1968 Mercury Cougar

Good clean used passenger side (right hand) brake spindle for your Mercury Cougar or Ford Mustang equipped with front drum brakes. Cars with disc and drum brakes used the same spindle in 1967, but this spindle was carried over through 1969 on drum brake cars only. Bearing surface measurements: 0.75" and 1.25". We check these very closely, and if they are not perfect, we chuck'em into the scrap pile. All have a Ford C6O... casting number.Ford part # C9OZ-3105-C.

Often when your fuel gauge is acting up, this is the culprit, not the gauge or sending unit. The benefit of using this foam float, is that sometimes the hollow brass float will leak, causing a bad reading. This foam version of the float is fuel resistant and will never leak. Replaces Ford part #C0AZ-9202-B.Check out the video below on our new gauge tester: ...

Often when your fuel gauge is acting up, this is the culprit, not the gauge or sending unit. The problem with these brass floats, is that after year of being in contact with fuel, they will begin to corrode and disintegrate. We suggest going with the new foam floats. They are fuel resistant and will last longer. Find it here. Replaces Ford part #C0AZ-9202-B.Check out the video below on our new gauge tester: ...

Core driver side (left hand) and passenger side (right hand) bucket seats for the Mercury Cougar or Ford Mustang equipped with the decor interior option. These bucket seats are sold as a pair, but if you need the passenger side only, call us and we can offer you a substantial discount. If you need a driver side bucket only we cannot give you a price break, but the shipping will in fact be cut in half. The foam almost will always be deteriorating or even missing. They will be solid core frames...

Core driver side (left hand) and passenger side (right hand) pair of bucket seat cores for the Mercury Cougar XR7. The foam almost will always be deteriorating or even missing. They will be solid core frames taken from a Western parts car and from our experience are MUCH better quality than the Chinese made reproductions on the market. Seat tracks are sold separate. Seat hinge covers and hardware available separately.

Core driver side (left hand) bucket seat for the Mercury Cougar or Ford Mustang equipped with the decor interior option. The foam almost will always be deteriorating or even missing. They will be solid core frames taken from a Western parts car and from our experience are MUCH better quality than the Chinese made reproductions on the market. Seat tracks are sold separate. Seat hinge covers and hardware available separately.

Core passenger side (right hand) bucket seat for the Mercury Cougar or Ford Mustang equipped with the decor interior option. The foam almost will always be deteriorating or even missing. They will be solid core frames taken from a Western parts car and from our experience are MUCH better quality than the Chinese made reproductions on the market. Seat tracks are sold separate. Seat hinge covers and hardware available separately.

Grade A Decor used bucket seat vinyl trim panel. Available in 1968 interior colors. Please specify in the notes your desired color. Grade A will not have cuts or tears, there may be slight impressions in the vinyl or a warped backer board. Driver and passenger side are the same, sold individually. Typically these would have had a basic Ford part number of 60762.  We also have B grade used panels too, see related item. ...

Grade B Standard model Cougar Decor used bucket seat vinyl trim panel. Available in 1968 interior colors. Please specify in the notes your desired color. Grade B will have cuts or tears, there may be slight impressions in the vinyl or a warped backer board. Driver and passenger side are the same, sold individually. Typically these would have had a basic Ford part number of 60762.  We also have B grade used panels too, see related item. ...

Grade A XR7 used bucket seat vinyl trim panel. Available in 1968 interior colors. Please specify in the notes your desired color. Grade A will not have cuts or tears, there may be slight impressions in the vinyl or a warped backer board. Driver and passenger side are the same, sold individually. Typically these would have had a basic Ford part number of 60762.  We also have B grade used panels too, see related item. ...

Grade B used bucket seat vinyl trim panel. Available in 1968 interior colors. Please specify in the notes your desired color. Grade B will have cuts or tears, there may be slight impressions in the vinyl or a warped backer board. Driver and passenger side are the same, sold individually. Typically these would have had a basic Ford part number of 60762.  We also have B grade used panels too, see related item. ...

Used on the majority of Fords, this assembly can easily be removed without cutting or un-stitching the webbing. No rust, grade "A" show quality chrome, originally came stamped ROBBINS - JR - 7600 or HAMILL H-000. If you have a preference as to which version you would like just let us know in the memo box at checkout. Check out our video "All about seat belts" below. ...

These often missing parts are glued into the two recessed areas designed to hold the female portion of your lap belt. They prevent wear on your buckles and keep them from rattling if you are one to leave the shoulder harness off. Sold individually, 2 required per car. There are at least two different styles of these, one version has a ridge near the top. Either one may be shipped.Ford part number C7ZZ-65044E16-A. ...

Correct Backup Light Bulb for the 1967 - 1968 Mercury Cougar. Owners Manual and shop manual incorrectly state the backup light bulb to be the 1156.

Brand new 1157 (dual-filament) exterior stop lamp / turn signal light bulb for the Mercury Cougar or any vehicle equipped with 1157 bulbs. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. For even brighter...

The 67 -73 Cougar uses the 1157A (Amber) bulb for the turn signals.  This bulb will also fit other applications that require an 1157A or 1157NA bulb. Replaces bulb #: 1157A or 1157NA

Sold individually these are the very hard to find side marker bulbs for your 1968 Cougar. The 1968 Ford Manuals call for a 97N bulb but that is an error believe it or not... As shown in the NOS light below these bulbs came painted, ALL MODERN REPRODUCTIONS ARE MADE WITH AMBER GLASS (See Amber Glass Listing). The paint is very prone to chipping and after examining several NOS lights that we presume have never been opened we found a couple to have been scratched prior to being installed in the...

Replacement lamp for the speedometer, heater controls, ashtray, automatic shift indicator, low fuel, seat belt reminder, or emergency flasher warning lights on the visual check panel.

