Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2113-2160 of 5477
$0 Price: $209.88

Buy Details

Availability: Out of Stock
Item #: 30595 -

One year only, very hard to find in used condition with brilliant red, most have faded to pink or gray. Used on standard Cougar only. Ford part # C8WY-1130-BFits:1968 Mercury Cougar

$0 Price: $110.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30264 -

Used grade "A" turbine style hubcap / wheel cover for the Mercury Cougar and Montego. Will have no obvious curb rash, the center will still show some red but usually will be faded and the paint will show some aging. These are the same as the 1969 Sports Special / 1968 Dan Gurney hubcap / wheel cover, but have the Mercury logo glued in the center. Ford part # C8GY-1130-G.Fits:1968 Mercury Montego

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24385 -

Used grade B turbine style hubcap / wheel cover for the Mercury Cougar and Montego. Will have some curb rash, faded center, minor dings and paint deterioration. These are the same as the 1969 Sports Special / 1968 Dan Gurney hubcap / wheel cover, but have the Mercury logo glued in the center. Ford part # C8GY-1130-G.Fits:1968 Mercury Montego

$0 Price: $116.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30113 -

Used simulated wire spoke hubcap / wheel cover that is in above average condition with no curb scrapes. This listing is for someone who has removed their center from their current damaged cap and wants to save money by purchasing a cap with no center. The same cap was used on most all FoMoCo products including, but not limited to the Falcon, Mustang, Fairlane, Comet, Galaxie, Montego and LTD. Only the center logo changed from one car to the next. Ford part # C7WY-1130-C. ...

$0 Price: $58.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22627 -

Used simulated wire spoke hubcap / wheel cover that is in average condition with minor curb scrapes. This listing is for someone who has removed their center from their current damaged cap and wants to save money by purchasing a cap with no center. The same cap was used on most all FoMoCo products including, but not limited to the Falcon, Mustang, Failane, Comet, Galaxie, Montego and LTD. Only the center logo changed from one car to the next. Ford part # C7WY-1130-C. ...

$0 Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 31641 -

The POGO Stick works just like the larger Hustler stick but is much easier to ship. If you need more leverage you can just add a pipe for leverage. We will loan this hustler stick for 60 days, with a 100% refundable purchase price. Tool must be returned in undamaged condition with no missing parts within the 60 day time period. Returns past 60 days are subject to a 25% restocking fee. Check out this video ...

$0 Price: $68.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33481 -

C7OZ-3A697-A The most common power steering pump reservoir. Originally found on pumps with tag numbers: HBA-BF, HBA-BF1, and HBA-BR. These apply to 1967-69 Cougar and Mustang with power steering pumps originally installed on 289/302/390/427 and all 1968-1970 428CJ engines. Low pressure line nearly straight. *Note - Excludes 1969 302 & 351 engines. Our Grade A cans are far and few between as often folks like to use a pry bar as leverage to over tighten their belt. These cans will usually have...

$0 Price: $34.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24067 -

C7OZ-3A697-A The most common power steering pump reservoir. Originally found on pumps with tag numbers: HBA-BF, HBA-BF1, and HBA-BR. These apply to 1967-69 Cougar and Mustang with power steering pumps originally installed on 289/302/390/427 and all 1968-1970 428CJ engines. Low pressure line nearly straight. *Note - Excludes 1969 302 & 351 engines. Our Grade B cans will always have some minor to moderate damage that is cosmetic. If you are capable of doing some minor body work they can made to...

$0 Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33480 -

Grade A Generic Ford power steering pump reservoir, has low pressure or return fitting point up. Check for hose clearance with your exhaust manifolds or headers on this reservoir. Fits 1967-69, and 1971-73 pumps with the small center hole for the pressure line. Most factory Ford pumps in 1970, had a larger hole, that was offset from center. Originally, these likely came from a full sized Ford car or pickup. Very common to find this style of reservoir on replacement power steering pumps. Our...

$0 Price: $24.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20669 -

Grade B Generic Ford power steering pump reservoir, has low pressure or return fitting point up. Check for hose clearance with your exhaust manifolds or headers on this reservoir. Fits 1967-69, and 1971-73 pumps with the small center hole for the pressure line. Most factory Ford pumps in 1970, had a larger hole, that was offset from center. Originally, these likely came from a full sized Ford car or pickup. Very common to find this style of reservoir on replacement power steering pumps....

