Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 577-624 of 13243
Price: $32.75

Buy Details

Availability: In-Stock Item
Item #: 15819 -

This is the 4 hole version of the ball joint for the 1967 - 1969 Cougar and Mustang. Right is same as left. Two required per car. Hardware included.

Price: $5.75

Buy Details

Availability: In-Stock Item
Item #: 41047 -

Reproduction disc brake hose bolt for any 1968-73 Mercury Cougar and generally all other Ford cars with factory disc brakes. Special hollow bolt with cross drilled hole. Attaches the high pressure hose to the caliper.

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 14001 -

Reproduction barrel nut or insert for attaching "Cougar" fender script to the fenders. Each Cougar emblem uses 4 of these barrel nuts which insert into the fender first, and then the Cougar emblem. Additionally, these nuts also go into the C pillars for attaching the XR7 badge or medallion on each side. Two barrel nuts per side for the XR7 medallions. Barrel nuts sold individually. The install is basically the same as shown here: https://youtu.be/mcd788WUNns ...

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26192 -

Barrel nut for the 3/16" stud found on the 6.5 Liter badge and the GT badges that mount on the fender of 1967 Mercury Cougar and Mercury Cyclone GT with the S code 390 engine. Same GT badge on the 1968 Mustang GT models. Item sold individually. The install is basically the same as shown here: https://youtu.be/mcd788WUNns

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27480 -

Tubular or barrel nut for attaching our reproduction "C" pillar XR7 emblems with studs. We found these fasteners to install the emblems without disturbing the headliner of a 1967-68 Mercury Cougar. These are also suitable for installing this emblem onto the trunk lids of 1971-73 Mercury Cougar XR7 models. The originals were flat backed and glued onto the deck lids with adhesive. These tubular nuts require two 7/32" holes be drilled. These mount on the lower part of the roof behind the...

Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24352 -

C8AF-9600-C Standard air cleaner base for all 1968 289-2V (C code), 302-2V (F code), 302-4V (J code), and 390-2V (X code). This is for a closed emissions system (IMCO), that included an oil cap with a fitting going to the air cleaner base and a PCV valve in the passenger side valve cover. About 17.84" inches in diameter. Identified with round nuts welded on the inside for mounting the air cleaner snorkel. Otherwise the same as C8AF-9600-G. Ford part number C8AZ-9600-D.*Note - Canada did not...

Price: $102.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24237 -

C7ZF-9600-C Air cleaner base for both the 289-2V and 289-4V engines. About 17.25" inches in diameter. 49 state open PCV system. No dents, dings, rust or other damage. *Note - This air cleaner base was often installed on 1968 Mercury Cougar and Ford Mustangs with Canadian DSO's, or cars originally shipped to Canada which had open emissions systems.*Excludes California. Ford part number C5ZZ-9600-D. Notice the lack of metal elbow for venting back to the oil filler cap. Click on images to...

Price: $47.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20242 -

Good used air cleaner base with none of the attaching parts. Will have a dent, rust inside or other repairable flaw. Correct for 289 2V or 4V non California Emissions equipped Cougar.*Note - This air cleaner base was often installed on 1968 Mercury Cougar and Ford Mustangs with Canadian DSO's, or cars originally shipped to Canada which had open emissions systems.

Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25262 -

D1AF-9600-FA Air cleaner base for all 1971 Cougars with the H code 351-2V engine. About 17.84" inches in diameter. Could also be found with casting number D1AF-9600-FB or D1AF-9600-FC. Click on images to enlarge. Ford part number D1AZ-9600-F. ...

Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25494 -

D2AF-9600-BC Air cleaner base for all 1972 H code 351-2V engines. About 14.78" inches in diameter. Ford part number D2AZ-9600-B.

Price: $66.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25600 -

D3ZF-9600-AA Air cleaner base for all 1973 H code 351-2V engines. About 14.75 inches in diameter. Ford part number D3ZZ-9600-A.  Does not include snorkel.

Price: $385.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25540 -

D2ZF-9600-EA Air cleaner base for all 1972 Q code 351CJ engines. About 16.79" inches in diameter. Could also be found under casting number D2ZF-9600-KA. Ford part number D2ZZ-9600-E.

Price: $102.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25199 -

D0ZF-9600-M Air cleaner base for all 351C engines, both H code 351C-2V and M code 351C-4V engines. Could also be found under casting number D0ZF-9600-Z. About 17-3/4" inches in diameter (although the Ford MPC shows it to be 17.00 inches). *Excludes 1970 351-2V Windsor engines. Ford part number D0ZZ-9600-M.

Price: $98.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24353 -

C8AF-9600-G Standard air cleaner base for all 351 engines, H code 351-2V and M code 351-4V. About 17.84" inches in diameter. Identified with the square nuts welded on the inside for mounting the air cleaner snorkel. Otherwise the same as C8AF-9600-C. Ford part number C8AZ-9600-D.

Price: $125.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25196 -

D0ZF-9600-B Air cleaner base for 1970 H code 351-2V Windsor engines. About 17.84" inches in diameter. Ford part number D0OZ-9600-B. *Excludes 351C Cleveland engines. Click on images to enlarge. ...