This bulb fits several applications including the door panel courtesy lights in the 1967 - 1968.

New 1891 bulb for the 1967-68 XR7 overhead console. This bulb will also fit the 67 - 68 rear console light. You can find the LED version of this bulb here.

New 1895 bulb for the instrument clusters. *Note - The table and the owners manuals are wrong for the Visual Check Panel bulbs, Ford literature calls out a 1895 bulb, when in fact the correct bulb is 1891.

Reproduction 631 Glove / Luggage Compartment / Under Dash Courtesy / Trunk Light Bulb for the 1967 - 1973 Mercury Cougar

For the in-dash ashtray.

Sold separately, four required per car. Replaces Ford Part #: C2AZ-6223030.

Rubber bumper that fits into the bracket in the bottom center of the door shell. Fits all 1967-68 Mercury Cougar and 1965-68 Ford Mustangs. This is the rubber bumper for the window rest when the door glass is at its lowest. Bracket is in bottom of the center of the door. Fits both right and left doors.Correct for 1967 - 1968 but will work in 1969 - 1970 with Bolt-in glass if you cut it down. Sold separately, two required per car. Replaces Ford part # C5ZZ-6521762-B Check out our...

Used rubber bumper that fits into the bracket in the bottom center of the door shell. Fits all 1967-68 Mercury Cougar and 1965-68 Ford Mustangs. This is the rubber bumper for the window rest when the door glass is at its lowest. Bracket is in bottom of the center of the door. Fits both right and left doors. Correct for 1967 - 1968 but will work in 1969 - 1970 with Bolt-in glass if you cut it down. Sold separately, two required per car. Replaces Ford part # C5ZZ-6521762-B  Check out...

This option includes paying a core charge. By choosing this option, the re-chromed bumper you receive will have started the re-chroming process as an average quality core. We highly recommend that you send us your core first. Here's why: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming...

This option REQUIRES sending your core in advance. Here are the advantages of pre-sending your core: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming process as a superior quality core. You can find out the quality of your core before paying a core charge and avoid unnecessary core charges....

Mounts to the bottom lip of the coil spring cover, two required per car, sold individually. Replaces Ford part #: C6OZ-3020-A.

Sold as a pair. Two required per car.Replaces Ford Part #: 380239.

This is the flat topped rubber bumper that attaches to the top part of your center grille and keeps a small gap between the two panels to prevent paint chips. There were two versions of this bumper, one was this flat topped bumper, and the other had a rounded top. Find the round topped version here.

This little rubber part attaches to the top, flat part of your center grille and keeps a small gap between the two panels to prevent paint chips. This is actually an ash tray bumper but it is a decent substitute (a little smaller than the original) for the center grille bumper. The originals had a flat top as opposed to this bumper which has a rounded top. You can find the flat topped version here. ...

Sold individually, two required per car. Replaces Ford part # C3DZ-4730.

This option includes paying a core charge. By choosing this option, the re-chromed bumper you receive will have started the re-chroming process as an average quality core. We highly recommend that you send us your core first. Here's why: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming...

This option REQUIRES sending your core in advance. Here are the advantages of pre-sending your core: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming process as a superior quality core. You can find out the quality of your core before paying a core charge and avoid unnecessary core charges....

Mounts over rear axle ends into the body/frame, two required per car, this is the more pointed Christmas tree shaped version.Ford part # C6AZ-4730

Bracket with attached rubber bumper that attaches to the center body plate over the 8 inch third member of any 1967-68 Mercury Cougar. Attaches with a single bolt, body plate available separately.

THIS KIT HAS A CORE CHARGE OF $950 Here is a time and money saving package deal for the person restoring their 1967 or 1968 Cougar. This package includes: Hood lip moulding Fender extension mouldings Quarter extension mouldings Grille center trim Deck lid moulding Drip rail mouldings Nine piece front and rear window trim Front and rear Award Winning Bumpers All parts are show quality. The bumpers are triple plated chrome, the aluminum has the correct anodized finish just like NOS and the...

This bumper bolt is sold individually and replaces Ford part # C4ZB-17758-A. It features the correct "button" head profile covered in stainless steel. Silver zinc with wax coating to extend plating life. Reduced shoulder height allows the nut to seat properly.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more...

C7WY-17767-A Front bumper mounting arm, 1967-68 Mercury Cougar, driver side.

C7WY-17766-A Front bumper mounting arm, 1967-68 Mercury Cougar, passenger side.

Mustang bumper brackets do not work on Cougar. C7WY-17755-A.

Often passenger side brackets have battery acid damage thus the higher price for clean, undamaged passenger side brackets. C7WY-17754-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is...

Sold individually, two required per car. Right is the same as left. These Western rear bumper brackets are not heavily rusted, the threads are in perfect shape and they are not bent. Master part number C7WY-17A750-A.

Good used set of crack free, bend free original brackets. These are Western parts that have never been exposed to road salt and can easily be restored to show quality standards.

Used driver side (left hand) rear bumper guard for the Mercury Cougar. The chrome plating was pretty low quality back in the day and this unit will have some scratches and pitting as it is an almost 50 year old original part. Mounting diagram not included, if you need one CLICK HERE for a printable version. Ford Part #: C7WY-17985-A. *NOTE* Driver side is stamped with an "L" on the backside. ...

Used passenger side (right hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting as it is an almost 50 year old original part. Mounting diagram not included, if you need one CLICK HERE for a printable version. Ford part # C7WY-17984-A. *NOTE* Passenger side is stamped with an "R" on the backside. ...

This option includes paying a core charge. By choosing this option, the re-chromed item you receive will have started the re-chroming process as an average quality core.We highly recommend that you send us your core first. Here's why: We can core match your bumper guards. Bumpers guards that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the...