Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 4033-4080 of 5477
$0 Price: $32.55

Buy Details

Availability: In-Stock Item
Item #: 26044 -

This pair of sturdy cardboard taillight covers / protectors are designed to protect your taillight sockets from being dislodged or damaged. In addition to the protection they offer they also serve to give a "cleaner" look to your luggage compartment. Will require minor trimming. Please let us know if you have a good used example so as to use as a template to perfect these parts.

$0 Price: $229.25

Buy Details

Availability: In-Stock Item
Item #: 31683 -

Reproduction taillight panel for the 67-68 Cougar. Yet another in a long line of great fitting parts from our friends over at Dynacorn, this replacement taillight panel is perfect for those of you who have rust holes in and around the taillight area. As seen in the photo above, this is only the taillight panel and will not include the quarter extension panels or the rear taillight lower structure. ...

$0 Price: $485.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27029 -

This is how most of our taillight panels are cut off. If you only need a partial panel we can do that too, just give us a ring. Keep in mind we only cut panels like this if both 1/4's are ruined. It is getting very hard to come up with some of these cuts. ...

$0 Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27323 -

1968 Mercury Cougar tail light wiring harness repair plug end. We clip these with a generous amount of wiring (6 plus inches) that allows you the car owner to repair your own tail light wiring harnesses. This is a red 4 pin plug, that is designated D-3 in the wiring diagram. This plug plugs into the sequential turn signal relay in the trunk. We are offering all of the various plugs for repairs. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most...

$0 Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27322 -

1968 Mercury Cougar tail light wiring harness repair plug end. We clip these with a generous amount of wiring (6 plus inches) that allows you the car owner to repair your own tail light wiring harnesses. This is a black 4 pin plug, that is designated D-4 in the wiring diagram. This plug plugs into the sequential turn signal relay in the trunk. We are offering all of the various plugs for repairs.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most...

$0 Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27321 -

1968 Mercury Cougar tail light wiring harness repair plug end. We clip these with a generous amount of wiring (6 plus inches) that allows you the car owner to repair your own tail light wiring harnesses. This is a white 4 pin plug, that is designated D-4 in the wiring diagram. This plug plugs into the sequential turn signal relay in the trunk. We are offering all of the various plugs for repairs. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most...

$0 Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27320 -

1968 Mercury Cougar tail light wiring harness repair plug end. We clip these with a generous amount of wiring (6 plus inches) that allows you the car owner to repair your own tail light wiring harnesses. This is a black 2 pin plug, that is designated D41 in the wiring diagram. This plug plugs into the sequential turn signal relay in the trunk. We are offering all of the various plugs for repairs.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most...

$0 Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27319 -

1967 and 1968 Mercury Cougar tail light wiring harness repair plug end. We clip these with a generous amount of wiring (6 plus inches) that allows you the car owner to repair your own tail light wiring harnesses. This is a black 4 pin plug, that is designated J77 in the wiring diagram. This plug plugs into the sequential turn signal motor in the trunk. We are offering all of the various plugs for repairs. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s...

$0 Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27318 -

67 - 68 Cougar tail light wiring harness repair plug end. We clip these with a generous amount of wiring (6 plus inches) that allows you the car owner to repair your own tail light wiring harnesses. This is a black 5 pin plug, that is designated P79 in the wiring diagram. This plug plugs into the emergency warning relay flasher in the trunk. We are offering all of the various plugs for repairs.Good for both STD and XR7 models*NOTE* Need help diagnosing a Cougar turn signal problem? Victor...

$0 Price: $174.85

Buy Details

Availability: Out of Stock
Item #: 19303 -

1968 XR7 and standard Cougars use the same rear wiring harness to the taillights. This is a grade "B" grade harness that may be spliced or repaired. XR7 and Standard Cougars use the same rear wiring harness to the taillights, only the sub-harness that connects to it that runs along the underside of the package tray and down to the fuel sending unit differs XR7 vs. Standard. The major difference is that the xr7 utilizes a two wire plug and the Standard Cougar uses a single wire. Harness begins...

$0 Price: $26.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19305 -

This bracket attaches the vacuum storage tank for your headlights to the core support inside the driver fender. It differs from the 1967 bracket in that an oval hole was put in it to allow the socket and pigtail assembly for the side marker light to pass through the bracket located closest to the fender. 1969 uses the exact same bracket except for a slightly different clip design. Sold individually, two required per car. Cougar part number C8WY-13B008-A.

