Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 5425-5472 of 5477
$0 Price: $266.85

Buy Details

Availability: Out of Stock
Item #: 11209 -

Good used, rust free valance with provisions for rear bumper guards. Getting to be hard to find without excessive filler. We have a local body man take out the small dents and he does not load them up with Bondo. He removes the filler and works the dent out properly. If you have the optional rear bumper guards then you will want a valance like the one pictured that has the factory holes for them. These are not paint ready, flawless parts but rather 40 years old, taken from a parts car. We do...

$0 Price: $69.89

Buy Details

Availability: Out of Stock
Item #: 15994 -

Decent used, rust free valance that will need substantial work. Getting to be hard to find without excessive filler. These are not paint ready, flawless parts but rather 40 years old, taken from a parts car that will have small dents, creases and often some amount of filler. We do have NOS and on occasion we get in a flawless used example.Ford part # C7WY-6540544-A.

$0 Price: $69.89

Buy Details

Availability: Out of Stock
Item #: 24409 -

C8OE-C-SR WCCC Carter service replacement anti backfire valve, but without the outer cover having the concours correct stampings.These units are used, not tested and one should assume they are non-functional.

$0 Price: $67.45

Buy Details

Availability: Out of Stock, Discontinued
Item #: 13999 -

This valve is used on Mercury Cougars and Ford Mustangs equipped with factory A/C to stop the flow of warm coolant when A/C is on.This valve is functionally the same as the OEM, but has obvious cosmetic differences from the factory valve.Replaces Ford Part #: C7ZZ-18495-A.

$0 Price: $135.86

Buy Details

Availability: Out of Stock
Item #: 11-0327 -

Vacuum tested working hot water valve for Mercury Cougars and Ford Mustangs equipped with factory A/C. This valve stops the flow of warm coolant when the A/C is on and has the original cast brass valve with bracket and vacuum pod. We are unable to guarantee that the water seal is good. Ford part # C7ZZ-18495-A, casting number on vacuum valve C7ZA-18C310-A.

$0 Price: $195.00

Buy Details

Availability: Out of Stock
Item #: 33289 -

Core C-4 Transmission valve body for any 1967-68 Mercury Cougar or 1967-69 Ford Mustang with code "W" transmission code on the door tag. This is only for 1967 through 1969 transmissions with P-R-N-D-2-1 shift pattern. Also known as the 8 bolt valve body. Sold as a core, should be thoroughly cleaned and rebuilt with quality parts. These units can be upgraded with 'shift kits' to firm up shifts, add longevity, and they help reduce and eliminate clutch and band slippage. Various kits available in...

$0 Price: $220.00

Buy Details

Availability: Out of Stock
Item #: 33290 -

Core C-4 Transmission valve body for any 1968 Mercury Cougar or 1968 Ford Mustang with code "W" transmission code on the door tag. This is only for 1968 transmissions with P-R-N-D-2-1 shift pattern. Also known as the 8 bolt valve body. Sold as a core, should be thoroughly cleaned and rebuilt with quality parts. These units can be upgraded with 'shift kits' to firm up shifts, add longevity, and they help reduce and eliminate clutch and band slippage. Various kits available in the aftermarket,...

$0 Price: $275.85

Buy Details

Availability: Out of Stock
Item #: 24500 -

C8WY-6582-C  Pair of Cast aluminum running cat valve covers for 1968-70 Mercury Cougar or XR7-G with X code 390-2V , S code 390-4V, or R code 428CJ engines. Original valve cover, FE running cat valve covers were not side specific. One cat will face forward and one will face backwards on your Cougar. These are die cast aluminum not sand cast. Also note that these are tall pent roof valve covers, you will need the special double extended air cleaner snorkel if using these valve...

$0 Price: $629.49

Buy Details

Availability: Out of Stock
Item #: 30512 -

Reproduction set of after market cast aluminum valve covers with COBRA 428 lettering. Fits any FE style Ford engine, including 390, and 428 cubic inches.

$0 Price: $1,800.00

Buy Details

Availability: Out of Stock
Item #: 18963 -

Here is a pair of cast aluminum running cat valve covers for the 1968 Mercury Cougar XR7-G with the F code 302-2V or J code 302-4V engine. Original valve sand cast covers, not a reproduction. Originally cast by Shelby American Inc.Ford part # C8WY-6582-B, Shelby American part number S7WE-6582-B.

