Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2017-2064 of 5477
$0 Price: $75.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30816 -

Used Grade A - Hood latch brace, brace only, fits all 1967-68 Mercury Cougars. Straight piece, this is typically the only part of the hood latch assembly that gets damaged in a collision. This is Grade A used, we also have Grade B braces that need some massaging to be perfect.Ford part number C7WY-16747-A.

$0 Price: $42.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30817 -

Used Grade B - Hood latch brace, brace only, fits all 1967-68 Mercury Cougars. Grade B brace that will need some massaging to be perfect. These are fairly easy to get straight enough cosmetically. We also sell complete assemblies and Grade A used braces.Ford part number C7WY-16747-A.

$0 Price: $12.47

Buy Details

Availability: In-Stock Item
Item #: 31960 -

Hood latch striker that screws into the hood on all 1967-68 Mercury Cougars. Ford calls this a Plate - Hood Auxiliary Catch Striker.Fits many other Ford products. You can find the bolts for this item here. Replaces Ford part numbers C5AB-16918 and C4DZ-16918

$0 Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27505 -

Hood latch striker that screws into the hood on all 1967-68 Mercury Cougars. Ford calls this a Plate - Hood Auxiliary Catch Striker.Fits many other Ford products. You can find the bolts for this item here. Replaces Ford part numbers C5AB-16918 and C4DZ-16918

$0 Price: $60.05

Buy Details

Availability: In-Stock Item
Item #: 10514 -

Improved reproduction left hand hood hinge for the Mercury Cougar and Ford Mustang. Very heavy duty compared to the originals, thicker metal and slightly wider hinge bars. These hinges weigh 4.35 lbs, originals weigh 3.2 lbs. Hood hinge rivets have the 'plus' markings like seen on the 1969-70 hinges. Save your hinge springs, these do not come with the new springs. It is easier to fit and adjust these hinges without the spring installed on them. We use an old section of seat belt for removing...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14566 -

If you are not looking to match the part numbers of your original hinges, we recommend considering our PREMIUM quality reproduction that is made of thicker material than the originals for added durability and is far superior to any previous reproduction. This listing is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set.   We carefully inspect these hinges before sending them...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14568 -

This is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set. We now offer a PREMIUM quality reproduction that is superior to any other reproduction. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. Here is a helpful youtube video that shows you how to adjust your hood. Shipped with the spring. These will also work on 1967-70 as well....

$0 Price: $60.05

Buy Details

Availability: In-Stock Item
Item #: 10513 -

Improved reproduction right hand hood hinge for the Mercury Cougar and Ford Mustang. Very heavy duty compared to the originals, thicker metal and slightly wider hinge bars. These hinges weigh 4.35 lbs, originals weigh 3.2 lbs. Hood hinge rivets have the 'plus' markings like seen on the 1969-70 hinges. Save your hinge springs, these do not come with the new springs. It is easier to fit an adjust these hinges without the springs installed on them. We use an old section of seat belt for removing...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14567 -

If you are not looking to match the part numbers of your original hinges, we recommend considering our PREMIUM quality reproduction that is made of thicker material than the originals for added durability and is far superior to any previous reproduction. This listing is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set.   We carefully inspect these hinges before sending them...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14569 -

This is for you folks out there who want the correct part number on your hinge. Good used OEM original hood hinges that are available individually or as a set. We now offer a PREMIUM quality reproduction that is superior to any other reproduction. We carefully inspect these hinges before sending them as used hinges are prone to wear in more than one area. Here is a helpful youtube video that shows you how to adjust your hood. Shipped with the spring. These will also work on 1967-70 as well....

$0 Price: $101.55

Buy Details

Availability: In-Stock Item
Item #: 11092 -

Improved reproduction right and left hand hood hinges for the Mercury Cougar and Ford Mustang. Much heavier duty compared to the originals, thicker metal and slightly wider hinge bars. These hinges weigh 4.35 lbs, originals weigh 3.2 lbs. Hood hinge rivets have the 'plus' markings like seen on the 1969-70 hinges. Save your hinge springs, these do not come with the new springs. it will be easier to fit and adjust these hinges prior to installing the springs on them. We use an old section of...

$0 Price: $176.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19073 -

Good used, rust free latch that is in good working order. This unit has not been straightened or pushed out after being in a fender bender. We also have many grade "B" latches in less than perfect condition. We also have the individual components listed. Check out this video ...

$0 Price: $118.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30814 -

Used, hood latch assembly that is in good working order. This unit will have a bit of metal shifting on the brace portion. Can be straightened fairly easily We also have many grade "A" latches. We also have the individual components listed. Check out this video ...

