Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1585-1632 of 5477
$0 Price: $28.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31196 -

This is our used driver side (left hand) upper rear fender brace. Welds to the upper cowl on any 1969-70 Mercury Cougar and Ford Mustang Ford part number C9ZZ-16A005-A driver side, C9ZZ-16A006-A passenger side.

$0 Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15411 -

Used passenger side (right hand) upper rear fender brace that brace visible when you open the door and look in the upper part of the fender void. Bolts to the cowl on 1967-68 Mercury Cougar and Ford Mustang. Ford part number C7ZB-16A006-A passenger side, C7ZB-16A005-A driver side.

$0 Price: $36.95

Buy Details

Availability: In-Stock Item
Item #: 10893 -

Like working on your Cougar's engine? Keep your Cougar's fender from getting scratched with this Cougar fender cover.Check out this video of our 2013 Open House event!

$0 Price: $35.85

Buy Details

Availability: In-Stock Item
Item #: 12090 -

Like working on your Cougar's engine? Keep your Cougar's fender from getting scratched with this Cougar fender gripper. Check out this video

$0 Price: $219.60

Buy Details

Availability: Rare / NOS Part
Item #: 33853 -

New Old Stock driver side fender extension for the 1967 - 1968 Cougar.  Ford casting number as seen from the back side reads C7WB-16019-A.

$0 Price: $129.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24103 -

Our grade "A" fender extensions have no obvious dings, scrapes or warping due to over tightening of studs. Ford part # C7WB-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested...

$0 Price: $129.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27217 -

Our grade "A" 1967 - 1968 fender extensions have no obvious dings, scrapes or warping due to over tightening of studs. Hardware not included but if you ask for it we will try to include it at no charge. Note that the inner part just behind the eyebrow moulding is painted black from the factory.Ford casting number as seen from the back side reads C7WB-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help. This icon means that we're looking to buy this...

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24102 -

Our Grade "B" 1967 - 1968 front fender extensions almost always have the damage centered around the "tip" as evidenced by the one you see pictured. We will not send you junk, but rather a part needing only minor attention. Notice the portion behind the eyebrow is painted black from the factory. Used hardware is often available for free if you mention it. Do not over tighten this part as they are soft metal and warp easily. Ford casting number as seen on back reads C7WB-16019-A. Do you have...

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27218 -

Our Grade "B" fender extensions almost always have the damage centered around the "tip" as evidenced by the one you see pictured. We will not send you junk, but rather a part needing only minor attention. Ford part # C7WB-16018-A.

$0 Price: $219.60

Buy Details

Availability: Rare / NOS Part
Item #: 32100 -

New Old Stock passenger side fender extension for the 67 - 68 Cougar.  Ford casting number as seen from the back side reads C7WB-16019-A.

$0 Price: $69.87

Buy Details

Availability: In-Stock Item
Item #: 41100 -

This is our reproduction fender fastener kit for you r Mercury Cougar or Ford Mustang.

$0 Price: $7.18

Buy Details

Availability: In-Stock Item
Item #: 26019 -

Bag of 25 reproduction j-nuts for the front fenders on the Mercury Cougar or Ford Mustang.5/8" from bend to center hole.

$0 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: 31747 -

Reproduction Driver side fender extension. This latest in a series of 68 reproduction sheet metal parts is just what the market has been waiting for! The dimensions are EXACT down to the 1/16". NOTE - This splash shield does not come with the rubber, but you can find the seal kit here. Replaces Ford part # C7WB-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help. ...

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 24482 -

This unit consists of a metal shield with rubber stapled to the edges mimicking the fender contours. In most cases, these used shields will need to have the stapled rubber shields replaced. Same part as the1967 piece, but with a section cut out for the marker light housing. A Mustang shield will not fit a Cougar Because the fender has a much different contour.Ford part # C8WY-16A574-A.

$0 Price: $36.45

Buy Details

Availability: In-Stock Item
Item #: 31748 -

Reproduction Passenger side fender extension. This latest in a series of 68 reproduction sheet metal parts is just what the market has been waiting for! The dimensions are EXACT down to the 1/16". NOTE - This splash shield does not come with the rubber, but you can find the seal kit here. Replaces Ford part number C7WB-16019-A. Do you have questions about your Cat’s factory pinstriping? This link may help. ...