$0 Price: $53.85

Buy Details

Availability: Out of Stock
Item #: 32772 -

New old stock driver side vent window handle for any 1968 Mercury Cougar or Ford Mustang.  Drive pins and washers included.Ford part number C8OZ-5422917-B

$0 Price: $12.87

Buy Details

Availability: Out of Stock
Item #: 31253 -

Good used axle vent nipple or tube. This vent tube screws into the top of the rear axle and is a breather / vent to equalize the pressure inside the axle tube. Fits both 8 inch and 9 inch rear axles. Fits Mercury Cougar and Ford Mustang 1967-73.  A (5/16" inside diameter) rubber hose about 18-1/4 inches long attaches to the nipple. Has a very tiny diameter hole inside, about 0.062". Needs to be kept clear to work properly. Also see the reproduction version from AMK. Concours hose kit with...

$0 Price: $894.87

Buy Details

Availability: Out of Stock
Item #: 31796 -

This kit includes 2 vent frames, 2 quarter window frames and all four stainless parts that complete the frames. By purchasing this as a kit you are getting the stainless parts for almost free. Keep in mind, those who send in high quality cores in advance of making their order get the advantage of core matching. If you send in cores in advance with minimal pitting we hand select your parts to give you our best. If you do not send your cores in advance we select your parts randomly. If you are...

$0 Price: $165.87

Buy Details

Availability: Out of Stock
Item #: 15719 -

Used grade "A" driver side (left hand) vent window frame as it comes out of the door and is just the bare window frame. This is not a perfect part but it will look good on a low mile car that shows a little patina. The weatherstrip track that continues down into the door can be had with this part for no extra charge, please mention it in the comments section when you order online. Ford part # C7ZZ-6522205-A. Casting # C7ZB-6522223-A Check out our video below for helpful tips on disassembling...

$0 Price: $90.77

Buy Details

Availability: Out of Stock
Item #: 11-0503 -

Used grade A stainless steel vent window glass frame for the left side or driver side door on a 68 Mercury Cougar or Ford Mustang. Similar frame as the 1967

$0 Price: $43.85

Buy Details

Availability: Out of Stock
Item #: 32731 -

New old stock instrument panel voltage regulator or IVR for all 1967-68 Mercury Cougar and Ford Mustang. Additionally fits 1967-68 Ford full size, 1966-68 Torino,CycloneMounts to the rear of the instrument clusters, voltage regulator for dash gauges power.  Ford part number C6DZ-10804-A. Check out the video below on our new gauge tester: ...

$0 Price: $18.99

Buy Details

Availability: Out of Stock
Item #: 15-0169 -

This is a plastic cushion, washer and/or spring between the lower knuckle and inner tube on a 1968 - 1973 tilt-away steering column. These have a larger diameter than the 1967 plastic cushion.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

$0 Price: $195.00

Buy Details

Availability: Out of Stock
Item #: 31027 -

Small block Ford water pump core, suitable for rebuilding. This version has a casting number of C6OE-A. Found on many Ford 289 engines from 1966-67. These do not have casting dates, and plan on sending it to a vendor that specializes in water pump rebuilding. In all likelihood, the rear cover, heater tubes, and impeller will need replacing. Occasionally they have the original non-HiPo cast iron impeller, but not always. See our other core water pump listings for other casting...

$0 Price: $79.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32940 -

Dated 7G3, July 3, 1967. Big block Ford water pump core, suitable for rebuilding. This version has a casting number of C8AE-8505-H. Found on many Ford 390, 427, and 428CJ engines from 1968. These have casting dates, we list the dates when we have them in stock. Plan on sending it to a vendor that specializes in water pump rebuilding. In all likelihood, the rear cover, heater tube, and impeller will need replacing. See our other core water pump listings for other casting numbers....

$0 Price: $79.27

Buy Details

Availability: Out of Stock
Item #: 31034 -

Dated 7M9, December 9, 1967. Big block Ford water pump core, suitable for rebuilding. This version has a casting number of C8AE-8505-H. Found on many Ford 390, 427, and 428CJ engines from 1968. These have casting dates, we list the dates when we have them in stock. Plan on sending it to a vendor that specializes in water pump rebuilding. In all likelihood, the rear cover, heater tube, and impeller will need replacing. See our other core water pump listings for other casting...

$0 Price: $79.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32939 -

Dated 8F4, June 4, 1968. Big block Ford water pump core, suitable for rebuilding. This version has a casting number of C8AE-8505-H. Found on many Ford 390, 427, and 428CJ engines from 1968. These have casting dates, we list the dates when we have them in stock. Plan on sending it to a vendor that specializes in water pump rebuilding. In all likelihood, the rear cover, heater tube, and impeller will need replacing. See our other core water pump listings for other casting numbers....

