Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3697-3744 of 5477
$0 Price: $90.95

Buy Details

Availability: In-Stock Item
Item #: 11391 -

Dimensionally correct reproduction that will allow you to use an original XR7-G remote mirror or the manual mirror found on the Hurst Oldsmobile or AMC Rambler Scrambler. Do you have riv-nut questions? Here are riv-nut answers!

$0 Price: $491.27

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11389 -

This driver side (left hand) remote mirror was used only on the 1968 XR7-G Cougar and is a direct bolt on for any 1967-68 Cougar and uses the same mirror base gasket. It comes ready to install with the exception of correct adapter base that we sell separate. The casting and chrome are good quality here, the only thing we find issue with is the quality of the mirror lens and the fact that the lens is rather loose in its setting. It does hold its position well as you drive down the road. Do you...

$0 Price: $1,074.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20015 -

Good used external XR7-G driver side (left hand) rear view mirror with its adapter base, lens, and cables all in good used condition.  Do you have riv-nut questions? Here are riv-nut answers!

$0 Price: $3.87

Buy Details

Availability: In-Stock Item
Item #: 26213 -

This kit is similar to the original type mounted in every drivers side door. These OEM style Riv-Nuts will be a challenge to install unless you have the special tool. Almost every body shop will have this rivet gun type of tool but here are a couple of ways to tackle the installation without the correct tool. Hole size is 1/4". Replaces Ford Part #: C7AZ-17696. Check out this video Still have riv-nut questions? Here are riv-nut answers! ...

$0 Price: $1.92

Buy Details

Availability: In-Stock Item
Item #: 42027 -

If your are missing your factory Riv-Nuts, or you are installing a passenger side mirror, these are a very easy to use alternative to the metal riv-nuts we offer. Another good application for these is when your existing mirror mounting holes are "hogged out" these slightly over sized inserts are just the ticket. Keep in mind our kit is not only less money than others you may find but the screws are stainless steel. Hole size for these rubber inserts is 3/8". Keep in mind the upper lip stands a...

$37.00 Price: $81.55

Buy Details

Availability: In-Stock Item
Item #: 14328 -

Quick disconnect that installs between the sight glass hose and the sight glass to A/C dryer hose. This unit also includes 2 O-rings (Part # L33,D2AZ-19D695-R or YF-368 and Part # H33, D2AZ-19D695-AE or YF-316)Quick Connect (Part # QF3,C1SZ-19B696-A or YF-241 and Part # QM6, C1SZ-19B695-A or YF-252).

$0 Price: $7.45

Buy Details

Availability: In-Stock Item
Item #: 14-0019 -

New spray silicone lubricant for the squeaky Mercury or Ford. This spray lubricant is great for door hinges, trunk hinges, hood hinges and basically anything else that needs to be lubricated. Easy to use and will definitely de-squeak your vehicle.

MSRP:$3.99
$3.99 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 32395 -

New slotted pan head screw for mounting distributor points or condensers. Three total, per single advance Ford distributors. We know that these fit FoMoCo, Autolite and Motorcraft marked distributors 1967-73. These are AMK screws 8-32x9/32". Sold individually, but you likely need 3. 

$0 Price: $1.05

Buy Details

Availability: In-Stock Item
Item #: 32396 -

New phosphate dipped slotted pan head screw for mounting distributor vacuum advances. Two total, per Ford distributor. We know that these fit FoMoCo, Autolite and Motorcraft marked distributors 1967-73. These are AMK screws 8-32x1". Sold individually, you will need 2. 

$0 Price: $6.15

Buy Details

Availability: In-Stock Item
Item #: 41017 -

Reproduction Small Block Intake Manifold Bolt for the 1968 -1969 Mercury Cougar - 1968 -1969 Ford MustangSold individually 

$0 Price: $241.67

Buy Details

Availability: Out of Stock
Item #: 30896 -

Thermactor smog hose installation clamps. Fits all Ford and Mercury 1968 S code 390-4V or W code 427-4V engines sold in the US. Additionally fits 1968-70 428 Cobra Jet and Super Cobra Jet engines. Set of clamps, several bolts and spacer as shown. Include bolts for pump pulley, top bolt on pump for adjusting bracket, and pivot bolt and spacer for pump.

$0 Price: $2.05

Buy Details

Availability: In-Stock Item
Item #: 41016 -

Reproduction Smog Pump Pully Bolt for the 1967 - 1968 Mercury Cougar or Ford MustangSold individually 

$0 Price: $22.91

Buy Details

Availability: In-Stock Item
Item #: 27410 -

Reproduction hardware kit for installing the smog pump on cars with 390 / 427 / 428CJ engines from 1968-70. Including Cougar, Mustang, Torino, Ranchero, Cyclone, etc. Includes spacer, pivot bolt and washer, adjusting bracket bolts.

