Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 5041-5088 of 5492
MSRP:$34.00
Price: $20.00

Buy Details

Availability: Out of Stock, Discontinued
Item #: 14749 -

This listing is for ONE right rear (Replaces Ford part # D1ZZ-6529164-A) 1971 - 1973 Ford Mustang wheel lip mouldings. These are anodized aluminum wheel lip mouldings. These will need to be modified to fit your 1967 - 1968 Mercury Cougar (see video below). The rears will both need to be trimmed to fit correctly at the end closest to the bumper. You may elect to drill extra holes, it is up to you to decide whether the extra holes are drilled in the car or on the trim parts themselves. These...

Price: $270.86

Buy Details

Availability: Out of Stock
Item #: 42353 -

NOS passenger side front wheel lip moulding. Rare find, better snatch it up while you can!

Price: $10.67

Buy Details

Availability: Out of Stock
Item #: 12668 -

Driver side upper windshield mouldinig. Suitable for restoration or could fit right in on or your lower quality daily driver. Ford part number C5ZZ-6503145-B.

Price: $125.87

Buy Details

Availability: Out of Stock
Item #: 32251 -

NOS upper moulding at the top of the windshield on the left hand side. Ford part number C5ZZ-6503145-B

Price: $10.67

Buy Details

Availability: Out of Stock
Item #: 12644 -

Driver side vertical windshield moulding. Suitable for restoration or could fit right in on your lower quality daily driver. Ford part number C5ZZ-6503137-B.

Price: $59.27

Buy Details

Availability: Out of Stock
Item #: 12810 -

Core lower windshield moulding / trim for your Mercury Cougar or Ford Mustang. Suitable for restoration or could fit right in on your lower quality daily driver. Ford part # C5ZZ-6503148-B.

Price: $10.67

Buy Details

Availability: Out of Stock
Item #: 12654 -

Core passenger side (right hand) upper windshield moulding / trim for your Mercury Cougar or Ford Mustang. Suitable for restoration or could fit right in on your lower quality daily driver. Ford part # C5ZZ-6503144-B.

Price: $10.67

Buy Details

Availability: Out of Stock
Item #: 12651 -

Core passenger side (right hand) vertical windshield moulding / trim for your Mercury Cougar or Ford Mustang. Suitable for restoration or could fit right in on your lower quality daily driver. Ford part # C5ZZ-6503136-B.

Price: $125.87

Buy Details

Availability: Out of Stock
Item #: 32252 -

NOS passenger side (right hand) vertical windshield moulding / trim for your Mercury Cougar or Ford Mustang. Ford part # C5ZZ-6503136-B.

Price: $73.67

Buy Details

Availability: Out of Stock
Item #: 32004 -

NOTE: This listing is for a pair of blemished mouldings, please see the above photos for examples of blemmed pieces. This is the right hand and left hand 1/4 panel moulding. Some refer to these as "Hockey Sticks" or "J" mouldings. They mount at the base of the rear side windows and almost always needs to be replaced due to pitting or holes having been drilled in them to fasten these in place. Included with the moulding is super strength 3M double sided, trim tape. Original Mercury part number...

Price: $765.86

Buy Details

Availability: Out of Stock
Item #: 20294 -

NOS anodized aluminum rear moulding / trim set for the Mercury Cougar. Rare find in NOS form and all three trim parts come with original packaging.Ford part #'s: Driver side rear quarter extension trim C7WY-6529313-A, passenger side C7WY-6529314-A, and center trim C7WY-6542512-A Normal 0 false false false EN-US X-NONE X-NONE . ...

Price: $219.87

Buy Details

Availability: Out of Stock
Item #: 19128 -

Used anodized aluminum three piece rear moulding / trim set for the Mercury Cougar. Used driver quality set with no obvious dings or deep scratches. Better than our core sets in that they have more luster and less damage. Keep in mind these are off a 40 year old parts car.Ford part #'s: Driver side rear quarter extension trim C7WY-6529313-A, passenger side C7WY-6529314-A, and center trim C7WY-6542512-A. *NOTE* Keep in mind we buy most trim and mouldings found on a Cougar. For more insight on...