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24481 -

This unit consists of a metal shield with rubber stapled to the edges mimicking the fender contours. In most cases, these used shields will need the to have stapled rubber shields replaced. Same part as the 1967 piece, but with a section cut out for the marker light housing. A Mustang shield will not fit a Cougar because the fender has a much different contour. Supply limited due to the proximity to the battery.Ford part # C8WY-16A573-A.

$0 Price: $6.35

Buy Details

Availability: In-Stock Item
Item #: 41101 -

These are our reproduction fender splash shield screws for your Mercury Cougar or Ford Mustang.

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 41296 -

These reproduction fender splash shield bracket screws and J nuts fit both the Standard and XR7.

$0 Price: $4.05

Buy Details

Availability: In-Stock Item
Item #: 41104 -

Here are our reproduction fender to pillar bolts for your Mercury Cougar or Ford Mustang.

$0 Price: $136.36

Buy Details

Availability: In-Stock Item
Item #: 30889 -

Set of nuts and Ferrules for thermactor smog tubes on any 1967 S code 390, 1968 390GT, 1968 GT-E 427-4V, or 1968-70 428 Cobra Jet engines. Mercury Cougar and Ford Mustang, Torino, Cyclone, Ranchero, etc. These will work with original or reproduction smog tubes. Fits most FE engine applications that used the air pump smog system in 1968 with manual transmission. We also have the smog tubes and other hardware.

$0 Price: $32.55

Buy Details

Availability: In-Stock Item
Item #: 26042 -

These dense, cardboard fillers are placed over the trunk drop offs. They are sturdy reproductions that fit well and every old Cougar seems to need them as moisture and general wear and tear take their toll over the decades. Sold as a pair only. If you see these advertised for less money elsewhere we would like to be notified.

$0 Price: $5.94

Buy Details

Availability: In-Stock Item
Item #: 10599 -

New replacement gas tank filler cap for all 1967-69 Mercury Cougars and 1970 Cougars without California emissions. This is a vented fuel cap.

$0 Price: $67.27

Buy Details

Availability: In-Stock Item
Item #: 33643 -

Reproduction fuel filler neck from a 1967-68 Mercury Cougar. Correct for use with factory or reproduction 16 gallon fuel tanks. 

$0 Price: $44.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24199 -

Used fuel filler neck from a 1967-68 Mercury Cougar. Correct for use with factory or reproduction 16 gallon fuel tanks. May have small dent(s) on the side where it is exposed to the loading of stuff in the trunk.I received my fuel filler neck and was very pleased with the condition of my part. You said rust free and it looks very nice. I appreciate this kind of business and am glad there are professional business people like you guys out there serving us Cougar lovers. Thanks again, Looking...

$0 Price: $17.31

Buy Details

Availability: In-Stock Item
Item #: 33181 -

Tall style filter for C4 transmissions.  Fits all Ford C4 transmissions for any 1966-73 Mercury Cougar or Ford Mustang with that W code C-4 transmission. This is designated as the 'tall' filter, introduced in 1965. I guess that Ford installed a deeper pan in 1965? Solid metal construction with filter inside.

$0 Price: $2.57

Buy Details

Availability: In-Stock Item
Item #: 10246 -

Reproduction power brake booster filter for the Midland brake booster used on the 1967-68 Mercury Cougar or Ford Mustang. The Midland booster actually provided better stopping power than the later 1969-70 Bendix booster. The down side is that you will be lucky to get 10 years out of the Midland booster as they are not nearly as reliable of a design as the Bendix unit.Ford part number C3TZ-2A346-B,

$0 Price: $23.27

Buy Details

Availability: In-Stock Item
Item #: 10247 -

Reproduction black 3D printed brake booster filter retainer for the Mercury Cougar and Ford Mustang. Same functionality at the originals, it fits between the brake booster and master cylinder in the aluminum master cylinder spacer. You can find the filter here.