$0 Price: $2.45

Buy Details

Availability: In-Stock Item
Item #: 41294 -

For use with hood dowel or latch part number C5ZZ-16929-A. Application 1967-68 Mercury Cougar, 1965-66 Ford Mustang, 1965 Falcon and Comet. Original Ford part numbers 33845-S8 & 351810-S8.

$0 Price: $96.25

Buy Details

Availability: In-Stock Item
Item #: 14062 -

A modern touch to this classic muscle car look. This kit is the same Scott Drake "Shelby Style" Billet hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, machined billet aluminum top plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between this version and the deluxe version, is that these are Machined billet aluminum top plates and the deluxe is stainless steel. Common...

$0 Price: $63.35

Buy Details

Availability: In-Stock Item
Item #: 13779 -

This kit is the same Scott Drake "Shelby Style" DELUXE hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between the standard version and this deluxe version, is that the standard is chrome plated and the deluxe is stainless steel. Common consensus is that the holes for the pins were hand drilled at the factory, so the...

$22.95 Price: $33.17

Buy Details

Availability: In-Stock Item
Item #: 42020 -

This kit is the same Scott Drake "Shelby Style" hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between this version and the deluxe version, is that these are chrome plated and the deluxe is stainless steel. Common consensus is that the holes for the pins were hand drilled at the factory, so the exact location varied from...

$0 Price: $75.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30815 -

Used hood release latch by itself, this is a component of the hood latch assembly for any 1967-68 Mercury Cougar.

$164.00 Price: $246.75

Buy Details

Availability: In-Stock Item
Item #: 26039 -

Reproduction Non-Functional hood scoop that was originally used on the 427 GT-E, but will work on any 1967-68 Mercury Cougar and look great! This scoop measures 25 3/8" at its widest point, 26-1/2" at its longest point, and is 2" high. Originally, the recessed scoops in the front were painted black to give the illusion of an open scoop. The original blue prints show the center of the rear stud as being 2 1/8 inches forward of the back edge of the hood. Measuring the distance on original XR7-G...

$170.00 Price: $286.75

Buy Details

Availability: In-Stock Item
Item #: 53224 -

Non functional scoop originally used on the 1968 Mercury Cougar XR7-G but will work on any 67 - 68 Mercury Cougar. This scoop measures 25 3/8" at its widest point, 26 1/2" at its longest point and is 2" high. The original blue prints show the center of the rear stud as being 2 1/8 inches forward of the back edge of the hood. Measuring the distance on original XR7-G and GT-E's most measure about 1 1/2" from the rear edge of the hood to the rear edge of the scoop at centerline. This differs from...

$0 Price: $25.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32039 -

Welded in hooked retainer for the rear seat back installation on any 1967-73 Mercury Cougar or Ford Mustang coupe or hard top body style. This bracket welds to the edge of the package tray. Two hooks per car, sold individually. We cut out a individual sections as shown. Make good measurements prior to removal of your old brackets. You will need to drill out the spot welds prior to installation. For sure that basic Ford part number is 62118.

$0 Price: $70.90

Buy Details

Availability: In-Stock Item
Item #: 23440 -

The High tone is indicated in raised letters located on the perimeter of the horn. The 1971-73 almost uses the same horn and bracket as the 1967-68, but was mounted at a different angle, so if you have a 1971-73 you will need to loosen the screw that holds the horn to the bracket and rotate the horn to the correct position.  These horns are close but not actually correct for a Cougar. 1967-68 Cougars used part number C7WF-13802-B Lo / C7WF-13801-B Hi and 1971-73 used D0DF-13802-A Lo /...

$35.00 Price: $35.95

Buy Details

Availability: In-Stock Item
Item #: 13848 -

The High tone is indicated in raised letters located on the perimeter of the horn. The 1971-73 almost uses the same horn and bracket as the 1967-68, but was mounted at a different angle, so if you have a 1971-73 you will need to loosen the screw that holds the horn to the bracket and rotate the horn to the correct position. We do offer the correct used Cougar horns.Replaces Ford Part # C7ZZ-13832. These horns are close but not correct for a Cougar. 1967-68 Cougars used part number C7WF-13802-B...

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27368 -

Tested and working used Hi tone horn. The High tone is indicated in raised letters located on the perimeter of the horn. 1967-68 Cougars used part number C7WF-13801-B Hi tone. Every horn is bench tested and inspected for cosmetic defects, if they do not function properly, and pass a visual inspection, they get recycled. The used horns at WCCC can be used as-is or you can clean and detail them for you show car.NOTE* - High tone horn is on the passenger side ...