$0 Price: $46.85

Buy Details

Availability: Out of Stock, On Order
Item #: 31586 -

Used on the optional 68 Mercury Cougar styled steel wheel in the 14x6" size as well as the 1969 Eliminator, 68-69 Torino and Mustang. Master Parts Catalog description: 15-3/8" O.D., 12" I.D, 2" wide, brushed finish. These are easy to identify from the 1967 or 1969 - 1970 as they are the only ring with a brushed finish used on the SS wheels 1967-1970. WCCC is the only retailer offering these at present. Sold individually. Replaces Ford part number C8ZZ-1210-A. ...

$0 Price: $205.88

Buy Details

Availability: Out of Stock
Item #: 13006 -

Used on the optional 1968 Mercury Cougar styled steel wheel in the 14x6" size as well as the 1968 Torino and Mustang. Also used on the 1969 Eliminator 12 hole wheel so as to match the brushed center cap. Master Parts Catalog description: 15-3/8" O.D., 12" I.D, 2" wide, brushed finish, sold individually. These are easy to identify from the 1967 or 1969 - 1970 as they are the only ring with a brushed finish used on the SS wheels 1967-1970. These are getting very hard to come by, and most...

$0 Price: $2,100.02

Buy Details

Availability: Out of Stock
Item #: 16216 -

This set of four wheels is not correct for a xr7G Cougar as they are 15" and the originals were 14". You may find that more tire options are available for a 15" tire. These wheels have been tested and have found to be true. The Rader wheels were recalled by Ford, shortly after the first XR7-G cars were produced. Your Mercury dealer would have installed the common 1968 Cougar style steel wheels as replacements.

$0 Price: $5,000.04

Buy Details

Availability: Out of Stock
Item #: 19002 -

Original Rader Wheels as installed on 1968 Mercury XR7-G special edition cars. These are the wheels that were intended and the ones shown in the brochure, posters, and magazine publications. These are the cast and chromed lace designed wheels made by Rader. Set of 5 used 14 x 6 wheels, 4 are in nice condition, the 5th has some chrome plating issues. Included are the caps and cones, which were copied from an original. We are also offering 20 lug nuts, and 20 newly machined lug...

$150.00 Price: $175.95

Buy Details

Availability: Out of Stock
Item #: 15014 -

This product has received the 'Crappy Product' certificate. Items that receive the 'Crappy Product' certificate are products that we carry for comparison purposes as they are often the version offered by other vendors or because it is the only version available. We would not be willing to use these parts on our own cars, and we do not recommend purchasing these parts. WE ARE NOT ABLE TO ACCEPT RETURNS FOR THESE PARTS. Economy replacement vinyl top that looks great and fits perfect. This...

$0 Price: $17.06

Buy Details

Availability: Out of Stock
Item #: 30937 -

Reproduction Concours weave black headliner windlace for the driver or passenger side of the Mercury Cougar or Ford Mustang. This unit helps hold the sides of the headliner in place and covers the pinch weld; it is also known as the pinch weld moulding. This is an individual piece and is 7 feet of windlace. You will have to trim this piece to fit and it should be around 6ft each when correctly trimmed. This windlace is correct for 1967-70, however the 1967-68 Cougar with the décor group...

$0 Price: $5.85

Buy Details

Availability: Out of Stock
Item #: 30938 -

Reproduction concours weave black rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed. *NOTE* There are two types of this trim found in the 1967-68, the smooth or rough textured version like the one shown...

$0 Price: $17.06

Buy Details

Availability: Out of Stock
Item #: 11960 -

Reproduction dark red headliner windlace for the driver or passenger side of the Mercury Cougar or Ford Mustang. This unit helps hold the sides of the headliner in place and covers the pinch weld; it is also known as the pinch weld moulding. This is an individual piece and is 7 feet of windlace. You will have to trim this piece to fit and it should be around 6ft each when correctly trimmed. This windlace is correct for 1967-70, however the 1967-68 Cougar with the décor group option used a...

$0 Price: $17.06

Buy Details

Availability: Out of Stock
Item #: 11968 -

Reproduction white headliner windlace for the driver or passenger side of the Mercury Cougar or Ford Mustang. This unit helps hold the sides of the headliner in place and covers the pinch weld; it is also known as the pinch weld moulding. This is an individual piece and is 7 feet of windlace. You will have to trim this piece to fit and it should be around 6ft each when correctly trimmed. This windlace is correct for 1967-70, however the 1967-68 Cougar with the décor group option used a wider...