$0 Price: $6.89

Buy Details

Availability: In-Stock Item
Item #: 14737 -

New template to make your own package tray cover for the Mercury Cougar. Package trays are difficult to package and can be costly to ship.  This template will assist you in making your own. *NOTE* There is a slight difference in size between 1967 and 1968 package trays.

$0 Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 97979 -

This listing is for a TEMPLATE which would be used to cut your own shock tower weld in plates. Our supplier made a batch of weld in plates to the wrong thickness, so we're selling this template for anyone who has the ability to fabricate their own. As a stand alone item, this template will not work for what it's indented for because it's too thin. It's made from 18 gauge steel (the actual plates are supposed to be 11 gauge) so they're worth nothing more than being a pattern for the...

MSRP:$71.99
$71.99 Price: $28.53

Buy Details

Availability: In-Stock Item
Item #: 42497 -

These tension springs are located on either side of your hidden headlamp eyelids. Our springs are made from the exotic alloy "Inconel". Inconel springs have approximately ten times the memory of the originals which were made from the much more common and inexpensive "piano wire". These springs have been engineered to have the exact same elasticity as the originals but will last decades longer than the originals which from our experience with NOS, usually lose their memory within a year and...

$0 Price: $24.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19204 -

OEM Ford stove type bolt for the securing the early style belt tensioner pulley. For use with the 289 or 302 engine produced between 1/3/1967 and 3/1/1968. For use with part # C7AZ-8678-B which is the air conditioning belt adjustable pulley assembly. Ford Master Part # 382343-S.

$0 Price: $40.05

Buy Details

Availability: In-Stock Item
Item #: 10142 -

The Big Book is here! This cache of cool Mercury Cougar knowledge features 186 entertaining and informative pages that focus on the 1967-73 Cougar. Don Skinner, former editor at the Cascade Cougar Club, spent 8 years mining valuable data throughout the Cougar community and compiling all of his little gems into "The Big Book." This jewel is chock-full of great tech information, pictures, fun facts, production numbers, rare concept cars and much, much more. Many of the photos and documents...

$0 Price: $52.75

Buy Details

Availability: In-Stock Item
Item #: 30551 -

Here's a new book about the luxury king of classic Cougars, the XR7 G! The book contains many pictures and documents never published before. A great addition to your collection!From the author of The BIG BOOK of Cougar, Don Skinner.

$0 Price: $40.00

Buy Details

Availability: In-Stock Item
Item #: 12877 -

Here's a new book about the king of classic Cougars, the GT-E! This book starts out with the standard '68 Cougar and XR-7 as both models were available with the GT-E option. The reader is then taken through the early stages with the XR-7S and prototypes. Following these pages is the GT-E as we all know it, and then a brief venture into 1969. Lastly are parts lists for the 427 GT-E and the 428 GT-E. This book was written for the casual reader as well as the GT-E enthusiast.The book contains...

Thermactor Smog Ferrules - 390 / 427 / 428 - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang
All 1968 Ford and Mercury S code 390-4V engines sold in the US|All 1968 Ford and Mercury W code 427-4V engines sold in the US. | All 1968 / 1969 / 1970 428 Cobra Jet engines | All 1968 / 1969 / 1970 428 Super Cobra Jet engines
0
$0 Price: $90.95

Buy Details

Availability: In-Stock Item
Item #: 30895 -

Thermactor smog tube installation ferrules. Set of 8 nuts and barrel shaped ferrules.Fits: 1968 Ford and Mercury S code 390-4V engines sold in the US.1968 Ford and Mercury W code 427-4V engines sold in the US. 1968 / 1969 / 1970 428 Cobra Jet engines.1968 / 1969 / 1970 428 Super Cobra Jet engines. ...

$0 Price: $241.67

Buy Details

Availability: In-Stock Item
Item #: 30894 -

Three piece Thermactor Smog hose set; moulded, striped, and stamped like original factory installed hoses. The 1968 ink stamped was likely used partially into 1969. We also list hoses with the C9... stamps.Fits: 1968 Ford and Mercury S code 390-4V engines sold in the US.1968 Ford and Mercury W code 427-4V engines sold in the US1968 / 1969 428 Cobra Jet engines. 1968 / 1969 428 Super Cobra Jet engines. ...