$35.00 Price: $35.95

Buy Details

Availability: In-Stock Item
Item #: 13852 -

The High tone is indicated in raised letters located on the perimeter of the horn. The 1971-73 almost uses the same horn and bracket as the 1967-68, but was mounted at a different angle, so if you have a 1971-73 you will need to loosen the screw that holds the horn to the bracket and rotate the horn to the correct position. Replaces Ford Part # C7ZZ-13832. These horns are close but not correct for a Cougar. 1967-68 Cougars used part number C7WF-13802-B Lo / C7WF-13801-B Hi and 1971-73 used...

$0 Price: $3.25

Buy Details

Availability: In-Stock Item
Item #: 41435 -

Used on two spoke steering wheels. Replaces Ford Part # C0DZ-13807-A. Although it does not "look" right it will function correctly. Those in the know will purchase our good used spring.

$0 Price: $33.17

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19285 -

Decent used horn ring but unlike our grade "A" used horn ring this one will have very minor pitting but no open blisters in finish. Good value for your driver quality 68-69 Ford / Mercury with two spoke steering wheel.

$0 Price: $78.25

Buy Details

Availability: In-Stock Item
Item #: 15309 -

Reproduction Two Spoke Steering Wheel Horn Ring for the 1968 and 1969 Mercury Cougar. This is a very good reproduction piece. The original horn contact pieces fit nicely. This casting, while different than the 1968 version with the empty cavities is actually stronger. *NOTE* Save your old horn ring, you will need to transfer the rubber spacer and the horn contacts to this reproduction part.*CUSTOMER REVIEW* Called WCCC the other day after calling around to a lot of garages and auto parts...

$0 Price: $25.15

Buy Details

Availability: Out of Stock
Item #: 13627 -

Reproduction Autolite gas tank to filler pipe hose fits the 67 to 70 Mercury Cougar, measures 4 1/2" long. Excludes 1970 with California emissions. Even if yours is not cracked it will be hard if it is over two decades old. We highly suggest you replace this part if yours is in fact hardened with age because a minor rear end collision could cause it to fail and send fuel spilling into your trunk area. Replaces Ford part #: C8ZA-9047-A. ...

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26659 -

This Gas Tank To Filler Pipe Hose reproduction fits the 67, 68, 69, and 70 Mercury Cougar. Excludes 1970 with California emissions. Even if yours is not cracked it will be hard if it is over two decades old. We highly suggest you replace this part if yours is in fact hardened with age because a minor rear end collision could cause it to fail and send fuel spilling into your trunk area. Replaces Ford part #: C8ZA-9047-A.

$0 Price: $40.91

Buy Details

Availability: In-Stock Item
Item #: 41779 -

Both ends have 90 degree molded ends. Attaches heater core to water heater control valve.Replaces Ford Part #: C7ZZ-18472-CVAC.

$52.16 Price: $94.85

Buy Details

Availability: In-Stock Item
Item #: 13721 -

High pressure hose from the insulator to the control valve. All correct ribbing, striping, and crimping. Has correct colored protective sheathing.  This hose is factory correct for the 1967-68 390, 427 and 428 & 1969-70 302, 351, 390 and 428. This hose can also be used to reroute the 1967-68 289 and 302 to the big block routing when paired with the other 3 hoses needed (C9OZ-3A319-A, C8ZZ-3A713-A, C7AZ-3A005-A) and the 69-70 power steering hose bracket (C7ZZ-3C510-A and...

$0 Price: $45.80

Buy Details

Availability: In-Stock Item
Item #: 53273 -

NOTE: Some customers have mentioned this hose does not fit well, others have said it fits with no issues. It is not the same as OEM and fitment seems to depend on the vehicle and modifications that have been previously done. We recommend going with our premium version. Lower pressure hose for any 1967-70 Mercury Cougar and Ford Mustang, but with a V-8. The factory power steering pressure hose originally was a two piece hose. Valve end has the 5/16" flared male fitting, and a 3/8" female...

$50.00 Price: $57.47

Buy Details

Availability: In-Stock Item
Item #: 42029 -

This Pump to Value Outlet Pressure Hose is 100% correct for the 1967, 1968, 1969, 1970 big block. This hose has industrial high pressure fittings that are much higher quality than those available by most Mustang / Cougar Parts Dealers. Replaces Ford Part #: C9OZ-3A319-C. Click this link for more clarity on power steering hoses: https://secure.cougarpartscata... ...

$0 Price: $22.75

Buy Details

Availability: In-Stock Item
Item #: 31588 -

Reproduction hose that connects the oil cap to the air cleaner on cars equipped with the 289 engine. Replaces Ford Part number C6AZ-6A664-P