Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2593-2640 of 5477
$0 Price: $179.17

Buy Details

Availability: In-Stock Item
Item #: 41153 -

AMK engine fastener kit for 1968 Mercury Cougar and 1968 Ford Mustang all with C, F, or J code 289 / 302 engines with air conditioning. This kit claims to have 137 pieces.Kit typically includes: fasteners to attach air cleaner, carburetor, crank pulley, distributor / points / condenser / vacuum advance, drain plugs, engine tag, exhaust manifolds, fan / fan clutch, fuel pump, shroud, ignition coil and strap, intake manifold, oil filter adapter, oil pan, starter, timing cover, valve covers,...

$0 Price: $163.65

Buy Details

Availability: In-Stock Item
Item #: 41152 -

Complete engine mounting hardware kit for the 1968 289/302 without A/C. See list below to see what comes in the kit. Click on image to enlarge.

$0 Price: $177.35

Buy Details

Availability: In-Stock Item
Item #: 41169 -

AMK engine fastener kit for 1968-69 Mercury Cougar and Ford Mustangall with S code 390-4V or 390GT engines. This kit claims to have 138 pieces.Kit typically includes: fasteners to attach air cleaner, carburetor, crank pulley, distributor / points / condenser / vacuum advance, drain plugs, engine tag, exhaust manifolds, fan / fan clutch, fuel pump, shroud, ignition coil and strap, intake manifold, oil filter adapter, oil pan, starter, timing cover, valve covers, water neck, water pump,*Note -...

$0 Price: $170.85

Buy Details

Availability: In-Stock Item
Item #: 41170 -

AMK engine fastener kit for 1968 Mercury Cougar / Comet, and Ford Mustang / Fairlane all with R code 428 Cobra Jet engines. This kit claims to have 145 pieces.Kit typically includes: fasteners to attach air cleaner, carburetor, crank pulley, distributor / points / condenser / vacuum advance, drain plugs, engine tag, exhaust manifolds, fan / fan clutch, fuel pump, shroud, ignition coil and strap, intake manifold, oil filter adapter, oil pan, starter, timing cover, valve covers, water neck,...

$0 Price: $375.03

Buy Details

Availability: In-Stock Item
Item #: 41329 -

Reproduction body / exterior master fastener kit for the Mercury Cougar that fits both Standard and XR7. *NOTE* If you click on the selections below, they will take you to each of the sub kits that are included in the main fastener kit. In this kit you will receive the following fasteners: Hood Bumpers (adjustable) Hood Latch Dowell Valance (front) Valance (rear) Door Hinges Floorboard Hole Covers Fenders Fender Splash Shield Brackets Hood and Hinges Shock Tower Braces Cowl Brace to Cowl...

$0 Price: $131.85

Buy Details

Availability: In-Stock Item
Item #: 41073 -

Reproduction master interior fastener kit for the Mercury Cougar Standard. This kit contains 264 fasteners in total. *NOTE* If you click on the selections below, they will take you to each of the sub kits that are included in the main fastener kit. In this kit you will receive the following fasteners: Armrests (front) Armrests (rear) Scuff Plates (door opening) Sun Visor Brackets Glove Box Catch Glove Box Latch Glove Box Liner Ashtray Liner Seat Stops (front of seat backs) Mirror to...

$0 Price: $145.55

Buy Details

Availability: In-Stock Item
Item #: 41094 -

Reproduction master interior fastener kit for the Mercury Cougar XR7. This kit contains 297 fasteners in total. *NOTE* If you click on the selections below, they will take you to each of the sub kits that are included in the main fastener kit. In this kit you will receive the following fasteners: Armrests (front) Armrests (rear) Scuff Plates (door opening) Sun Visor Brackets Glover Box Catch Glove Box Latch Glove Box Liner Ashtray Liner Seat Stops (front seat backs) Carpet to Floor (carpet...

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32976 -

The car pictured is a 67, but the copyright says "1969 Fred Bonner Corporation" and the header says Mercury Cougar introduced 1968.Measures 5"x7"

$0 Price: $164.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24118 -

Used Grade "A" Grille Center Medallion for the 1967 and 1968 Mercury Cougar. These will not have pits or damage to the chrome. Unfortunately the softer black background insert will often times have marks. Ford part # C7WB-8B344-A. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! Check out this video ...

$0 Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19013 -

What a difference a few minor blemishes can make in price! Our grade "B" used centers will always have a few minor dings as shown and maybe some very minor pitting in the painted part but after some clean up they will look almost as good as our grade "A" units when viewed from several feet away. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! Check out this video ...