Price: $150.17

Buy Details

Availability: Out of Stock
Item #: 15790 -

Core four piece rear window moulding / trim set for your Mercury Cougar. These stainless steel mouldings will have light scratches and minor dings and are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part #'s: Driver side upper C7WY-42431-A, driver side lower C7WY-42405-A, passenger side upper C7WY-42430-A, passenger side lower C7WY-42404-A.*NOTE* Keep in mind we buy most...

Price: $188.87

Buy Details

Availability: Out of Stock
Item #: 15342 -

Used four piece rear window moulding / trim set for your Mercury Cougar. Good used four piece set with no dings or heavy scratches. Ready to install on your Cougar as is or polish them to a mirror like finish to be installed on a show car. These are above average original FoMoCo mouldings and are ready to install as-is. No disappointments. This is the same part for 1969-70 as well, however those pieces carry a part number starting in C9WY. Ford part #'s: Driver side upper C7WY-42431-A, driver...

MSRP:$136.00
Price: $80.00

Buy Details

Availability: Out of Stock
Item #: 20156 -

NOTE: Some modification required to fit Cougars! These are actually 1971-73 Mustang wheel lip mouldings, which have a much different shape / contour than Cougar and will need minor modifications to make fit. That being said, they are the closest alternative we have found that can be made to fit and look reasonably good for much less than restored originals or NOS. This set is what we refer to as the "Better than nothing" option. No complaining or whining please... Check out our video below,...

Price: $593.87

Buy Details

Availability: Out of Stock
Item #: 12672 -

This set of four 1967 - 1968 wheel lip mouldings are sold on an exchange basis. If you have extra cores you would like to send in for credit then we would like to hear from you! Please do not send heavily damaged, torn, corroded or kinked trim as the finished product will be delicately thin or not able to be restored at all. Extra screw holes and elongated holes are OK but you will be getting a like product in exchange. We are happy to send your specific cores in for restoration and make sure...

Price: $65.57

Buy Details

Availability: Out of Stock
Item #: 12667 -

This is a core five piece set of front windshield mouldings for a 1967 - 1968 Mercury Cougar. These mouldings need restoration as they are dull, scratched and dinged. They would suffice to make a car complete if you were wanting to drive it but in our opinion they are a step below "good" driver quality. This set will not have any kinks, flattened out areas or holes, we discard mouldings of that description. We do not recommend the reproduction, "offshore" mouldings that are available as they...

Price: $121.86

Buy Details

Availability: Out of Stock
Item #: 20295 -

This "offshore" set of low quality reproduction windshield mouldings / trim are sold only as a set. You will not want to mix and match these reproduction units with used because the color and quality will not match. These are guaranteed to look bad and fit even worse. No returns, no exchanges. We strongly suggest that you purchase our restored or good used set. And yes, these are the exact same trim parts supplied by the other vendors with a completely different description. Check out our...

Price: $112.75

Buy Details

Availability: Out of Stock
Item #: 13875 -

This is a much higher quality bracket than other reproductions. Correct texture and fit. The bracket offered by most companies is just pot metal sprayed gray. Replaces Ford Part #: C7SZ-3A732-B or C7ZZ-3A732-B.

Price: $46.85

Buy Details

Availability: Out of Stock, On Order
Item #: 41897 -

These Brackets are made from stamped steel just like the original, and built to Ford specifications for an exact fit. Available in correct OEM Black. customers looking for a little more flash under the hood might be interested in the highly-polished stainless steel version of this bracket! Replaces Ford Part #: C7ZZ-8A193-A. Check out our video on Radiator and Fan upgrades below: ...

Price: $11.05

Buy Details

Availability: Out of Stock, On Order
Item #: 13801 -

Good reproduction but our used unit is a better value and will clean up just as nice.

