the 1970 specific wiring harnesses from the solenoid, includes 3 pin switch for the passenger pillar post, relay, solenoids, and cross over wiring. This option is best added to seats prior to upholstery. We are not sure...

Price: $181.85

Buy Details

Availability: Out of Stock
Item #: 13839 -

This is for your automatic transmission 1970 Cougar. The 70 is unique over the 69 in that it does not have a provision for your seat belt buckles. This part requires an additional woodgrain bezel that affixes to the top, we also have one listed that does not require the additional bezel. Absolute perfection in every detail, if all reproductions were this nice there would be no market for used parts. *Note - This console part does have pre-drilled holes for installing the woodgrain top pieces. ...

Price: $42.17

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10937 -

Transforms your interior into a concert hall with superior musical sound quality. Eliminates the need to crank up the volume on your sound system, and by reducing vibration, it minimizes distortion. Plus the reduced noise level makes for a more pleasant ride when the stereo is off. Flexible material won't crack or peel. Adhesive backing allows easy, permanent installation behind speakers in doors or back seat panels, under speakers in trunk...anywhere. The 36" x 60" material can be easily...

Price: $929.88

Buy Details

Availability: Out of Stock
Item #: 24539 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1968 big block Cougars. Over-sized shipping length. Ford part # C8ZZ-4010-C. Axles needed: Passenger side - 31-1/8 inches long, Driver side 27 inches long. *Tip* If you are looking to strengthen your 1967-68 Cougar or Mustang with a 9 inch rear end, consider buying our used assembly from a 1969 or 1970....

Price: $1,000.04

Buy Details

Availability: Out of Stock
Item #: 31371 -

Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1968 big block Cougars. Over-sized shipping length. Also has little differences in the housing early to late. Feb 1968, the brake hose mounting hole moved for staggered shocks, for use with 4 speed 428CJ's. Ford part # C8ZZ-4010-C. Axles needed: Passenger side - 31-1/8 inches long, Driver side 27...

Price: $1,199.88

Buy Details

Availability: Out of Stock
Item #: 24268 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Rear axle assembly - Housing, Axles, brake backing plates, and third member. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. 1967 early 9 inch rear end housings had the carry over fill plug in the steel housing as seen from the back of the car. As removed from West Coast Cougar organ donor car. We recommend a bearing...

Price: $1,129.86

Buy Details

Availability: Out of Stock
Item #: 24538 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Rear axle assembly - Housing, Axles, brake backing plates, and third member. First year for the oil fill plug in the cast third member. Also has little...

Price: $1,200.02

Buy Details

Availability: Out of Stock
Item #: 27513 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Rear axle assembly - Housing, Axles, brake backing plates, and third member. 1967 late 9 inch rear end housings without fill plug in the steel...

Price: $890.01

Buy Details

Availability: Out of Stock
Item #: 31372 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Rear axle assembly - Housing, Axles, brake backing plates, and third member. First year for the oil fill plug in the cast third member. Also has little...

Price: $849.87

Buy Details

Availability: Out of Stock
Item #: 24842 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Housing overall width - 54-1/4 inches flange to flange. Spring perches are 43 inches apart on center. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. Rear axle assembly - Housing, Axles, brake backing plates, and third member. As removed from a 1969 West Coast Cougar organ donor car. We recommend a...

Price: $864.86

Buy Details

Availability: Out of Stock
Item #: 25796 -

Nos pair includes NOS lenses. No blems, no excuses! C9WY-15500-B Click on images to enlarge. ...

Price: $0.85

Buy Details

Availability: Out of Stock, On Order
Item #: 14048 -

These barrel nuts or clips are exactly like the original ones inserted into the trunk for attaching 1967-68 "Mercury" script, and 1971-72 Mercury Cougar "Mercury" Hood scripts. The manufacturer indicates that these tubular nuts fit 1/8" holes. Pin size on those emblems are 3/32". These clips are also used to attach the 1967 quarter panel emblems. The install is basically the same as shown here: https://youtu.be/mcd788WUNns ...

Price: $132.89

Buy Details

Availability: Out of Stock
Item #: 20256 -

Correct for closed emission system Cougars sold only in California. Air cleaner base for both the 289-2V and 289-4V engines. About 17.25" inches in diameter. California emissions with the metal elbow for hose connection to the oil filler cap.