Price: $798.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20283 -

This air cleaner was used on the 1967 GT Cougar only. It was possible to order a 390 GT motor for your Cougar without ordering the 390 GT package. Cougars equipped with the 390 6.5 Litre engine that did not come with the GT package would have used the air cleaner with a long tapered snorkel and painted lid. Cougars sold in California had the 90 degree elbow for the closed emissions system. *NOTE* Please keep in mind that our hard to find parts like this are not always competitively priced with...

Price: $798.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24238 -

C7ZF-9600-F Air cleaner base for 390-4V with GT package. Unique air cleaner without a snorkel. Instead it has dual rectangular inlets covered by metal screens or expanded metal. About 16.79" inches in diameter. California open PCV emissions system with Thermactor air pump. Ford part number C7ZZ-9600-F. Click on images to enlarge. ...

Price: $432.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24083 -

Factory air cleaner base the all S code 1967 Mercury Cougar non-GT or the 6.5 Liter option, 1967 Mustang 390-4V without the GT option, and 1967 Ford Thunderbird with Z code 390-4V or Q code 428-4V engines. California emissions version which has the closed emissions. Note the elbow on the side which attaches with a hose to the oil fill cap.This is the one everyone uses to make a correct 1969-70 428 Cobra Jet ram air or 1967 GT air cleaner base . This basic bowl design was used by the Ford...

Price: $432.86

Buy Details

Availability: Out of Stock
Item #: 10996 -

Factory air cleaner base for all S code 1967 Mercury Cougar non-GT or with the 6.5 Liter option, 1967 Mustang 390-4V without the GT option, and 1967 Ford Thunderbird with Z code 390-4V or Q code 428-4V engines. 49 state versions like this do not have the steel elbow on the air cleaner side which became standard on cars beginning in 1968.

Price: $181.85

Buy Details

Availability: In-Stock Item
Item #: 15868 -

Reproduction battery heatshield that fits many applications from 70-73, on most hi-performance engines. It was often the first part discarded but serves a real purpose.

Price: $59.15

Buy Details

Availability: In-Stock Item
Item #: 30668 -

Reproduction group 27 battery heat shield that fits many Mercury Cougar and Ford Mustang applications from 1967-70, on most hi-performance engines. It was often the first part discarded but serves a real purpose. Nice American made part, stamped with Ford numbers C7ZB10A682B and C7OB10A682B. There is also a D0... sized for group 24 heat shield offered for 1970-73. *Trivia - these battery heat shields were often trimmed down to fit group 24 batteries.Click on the link below to find some...

Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 42000 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. Standard Draw pictured above, High Draw pictured to the left. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part # : C7ZZ-14300 ...

Price: $73.85

Buy Details

Availability: In-Stock Item
Item #: 42007 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. For 1972-73 Mercury Cougar and Ford Mustang all with V-8 engines.Positive cable is 10 1/4" center to centerNegative cable is 42" center to centerGround wire is 41" center to center Replaces Ford Part # :...

Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 41981 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. For any 1970-71 Mercury Cougar or Ford Mustang with 302 or 351 engine and 43-55 AMP alternators. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces...

Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 41863 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. For all 1972-73 Mercury Cougar or Ford Mustang with 43-55 AMP alternators and V-8 engines. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part...

Price: $73.85

Buy Details

Availability: In-Stock Item
Item #: 41988 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. 1970-71 Mercury Cougar with 65-75 AMP alternators and V-8 engines. The originals were either 43-55 Amp (Standard) Draw or 65-75 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part # : D0ZZ-14300 ...

Price: $73.85

Buy Details

Availability: In-Stock Item
Item #: 41998 -

Each of these great OEM Style kits include all three required cables, proper terminal and post clamp ends. Unlike CONCOURS CORRECT cables, these do not have the Ford part numbers on them. Starter cables are properly shielded from heat. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part # : C8ZZ-14300- ...

Price: $69.85

Buy Details

Availability: In-Stock Item
Item #: 41990 -

Each of these great kits include all three required cables, including part numbers, proper terminal and post clamp ends. Starter cables are properly shielded from heat. The originals were either 43-55 Amp (Standard) Draw or 65-70 Amp (High) Draw. We recommend going with the High Draw. As one customer put it, "These [standard draw cables] look anemic." (Thanks for the feedback Charles!) Replaces Ford Part # : C8ZZ-14300

Price: $5.25

Buy Details

Availability: In-Stock Item
Item #: 14-0020 -

No more crust, white powdery battery terminals. Just spray this stuff on, and after a few minutes....simply wash off with water! Not only can you use this stuff on your car, you can use it on your ATV's, quads, dirt bikes and even your ride on lawnmower! A handy item to have laying around your garage. Of course, there's a little more messy, mostly free alternative which you can find the ingredients for online, but why bother? This is a simple, fairly cheap product to have.  

