Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3025-3072 of 5492
Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19245 -

Used grade B radio pad for the center console of the Mercury Cougar or Ford Mustang. This unit will be discolored from years of exposure to the sun and will be considered a driver quality at best. We rarely can provide the color you need due to the very limited supply we have. These pads always are separating from the metal backing to some degree. Other versions of Grade B might be cut for aftermarket radios. See pictures for some examples. Contact us to see if we have a pad that fits your...

Price: $260.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19199 -

Upper console radio pad for the 1967 - 1968 Cougar XR7 with no cracks or burns. This is a grade "A" pad, so it will be in excellent condition with no or minimal shrinkage, separation, good color and no modifications or cuts. When you place your order mention in the order 'comments' what color you prefer and we will attempt to accommodate. We cannot guarantee that we can give your requested color, so plan on repainting this item. Even if we can provide your color, there is always some...

Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22546 -

This is going to be a grade "B" pad, so expect it to show signs of warping and de-laminating. It will most likely be sun damaged, and the holes around the radio knobs may be elongated. We cannot guarantee that we can give you the color you select, so plan on repainting this item. Even if we can provide your color, there is always some discoloration from age and use.

Price: $32.85

Buy Details

Availability: Rare / NOS Part
Item #: 18938 -

These anti static devices were installed under the front bearing dust caps on cars equipped with factory installed AM-FM radios. The part pictured is NOS, the one we currently have in stock is used. Sold individually.

Price: $31.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23935 -

C6OA-18832-A is the number stamped into the end of the Autolite capacitor. Attaches to one of the lugs on the voltage regulator, bullet lead plugs into wiring harness. Sometimes called a radio ignition interference suppressor. About 1-15/16" inches long. This is one of those small detail items that judges like. Application all Ford and Mercury vehicles from 1966-1971 used this "Autolite" marked capacitor when a radio was installed by the factory.. Starting in 1972 there is a Motorcraft version...

Price: $29.15

Buy Details

Availability: In-Stock Item
Item #: 10121 -

Reproduction rag joint for the fixed steering column in the Mercury Cougar or Ford Mustang. This assembly is for the fixed column only and will not work for the tilt / tilt away steering column. Our reproduction rag joint comes assembled with the lower splined casting. 

Price: $38.75

Buy Details

Availability: Out of Stock
Item #: 14252 -

This polyurethane steering coupler repair kit for your tilt column, commonly referred to as a "rag joint", connects the steering shaft to the input shaft on the steering box. Some customers feel polyurethane improves steering feel. Replaces factory steering coupler on 1967 - 1973 cars. Most 1967 Mustangs with fixed steering columns do not have coupler.Replaces Ford Part #: C7OZ-3A525 Having issues with wobbly or loose steering? Check out our video on sloppy steering below. ...

Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 31875 -

Reproduction steering column to steering box coupler, also known as a 'rag' joint. Used on 1967 - 1970 Cougar tilt columns, differs greatly from the fixed column version in that is has a "D" shaped fitting on the column side. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...

Price: $25.00

Buy Details

Availability: In-Stock Item
Item #: 26227 -

Good fit, includes all hardware shown. We've found that when using our reproduction drop down bracket (for those with headers), the bushings in this kit will rip and tear through the oversized hole, so you can also purchase the pair of the premium polyurethane bushings and the issue will go away. Otherwise you can go with our premium version boot kit of you need internal parts for the cylinder. Replaces Ford Part #: C6OZ-3C651-A ...

Price: $65.00

Buy Details

Availability: Rare / NOS Part
Item #: 32857 -

New old stock power steering ram cylinder boot and bushings. Fits all 1967-70 Mercury Cougar and Ford Mustang. Replaces Ford Part #: C6OZ-3C651-A.

Price: $25.00

Buy Details

Availability: Out of Stock
Item #: 33224 -

New old stock power steering ram cylinder boot, rubber boot only. Fits all 1967-70 Mercury Cougar and Ford Mustang. Replaces Ford Part #: C3AZ-3C651-A.

Price: $154.55

Buy Details

Availability: In-Stock Item
Item #: 41992 -

This new reproduction power steering ram cylinder is good quality with almost no warranty claims. However, When you go to put your cotter pin in the castle nut you will often find it does not align perfectly which means you may have to drill it for a perfect fit. Keep in mind we will pay $30 in in-store credit for a clean original used ram cylinder so don't throw them away! RAM BOOT SOLD SEPARATELY. Replaces Ford Part #: C3DZ-3A540-A or C7ZZ-3A540-A. ...

