Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 12241-12288 of 13234
$136.00 Price: $494.40

Buy Details

Availability: Out of Stock, Discontinued
Item #: 20156 -

NEW SUPPLIER! Premium reproduction wheel lip mouldings for the 67-68  Cougar. These mouldings are stamped to original factory specs using quality aluminum, with correct contours and anodized finish.  Only sold as a set of 4, hardware not included. ...

$0 Price: $314.87

Buy Details

Availability: Out of Stock
Item #: 20422 -

Good set of four used wheel lip mouldings for your 1969 - 1970 Mercury Cougar. What is considered to be an "acceptable core" is solely at our discretion. If you are in question as to what good cores are, please send quality, in focus, close-up digital pictures to westcoast@classic-cougar.com *NOTE* Some "on the edge" cores that need extra labor can be given a partial credit.*Note - This is a core exchange item only, trim will not ship until your acceptable moulding core is received by WCCC....

$0 Price: $65.57

Buy Details

Availability: Out of Stock
Item #: 12667 -

This is a core five piece set of front windshield mouldings for a 1967 - 1968 Mercury Cougar and Mustang (except fastback). These mouldings need restoration as they are dull, scratched and dinged. They would suffice to make a car complete if you were wanting to drive it but in our opinion they are a step below "good" driver quality. This set will not have any kinks, flattened out areas or holes, we discard mouldings of that description. We do not recommend the reproduction, "offshore"...

$0 Price: $60.17

Buy Details

Availability: Out of Stock
Item #: 12724 -

This is a core five piece set of front windshield mouldings for a 1969 - 1970 Mercury Cougar Or Mustang (except fastback). These trim parts need restoration as they are dull, scratched and dinged. They would suffice to make a car complete if you were wanting to drive it but in our opinion they are a step below "good" driver quality. This set will not have any kinks, flattened out areas or holes, we discard trim parts of that description. We do not recommend the reproduction, offshore mouldings...

$0 Price: $209.88

Buy Details

Availability: Out of Stock
Item #: 20429 -

This original FoMoCo, five piece windshield trim set has been lovingly restored to far beyond the original luster. Stunning brilliance, perfect match for that high end paint job. Because these pieces are restored original pieces, they will have far superior fit and finish when compared to "offshore" reproductions. This package is also an excellent option for you Mustang owners as well (except fastback). Ford part numbers include: C9ZZ-6503136-A, C9ZZ-6503137-A, C9ZZ-6503144-A, C9ZZ-6503148-B,...

$0 Price: $121.86

Buy Details

Availability: Out of Stock
Item #: 20295 -

This "offshore" set of low quality reproduction windshield mouldings / trim are sold only as a set. You will not want to mix and match these reproduction units with used because the color and quality will not match. These are guaranteed to look bad and fit even worse. No returns, no exchanges. We strongly suggest that you purchase our restored or good used set. And yes, these are the exact same trim parts supplied by the other vendors with a completely different description. Check out our...

$0 Price: $148.86

Buy Details

Availability: Out of Stock
Item #: 27302 -

*NOTE*   Due to the difficulty in obtaining 69 aluminum trim we no longer sell these without first having you send us your cores.  Keep in mind we pay well for quality 69 hood lip mouldings.  Do not contact us with pretzel shaped parts, parts you have attempted to fix or flattened out parts.  We need trim parts showing only minor dings / dents, scratches and dullness.  Decent used trim part that would look good on a daily driver. This purchase requires that you...

$0 Price: $419.27

Buy Details

Availability: Out of Stock
Item #: 31248 -

Correctly restored hood lip and eyebrows with bright dip clear coat anodized coating. Requires that you send your cores in advance.  Ford part number: Hood lip C9GY-16856-A, RH trim C9GY-16164-A, LH Trim C9GY-16165-A

$0 Price: $18.86

Buy Details

Availability: Out of Stock
Item #: 23354 -

Bolt that goes through the air pump mounting bracket. Pump rotates on this bolt. Bolt size 3/8"-16 x 4.25" long.

$0 Price: $57.85

Buy Details

Availability: Out of Stock
Item #: 20365 -

Factory spare tire hold down bolt for 1969-70 Mercury Cougar convertibles with style steel wheels. Note the felt and jack placement. Overall length 12-1/4 inches. As always, the threads are 1/2"-13.

$0 Price: $50.85

Buy Details

Availability: Out of Stock
Item #: 24820 -

Unique to 1970 convertible only. Only with stock steel wheels and hubcaps. J bolt MPC lists the length as 6-1/4 inches, with 4 inches on the end threaded but actually there are only 2 1/2" on the threads. Threads 1/2-13.