Price: $248.85

Buy Details

Availability: Out of Stock
Item #: 25403 -

D1ZF-9600-DA Air cleaner base for all 1971 Cougars with the M code 351-4V engine. About 17.76" inches in diameter. Could also be found with casting number D1ZF-9600-DB or D1ZF-9600-DC. Ford part number D1ZZ-9600-D.

Price: $248.85

Buy Details

Availability: Out of Stock
Item #: 25601 -

D3ZF-9600-BA Air cleaner base for all 1973 Q code 351CJ engines. About 16.75" inches in diameter. Ford part number D3ZZ-9600-B.

Price: $402.89

Buy Details

Availability: Out of Stock
Item #: 18954 -

This is the correct base for a 1972 Mercury Cougar with a Q code 351-4V Cleveland engine. It came with a painted lid unless your car happened to have been ordered with the "Sporty Exhaust" package and then a chrome lid was included. One year only air cleaner for the Cougar. Ford casting number D2ZF-9600-EA or D2ZF-9600-KA.

Price: $468.86

Buy Details

Availability: Out of Stock
Item #: 24445 -

C8OF-9600-B For all 1968 S code 390-4V engines, regardless of GT or 6.5 badges. About 17.00" inches in diameter. Unique feature on this base is the addition of a round vacuum operated valve on the drivers side. Ford part number C8OZ-9600-B *NOTE* Please keep in mind that our hard to find parts like this are not always competitively priced with what you will find on the open market at swap meets and private party sales. Our primary intent in listing these is for our customers to use this...

Price: $401.27

Buy Details

Availability: Out of Stock
Item #: 24419 -

C8OF-9600-B For all 1968 S code 390-4V engines, regardless of GT or 6.5 badges. About 17.00" inches in diameter. Unique feature on this base is the addition of a round vacuum operated valve on the drivers side. Ford part number C8OZ-9600-B. Our grade B base may have extra holes drilled, possibly dents or rust. Call for details on exact blemishes. Current base is missing the round vacuum valve completely.

Price: $1,210.86

Buy Details

Availability: Out of Stock
Item #: 25197 -

D0ZF-9600-C Air cleaner base for the 1970 G code Boss 302 Eliminator engines. Could also be found under casting number D0ZF-9600-R. About 16.79" inches in diameter. Ford part number D0ZZ-9600-C.

Price: $1,019.88

Buy Details

Availability: Out of Stock
Item #: 24446 -

This air cleaner base (Ford part number C8OZ-9600-C) was used on all 1969 BOSS 302, 1969 S code 390 IP (Improved Performance) Cougars and 1969 Cougars equipped with a Q code 428 CJ. The air cleaner shown here was taken from a 1969 390 S code with a 21C date (March 21st). The Cobra Jet Cougars saw a minor change in these air cleaners on February 17th (or close) 1969. The change included the addition of a small metal strap that was spot welded to the lower portion of the passenger side of the...

Price: $1,183.86

Buy Details

Availability: Out of Stock
Item #: 25198 -

D0ZF-9600-E Air cleaner base for 1970 Q code 428 Cobra Jet engines without the ram-air option. Identified with the rectangular vacuum operated valve on the driver side. Additionally the 1970 air cleaner has a star marked plug next to the snorkel on the passenger side. Starting in 1970 this base also received a plastic elbow for mounting the breather hose to the oil fill cap. About 16-3/8" inches in diameter. Could also be found under casting number D0ZF-9600-K. Ford part number D0ZZ-9600-E. ...

Price: $1,129.86

Buy Details

Availability: Out of Stock
Item #: 24611 -

C9OF-9600-H Late production 1969 Q code 428 Cobra Jet non-ram air engine air cleaner base. For those cars built after 2/17/1969. Identified with the addition of a small vent fitting and strap for vent hose on bottom. Unique 1969 air cleaner base with a rectangular vacuum actuated valve on the drivers side. About 16-3/8" inches in diameter. Ford part number C9OZ-9600-H.

Price: $1,238.85

Buy Details

Availability: Out of Stock
Item #: 24420 -

C8OF-9600-C Unique 1969 air cleaner base with a rectangular vacuum actuated valve on the drivers side. Applications include 1969 Q code 428CJ (non ram-air), 1969 S code 390-4V, and 1969 Boss 302 Eliminator. About 16-3/8" inches in diameter. Early 1969 production through 2/17/1969, after that date there was a vent added for automatic choke issues. Ford part number C8OZ-9600-C.