$0 Price: $358.33

Buy Details

Availability: In-Stock Item
Item #: 30670 -

Set of thermactor smog tubes on any 1968 390GT, 1968 GT-E 427-4V, or 1968-70 428 Cobra Jet engines. Mercury Cougar and Ford Mustang, Torino, Cyclone, Ranchero, etc. These will work with original 390 or 428CJ cylinder heads drilled for air injection smog system from factory. Fits most FE engine applications that used the air pump smog system in 1968 with manual transmission. We also have the ferrules / nuts and other hardware.

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30173 -

Used snap in socket / pigtail for the clock light on your 67 - 68 Cougar. Also fits many other applications.

$0 Price: $2.88

Buy Details

Availability: In-Stock Item
Item #: 15-0178 -

Used snap ring that is used to hold the bearing on you the steering shaft. This ring was used on 67 - 78 fixed columns and 70 - 78 tilt columns. Not for use on 67 - 69 tilt columns.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

$0 Price: $1,213.94

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33730 -

This is the base model Sniper II kit, does not include Power Distribution module or any other options.  The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is...

$0 Price: $1,569.95

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33548 -

The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple...

$0 Price: $165.85

Buy Details

Availability: Rare / NOS Part
Item #: 33113 -

This air cleaner is the late style without the vacuum actuated valve. Mid year it was changed to a thermal activated valve. After 4/2/1968. 289-2V , 302-2V, and 302-4V engines after 4/2/1968. Ford part number C8AZ-9A626-D. NOS new old stock. ...

$0 Price: $85.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24378 -

This air cleaner is the late style without the vacuum actuated valve. Mid year it was changed to a thermal activated valve. After 4/2/1968. 289-2V , 302-2V, and 302-4V engines after 4/2/1968. Ford part number C8AZ-9A626-D. Click on images to enlarge. ...

$0 Price: $80.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15159 -

This air cleaner is the early style with a vacuum actuated valve. 289-2V , 302-2V, and 302-4V engines prior to 4/2/1968. Ford part number C8AZ-9A626-A.

$0 Price: $539.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32713 -

This snorkel was found on the 1968 Mercury Cougar and XR7-G models with the 390 or 428 engine and the tall pent roof finned aluminum valve covers. The HERTZ model with the 390 engine used a chrome "Powered By Ford" chrome valve cover and did not need the extra length in the extension. NOS XR7-G Air Cleaner Snorkel for the 1968 Mercury Cougar Equipped with the 390 or 428 Engine and cast aluminum running cat valve covers. Ford part # C8WY-9A626-B. ...

$0 Price: $346.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11882 -

Quality recreation made from original parts. Decent reproduction, slightly different than the original Ford version. The noticeable difference is the lack of square notch in the slop joint. Ford part of C8OZ-9A626-C. This snorkel comes to you in primer.

$0 Price: $66.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15134 -

Air cleaner intake assembly or snorkel specific to the one year only 390-2V premium fuel engine, (X code engine). This version has the thermally operated trap door. There was an early version that used vacuum to open the trap door to the heat stove. Ford part number C8WY-9A626-A. *Note - This snorkel has a different spacing on the mounting ears, it will not mount to a 390GT air cleaner base.

$0 Price: $75.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32840 -

Air cleaner intake assembly or snorkel specific to the one year only 390-2V premium fuel engine, (X code engine). This version has the vacuum operated trap door. There was an more common thermal version that used temperature to open the trap door to the heat stove. In most cases the vacuum valve will not be working. Most people are probably better off with the thermal version. We do not know the change over date. Ford part number C8WY-9A626-A. *Note - This snorkel has a different spacing...

$0 Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 14078 -

For use with factory and reproduction console parts on a 1968 Mercury Cougar or Ford Mustang. Plugs into your existing console wiring harness. Double male plug is 1968 only. Sold without light bulb. The supplier says this replaces Ford part number C7ZZ-15A808-B but that is incorrect as the Ford part number for 68 is C8ZZ-15A808-B. To use this on a 67 the plug would have to be changed to a male / female combo plug.

$0 Price: $40.95

Buy Details

Availability: In-Stock Item
Item #: 32108 -

Reproduction shift indicator light for use on the 68 Cougar and Mustang without a center console. Plugs into your existing console wiring harness. Double male plug is 1968 only. 