Price: $50.55

Buy Details

Availability: In-Stock Item
Item #: 15996 -

Everything you need to hold the battery down on your 71 -73 Cougar or Mustang. Included in this kit are the two stainless steel J-bolts, the hold down bracket and the hold down clamp.

Price: $14.05

Buy Details

Availability: In-Stock Item
Item #: 25986 -

Perfect fit the first time. You will be happy with this Group 24, quality reproduction and check out the price! These battery trays are a popular item for restorers since most of the originals have been destroyed by leaking batteries over the years. Replaces Ford part #: C7ZZ-10732-D.

Price: $174.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30631 -

Good used group 24 tray for 1968-70 Mercury Cougar or Ford Mustang. Assembly line installed group 24 battery tray, for those that want to keep it very original, this is getting to be a hard to find part with no rot (will show pitting).

Price: $122.65

Buy Details

Availability: In-Stock Item
Item #: 25993 -

This is what I consider to be "Premium Quality". Very correct in every detail and made in the US! The group 27 larger tray was optional on any Cougar and standard on big block Cougars. Replaces Ford part # C9ZZ-10732-AR

Price: $115.88

Buy Details

Availability: Out of Stock
Item #: 31918 -

NOS service replacement battery tray, may not be exactly like the assembly line tray. Group 27 battery tray is typical for cars with air conditioning and higher amp alternators. Fits 1971-73 Mercury Cougar and Ford Mustang. Also 1970-71 Ford Torino and Mercury Cyclone and variants of the B or C midsize Ford and Mercury bodied cars.  Replaces Ford Part #: D0OZ-10732-B.

Price: $19.55

Buy Details

Availability: In-Stock Item
Item #: 25994 -

Exactly like the originals. This group 27 battery trays are a popular item for restorers since most of the originals have been destroyed by leaking batteries over the years. Fits 1971-73 Mercury Cougar and Ford Mustang. Also 1970-71 Ford Torino and Mercury Cyclone and variants of the B or C midsize Ford and Mercury bodied cars. Supplier misidentifies this part as D1ZZ-10732-B. Replaces Ford Part #: D0OZ-10732-B.

Price: $43.55

Buy Details

Availability: In-Stock Item
Item #: 41867 -

Concourse Correct with 22 & 24 series batteries for Mustang, Cougar and Shelby GT350/500 made in the USA by Mansfield Mustang to orig. Ford Specs includes attaching bolts Replaces Ford Part # C8ZZ-16060-A

Price: $44.95

Buy Details

Availability: Out of Stock
Item #: 41848 -

Concourse Correct with 22, 24 & 27 series batteries for Mustang, Cougar and Shelby GT350/500 made in the USA to original Ford Specifications, includes attaching bolts. Replaces Ford Part # C9ZZ-16060-A or C9ZZ-16052-P .

Price: $40.65

Buy Details

Availability: In-Stock Item
Item #: 41866 -

Concourse correct with 22 & 24 series batteries for Mustang, Cougar and Shelby GT350/500 made in the USA by Mansfield Mustang to orig. Ford Specs includes attaching bolts Replaces Ford Part # C7ZZ-16060-A

Price: $7.74

Buy Details

Availability: In-Stock Item
Item #: 41105 -

Reproduction Battery Tray Bolts & U Nuts for the 1968 Mercury Cougar / Ford Mustang

Price: $11.12

Buy Details

Availability: In-Stock Item
Item #: 12-1017 -

For those cold days in the garage, keep your head warm with our 100% acrylic knit 8" beanie. Classic black color with an embroidered WCCC walking cat logo on the front. Also works as a head collision absorber for those who own 1970 Cougars and work under the hood (you know what we mean). Great gift idea for Cougar fans, and for those who prefer beanies over baseball hats.

Price: $50.55

Buy Details

Availability: Out of Stock
Item #: 13000 -

New axle bearing for any 8 or 9 inch Ford rear end with 28 splined axles. Common on all Mercury Cougar and Ford Mustang with V-8 engines. Excludes 31 splined axles as found on Boss and Cobra Jet cars.These should be professionally installed with a bearing press.

Price: $17.15

Buy Details

Availability: In-Stock Item
Item #: 12351 -

New front Inner wheel bearing with cup / race for original drum and disc brakes for all 1970-73 Mercury Cougar and 1970-73 Ford Mustang with V-8 engines. These are tapered bearings with cone or race. Inner diameter is 1.378 inches. These are dry bearings, meaning they will need to be packed with chassis bearing grease, prior to installation. A smaller outer bearing and this inner bearing are required for each side. Two of each needed for the front wheels. *Note - This bearing only fits the...

Price: $15.85

Buy Details

Availability: In-Stock Item
Item #: 11972 -

New front outer wheel bearing with cup / race for original drum and disc brakes for all 1970-73 Mercury Cougar and 1970-73 Ford Mustang with V-8 engines. These are tapered bearings with cone or race. Inner diameter is 0.865 inches. These are dry bearings, meaning they will need to be packed with chassis bearing grease, prior to installation. A large inner bearing and this outer bearing are required for each side. Two of each needed for the front wheels. *Note - This bearing only fits the...