Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 4705-4752 of 5492
Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 11-0330 -

Heater door for any 1967-73 Mercury Cougar or Ford Mustang with factory or integral air conditioning. The heater door allows air to pass over the heater core in the A/C box. This is the smallest door in the A/C box, and the one subject to the most damage from moisture. Part cleaned for photograph, normally will ship 'as removed'. Inspected for excessive rust pitting or weakness of the metal, they all will have a slight amount of metal degradation from being assembled as bare metal. Door only,...

Price: $189.77

Buy Details

Availability: Out of Stock
Item #: 32043 -

This listing is for the outer doors pieces only, Cougar and Mustang are identical. These original NOS FoMoCo parts fit better and will last longer than repro.Ford part numbers C7ZZ-6521453-A  and  C7ZZ-6521452-A

Price: $114.57

Buy Details

Availability: Out of Stock
Item #: 18666 -

This is a restored set of original, stainless steel, restored door edge guards. They have been straightened and polished to beyond factory standards. Even the backside has been polished to a mirror like luster.  NOTE: This item will not ship until restorable cores are received.

Price: $175.85

Buy Details

Availability: Out of Stock
Item #: 33116 -

New old stock driver side door handle the 1967-68 Mercury Cougar and 1965-70 Ford Mustang. This handle is NOS, NOS doesn't always mean high quality plating. Includes mounting hardware and pads. Round button not included. Replaces Ford Part #: C4DZ-6222405-A

Price: $175.85

Buy Details

Availability: Out of Stock
Item #: 33117 -

New old stock passenger side door handle the 1967-68 Mercury Cougar and 1965-70 Ford Mustang. This handle is NOS, NOS doesn't always mean high quality plating. Includes mounting hardware and pads. Round button not included. Replaces Ford Part #: C4DZ-6222404-A

Price: $69.89

Buy Details

Availability: Out of Stock
Item #: 11706 -

We highly recommend restoring our rust free Western hinges over using reproduction hinges. The main reason the originals are better than the Taiwan made reproductions is fit. If there is anywhere in which you want a precision fit it is in the hinges. These hinges have not been worn to the point of being "hogged out" and have been carefully inspected for cracks. You will want to purchase a new hinge pin and 2 bushings though. This icon means that we're looking to buy this part!WCCC is a buyer...

Price: $46.82

Buy Details

Availability: Out of Stock
Item #: 42054 -

Kit replaces one side. Contains all necessary parts including pins, bushings, a new cam plate, spring, and roller to rebuild both upper and lower hinges. This kit is for the cast iron type hinges found on the 1967 and early 1968 Cougar.Replaces Ford Part #: C5ZZ-6522800-K.

Price: $315.14

Buy Details

Availability: Out of Stock, Discontinued
Item #: 17-0011 -

These four original hinges have been rebuilt with steel sleeves to retain the over-sized oil impregnated bushings. They feature hollow hinge pins which allows grease to fill the steel tube, lubricating the bushings under pressure from the inside-out. The threaded Zerk fittings are easily accessible from inside the car when the door is opened and are guaranteed to NEVER wear out or we will rebuild them for FREE! This offer has been in place for 20+ years by our rebuilder and they have never...

Price: $165.87

Buy Details

Availability: Out of Stock, Discontinued
Item #: 17-0004 -

These two original hinges have been rebuilt with steel sleeves to retain the over-sized oil impregnated bushings. They feature hollow hinge pins which allows grease to fill the steel tube, lubricating the bushings under pressure from the inside-out. The threaded Zerk fittings are easily accessible from inside the car when the door is opened and are guaranteed to NEVER wear out or we will rebuild them for FREE! This offer has been in place for 20+ years by our rebuilder and they have never been...

Price: $165.87

Buy Details

Availability: Out of Stock, On Order
Item #: 17-0003 -

These two original hinges have been rebuilt with steel sleeves to retain the over-sized oil impregnated bushings. They feature hollow hinge pins which allows grease to fill the steel tube, lubricating the bushings under pressure from the inside-out. The threaded Zerk fittings are easily accessible from inside the car when the door is opened and are guaranteed to NEVER wear out or we will rebuild them for FREE! This offer has been in place for 20+ years by our rebuilder and they have never been...

Price: $179.87

Buy Details

Availability: Out of Stock
Item #: 12223 -

Whenever you take on a door job, its always handy to have a few things available....a helper, a floor jack and a door hinge wrench. While a helper and floor jack might not always be available, a door hinge wrench is a valuable tool to have around when removing / setting a door. This Snap on obstruction wrench (google snap on part # S9608B) is specially curved to allow you to gain access to a few of those hard to reach bolts on your door hinges. We will loan this door hinge wrench for 60 days,...