Price: $47.70

Buy Details

Availability: Out of Stock, On Order
Item #: 11330 -

Reproduction support brace to be used with 1967-70 Mercury Cougar and Ford Mustang export braces. Can be used with OEM, NOS or reproduction export braces. Contoured to match the curvature of the cowl.*Note - Will not fit early Shelby Mustangs.This part never came from the factory, but the idea was taken from the fact that Shelby cars had plates like these, though these are not interchangeable with Shelby export braces or export brace plates because of hole placement. The original Shelby part...

Price: $40.86

Buy Details

Availability: Out of Stock
Item #: 21614 -

Spare tire, with styled steel wheel hold down disc. Fits all 1968-70 Mercury Cougar and Ford Mustang.  About 3 inches in diameter, this is the specified trunk hold down plate for the use with the factory mag wheels. We won't always have the used in stock, but the reproduction version is very good.Replaces Ford part number C8MY-1424-A.

Price: $17.87

Buy Details

Availability: Out of Stock
Item #: 32167 -

These spacers are required to properly mount the trunk lock housing to the trunk. Two required per car, sold individually. Ford part number C7WY-6543565-A. Check out our video below showing how to easily remove and reinstall your 67-68 trunk latch, lock, and cover plate, and some info on getting a new key made. ...

Price: $399.87

Buy Details

Availability: Out of Stock
Item #: 30530 -

Used Nodular Iron 9 inch third member case, known as "N" - Case. typically found on cars with 427-4V, 428CJ, 429CJ, Boss 302, Boss 351, or Boss 429. These are the factory installed heavy duty third members typically with 31 splined axles. These are bare cases as shown. Current dates available: 8L27, November 27, 1968; 0E29, May 29, 1970. Please have your desired date in mind when calling or place it in the comments section of your on-line order. We have removed the peg leg gears and parts...

Price: $0.32

Buy Details

Availability: Out of Stock
Item #: 22988 -

Used stamped nut for attaching the tail light bezels to the tail light housings. This is a 8-32 nut, with a 11/32" hex and is intended for the 8-32 threaded studs attached to the tail light bezels on any 1967-68 Mercury Cougar. Sold individually, 10 per side, or 20 per car.Replaces Ford part number 45203-S.

Price: $20.88

Buy Details

Availability: Out of Stock
Item #: 23931 -

Application is for the FE engines 390, 427 428. This assembly is needed for the installation of the cylinder head air supply tubes. Sold as one nut / one ferrule. 8 total needed for smog tube attaching. Originally these were installed in conjunction with a lower tube.

Price: $29.88

Buy Details

Availability: Out of Stock
Item #: 31973 -

Used 1970-72 black AUTOLITE marked oil fill cap with black plastic elbow. Several variations noted from our collection, AUTOLITE and MOTORCRAFT versions. Will need detailing or fresh black paint applied. Would also suggest replacing the rubber grommet. These 50 year old rubber grommets are rock hard and likely leak air. Gasket to valve cover will also need replacement. Even though this cap has a 1971 parts number, we see these on the 1970 351C engines quite often. Replaces Ford part...

Price: $49.25

Buy Details

Availability: Out of Stock, On Order
Item #: 31378 -

Concours correct dipsticks for 1967 - 1969 big block engines. These are exact reproductions of the originals with the proper length and oil level for these big block FE's. They have all of the correct markings including the Ford part number and recommended oil weight. Each dipstick is finished with a show quality chrome handle capped with the correct plastic plug. Ford part # C7OZ-6750-A, Ford casting # C7OE-6750-A.

Price: $113.27

Buy Details

Availability: Out of Stock
Item #: 32168 -

New Old Stock oil filter adapter from any 1968-70 Ford with 390 or 428CJ (non SCJ). Fits Cougar, Mustang, Torino, Fairlane, Cyclone, Ranchero, etc. Nice cast aluminum bracket for installing the spin on oil filter and oil pressure sending unit. Ford casting number C8AE-6881-A. Will fit 1967 FE engine blocks too. Those technically used an adapter with a casting number of C0AE-6881-A.