$0 Price: $150.03

Buy Details

Availability: In-Stock Item
Item #: 31043 -

Rechromed Grille Center Medallion for the 1967 and 1968 Mercury Cougar. Unfortunately the polishing and plating process will take away much of the detail. Cores must be pit free or very close to. Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If...

$0 Price: $3.05

Buy Details

Availability: In-Stock Item
Item #: 41363 -

Reproduction intake manifold spacer for the Mercury Cougar or Ford Mustang equipped with the 390 or 428 engine. Sold individually, # VI.

$0 Price: $224.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33512 -

Used vintage Mercury Cougar Fire Chief bump n go mystery car. This collectors toy is in great condition with original packaging. Runs on two D batteries (we haven't tested it) and will cruise around any table top without going over the edge. Simply holding this car in your hands gives you a great feeling of nostalgia and is sure to zip you back to the days when you were a kid eating a bowl of cereal on a Saturday morning playing with this Fire Chief Cougar around the kitchen table....

$0 Price: $18.11

Buy Details

Availability: In-Stock Item
Item #: 12-0055 -

This 12" x 18" parking sign is the perfect way for your Cougar to mark its territory. Bold red lettering announces that lesser cars are not welcome. Durable .040 gauge aluminum with two pre-drilled holes for easy hanging. Makes a great gift!Our review: Print quality isn't as crisp as actual road signs if you look real close, but it looks good from a couple feet away. Seems durable enough for outdoor use. We're testing them in the parking lot outside our shop for UV resistance, stand by for an...

$0 Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22990 -

Used aluminum "Mercury Man" head for the center grille medallion. These are just pressed and swedged into the die cast bezel and come out easily with a light tap from behind. Keep in mind these highly amplified pictures make the emblem look much worse than it really is. Do know that the one you get will have light road debris wear but no major scratches, pits or scrapes. You will also want to replace the background foil decal when you purchase this emblem. Part of Ford assembly C7WY-8A223-A ...

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16247 -

Good used metal portion of the door panel. If yours is bent or you're doing custom made door panels, you will need these.

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16248 -

Good used metal portion of the door panel. If yours is bent or you're doing custom made door panels, you will need these.

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-1026 -

Metal support piece for the drivers side dash bezel. This piece mounts on top of the dash bezel and adds strength to where it mounts to the dash. It will require 5 screws to attach the dash. Check out our video on dash removal and restoration: ...

$0 Price: $18.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33786 -

Top bracket that attaches dash pad to driver side instrument cluster for all 1967-68 Mercury Cougars. Standard and XR7 models. Normally bare or zinc coated steel. This is a needed plate, it reinforces the top of the plastic of the instrument cluster and provides some strength when attaching the dash pad. Ford part number C7WY-10C899.

$0 Price: $54.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-1027 -

Metal support piece for the passenger side xr7 dash bezel used on the LATE 1968 Cougar, much better than the multiple piece brackets found on the majority of 67 and 68 xr7 models. This piece mounts on top of the dash bezel and adds strength to where it mounts to the dash. It will require the use of epoxy or tiny shallow depth screws to adhere it to the plastic bezel. Through 67-68, there were four different style brackets, you can see all four by following this link. Check out our video on...

$0 Price: $19.67

Buy Details

Availability: In-Stock Item
Item #: 41570 -

Special cast-metal bracket glues to windshield. Fits the original and most reproduction mirror ball arms. This version is shiny chrome instead of satin silver like the originals. The screws are also incorrect. Otherwise nice quality.

$0 Price: $8.65

Buy Details

Availability: In-Stock Item
Item #: 41753 -

Tired of your mirror falling out of adjustment? This installs easily and is correct in all details. Unlike the two piece unit we offer this one has the correct satin finish and correct screws. Replaces Ford Part #: C2SZ-17690-F. Reference from mercurycougar.net: Best guys to always talk to about Cougars..will take the time on the phone with you, call you back if you leave a message, got all the time in the world for you when you're talking 'cause you're important to them. Greatest thing for...

$0 Price: $13.55

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 26614 -

This product has received the 'Crappy Product' certificate. Items that receive the 'Crappy Product' certificate are products that we carry for comparison purposes as they are often the version offered by other vendors or because it is the only version available. We would not be willing to use these parts on our own cars, and we do not recommend purchasing these parts. WE ARE NOT ABLE TO ACCEPT RETURNS FOR THESE PARTS. Low quality reproduction thin rubber mirror gasket. This is nothing like the...