Price: $11.88

Buy Details

Availability: Out of Stock, On Order
Item #: 11-0270 -

Used original door latch rod for the interior push button lock on the passenger side (right hand) of the Mercury Cougar or Ford Mustang.Ford part # C8ZZ-6521852-A.

Price: $10.89

Buy Details

Availability: Out of Stock
Item #: 24363 -

This is an original chrome lock knob used on 1968 and up Fords with no peeling chrome or obvious scratches. If you compare the originals to the reproductions we have listed you will see a distinct difference. This is for the very particular restorer who really is concerned about detail, especially on prominent pieces like this. Sold individually, very limited supply.Original Ford part number is C8AZ-6221850-A

Price: $25.88

Buy Details

Availability: Out of Stock
Item #: 11-0367 -

Good original passenger side door latch rod set. Includes rod for inside lock, outside key lock, and outside door release actuating rod. These are good used parts and are a better quality and value compared to the reproductions. Only fits passenger side doors of 1968 Mercury Cougar and Ford Mustang. 1968 door latches are unique, they have a longer tab for the inside door lock knob typically. Check out our handy diagram below to find other '67-'68 door parts you may need. All the item numbers...

Price: $785.85

Buy Details

Availability: Out of Stock
Item #: 15853 -

Here is an example of what you can expect from a grade "A" pair of 1968 decor door panels from us. These are given the grade "A" rating because there is minimal discoloration of the mylar trim surrounding the horizontal basket weave pattern, chrome peeling from the walling cat emblem and light general wear. These panels are very hard to find in grade "A" condition. Keep in mind these listings are just a sample of what we often have on hand. We are not able to list all of our used panels and...

Price: $619.88

Buy Details

Availability: Out of Stock
Item #: 19298 -

Here is an example of what you can expect from a grade "A" pair of 1968 decor door panels from us. These are given the grade "A" rating because there is minimal discoloration and light general wear. These panels are very hard to find in grade "A" condition. Keep in mind these listings are just a sample of what we often have on hand. We are not able to list all of our used panels and ask that you email or call for stock on hand. Most of our panels range in price from $250-$600.NOTE: The...

Price: $384.89

Buy Details

Availability: Out of Stock
Item #: 15857 -

Here is an example of what you can expect from a grade "B" pair of 1968 decor door panels from us. These are given the grade "B" rating because of the obvious wear and discoloration. These panels are very hard to find in grade "A" condition. Most of our panels range in price from $250-$550. NOTE: The pictures shown here are file photos from sets we have sold in the past and are not the actual panels or color you will receive. Please email or call for current colors and conditions of stock on...

Price: $545.85

Buy Details

Availability: Out of Stock
Item #: 23435 -

The Best To Be Found. Grade "A" doors have never been dented in, cracked in the door latch area or rusted along the bottom seam. There are no drilled holes for an after market impact strip and the sound deadener is still intact. Occasionally it will still bear the original paint but do expect multiple small door dings. This is the best condition Western door you could ever hope to find, satisfaction guaranteed. Included in the price is a wooden crate, discount applies when you pick it up in...

Price: $149.85

Buy Details

Availability: Out of Stock
Item #: 23885 -

These NOS sill plates always have some degree of shelf wear due to the many years they have been shuffled around. The biggest difference you will see with NOS vs. the two different levels of reproductions is the finish. The NOS parts are far less bright and less prone to showing hairline scratches. One other benefit is that NOS sill plates already have the FORD decal in place. Sold individually.

Price: $40.95

Buy Details

Availability: Out of Stock, On Order
Item #: 14974 -

These interchange left to right, they are a mirror image of one another. We recently did a side by side comparison of these so called "concours" sill plates and found very little difference when comparing them to the "economy" version... They both weigh .52 pounds, just like our NOS sill plates. They both have a high of luster, unlike the originals which featured very little "shine". We found the screw holes to be just a tad larger on the economy version but once the screw is inserted you...

Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 20020 -

We often list items like this more for documentation purposes than as an actual sale item. We have no XR7-G pull straps for sale at present, but this photo may be of help to those of you that are looking to restore or recreate a pair.

Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 20608 -

Good clean, unrestored moulding with no dings or obvious scratches removed properly from the backside with a hammer and wooden block.Ford Master Part # C7WY-6551726-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we...

Price: $46.25

Buy Details

Availability: Out of Stock
Item #: 12213 -

This is the gear on the upper side of the gearbox. The cables go over each side of the gear.NOTE: Be sure the gear is in good condition so your cables don't get worn out!