$0 Price: $24.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25406 -

1971 - 1973 Convertible spare tire mounting, J bolt. MPC lists the total length as 9-1/2 inches long, and 5 inches threaded. Application is for hubcap type wheels only, those of you fortunate to have the style steel wheels need C8OZ-1448-A above.

$0 Price: $22.85

Buy Details

Availability: Out of Stock
Item #: 24524 -

For all 1969 Mercury Cougar trunks. The MPC lists the correct length as 8-3/4 inches in total length, with 4 inches of the end being threaded but we have found without fail them to be about 10 3/4" with about 3" of threads. I say "about because some have a blunt end while other versions have a tappered end which will add about 1/8" to the length. Those threads are 1/2-13.

$0 Price: $89.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15158 -

Cast iron pedestal mount for the air conditioning compressor on all 1970 Mercury Cougars and Ford Mustangs with the 351W H code 2V engine. Ford also used this bracket on other 1970-71 Ford passenger cars with 351W engines only.Ford casting number D0AA-2882-E.

$0 Price: $495.00

Buy Details

Availability: Out of Stock
Item #: 11037 -

Bracket used to mount the thermactor air pump. Casting number C9ZE-9B450-A or C9ZE-9B450-B. Ford part number C9ZZ-9B450-B

$0 Price: $185.04

Buy Details

Availability: Out of Stock
Item #: 11035 -

Cast iron construction similar to the 1969 bracket but with a design change for 1970. We suspect that the change was made for the new pulley and bracket arrangement starting in 1970. Ford part number D0ZZ-9B450-B.

$0 Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 24394 -

Used alternator bracket for any 1968-69 Mercury Cougar or Ford Mustang with 289 / 302 / 351W engine, but without factory smog pump.Replaces Ford part number C8OE-10156-A.*Trivia - the only difference between this bracket, and the C6OE-10156-A bracket is the thickness of the steel. Either one will work on 289/302/351W engines 1966-69.

$0 Price: $54.86

Buy Details

Availability: Out of Stock
Item #: 23863 -

C5TE-10156-A Alternator mounting bracket for most 1967 Mercury Cougar and Ford Mustang with 390 engine. Ford master part number C5TZ-10156-A. *Note - Excludes cars with California DSO's with smog pump.

$0 Price: $185.85

Buy Details

Availability: Out of Stock
Item #: 25203 -

Special rear mounting bracket for 1970 Boss 302 Cougar Eliminators and Ford Mustang. Triangular shaped bracket as shown. Ford part number D0ZE-10A336-A.

$0 Price: $99.86

Buy Details

Availability: Out of Stock
Item #: 30622 -

Used brake booster mounting bracket for the 66 - 71 Ford Fairlane, Ranchero and Cyclone

$0 Price: $72.86

Buy Details

Availability: Out of Stock
Item #: 10722 -

D0ZZ-9D664-A Bracket for mounting the charcoal canister to the body. Application - all 1970 California sold Mercury Cougar and Ford Mustangs. Some Ford illustrations show a casting number of D0ZF-9D664-A

$0 Price: $13.86

Buy Details

Availability: Out of Stock
Item #: 18526 -

This special bracket gets glued to the windshield. Rear view mirror bracket gets mounted to it. Glass bead blast it or just use a wire brush and it is ready to go!

$0 Price: $18.89

Buy Details

Availability: Out of Stock, On Order
Item #: 13801 -

Good reproduction but our used unit is a better value and will clean up just as nice.

$0 Price: $34.88

Buy Details

Availability: Out of Stock
Item #: 25497 -

Bracket mounts to top of stock cast iron Cleveland intake manifold, holding the throttle cable. All 351C engines, 351-2V and 351-4V. Fits any 1972-73 Mercury Cougar or Ford Mustang with original H or Q code 351C engines. The earlier bracket found on the 1971-72 cars will also work and is stamped slightly differently.Replaces Ford part number D2AZ-9728-A.

$0 Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 25098 -

Bracket that mounts in both the rear Carburetor mounting holes of all 1970 351 Cleveland 4 barrel engines with stock Autolite 4300 carburetors. Has the square hole that holds the factory throttle cable. Replaces Ford part number D0OZ-9741-B.*Note - Not for use with 351 Windsor engines.