Price: $137.88

Buy Details

Availability: In-Stock Item
Item #: 25932 -

This an original, rebuilt power steering slave / ram cylinder. It has not had a cosmetic restoration so it will show external dings, scrapes and general wear associated with a 50 year old part located on the bottom of a car. If you buy our reproduction ram do not throw away your core used ram as we often can give in store credit for the part. RAM DUST BOOT SOLD SEPARATELY.Replaces Ford Part #: C7ZZ-3A540-A.

Price: $69.15

Buy Details

Availability: In-Stock Item
Item #: 32324 -

Quality complete rebuild kit, includes all hardware shown. Premium flexible rubber boot that has vent holes, boot for elbow, and all hardware designated by an experienced rebuilder for completeness. This is the best known kit on the market.

Price: $41.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32081 -

Passenger side chassis bumper bracket for the rear axle. Passenger side as removed from a 1967-73 Mercury Cougar. Good condition bracket, road tested, but not salt road tested. Ships as shown, cut with generous margins around the original bracket.

Price: $41.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32080 -

Driver side chassis bumper bracket for the rear axle. Passenger side as removed from a 1967-73 Mercury Cougar. Good condition bracket, road tested, but not salt road tested. Ships as shown, cut with generous margins around the original bracket.

Price: $7.15

Buy Details

Availability: In-Stock Item
Item #: 26596 -

Reproduction rear axle outer bumper for the Mercury Cougar or Ford Mustang. These units mount on frame rail, are push in and two are required per car. Sold as a pair. Replaces Ford part # C6AZ-4730.

Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24182 -

This 3 degree wedge properly sets the pinion angle for the drive shaft. This is a Cougar specific part which is needed due to the longer than normal rear leaf spring length. There are other wedges, but we seldom see them. This 3 degree marked wedge is the most prolific one. Feel secure in using these as a replacement.  Sold individually, two required per vehicle. Orientation: Narrow end towards the front of the car.

Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24205 -

These are bolted to the rear frame rails and were used to tie the car down to the transporter for the journey from the factory to the dealer. The dealer was supposed to remove them and return them for a credit as instructed by the dealer. Notice the sticker on the rear license plate frame (decal is available in the decal section)? Many sets slipped through as the dealers often forgot or did not deem the small credit back worth their effort to remove. These are great for transporting your car...

Price: $28.89

Buy Details

Availability: In-Stock Item
Item #: 41109 -

Reproduction Rear Bumper Guard Bolts & U Nuts for the 1968 Mercury Cougar 

Price: $608.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11261 -

For deck / trunk lids it is all about rust under the inner rear lip... We still check it over good for excessive filler, correct contour on all the lines and hidden rust under the weather strip. We ship deck / trunk lids with several layers of thick cardboard and insure them for the full amount. Keep in mind shipping is free if you order at the same time as a hood, door or quarter panel. For those wanting a cleaner look on their 1967-68 Cougar a 69-70 deck / trunk lid will bolt right on with...

Price: $185.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14524 -

Late 1968 Mercury Cougar trunk lid, identified by having the large square hole for installing the trunk lock and latch parts. This style is hard to keep in stock, please see the 1967-68 version in the related section. Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that...

Price: $185.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14523 -

Most often the problem with our Grade "B" deck / trunk lids is rust under the lip. We do not sell "rotted out" deck / trunk lids. Like the deck / trunk lid shown here you will be able to sand blast it and treat the rust so as to prevent it from spreading. We almost guarantee that at least "some" pin holes will appear after you have blasted the underside. Make sure to click onto our "after" shot to see what you should expect to see after you have bead blasted the underside of one of our "B"...

Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 17764 -

Used trunk or luggage compartment latch, fits all 1967-73 Mercury Cougar and many other Ford and Mercury cars. Comes with 3 bolts for mounting.Replaces Ford part number C5AZ-6243200-A.

Price: $506.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31648 -

Reproduction deck lid for the 67-68 Cougar. Exact reproductions of the originals, these deck lids are well fitting and are a perfect replacement for your old rusty lid.  Does not include hardware or lock cylinder, shipped bare. Here's the installation kit for these reproduction deck lids. Keep in mind that this is an oversized package and will most likely have to be shipped through truck freight. Expect to pay up to $250 in shipping charges. ...