$0 Price: $17.87

Buy Details

Availability: Out of Stock
Item #: 25658 -

Tag marked HBA-BF or HBA-BF1 for use on 1967-68 Cougar and Mustang with power steering pumps originally installed on 289/302/390/427 and all 1968 428CJ engines. Various dates, and could be designated for either a Ford-Thompson (F) or TRW (W) power steering pump. For 1969 dated tags please see the related listing.*Please Note - Current inventory is exclusively 1967-68.

$0 Price: $10.85

Buy Details

Availability: In-Stock Item
Item #: 33004 -

Reproduction idle mixture screw caps for Holley 4150 carburetors as found on 1967-70 Mercury Cougar and Ford Mustang. All white plastic caps. These were the tamper proof type of caps as installed from the factory.

$0 Price: $74.55

Buy Details

Availability: In-Stock Item
Item #: 26726 -

Import reproduction. Fits 1967-70 Mercury Cougar or Ford Mustang without power steering. Rarely do these last the life of the rest of the front suspension, if you get 40,000 miles out of one you are lucky. The slightest amount of play in this component will translate to major slop in the steering. Click on images to enlarge. ...

$0 Price: $132.15

Buy Details

Availability: In-Stock Item
Item #: 26694 -

Quality reproduction. Fits all 1967-70 Mercury Cougar and Ford Mustang. Rarely do these last the life of the rest of the front suspension, if you get 60,000 miles out of one you are lucky. The slightest amount of play in this component will translate to major slop in the steering. Lin, Hey, just wanted to thank you for your prompt service. Last Friday 4/24/09 I ordered a 71 - 73 Idler Arm and today (Monday 4/27/2009) I received it. WOW!!! I just wanted to let you know that you guys are...

$0 Price: $58.18

Buy Details

Availability: In-Stock Item
Item #: 26722 -

NOTE - Some customer are experiencing problems with this economy idler arm, the castle nut on top is causing clearance issues with the bolt on the top arm.Import reproduction. Fits 1967-70 Mercury Cougar and Ford Mustang. Rarely do these last the life of the rest of the front suspension, if you get 40,000 miles out of one you are lucky. The slightest amount of play in this component will translate to major slop in the steering.

$0 Price: $99.55

Buy Details

Availability: In-Stock Item
Item #: 26715 -

Premium grade of idler arm. Fits all 1967-70 Mercury Cougar and Ford Mustang. If you have loose / sloppy steering, replacing this part could help tighten things up. Rarely do these last the life of the rest of the front suspension, if you get 60,000 miles out of one you are lucky. The slightest amount of play in this component will translate to major slop in the steering. Drag link hole size: 5/8" Customer feedback: Hey, just wanted to thank you for your prompt service. Last Friday...

$0 Price: $219.85

Buy Details

Availability: In-Stock Item
Item #: 11-9901 -

Air conditioning belt tension pulley. For Cougars and Mustangs with the 289 or 302 engine built between 1/3/1967 and 3/1/1968. These are all sold with new bearings. If your pulley only needs a bearing, don't sweat it. Click this BEARING link, we've got what you need! Ford part # C7AZ-8678-B. *NOTE* Must be used with the C7AA-2888-G cast iron lateral support brace. ...

$0 Price: $145.89

Buy Details

Availability: In-Stock Item
Item #: 11-9909 -

Used A/C belt tensioning pulley with new bearing. Ford standardized some of the brackets starting in 1968. This adjustable bracket and pulley was used on all 1968-69 390 / 428CJ engines and 1968 289 and 302 engines after 3/1/1968. Additionally it was on 1969 351W engines as well. This adjustable tensioner pulley is identified by having the small bearing pulley. Same as the DOAZ-8678-C adjustable idler pulley only with a big bearing pulley. *Note* All new bearings will have a slight bit of play...

$0 Price: $95.85

Buy Details

Availability: In-Stock Item
Item #: 11-9910 -

Service replacement A/C belt tensioning pulley with new installed bearing. This adjustable bracket and pulley can be used on all 1968 - 1973 Cougars or Mustangs with the V-8 engine as long as they have the "stamped steel" lateral air compressor support brackets. This bracket will only have the big bearing pulley and may have various casting numbers such as D5TA-8A617, D3OA-8A617, D5OA-8A617, D8OA-8A617, etc.*Note* All new bearings will have a slight bit of play in them. This is by design, by...