Price: $853.88

Buy Details

Availability: Out of Stock
Item #: 25263 -

D1AF-9600-HA Air cleaner base for all 1971 C code 429 Cobra Jet non-ram air engines. About 17.76" inches in diameter. Could also be found with casting number D1AF-9600-HB. Ford part number D1AZ-9600-H.

Price: $1,094.85

Buy Details

Availability: Out of Stock
Item #: 24817 -

C9ZF-9600-F Late production 1969 428 Cobra Jet ram air engine air cleaner base. For those cars built after 2/17/1969. Identified with the addition of a small vent fitting and strap for vent hose on bottom. About 16-3/8" inches in diameter. Ford part number C9ZZ-9600-F. Click on images to enlarge. ...

Price: $1,194.89

Buy Details

Availability: Out of Stock
Item #: 24802 -

C9ZE-9600-E Air cleaner base for the 1968 and early 1969 R code 428 Cobra Jet engine option. Additionally one way to identify this air cleaner is the dimple that clears the rear float screw found on the factory Holley carburetor. Early 1969 production is through 2/17/1969, after that date there was a vent added for automatic choke issues. About 16-3/8" inches in diameter. Ford part number C9ZZ-9600-E or C8ZZ-9600-A. Click on images to enlarge. ...

Price: $1,238.85

Buy Details

Availability: Out of Stock
Item #: 25130 -

D0WF-9600-A Air cleaner base for 1970 Q code 428 Cobra Jet engines with the ram-air option. *Trivia - all 1970 Cougars with 428CJ were identified by a Q in the 5th digit of the VIN. Only those Cougars specifically with the ram-air option used this air cleaner base. Note - it is not the same as the 1970 ram-air Mustang base. Additionally the 1970 air cleaner has a star marked plug next to the snorkel on the passenger side. Starting in 1970 this base also received a plastic elbow for mounting...

Price: $1,062.86

Buy Details

Availability: Out of Stock
Item #: 25329 -

D1WF-9600-AA Air cleaner base for all 1971 J code 429 Cobra Jet ram air engines. *Note - Not the same as the J code Mustang Ram Air - air cleaner base. Could also be found with casting number D1WF-9600-BA or D1WF-9600-BB.

Price: $292.86

Buy Details

Availability: Out of Stock
Item #: 19590 -

Mint condition part that is almost always missing on cars equipped with group 27 battery. Great addition to your 1970 BOSS 302 Eliminator. Also correct for Mustang and Torino. Ford part # D0OZ-10A682-A, casting number as seen on part is D0OB-10A682-A. There is currently no correct reproduction of this part. Click here for more information on this rare part.

Price: $74.88

Buy Details

Availability: Out of Stock
Item #: 16002 -

Good used tray that is not currently reproduced. Most people prefer the group 24 battery but for those that want to keep it very original, this is getting to be a hard to find part with no rot (will show pitting). Many that are not rotted have been cut to accept a group 24.

Price: $174.87

Buy Details

Availability: Out of Stock
Item #: 30632 -

Good used group 24 tray for 1967 Mercury Cougar or Ford Mustang. Assembly line installed group 24 battery tray with holes for tilt vacuum canister. For those that want to keep it very original, this version is not reproduced. This is getting to be a hard to find part with no rot (will show pitting).

Price: $195.00

Buy Details

Availability: In-Stock Item
Item #: 31764 -

Good used group 27 tray for 1969-70 Mercury Cougar or Ford Mustang. Assembly line installed group 27 battery tray. For those that want to keep it very original.Current tray has some erosion on the battery surface from use as shown. One little rust hole in the corner.

Price: $65.88

Buy Details

Availability: Out of Stock
Item #: 31917 -

Used battery tray, may not be exactly like the assembly line tray. Group 27 battery tray is typical for cars with air conditioning and higher amp alternators. Fits 1971-73 Mercury Cougar and Ford Mustang. Also 1970-71 Ford Torino and Mercury Cyclone and variants of the B or C midsize Ford and Mercury bodied cars. Used condition, minor pitting as shown. Replaces Ford Part #: D0OZ-10732-B.