Price: $124.29

Buy Details

Availability: In-Stock Item
Item #: 13478 -

Reproduction front diaphragm for your 67 - 69 Cougar or Mustang Midland power brake booster.Diameter 7 1/4"

Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12206 -

Passenger side rear brake cable bracket. This is a part cut from a car, some trimming and or spot welds will need to be removed prior to installation. Fits all 1967-69 Mercury Cougar and Ford Mustang.

Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 15484 -

Reproduction driver side rear extended floor pan for the 67 - 68 Cougar or Mustang. NOTE: This quality pan can be modified to fit a Cougar, but is designed for the Mustang. You can see in the picture above that when being installed on the Cougar, there will be a sizeable gap along the wheel well. We also carry used patches to fill those gaps ...

Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 15485 -

Reproduction passenger side rear extended floor pan for the 67 - 68 Cougar or Mustang. NOTE: This quality pan can be modified to fit a Cougar, but is designed for the Mustang. You can see in the picture above that when being installed on the Cougar, there will be a sizeable gap along the wheel well. We also carry used patches to fill those gaps. ...

Price: $225.77

Buy Details

Availability: In-Stock Item
Item #: 32613 -

Driver side, rear frame rail, from a 1968 Mercury Cougar. Full length, we cut so that there is some remaining metal on the edges. 1968 was the first year where the inside part of the frame rail has a large access hole for inserting the leaf spring bolt. The large access hole normally should have a plastic body plug to prevent debris from entering the frame rail. Ford part number C8WY-6510125-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size",...

Price: $225.77

Buy Details

Availability: In-Stock Item
Item #: 32614 -

Passenger side, rear frame rail, from a 1968 Mercury Cougar. Full length, we cut so that there is some remaining metal on the edges. 1968 was the first year where the inside part of the frame rail has a large access hole for inserting the leaf spring bolt. The large access hole normally should have a plastic body plug to prevent debris from entering the frame rail. Ford part number C8WY-6510124-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size",...

Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 31019 -

Fits any model that used the banded Midland-Ross booster. This Bakelite hub can be seen when you remove the dust boot. It is a very brittle fragile part that gets broken when you drop the booster, attempt to bleed the brakes with the engine running or install the wrong brake pedal.

Price: $52.75

Buy Details

Availability: In-Stock Item
Item #: 41633 -

Reproduction driver side rear inner apron for both the Mercury Cougar and Ford Mustang.

Price: $52.75

Buy Details

Availability: In-Stock Item
Item #: 41629 -

Reproduction passenger side rear apron for Mercury Cougar and Ford Mustang.Here's a little film to help you fortify your flexxy feline!

Price: $124.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15993 -

Very limited choice of colors in grade "A", so please leave us a note in the comments section when ordering online and we will try to accommodate. Basket weave inserts in grade "A" condition will have all of the Mylar trim in place with no peeling or discoloring.

Price: $29.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33271 -

Grade B will have failing mylar chrome trim. Please list in the comments section of your online order what color you prefer and we will attempt to get you the desired color, limited to stock on hand.

Price: $29.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33272 -

Grade B will have failing mylar chrome trim. Please list in the comments section of your online order what color you prefer and we will attempt to get you the desired color, limited to stock on hand.

Price: $124.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15992 -

Very limited choice of colors in grade "A", so please leave us a note in the comments section when ordering online and we will try to accommodate. Basket weave inserts in grade "A" condition will have all of the Mylar trim in place with no peeling or discoloring.

Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15399 -

Used vinyl cover for the rear interior panel found in the Mercury Cougar. Please let us know what color you need and we will try to accomodate.

Price: $193.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33324 -

All of our Standard and Decor, 1967 and 1968 rear interior panels come naked without the horizontal basket weave strip. We often will leave a yellowed, peeling one in place when they ship but if they are in good shape we remove them and sell them separately. If you purchase a panel from us and want a grade C strip, just mention it in the comments section of your online order and we will include it for free. Used driver side (left hand) rear interior panel in blue for the standard Mercury...

Price: $193.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33323 -

All of our Standard and Decor, 1967 and 1968 rear interior panels come naked without the horizontal basket weave strip. We often will leave a yellowed, peeling one in place when they ship but if they are in good shape we remove them and sell them separately. If you purchase a panel from us and want a grade C strip, just mention it in the comments section of your online order and we will include it for free. Used passenger side (right hand) rear interior panel in blue for the standard Mercury...