$0 Price: $35.69

Buy Details

Availability: In-Stock Item
Item #: 12930 -

Designed as a direct-fit OE-style replacement, this modulator valve will fit directly into the factory location of your current Cougar or Mustang valve. Also known as the throttle valve, this valve controls vacuum to the transmission as you press the gas pedal, and it will apply higher control pressure for better quality shifts at higher RPMs.

$0 Price: $28.42

Buy Details

Availability: In-Stock Item
Item #: 14925 -

OE Steel Transmission Modulator Line for the 1967 - 1968 Mercury Cougar equipped with the C4 transmission.

$0 Price: $47.05

Buy Details

Availability: In-Stock Item
Item #: 14928 -

Stainless Steel Transmission Modulator Line for the 1967, 1968, 1969 and 1970 Mercury Cougar or Ford Mustang with the C6 transmission.

$0 Price: $119.75

Buy Details

Availability: In-Stock Item
Item #: 13716 -

These black Monte Carlo bars are equipped with Heim joints for smoother operation. Replaces Ford Part # C7ZZ-16A052-BJB.

$0 Price: $43.15

Buy Details

Availability: In-Stock Item
Item #: 11328 -

Curved Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford Part # C7ZZ-16A052-BRB. ...

$0 Price: $61.15

Buy Details

Availability: In-Stock Item
Item #: 11329 -

Curved Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-BRC. ...

$0 Price: $30.35

Buy Details

Availability: In-Stock Item
Item #: 11326 -

Straight Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-ARB.

$0 Price: $39.95

Buy Details

Availability: In-Stock Item
Item #: 11327 -

Straight Monte Carlo Bar in a chrome finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C7ZZ-16A052-ARC.

$0 Price: $192.85

Buy Details

Availability: Out of Stock
Item #: 41412 -

Tested and working sequential turn signal motor for the mid 1967 and all 1968 Mercury Cougars. This is the dual plug motor compared to the single plug 1967 turn signal relay. New in box (Motorcraft box) unit that is tested and will be functional. Trouble shooting these systems takes time. A single bad ground at any portion of the turn signal circuit can cause no end to problems.We suggest you consider our all inclusive solid state unit that replaces all the units in the trunk if you have...

$0 Price: $79.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20574 -

Tested, cleaned and working sequential turn signal motor for the mid 1967 and all 1968 Mercury Cougars. This is the dual plug motor compared to the single plug 1967 turn signal relay. Clean used unit that is tested and will be functional. This unit will not be rusty or have internal water damage, may have minor repairs, no cut wires. Trouble shooting these systems takes time. A single bad ground at any portion of the turn signal circuit can cause no end to problems. We suggest you consider our...

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 13787 -

Nice reproduction of an obsolete motor mount. Left is the same as right, sold individually. This isolator is used with the 390, 427, 428 and 429 Cobra Jet engines.  Sold individually. Replaces Ford Part #: D1ZZ-6038.

$29.99 Price: $32.27

Buy Details

Availability: In-Stock Item
Item #: 15307 -

Keep in mind that if you have the original motor mounts in your 1967 with a 289 or 1969-1970 convertible these mounts will not work. Nobody sells motor mounts for them, period. This is contrary to what every auto parts store will tell you. Your options are to purchase our (used 68-70 frame stands) or modify your existing ones.Sold individually, two required per car, left is the same as right.

$0 Price: $29.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33078 -

Motor Trend Magazine January 1968 issue featuring the 1968 Cougar, Mustang, Camaro, Barracuda, Javelin and Firebird. Condition is lightly used. List of topics in this issue are: Concept cars coming out of DetroitThe Charlotte national 500Classic cars of the 50'sLatest auto news from EuropeReturning to 1919 & Hispano-Stutz 37.2Racing cars = Barracuda 340 vs. Camaro 396 vs. Cougar 390 vs. Firebird 400 vs. Javelin 343 vs. Mustang 390All the usual fun and eye catching classic ads common in...

$0 Price: $72.55

Buy Details

Availability: In-Stock Item
Item #: 55889 -

These reproduction A pillarpads / moulding / trim were used on the 1967 - 1968 Mustang Coupe and Fastback and even though they carry a C7WB part number on the back side they were never used on a 67 or 68 Cougar. Reason being is they are two wide to fit next to the wide Cougar roof side Pinch weld moulding, soft trim. If you use the thin inexpensive pinch weld moulding we sell you can use these. Also note that the 1968 1/2 standard level interior used the thin pinch weld moulding from the...