Price: $292.86

Buy Details

Availability: Out of Stock
Item #: 24174 -

1967 - 1969 390-4V engines with 3 or 4 speed manual transmissions. 1969 - 1970 Boss 302 Eliminator 4 speeds. 1970 M-code with 3 or 4 speed manual transmissions. Shaft diameter 3 inches, length 53-1/32" measured on U-joint centers. Used and 'as balanced' from the factory. Ask about slip yokes. Shipping is oversized due to length.

Price: $468.86

Buy Details

Availability: Out of Stock
Item #: 24484 -

1968 - 1970 428CJ Drive shaft - Used All 428CJ's with 4 speed manual transmissions. Shaft diameter 3 inches, length 53 inches measured on U-joint centers. Used and 'as balanced' from the factory. Ask about slip yokes. Shipping is oversized due to length.Ford part # C8WY-4602-A.

Price: $358.88

Buy Details

Availability: Out of Stock
Item #: 24486 -

428CJ engines with C6 automatic transmissions. Shaft diameter 3-1/2 inches. Length 49-41/64 inches, measured on U-joint centers. Used and 'as balanced' from the factory. Ask about slip yokes. Shipping is oversized due to length.

Price: $292.86

Buy Details

Availability: Out of Stock
Item #: 24485 -

390 and 427 engines with C6 automatic transmissions. Shaft diameter 3 inches. Length 49-41/64 inches, measured on U-joint centers. Used and 'as balanced' from the factory.Ford part number C8WY-4602-B Ask about slip yokes. Shipping is oversized due to length.

Price: $523.15

Buy Details

Availability: Out of Stock, Discontinued
Item #: 31355 -

Supplier is not making drive lines at this time, we will update our site when available again. Reproduction one piece drive shaft for the 1967 - 1973 Mercury Cougar. Includes slip yoke and U Joints. Keep in mind that this repro drive shaft will only work on stock configuration cars. If the engine has been swapped, if you've had a different rear end installed etc., these drive shafts will not work. When ordering, be sure to specify (in the notes section) the year of your car, engine size...

Price: $20.05

Buy Details

Availability: Out of Stock
Item #: 11784 -

Reproduction power steering drop bracket for the Mercury Cougar or Ford Mustang. One must use this part when installing headers with power steering.  Because of the way this bracket hangs down, it will get bumped and bumped hard in time. Becasue of this we recommend considerning our premuim version of this bracket, as it is substantially stronger.

Price: $799.88

Buy Details

Availability: Out of Stock
Item #: 13609 -

This kit was sold by Ford Service Departments back in the day for those who were tired of their manual drum brakes. This kit includes all you will need to convert your six cylinder Mustang or V8 Cougar / Mustang from manual to power drum brakes. Technically it is correct only for a 1968 but will work on any year 67-70. The conversion carries a Ford part number of C8ZZ-2A091-A. Ford was generous and gave you both a manual transmission and a automatic transmission brake pedal in the kit. When...

Price: $52.97

Buy Details

Availability: Out of Stock
Item #: 11-0451 -

Used rectangular center duct tube for any 1967-68 Mercury Cougar or Ford Mustang with integral or factory air conditioning. Wire reinforced foam, will show some snags or signs of use. Will not have gaping holes. Was originally stapled to the center housing. Ford part number C7ZZ-19B680-B.

Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 24380 -

Correct cast aluminum elbow fitting for the rear of the C8AZ-9A486-C smog pump. This elbow will have two single mounting holes. The service replacement elbow (Ford part number D4TZ-9C475-A) has two sets of double mounting holes. Correct Ford part number C8AZ-9C475-A.

Price: $51.75

Buy Details

Availability: Out of Stock, On Order
Item #: 41707 -

Concourse Correct 90 degree elbow that attaches to the intake manifold and provides proper clearance for the emission canister and air cleaner housing. Correct for all 1968 S code 390-4V, W code 427-4V and R code 428 Cobra Jet engines.

Price: $139.85

Buy Details

Availability: Out of Stock
Item #: 12933 -

This emblem was used on the driver side of the 1971 - 1972 Cougar hood and on the passenger side of the trunk lid in 1967 - 1968. Also used on various other Mercury products like the Comet, Cyclone, and Marquis prior to 1973. This will not fit on the fender extension of the 1967- 1968 Cougar. Fits many 1967 - 1968 Full size Mercury cars and 1967 - 1969 Mercury trucks. This emblem measures 6 3/8" total width and the "M" is 2 1/8" tall. The bottom mounting studs located on the letter "M" and "Y"...

Price: $139.85

Buy Details

Availability: Out of Stock
Item #: 42356 -

This Mercury script emblem is mounted onto the driver side fender extension. This is an original part still in the Ford box, engineering number on the back of the emblem reads C7WB-16098-A, Ford part number is C7WY-16604-A.