Price: $14.75

Buy Details

Availability: Out of Stock, On Order
Item #: 12337 -

New front inner wheel bearing for original drum and disc brakes for all 1967-69 Mercury Cougar and 1967-69 Ford Mustang with V-8 engines. These are tapered bearings with cone or race. Inner diameter is 1.25 inches. These are dry bearings, meaning they will need to be packed with chassis bearing grease, prior to installation. A smaller outer bearing and this inner bearing are required for each side. Two of each needed for the front wheels. *Note - This bearing only fits the 1967-69 spindles,...

Price: $13.85

Buy Details

Availability: Out of Stock, On Order
Item #: 13691 -

New front outer wheel bearing for original drum and disc brakes for all 1967-69 Mercury Cougar and 1967-69 Ford Mustang with V-8 engines. These are tapered bearings with cone or race. Inner diameter is 0.75 inches. These are dry bearings, meaning they will need to be packed with chassis bearing grease, prior to installation. A large inner bearing and this outer bearing are required for each side. Two of each needed for the front wheels. *Note - This bearing only fits the 1967-69 spindles,...

Price: $25.88

Buy Details

Availability: Out of Stock
Item #: 15-0057 -

Used upper steering column bearing for your 67 - 73 Cougar or Mustang. One required per car. Fixed Columns only use the upper bearing, while the tilt columns used an upper and lower. The used lower bearing can be found here. Outside diameter: 1 3/16 " * - may not fit some 67 Mustang applications with a fixed column as these used Ford part # C4OZ-3517-A, which is the same part used in the Fairlanes/Comets with a fixed column. To our knowledge this bearing is not currently reproduced. *NOTE* For...

Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 31478 -

Used Bell Crank from the Servo Assembly on any 1967-68 Mercury Cougar or Ford Mustang with speed control. Attaches to the Connector, via a Shaft, and Trunnion is attached. Ford part number C7ZZ-9B713-A.

Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 31485 -

Used Bell Crank from the Servo Assembly on any 1969 Mercury Cougar or Ford Mustang with speed control. Attaches to the Servo Bracket and Rod from Servo. The likely Ford part number C9ZZ-9B713-A.Ford part number 9B713.

Price: $224.87

Buy Details

Availability: Out of Stock
Item #: 16-0080 -

C5OP-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1967 - 1968 Mercury Cougar with any 289 or 302 engine and automatic C4 transmission, code W on your door tag. 1967 - 1972 Ford Mustang with 250, 289, or 302 engine and automatic C4 transmission, code W on your door data plate.  Fits the 157 tooth flex plates. There was a 164 tooth flex plate that came later. Ford master part number C5OZ-7976-A. . ...

Price: $80.87

Buy Details

Availability: Out of Stock
Item #: 31333 -

C5OP-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1967 - 1968 Mercury Cougar with any 289 or 302 engine and automatic C4 transmission, code W on your door tag. 1967 - 1972 Ford Mustang with 250, 289, or 302 engine and automatic C4 transmission, code W on your door data plate. Fits the 157 tooth flex plates. There was a 164 tooth flex plate that came later. NOTE * Grade B bell housing will have a chip or heavy scarring on the bottom, see photo...

Price: $194.85

Buy Details

Availability: Out of Stock
Item #: 25200 -

D0ZP-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1970 - 1971 Mercury Cougar and Ford Mustang with any 351 engine and automatic FMX transmission, code X on your door data plate tag. Ford master part number D0ZZ-7976-A.

Price: $225.86

Buy Details

Availability: Out of Stock
Item #: 23857 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

Price: $235.89

Buy Details

Availability: Out of Stock
Item #: 24510 -

Manual transmissions, include both 3 and 4 speed Top Loader transmissions. Ford part number C5DZ-6392-B. For use on 289 engines after 2-15-68. This bellhousing is only for use with the 157 tooth flywheel. This bell-housing also requires the use of clutch fork C8OA-7515-A. Shipped bare, no hardware or clutch fork. Replaces Ford part number C8ZA-6394-A.

Price: $435.87

Buy Details

Availability: Out of Stock
Item #: 16-0068 -

Manual transmissions, include both 3 and 4 speed Top Loader transmissions. Ford part number C6OZ-6392-B. The latest research shows that the casting number C60A-6394-B bellhousing may have been for 1966-68 Cougar, Mustang, Fairlanes and Comets with an 11 inch clutch disc.  Shipped bare, no hardware or clutch fork.