$0 Price: $8.85

Buy Details

Availability: In-Stock Item
Item #: 10462 -

New sealed bearing for installing on your 1968-73 Mercury Cougar or Ford Mustang idler / tensioner pulley. This bearing also came in all of the "service replacement" idler pulley assemblies and is physically larger than the idler bearing for the 1968-69 only idler pulley (68-69 bearing sku: 10827). The center portion of the pulley, where this bearing would press into, has an inside diameter measurement of 1 9/16". On the smaller bearing pulley, this measurement is 1 3/8". Both versions of this...

$0 Price: $8.85

Buy Details

Availability: In-Stock Item
Item #: 10827 -

New sealed bearing for installing on your 1968-69 Mercury Cougar or Ford Mustang idler / tensioner pulley. This bearing is physically smaller than the bearing used on the 1968-73 idler pulley (1968-73 bearing sku: 10462). The 1968-73 idler pulley assembly came as a "service replacement" on 1968-69 cars. The center portion of the pulley, where this bearing would press into, has an inside diameter measurement of 1 3/8". On the larger bearing pulley, this measurement is 1 9/16". Both versions of...

$0 Price: $174.85

Buy Details

Availability: In-Stock Item
Item #: 11-9902 -

Used bracket and pulley assembly for Cougars and Mustangs with the 289 or 302 engine built after 3/1/1968. All pulleys are sold with new bearings installed.  If your pulley only needs a bearing, don't sweat it. Click this BEARING link, we've got what you need! We also offer a bearing replacement service to rebuild your 289 or 302 fixed idler pulley, see item 27539. Replaces part # C7AZ-8678-C. ...

$0 Price: $152.85

Buy Details

Availability: In-Stock Item
Item #: 11-9905 -

Used bracket and pulley assembly with new installed bearing for Cougars or Mustangs equipped with the 289, 302, or 1969 351W engine. We also offer a bearing replacement service to rebuild your 289, 302, or 1969 351W fixed idler pulley, see item 27539.*Note* All new bearings will have a slight bit of play in them. This is by design, by the manufactures. We have asked the suppliers, and the answer is to allow for possible heat expansion. Even the "Koyo" branded ones, which were used starting in...

$0 Price: $203.85

Buy Details

Availability: In-Stock Item
Item #: 11-9904 -

Used fixed idler bracket and pulley assembly with new installed bearing for 1968-69 Cougars and Mustangs with the 390 or 428CJ engine. This part will have a small bearing on the pulley and is not marked with a casting number. The 1970 bracket and pulley assembly was a service replacement part and are the same as the 68-69 with the exception of a slightly larger bearing. This later service replacement part is an economically priced service replacement for the earlier originals. All pulleys come...

$0 Price: $40.65

Buy Details

Availability: In-Stock Item
Item #: 11083 -

Nice lower quality ignition coil for those of you on a tighter budget. A wee bit cheaper than the other performance coils we offer like the Yellow Top Coil or the Pertronix Flamethrower series coils, but still a great buy and very reliable.   

$0 Price: $47.35

Buy Details

Availability: In-Stock Item
Item #: 15284 -

These replacement "Yellowtop" ignition coils are copies of the original. Nice reproduction cosmetically and functionally. This is a very prominent piece and a must have when trying to detail your engine compartment properly. Replaces Ford part # B6A-12029-B.   Note, no decals are included. Check the website in related items.

$0 Price: $62.85

Buy Details

Availability: Out of Stock
Item #: 32773 -

NOS new old stock ignition lock cylinder for any 1967-69 Mercury Cougar or Ford Mustang.  Ford Motorcraft part # C9AZ-11582-A Here is a helpful "How To" youtube video on how to replace your ignition switch.

$0 Price: $7.07

Buy Details

Availability: In-Stock Item
Item #: 15290 -

Made by the original supplier! Replaces Ford part # C9AZ-11582-A Here is a helpful "How To" youtube video on how to replace your ignition switch.

$0 Price: $19.98

Buy Details

Availability: In-Stock Item
Item #: 33758 -

Finally a fast easy way to hook up the Pertronix Ignitor©! The Ignition Power Relay installs next to the starter solenoid with a supplied self-drilling, self tapping screw. Each wire is the right length and comes with the correctly sized terminal already Installed. Simply connect two wires at the solenoid and connect the Ignitor to the red power wire. The Pertronix Ignitor© is a 12 volt device that must be powered during crank and run. Many installers mistake the coil positive for a 12 volt...

$0 Price: $52.16

Buy Details

Availability: Out of Stock
Item #: 20549 -

Here is a helpful "How To" youtube video on how to replace your ignition switch.