$0 Price: $35.85

Buy Details

Availability: Out of Stock
Item #: 25744 -

NOS window crank knob, color is Aqua Blue, 1968 and 1969 only color. Fits 1968-69 Mercury Cougar and 1968 Ford Mustang and other Fords. Ford part number C8SZ-6523352-A1K.

$0 Price: $8.00

Buy Details

Availability: Out of Stock
Item #: 13898 -

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Does not look or feel much like the original. Not really a stock color, fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the...

$0 Price: $27.86

Buy Details

Availability: Out of Stock
Item #: 10851 -

This is a good used fitting with large and small nipples for use with the foot actuated washer pumps found on 1967-68 Mercury Cougar and Ford Mustang. Good used part that we verify the check valve is working. These screw into of the rubber covered pumps.

$0 Price: $14.85

Buy Details

Availability: Out of Stock
Item #: 30851 -

We shatter the castings from used back-up light assemblies to remove the socket and pigtail complete. This is for the person who has a nice original back up light and is willing to invest the time to repair a damaged pigtail. This light was also used on the 1965-1966 Ford Mustang.

$0 Price: $193.86

Buy Details

Availability: Out of Stock
Item #: 15-0067 -

Used wiring cover for the tilt / tilt away steering column found in the Mercury Cougar or Ford Mustang. Unique to the 1968 and 1969 tilt column, fixed column version will not fit on a tilt without modification. Ford part number C8ZZ-13376-A or C8ZZ-13376-B.

$0 Price: $62.85

Buy Details

Availability: Out of Stock, On Order
Item #: 11212 -

Wiring harness for the low fuel sending units on 1968 Mercury Cougar XR7 and standard models with low fuel warning light. The Safety Convenience Option included a low fuel warning light. This harness has two wires which attach to the three prongs on the 1968 C8ZF-9275-B low fuel sending units.1967 and 1968 will interchange, 1967 has a plastic shielding on the end of the wire loom that is under the car. 1968 version does not have this shielding. Ford part number is C8WB-14406-A or C8WY-14406-A....

$0 Price: $69.89

Buy Details

Availability: Out of Stock
Item #: 27339 -

Factory used and tested under dash wiring harness for all 1968 - 70 Mercury Cougar and Ford Mustang cars with factory AM/FM or AM 8 Track stereo radios. This harness plugs into the speaker plug of the radio, and connects the kick panel speakers in a 1967-68 Mercury Cougar or to the A pillar post where it connects to the door wiring harness that has the speaker plug for the door mounted speakers in 1969-70 cars. White speaker wire goes to the passenger side speaker, and the orange colored wire...

$0 Price: $19.89

Buy Details

Availability: Out of Stock, On Order
Item #: 27283 -

Power wire that connects the PRNDL or shift indicator illumination lamp assembly, and the main under dash wiring harness on all standard 1968 Cougars and Mustangs. All electrical harnesses are inspected, professionally repaired (when needed), tested, and ready to install. Harness marked C8ZZ-15A808-A. Has red colored bullet plug to main harness, and blue plug to PRNDL wiring. Fits 68 CougarFits 68 Mustang

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 31971 -

Used pigtail for the 1968 ignition switch.

$0 Price: $22.86

Buy Details

Availability: Out of Stock
Item #: 27342 -

This pigtail is for 68 - 70 cars, but will work on 1967 cars with 8 track radio. Original used under dash speaker wiring harness pigtail for all 1967-70 Mercury Cougar and Ford Mustang cars with factory AM/FM or AM 8 Track stereo radios. This speaker wiring harness pigtail plug end goes to the your passenger side speaker, which is denoted by the white wire.Part of the stereo speaker wiring harness that goes to a pair of factory speakers in the kick panels in a 1967-68 Mercury Cougar or to the...

$0 Price: $8.50

Buy Details

Availability: Out of Stock
Item #: 32826 -

Used wiring pigtail that runs from the under hood harness to the starter solenoid (battery side post) on the 67 - 68 Standard and XR7 model Cougars.

$0 Price: $199.85

Buy Details

Availability: Rare / NOS Part
Item #: 32860 -

New old stock manual steering worm gear for any 1967-70 Mercury Cougar or Ford Mustang with manual steering or 19:1 steering gear box. Factory new worm gear assembly for rebuilding your steering gear box. NOS in the box Ford part number C7ZZ-3524-C. Check out this video