$0 Price: $248.85

Buy Details

Availability: Out of Stock
Item #: 25244 -

Bracket mounts to the intake manifold. With square throttle cable mounting hole and return spring mounting hole. 1970 only, bracket that utilized the two raised mounting bosses cast into the cast iron 428 Cobra Jet intake manifolds.

$0 Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 25478 -

Bracket mounts to top of intake manifold, holding the throttle cable. *Note - Used prior to 3/15/1971.

$0 Price: $61.88

Buy Details

Availability: Out of Stock
Item #: 25274 -

Bracket mounts to top of intake manifold, holding the throttle cable. *Note - Used after 3/15/1971.

$0 Price: $149.85

Buy Details

Availability: Out of Stock
Item #: 25243 -

Bracket that holds the throttle cable for the G code Boss 302 Cougar Eliminators. This is a 1970 part number, it is possible that the 1969 bracket may be either different or had a C9ZZ-9741-? part number. Will update when we verify, comments welcome. 1970 Ford part number listed as D0ZZ-9741-A.

$0 Price: $349.85

Buy Details

Availability: Out of Stock
Item #: 33633 -

NOS driver side headlight bucket for the 1967 - 1968 Mercury Cougar. This bucket will show some shelf wear / flaked paint. The Service Replacement headlight buckets were not painted the correct shade of black. *NOTE* These parts are far more important than most people realize. If they structural integrity for any reason be it rust, collision or failed spot welds, you will be damaging your grille in a very short time. The vacuum actuators housed in these brackets are very powerful and if these...

$0 Price: $284.27

Buy Details

Availability: Out of Stock
Item #: 41556 -

If your Cougar came from a region that uses road salt your buckets are probably rusted in the corners or worse. Our dry "West Coast" buckets are 100% rust free and the mounting tabs are not broken from the removal of stubborn bolts. They will not be bent or damaged in any way. Keep in mind we do have grade B brackets for much less money that only have minor bends or blems that could be easily corrected. *NOTE* These parts are far more important than most people realize. If they lack structural...

$0 Price: $349.27

Buy Details

Availability: Out of Stock
Item #: 33634 -

NOS passenger side headlight bucket for the 1967 - 1968 Mercury Cougar. This bucket will show some shelf wear / flaked paint. The Service Replacement headlight buckets were not painted the correct shade of black. *NOTE* These parts are far more important than most people realize. If they lack structural integrity for any reason be it rust, collision or failed spot welds, you will be damaging your grille in a very short time. The vacuum actuators housed in these brackets are very powerful and...

$0 Price: $36.86

Buy Details

Availability: Out of Stock
Item #: 25082 -

These are the U-shaped brackets that hold the round part of the rear sway bar. These mount to the rear frame rail. All 1970 - 1973 Cougars should have these mounting holes from the factory, 1969 and earlier Cougars do not have these holes. Two clamps needed for installation.

$0 Price: $23.64

Buy Details

Availability: Out of Stock
Item #: 33845 -

Concours Correct low head carriage bolts and flange nut fastener kit for the 67 - 68 Cougar and MustangOne kit does both shock tower covers

$0 Price: $29.09

Buy Details

Availability: Out of Stock
Item #: 33846 -

Concours Correct low head carriage bolts and flange nut fastener kit for the 69 - 70 Cougar and Mustang One kit does both shock tower covers

$0 Price: $47.70

Buy Details

Availability: Out of Stock, On Order
Item #: 11330 -

Reproduction support brace to be used with 1967-70 Mercury Cougar and Ford Mustang export braces. Can be used with OEM, NOS or reproduction export braces. Contoured to match the curvature of the cowl.*Note - Will not fit early Shelby Mustangs.This part never came from the factory, but the idea was taken from the fact that Shelby cars had plates like these, though these are not interchangeable with Shelby export braces or export brace plates because of hole placement. The original Shelby part...

$0 Price: $21.85

Buy Details

Availability: Out of Stock
Item #: 10234 -

Reproduction mounting bracket. This is the mounting plate for the end links on the factory rear sway. Mercury Cougar 1970-73 only, this is not a Mustang part. The tab for the end links are mounted forward of the rear axle towards the outside of the car. These plates get sandwiched between the shock mounting plates and the Isolator clamps on your rear axle assembly. Sold individually and you will need two for the installation. Left is the same as right. The total width of this plate at its very...