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27281 -

Bulb and socket assembly that attaches to the back side of your instrument cluster housing on all 1968 Standard model Cougars. All electrical harnesses are inspected, professionally repaired (when needed), tested, and ready to install. Harness marked C8WB-10B942-E.Check out the video below on our new gauge tester: ...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27280 -

Bulb and socket assembly that attaches to the back side of your instrument cluster housing on all 1968 XR7 model Cougars. All electrical harnesses are inspected, professionally repaired (when needed), tested, and ready to install. Harness marked C8WB-10B942-J.Check out the video below on our new gauge tester: ...

$0 Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15744 -

Used under dash wiring harness repair plug and pigtail to the dash mounted courtesy light on the Mercury Cougar. The socket is the same on both sides. This is part of the 14401 main under dash wiring harness.

$0 Price: $71.05

Buy Details

Availability: In-Stock Item
Item #: 30742 -

Reproduction sound deadener for the seat divider on the 1967 - 1970 Mercury Cougar. This reproduction is as close to the original as possible, and is comprised of a mastic material. This item is trimmable and will fit bot the 67 - 68 and 69 - 70 seat divider.

$43.00 Price: $62.05

Buy Details

Availability: In-Stock Item
Item #: 11842 -

5/16" thick sound deadening and heat reflecting material, comes in a 4' X 6' sheet that can be cut to fit. This insulation consists of two layers of polyethylene bubble film sandwiched between two layers of aluminum foil. Temperature range rated -60 deg. F. to 180 deg. F. Combining this with the tar-based sound deadener underlayment will result in similar sound deadening as the OEM sound deadener.Below is listed how many rolls you will need to underlay the sections of a Cougar:  Area...

$0 Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 25937 -

This aluminum backed, tar sound deadener with adhesive is approximately 1/16 of an inch thick and works well behind door panels, at the firewall and under the headliner as a sound, heat and vapor barrier. One sheet required per door. Cut to fit, then remove paper backing to reveal adhesive, and stick in place. Comes in a 36 inch tall by 50 inch wide roll. *NOTE* Use caution when working with this product. The thin sheet of aluminum is quite sharp. We highly recommend using gloves. Before...

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 26250 -

Reproduction Space Save Tire Instructions Decal for the 1968 - 1973 Mercury Cougar / Ford MustangThis yellow sticker actually came out in 1971-ish. These were sent to previous owners of cars with space saver tires, with instructions to apply sticker to the space saver rim. We believe that they were factory installed with B.F. Goodrich space saver tires starting in 1971 for safety reasons. 

$0 Price: $25.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23846 -

Aluminum spacer used on 289/302/351 engines for mounting the alternator. Length is 1-5/8 inches long, mounts between the alternator and the cylinder head.

$0 Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11907 -

Used alternator fan spacer for the 1967 - 1973 Mercury Cougar or Ford Mustang.  This spacer also fits many other Ford applications.  Ford part number: C5AZ-10A344-B.

$0 Price: $92.65

Buy Details

Availability: In-Stock Item
Item #: 41472 -

Reproduction 428 Cobra Jet Exhaust Manifold Spacer 1968 - 1970 Mercury Cougar, Ford Mustang, Shelby and Torino Repro

$0 Price: $85.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32717 -

Used exhaust manifold spacer without butterfly valve for use on 1967 to mid 1968 Mercury Cougar, Mercury Cyclone, Ford Fairlane, and Ford Mustang with 390 or 427-4V engines. Straight factory used spacer. Most cars came equipped with a thermal spacer that often times gets frozen with time. No obstruction with this one.Note - Does not fit the slightly larger 428CJ exhaust manifolds. Ford part number C6OZ-9A427.

$0 Price: $89.09

Buy Details

Availability: In-Stock Item
Item #: 31846 -

Crankshaft or dampener spacer for any FE Ford engine. 1965 - 1971 Ford or Mercury crankshaft spacer 352, 390, 427, 428, all FE engines. New manufactured.

$0 Price: $64.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23767 -

B8AZ-6359-A Crankshaft or dampener spacer for any FE Ford engine. 1965 - 1971 Ford or Mercury crankshaft spacer 352, 390, 427, 428, all FE engines. Used spacer, will show a little wear from the outside seal. 

$0 Price: $9.86

Buy Details

Availability: In-Stock Item
Item #: 14-1037 -

Used spacer that fits inside your seat belt buckle and serves as a stop for when you assemble the metal buckle into the face plate/bezel. Installation is as shown in the pictures above.  Sold individually, one per buckle.

$0 Price: $25.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0119 -

Used steering column tube and locking pawl spacer for the Mercury Cougar or Ford Mustang equipped with the tilt / tilt away steering column. This unit is used to align the inner steering column tube and align the locking pawl cable with the lower flange. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...