MSRP:$160.00
Price: $114.25

Buy Details

Availability: Out of Stock, On Order
Item #: 26023 -

Famous 'Cal Custom' aluminum finned oil pan that was so popular throughout the 60's, 70's and 80's. It has not been available for years, but it is back again. Pan is made from all new pressure die cast tooling and then fully machined to offer a precise fit and leak free installation. These look great in combination with the Finned Air Cleaner and Valve Covers. Replaces Ford Part #: C5ZZ-6675.

Price: $30.00

Buy Details

Availability: Out of Stock
Item #: 33552 -

Used oil screen pick up tube assembly from a FE or big  block 1966-70 Ford car, such as 352, 390, 410, 428, or 428CJ engine. This is for most front sump oil pans. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes. Melling sells a quality reproduction of this item. Replaces Ford Part #: C6OZ-6622-A ...

Price: $45.55

Buy Details

Availability: Out of Stock
Item #: 42392 -

Full passenger (right hand) side front frame rail that measures 52" long and the outer rail has weld nuts installed for proper installation. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

Price: $13.65

Buy Details

Availability: Out of Stock, On Order
Item #: 15791 -

Reproduction Owners Manual for the 1968 Mercury Cougar

Price: $38.05

Buy Details

Availability: Out of Stock, On Order
Item #: 12102 -

Reproduction cover board for the rear package tray found on the 1968 Mercury Cougar behind the rear seat, visible through the rear window. The 1968 tray is not as deep as the 67 as it installs under the tops of the rear side panels. In 1967 they installed over the rear vinyl covered panels. The difference between the WCCC panels and the others on the market is that we run them through a drum sander so as to give the textured side a more muted look and feel than unsanded masonite board. The...

Price: $52.88

Buy Details

Availability: Out of Stock
Item #: 19271 -

Good used piece of insulation / sound deadener that is distinctly different from 1967. This pad weighs more than four times what the reproduction does and will much more effectively insulate the passenger compartment of your Cougar from sound, heat and cold. Notice it comes with the factory perforations for speakers and rear window defog unit.

Price: $18.35

Buy Details

Availability: Out of Stock
Item #: 25964 -

WE CAN NOT SHIP THIS PRODUCT INTERNATIONALLY WITHOUT SHIPPING IT AS HAZARDOUS MATERIAL. THIS WILL INCUR HAZARDOUS MATERIAL CHARGES VIA UPS AND SOME COUNTRIES DO NOT ACCEPT IMPORTING THIS PRODUCT. This SEM plastic and leather paint prep is for cleaning surfaces before applying the SEM flexible vinyl paint. Removes mold, grease, oil and other contaminates from leather, carpet, velour and vinyl.

Price: $11.15

Buy Details

Availability: Out of Stock, On Order
Item #: 12455 -

New pair of white and yellow paint sticks for the Mercury or Ford. These units were used by FORD at the assembly plants to mark fender aprons, radiator support, transmission, rear end housing, sheet metal, glass and variety of other parts. It's often little details like this that separate first and second place at the show.

Price: $38.25

Buy Details

Availability: Out of Stock
Item #: 41636 -

Will require trimming to fit your year application. Note that 1967 has the three raised enforcements facing the inside of the trunk and 1969-73 the raised portions face outward. Thus you will want this panel for the passengers side of those series. ...

Price: $38.25

Buy Details

Availability: Out of Stock, On Order
Item #: 41637 -

Will require trimming to fit your year application. Note that 1967 has the three raised enforcements facing the inside of the trunk and 1969-73 the raised portions face outward, Thus you will want this panel for the drivers side of those series. 

Price: $293.27

Buy Details

Availability: Out of Stock
Item #: 19130 -

Here is our used lower rear window channel which we will cut to suit your needs. Quite often vinyl tops will cause rust in this area and this part is cut from a rust free Western parts car. If you need the package tray attached there is no extra charge, but shipping costs will increase. We usually cut generous into the quarters and several inches up the sides of the rear glass. If you only need one side contact us as we can help.   ...