$0 Price: $75.87

Buy Details

Availability: Out of Stock
Item #: 25147 -

This is the mounting plate for the end links on the factory rear sway bar. The tab for the end links are mounted forward of the rear axle towards the outside of the car. These plates get sandwiched between the shock mounting plates and the Isolator clamps on your rear axle assembly. Sold individually and you will need two for the installation. Left is the same as right. The total width of this plate at its very widest part is 7 7/8". Found on all 1970-73 Mercury Cougar with factory competition...

$0 Price: $41.27

Buy Details

Availability: Out of Stock
Item #: 16185 -

Used mounting bracket. This is the mounting plate for the end links on the factory rear sway bar. The tab for the end links are mounted forward of the rear axle towards the outside of the car. These plates are mounted with the shock mounting plates on your rear axle assembly. Sold individually and you will need two for the installation. Left is the same as right. Replaces Ford part number D0ZZ-5A775-A.NOTE: These are only a few of these in stock, and they will have moderate pitting.Mustang...

$0 Price: $40.86

Buy Details

Availability: Out of Stock
Item #: 21614 -

Spare tire, with styled steel wheel hold down disc. Fits all 1968-70 Mercury Cougar and Ford Mustang.  About 3 inches in diameter, this is the specified trunk hold down plate for the use with the factory mag wheels. We won't always have the used in stock, but the reproduction version is very good.Replaces Ford part number C8MY-1424-A.

$0 Price: $17.85

Buy Details

Availability: Out of Stock
Item #: 23872 -

Plate for mounting the spare tire. 4 inches outside diameter with the 3 tabs.

$0 Price: $8.05

Buy Details

Availability: Out of Stock
Item #: 15539 -

3 1/8" Style Steel Wheel Spare Tire Hold Down. Available in Black or Chrome. Ford Master Parts Catalog indicates that this hold down was found on some 68 and 69 Cougars with SS Wheels. You may need to bend the ears in slightly to get them to fit properly inside the hole in the center of the wheel. Replaces Ford Part #: C8MY-1424-A.

$0 Price: $124.88

Buy Details

Availability: Out of Stock
Item #: 30467 -

Pair of used assembly line installed 1970 Mercury Cougar Eliminator rear spoiler brackets. Brackets only, no fasteners or spacers. Sold as a pair as shown, right and left side brackets. Can only be used with 1970 trunk lids. 1970 trunk lids have a slot cut out on each side for locating the rear wings. Not used on the 1969 Cougar Eliminator.We also stock the reproduction kit which includes fasteners. See in related items.

$0 Price: $32.85

Buy Details

Availability: Out of Stock
Item #: 24466 -

Aluminum spacer for the alternator mounting bracket on 1971 Mercury Cougar and Ford Mustang with 429 Cobra Jet engines. Also fits 1970-71 Cyclone and Torino with 429CJ engines. Spacer measures approximately 2-7/8 inches long. Fits between the engine and alternator mounting bracket.

$0 Price: $17.87

Buy Details

Availability: Out of Stock
Item #: 32167 -

These spacers are required to properly mount the trunk lock housing to the trunk. Two required per car, sold individually. Ford part number C7WY-6543565-A. Check out this video

$0 Price: $325.00

Buy Details

Availability: Out of Stock
Item #: 33666 -

Used Nodular Iron 9 inch third member case, known as "N" - Case. typically found in 1973 and newer Ford products, mostly F100 and Bronco.  These are the factory installed heavy duty third members typically with 31 splined axles. These are bare cases as shown. Current dates available: There are other versions of the Nodular iron third members. Non-"N", lazy "N", and square "N" this version. See related items.  Please have your desired date in mind when calling or place it in...

$0 Price: $399.87

Buy Details

Availability: Out of Stock
Item #: 30530 -

Used Nodular Iron 9 inch third member case, known as "N" - Case. typically found on cars with 427-4V, 428CJ, 429CJ, Boss 302, Boss 351, or Boss 429. These are the factory installed heavy duty third members typically with 31 splined axles. These are bare cases as shown. Current dates available:There are other versions of the Nodular iron third members. Non-"N", lazy "N" like this one, and square "N". See related items.  Please have your desired date in mind when calling or place it in...

$0 Price: $399.87

Buy Details

Availability: Out of Stock
Item #: 33665 -

Used Nodular Iron 9 inch third member case, known as "N" - Case. typically found on 1968-69 Mercury Cougar and Ford Mustang with 427-4V, 428CJ, Boss 429, and Boss 302. These are the factory installed heavy duty third members typically with 31 splined axles. These are bare cases as shown. Current dates available: There are other versions of the Nodular iron third members. Non-"N" this version, lazy "N", and square "N". See related items.  Please have your desired date in...