$0 Price: $23.27

Buy Details

Availability: In-Stock Item
Item #: 32601 -

Reproduction black 3D printed brake booster filter retainer for the Mercury Cougar and Ford Mustang. Same functionality at the originals, it fits between the brake booster and master cylinder in the aluminum master cylinder spacer. You can find the filter here.

$0 Price: $32.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12442 -

Used assembly line, white plastic filter retainer for the Mercury Cougar, Ford Mustang and other Fords equipped with Midland Booster. It fits between the master cylinder and brake booster on the aluminum master cylinder spacer. The repro and service replacement filter covers are usually black not white. You can find the filter here. ...

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26300 -

Reproduction Final Inspection Window Decal (Green)for the 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mercury Cougar

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26301 -

Reproduction Final Inspection Window Decal (Red) for the 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mercury Cougar

$0 Price: $338.27

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 18968 -

Reproduction Mercury Cougar and Ford Mustang firewall.Here's our little film to help you fortify your flexxy feline!

$0 Price: $5.05

Buy Details

Availability: In-Stock Item
Item #: 26522 -

This 67 and 68 Firewall To Hood Seal Reproduction has attached rubber studs for mounting. Replaces Ford Part #: C7ZZ-16740.

$0 Price: $1.15

Buy Details

Availability: In-Stock Item
Item #: 30388 -

Rubber plugs for sealing the holes in the firewall of any 1967-68 Mercury Cougar or Ford Mustang. These plug the firewall holes if you don't have air conditioning or if you have deleted your heater core. Fits 1" body panel holes for all years.Sold as a pair.Original Ford part 377678-S2

$0 Price: $68.85

Buy Details

Availability: In-Stock Item
Item #: 26048 -

Reproduction, nice thick firewall insulation pad for the Mercury Cougar or Ford Mustang. We actually like this one better than the "premium" version. These are pre-formed for a perfect fit and appearance and greatly reduced engine noise and heat. The A/C and non A/C versions are the same piece and will fit both A/C and non A/C cars.This pad comes with all the rubber clips needed for installation.

$0 Price: $238.35

Buy Details

Availability: In-Stock Item
Item #: 12863 -

"Premium" firewall pad for your 67 - 68 Cougar or Mustang. It's "premium" in the sense that it's more expensive. The main difference between this and the "economy" version is that it has a layer of foil inside, which helps with heat insulation. However, the total thickness is actually a little less than the economy version. This may make it easier to install, along with the included hard plastic clips (unlike the rubber originals). Given the significant difference in price for negligible...

$0 Price: $16.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32095 -

Oil filter adapter for all Ford small block engines including 221, 260, 289, 289HiPo, 302, and 351W engines. Ford indicates that this was used 1962-1970. Screws into the engine block. We do not know the threads, but the small side is standard oil filter sized.Ford part number C2OZ-6882-C.

$0 Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15806 -

All steel fitting for the lower radiator tank, found on all cars with automatic transmissions. The fine threads go to the radiator and the transmission cooling line screws onto the flared fitting after installation into the radiator. Two needed per car, sold individually. Fits all years 1967-73, and all automatic transmissions. 1/2" threads go to cooling lines. 3/8" threads go into the radiator. *Note - This is an original steel fitting, not a brass reproduction. ...

$0 Price: $488.75

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11865 -

Quality kit that offers precision fit, for use with your stock bell housing. Requires drilling of one hole as well as drilling and tapping of a second hole in your bell housing.

$0 Price: $0.25

Buy Details

Availability: In-Stock Item
Item #: 32913 -

Top screw on the wing or vent window frame on any 1967-68 Mercury Cougar or Ford Mustang. Screw attaches the door glass run insert to the chromed vent frame at the top. Screw accessible when door is open top leading edge of wing window frame. *Item of Note - screw is slightly too long. The tip could scratch the front edge of the door glass or chrome trim on top of the door window. We suggest grinding down the tip about 1/8 inch, prior to installation. We have looked and this is the only...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10943 -

This flat nut has many uses, most commonly used on the 67 - 68 corral / walking cat headlight eyelid door assembly or the 69 - 70 quarter script. Can be used on anything that has a 3/32" stud. Can be used for many items on a variety of vehicles including the Mustang, Torino, Cyclone etc.Sold individually.