$0 Price: $54.77

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32751 -

Used ignition switch for the 68 - 69 Cougar or Mustang. Does not include cylinder or keys.Here is a helpful "How To" youtube video on how to replace your ignition switch.

$0 Price: $38.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24432 -

C8OZ-3C511-C Rear power steering pump support bracket. Also called the high pressure hose indexing bracket. For any 1968 Cougar or Mustang with 289 or 302 engines. OEM used part designed to maintain the position of the high pressure power steering hose from coming in contact with with moving or high heat parts. *Note - May or may not work with non-original or replacement high pressure hoses.

$0 Price: $17.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0049 -

Used metal indicator lens bezel for the Mercury Cougar. This is for late 1967 through 1968 which uses the small housing. The early 1967 lens was taped to the back of the dash pad. Be aware that there are 2 sizes. This bezel is for the brake, belt and turn indicators. It also is for the high beam on the 1967 which used the small indicator. On the 1968 Cougars, they had the large high beam indicator.

$0 Price: $95.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33664 -

Used compressed gas cylinder for a 1967-1973 Mercury Cougar or Ford Mustang. Later design canister is about 2-7/8" inches in diameter, slightly larger than the OEM 1968-70 version. These will be mostly empty and for display only. OEM cylinders are approximately 2-13/16" thick. These cylinders are very close to propane or Map gas cylinders in construction. Paint one red, and slap a cardboard sleeve with a reproduction decal and close the trunk lid. Dust cap may or may not be included,...

$0 Price: $171.00

Buy Details

Availability: In-Stock Item
Item #: 42397 -

Full driver (left hand) side front frame rail measures 52" long and the outer rail has weld nuts installed for proper installation. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

$0 Price: $129.87

Buy Details

Availability: Out of Stock
Item #: 42398 -

Full passenger (right hand) side front frame rail that measures 52" long and the outer rail has weld nuts installed for proper installation. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

$0 Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 41627 -

Reproduction passenger side front fender apron that has the shelf for installing the battery tray. *Restoration Hint* This section of metal was VIN stamped, consider welding in the stamped VIN section to keep your car whole.Here's a little film to help you fortify your flexxy feline!

$0 Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 10932 -

New inner floor frame support for the Mercury Cougar and Ford Mustang.

$0 Price: $140.04

Buy Details

Availability: In-Stock Item
Item #: 42390 -

Full driver (left hand) side front frame rail that measures 52" long. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

$0 Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30677 -

Guide that measures 10 5/8" long held in place by the outer trim that has four screws. Driver and Passenger are interchangeable.

$0 Price: $287.95

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 32001 -

This latest of a series of 67 - 68 reproduction sheet metal parts is just what the market has been waiting for! This listing is for the framework of the hood. This frame is for someone who needs to replace the rotted out bits of your hood frame, or for someone who simply wants a base to make a fiberglass hood on their own.  These hood frames are oversized and cannot ship through UPS or USPS, so it will need to ship via truck freight. You can expect to pay somewhere between $200-300...

$0 Price: $118.25

Buy Details

Availability: In-Stock Item
Item #: 31606 -

Quality inner wheel house made by Dynacorn patterned off of Grade A used panels provided by West Coast Classic Cougar.We also sell these as a complete set of four, which will save you money on shipping as we unbox them and nest all four together and fit them in one box.

$0 Price: $118.25

Buy Details

Availability: In-Stock Item
Item #: 31607 -

Quality inner wheel house made by Dynacorn patterned off of Grade A used panels provided by West Coast Classic Cougar.We also sell these as a complete set of four, which will save you money on shipping as we unbox them and nest all four together and fit them in one box. ...

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-1023 -

This set of three woodgrain dash inserts for the Mercury Cougar without A/C are not as good as our grade "B" units. However, it will work for your lower quality daily driver. These retain an original looking finish and we carefully match these under bright lights to ensure they match color wise. This dash insert will have scratches, dings, or other blemishes, and all four toggle switch labels will be in place. Click here for the A/C version. (A/C version has the rectangular cutout in the...

$0 Price: $529.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0028 -

This used set of three XR7 woodgrain dash inserts for the Mercury Cougar without A/C are the best of the best of which we can provide you with. These grade "A" inserts retain a rich, original looking finish and have not been subjected to prolonged damaging UV rays. We carefully match these under bright lights to ensure they match color wise. There may be light surface scratches, no dings or other blemishes, and all four toggle switch labels will be in place. Includes a brand new, correct XR-7...