$0 Price: $19.18

Buy Details

Availability: In-Stock Item
Item #: 12979 -

This fail safe thermostat can save you from costly engine damage during an overheat. They feature an exclusive technology that locks the valve open position if overheating occurs. This allows for maximum coolant flow when you need it most.

$0 Price: $12.36

Buy Details

Availability: In-Stock Item
Item #: 41408 -

For use in any 1967-1973 Mercury Cougar except for the 351c in stock configuration. Will work on 351c when you use this Bypass / Restriction plate conversion part. Check out this video

$0 Price: $15.53

Buy Details

Availability: In-Stock Item
Item #: 12977 -

This fail safe thermostat can save you from costly engine damage during an overheat. They feature an exclusive technology that locks the valve open position if overheating occurs. This allows for maximum coolant flow when you need it most.

$0 Price: $17.28

Buy Details

Availability: In-Stock Item
Item #: 14334 -

Fits all* Ford V-8 engines, 1967 - 1973. *- NOTE: This will fit in the 351C, 351M or 400 but will not block off the port to recirculate the water back through the engine.  This can cause the engine to run hotter than desired.

$0 Price: $19.18

Buy Details

Availability: In-Stock Item
Item #: 14332 -

Fits all* Ford V-8 engines, 1967 - 1973. *- NOTE: This will fit in the 351C, 351M or 400 but will not block off the port to recirculate the water back through the engine.  This can cause the engine to run hotter than desired.

$0 Price: $19.18

Buy Details

Availability: In-Stock Item
Item #: 14329 -

Fits all* Ford V-8 engines, 1967 - 1973. *- NOTE: This will fit in the 351C, 351M or 400 but will not block off the port to recirculate the water back through the engine.  This can cause the engine to run hotter than desired.

$0 Price: $29.82

Buy Details

Availability: In-Stock Item
Item #: 14300 -

Cast construction with very good quality chrome. Looks great with chrome valve covers and air cleaner. For some helpful tips on upgrading your Cougar (or Mustang) cooling system, check out our video:

MSRP:$22.85
$22.85 Price: $19.67

Buy Details

Availability: In-Stock Item
Item #: 14017 -

Aluminum casting, made in the U.S.A. Exact copy of original, including part numbers. Fits any small block Ford 260/289/302/351W but would have only been correct on 1967 Mercury Cougar and 1965-67 Ford and Mustang with 289 engines. Has natural cast finish as original. Does not have the provision for the thermal vacuum switch starting in 1968 and newer small block Ford V-8 engines. Replaces Ford Part #: C5OE-8592-A For some helpful tips on upgrading your Cougar (or Mustang) cooling system, check...

$0 Price: $30.07

Buy Details

Availability: In-Stock Item
Item #: 10657 -

New water neck or thermostat housing for all 1967-70 Mercury Cougars or most other Fords with 289/302/351W engines. Cast aluminum with a shiny finish as shown. Removable plug for use with thermal vacuum switches. Comes complete with gasket.

$0 Price: $30.07

Buy Details

Availability: In-Stock Item
Item #: 10658 -

New water neck of thermostat housing for most 1967-70 Mercury Cougar or most other Fords with 390/427/428CJ engines. Cast aluminum without casting marks, sand cast finish. Comes with screw-in cap in place of the thermal switch if you like, includes gasket. For use with common 2-1/8 inch thermostats. *Note - very early 1967 cars were still using the 2-1/2 inch thermostats. Cutoff was around November 1966.

$0 Price: $52.97

Buy Details

Availability: Out of Stock
Item #: 31398 -

Used aluminum water neck of thermostat housing for most 1967-70 Mercury Cougar or most other Fords with 390/427/428CJ engines. Cast aluminum finish. Comes with threaded hole for either a screw-in cap, or thermal switch. For use with common 2-1/8 inch thermostats. Correct for 1968-70 FE engines. Not going to lie, these will show some signs of electrolysis on the inside and where the hose slips on. Additionally, we notice that the threads get a bit rotted out where the thermal switch...

$0 Price: $38.25

Buy Details

Availability: In-Stock Item
Item #: 41584 -

Reproduction aluminum cast A356 water neck for FE Big Block engines. Made from original factory blueprint, and includes the correct stamping. Will fit the 67 Big Block, but markings are correct for 68. Replaces Ford Part #: C8AE-8592-B.