Price: $82.89

Buy Details

Availability: Out of Stock
Item #: 20016 -

This adhesive plaque was placed in front of the shifter on XR7-G models with a factory installed four speed manual transmission. The XR7-G shift knob had a walking Cat on the face of the knob instead of a shift pattern.

Price: $215.87

Buy Details

Availability: Out of Stock
Item #: 24480 -

Rare Cougar only GT emblems. The Mustang GT emblems had different stud locations. These were used on 1968 Mercury Cougar GT models.  This emblem shares the exact same pin locations with the 1968 6.5Litre emblem, so the factory could punch holes and installed the tubular nuts in the fenders of all S and X code Cougars, allowing either emblem to be installed. The 1967 GT emblems have an entirely different stud placement from these 1968 only badges. Letter "G" is Ford part...

Price: $12.47

Buy Details

Availability: Out of Stock
Item #: 21-0122 -

These always are peeling. Located on the right side on the dash face...

Price: $102.87

Buy Details

Availability: Out of Stock
Item #: 20356 -

Regardless of what you have been told these emblems were never chromed. We do not have any of these in stock, probably will not get any more but we post this so as to give you a reference as to what color they should be.

Price: $322.97

Buy Details

Availability: Out of Stock, Discontinued
Item #: 25656 -

Very rare find as the vast majority of these XR7-G steering wheel emblems were gold plated. This is very different from the run of the mill used emblems we have all seen with the brass electro plating worn off. I have owned two XR7-G Cougars with this version of emblem installed and others have reported finding the same version on their original XR7-G's. The burnished version was apparently done first: Ford part number S8WS-3849-A and the much more common gold version done second which carries...

Price: $322.97

Buy Details

Availability: Rare / NOS Part
Item #: 33396 -

Very rare more common version of the XR7-G steering wheel gold plated emblem. This is very different from the run of the mill used emblems we have all seen with the brass electro plating worn off. The burnished version was apparently done first: Ford part number S8WS-3849-A and this much more common gold version done second which carries a Ford / Shelby part number of S8WS-3849-B. To learn more click here  ...

Price: $1,968.89

Buy Details

Availability: Out of Stock
Item #: 30806 -

NOS GT-E Fender badges. Sold as a pair, driver side shows a C7WX-16099 casting number and the passenger side shows a C7WX-16098 number.

Price: $72.85

Buy Details

Availability: Out of Stock
Item #: 32602 -

Reproduction pair of quarter panel scripts with black trim for the 1968 Mercury Cougar. The correct version had no black paint around the letters. This is a one time only limited run of this custom emblem, and when they're gone they're gone! *Only sold as a pair

Price: $115.88

Buy Details

Availability: Out of Stock
Item #: 24257 -

Used emergency / parking brake assembly for a Mercury Cougar or Ford Mustang as removed from a West Coast Cougar organ donor. This unit may have some minor rust. Normally we assemble with reproduction cable.Ford part # C7ZZ-2780-B.

Price: $35.87

Buy Details

Availability: Out of Stock
Item #: 24382 -

Used end cap with the burl woodgrain for the deluxe door pull straps found in the Mercury Cougar XR7 or Ford Mustang. These units will show a degree of pitting, fine scratches and fading. Also, these door pull strap caps are unique to 1968 and they are not currently being reproduced. 1967 has no border and the woodgrain has a different color and look to it. This is for the person that must have correctness in detail or they just need one to finish off their interior. We highly recommend...

Price: $550.89

Buy Details

Availability: Out of Stock
Item #: 32308 -

NOTE: WE SUGGEST LOCAL PICK UP ONLY FOR CORE ENGINE BLOCKS BECAUSE WE CANNOT GUARANTEE BLOCKS WILL NOT HAVE CRACKS INTERNALLY.Used standard bore 4.00" Ford 289 engine block. Will be used, dirty, have measurable taper, and will have a ridge. Good for rebuild. Bare block, may have C6AE, C8AE, castings. When we have them in stock we will post the casting date or dates. Heavy, will require either local pickup or freight shipping.  Dated 6K4 or October 4, 1966.  This item cannot ship...

Price: $650.00

Buy Details

Availability: Out of Stock
Item #: 32307 -

NOTE: WE SUGGEST LOCAL PICK UP ONLY FOR CORE ENGINE BLOCKS BECAUSE WE CANNOT GUARANTEE BLOCKS WILL NOT HAVE CRACKS INTERNALLY.Used standard bore 4.00" Ford 302 engine block. Will be used, dirty, have measurable taper, and will have a ridge. Good for rebuild. Bare block, will have C8OE, casting. When we have them in stock we will post the casting date or dates. Heavy, will require either local pickup or freight shipping.  Dated 7l17 or November 17, 1967. This item cannot ship through any...