$0 Price: $68.15

Buy Details

Availability: In-Stock Item
Item #: 12023 -

These reproduction A pillarpads / moulding / trim were used on the 1967 - 1968 Mustang Coupe and Fastback and even though they carry a C7WB part number on the back side they were never used on a 67 or 68 Cougar. Reason being is they are two wide to fit next to the wide Cougar roof side Pinch weld moulding, soft trim. If you use the thin inexpensive pinch weld moulding we sell you can use these. Also note that the 1968 1/2 standard level interior used the thin pinch weld moulding from the...

$0 Price: $72.55

Buy Details

Availability: In-Stock Item
Item #: 12038 -

These reproduction A pillarpads / moulding / trim were used on the 1967 - 1968 Mustang Coupe and Fastback and even though they carry a C7WB part number on the back side they were never used on a 67 or 68 Cougar. Reason being is they are two wide to fit next to the wide Cougar roof side Pinch weld moulding, soft trim. If you use the thin inexpensive pinch weld moulding we sell you can use these. Also note that the 1968 1/2 standard level interior used the thin pinch weld moulding from the...

$0 Price: $134.85

Buy Details

Availability: Out of Stock
Item #: 17302 -

Grade A condition - driver side 'A' pillar pad, clips into the 'A' pillar post between the windshield and the door glass. Fits 1968 Mercury Cougar, driver side only. Found on XR7 and most Standard model Cougars. Grade A condition, will have supple vinyl without damage. minor or no de-lamination. Attaching clips sold separately. Please include desired color in the 'notes' or 'comments' section of your order. We can often supply your color, limited to available stock. For best results you should...

$0 Price: $64.85

Buy Details

Availability: Out of Stock
Item #: 21610 -

Grade B condition - driver side 'A' pillar pad, clips into the 'A' pillar post between the windshield and the door glass. Fits 1968 Mercury Cougar, driver side only. Found on XR7 and most Standard model Cougars. Grade B condition, will some foam de-lamination on the back. Attaching clips sold separately. Please include desired color in the 'notes' or 'comments' section of your order. We can often supply your color, limited to available stock. For best results you should plan on spraying...

$0 Price: $66.85

Buy Details

Availability: In-Stock Item
Item #: 12041 -

These reproduction A pillarpads / moulding / trim were used on the 1967 - 1968 Mustang Coupe and Fastback and even though they carry a C7WB part number on the back side they were never used on a 67 or 68 Cougar. Reason being is they are two wide to fit next to the wide Cougar roof side Pinch weld moulding, soft trim. If you use the thin inexpensive pinch weld moulding we sell you can use these. Also note that the 1968 1/2 standard level interior used the thin pinch weld moulding from the...

$0 Price: $64.85

Buy Details

Availability: Out of Stock
Item #: 27600 -

Grade B condition - passenger side 'A' pillar pad, clips into the 'A' pillar post between the windshield and the door glass. Fits 1968 Mercury Cougar, passenger side only. Found on XR7 and most Standard model Cougars. Grade B condition, will some foam de-lamination on the back. Attaching clips sold separately. Please include desired color in the 'notes' or 'comments' section of your order. We can often supply your color, limited to available stock. For best results you should plan on...

$0 Price: $72.55

Buy Details

Availability: In-Stock Item
Item #: 12035 -

These reproduction A pillarpads / moulding / trim were used on the 1967 - 1968 Mustang Coupe and Fastback and even though they carry a C7WB part number on the back side they were never used on a 67 or 68 Cougar. Reason being is they are two wide to fit next to the wide Cougar roof side Pinch weld moulding, soft trim. If you use the thin inexpensive pinch weld moulding we sell you can use these. Also note that the 1968 1/2 standard level interior used the thin pinch weld moulding from the...

$0 Price: $72.86

Buy Details

Availability: In-Stock Item
Item #: 24198 -

Restored passenger side (right hand) center grill moulding / trim for the Mercury Cougar. As you can tell, price wise, you are much better off to purchase the entire set together as opposed to one at a time.Ford part # C7WY-8A158-A. *NOTE* This unit carries a $20 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for you in this moulding / trim...

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18513 -

Used passenger side (right hand) center grill moulding / trim for the Mercury Cougar. Good used driver quality trim with no obvious dings, deep scratches, or corrosion. Perfect for your daily driver that is in above average condition. Ford part # C7WY-8A158-A. *NOTE* This unit carries a $20 refundable core charge. If you are unable to return your core within 30 days after the initial purchase, your refund will be in store credit only. If you have an unacceptable core, we have a core option for...