$0 Price: $5.95

Buy Details

Availability: In-Stock Item
Item #: 14-0035 -

New blue removable strength thread locker for your project. This is a must have item if you are reassembling your pride and joy after restoration or just changing out parts. Often times, the vibrations from these antiques can vibrate loose the fasteners used to hold it together. If you use this, you can rest assured that your Merc or Ford will not fall apart from fasteners that have vibrated loose.

$0 Price: $12.15

Buy Details

Availability: In-Stock Item
Item #: 14-0027 -

New red permanent strength thread locker for your project. This is a must have item if you are reassembling your pride and joy after restoration or just changing out parts. Often times, the vibrations from these antiques can vibrate loose the fasteners used to hold it together. If you use this, you can rest assured that your Merc or Ford will not fall apart from fasteners that have vibrated loose.

$0 Price: $42.75

Buy Details

Availability: In-Stock Item
Item #: 14624 -

Kit comes complete with accelerator linkage rod, bushings and clip kit and return spring. Replaces Ford Part #: c5zz-9a702

$0 Price: $43.07

Buy Details

Availability: In-Stock Item
Item #: 13950 -

Kit comes complete with accelerator linkage rod, bushings and clip kit and return spring. Replaces Ford Part #: C5ZZ-9A702.

$0 Price: $15.17

Buy Details

Availability: In-Stock Item
Item #: 13933 -

Great little kit that is a big time saver! Correct in detail, every 40 year old Cougar needs this kit! Replaces Ford Part #: C5ZZ-9A702-MK.

$0 Price: $14.55

Buy Details

Availability: In-Stock Item
Item #: 13856 -

Correct texture Gas Pedal, includes stainless steel trim.

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26194 -

Black moulded plastic pedal pad for all 1967 and 1968 Mercury Cougars regardless of engine or transmissions. Used pads with various amounts of wear on the surface. Stainless surround trim available too - Part number C5ZZ-9735-A.

$0 Price: $7.15

Buy Details

Availability: Out of Stock
Item #: 13951 -

Correct spring, black phosphorus plated. Does not have the same tension as original spring. We also have a Concours spring that has the correct tension. Replaces Ford Part #: C5ZZ-9737-B.*Trivia* Did you know the first Cougar cast for production in 1968 was this "Custom Cougar"? This fine example was offered up on ebay summer 2008 for a mere $6500.

$0 Price: $10.95

Buy Details

Availability: In-Stock Item
Item #: 13952 -

Good reproduction of the 1967 throttle rod for 289 engines. It will fit on 1968 with any 289 or 302 engine with Ford Autolite carburetors. Will also fit most Holley and Edelbrock carburetors too. We also sell used versions of both 1967 and 1968 small block throttle rods. Consider also purchasing a linkage clip, see related items.Reference from mercurycougar.net: Best guys to always talk to about Cougars...will take the time on the phone with you, call you back if you leave a message, got all...

$0 Price: $20.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11069 -

Metal rod that hooks to the carburetor linkage and the accelerator pedal bellcrank, or shaft. Hooked end goes into the carburetor linkage, threaded end to the rear. Application 1968 Mercury Cougar and Ford Mustang with 289 or 302 engines. Ford part number C8ZZ-9A-702-A. A rod end clevis clip is needed for attachment to the carburetor - see part B7A-9826-A. *Note - not for use with factory cruise control.

$0 Price: $35.01

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11070 -

Metal rod that hooks to the carburetor linkage and the accelerator pedal bellcrank, or shaft. Rod measures 12.66 inches long. Hooked end goes into the carburetor linkage, threaded end to the rear. Application 1968 Mercury Cougar and Ford Mustang. A rod end clevis clip is needed for attachment to the carburetor - see part B7A-9826-A. Ford part number C8WY-9A702-A *Note - Before 12/11/1968. *Note - not for use with factory cruise control.

$0 Price: $31.85

Buy Details

Availability: In-Stock Item
Item #: 41865 -

Concours Correct Throttle Linkage Rod, 13 1/2" long, S code 390-4V, W code 427-4V, and R code 428CJ with factory 4 barrel HOLLEY carburetor, with out speed control.Replaces Ford Part # C8ZZ-9A702-A