Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 3937-3984 of 5073
$0 Price: Free

Buy Details

Availability: Download
Item #: 90017 -

1967 Mercury Cougar Headlight Vacuum Diagrams To download the full high-resolution version, please add this item to your cart and check out. You will receive a download link automatically. 

$0 Price: $65.85

Buy Details

Availability: Rare / NOS Part
Item #: 33112 -

New old stock (NOS) brass fitting found on intake manifolds 1966-67 Mercury Cougar and Ford Mustang. Screws into the rear of the intake manifold directly. With 2 vacuum ports 3/16' and 1/4" for various accessories and a threaded port for the hard line going to the brake booster.  Replaces Ford part number C6AZ-9A474-A.

$0 Price: $52.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32105 -

Used brass fitting found on intake manifolds 1966-67 Mercury Cougar and Ford Mustang. Screws into the rear of the intake manifold directly. With 3 vacuum ports 3/16' and 1/4" for various accessories and a threaded port for the hard line going to the brake booster. Bob Mannel's book indicates that this vacuum fitting was for A/C and Thermactor smog. Replaces generic Ford vacuum fitting part number 9A474.

$0 Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31988 -

Used brass fitting found on intake manifolds 1966-67 Mercury Cougar and Ford Mustang. Screws into the rear of the intake manifold directly. With 2 vacuum ports 3/16' and 1/4" for various accessories and a threaded port for the hard line going to the brake booster.  Replaces Ford part number C6AZ-9A474-A.

$0 Price: $21.47

Buy Details

Availability: In-Stock Item
Item #: 32996 -

Reproduction vacuum fitting for Holley 4150 carburetors as found on 1967-70 Mercury Cougar and Ford Mustang. All brass fitting, goes into the passenger side of the carburetor for the vacuum advance. This should be ported vacuum.Ford part number 358165-S.

$0 Price: $24.71

Buy Details

Availability: In-Stock Item
Item #: 30626 -

This steel fitting mounts into the intake manifold and receives the vacuum hose that runs from the brake booster on 67 Cougars and Mustangs equipped with the 390 4V engine.

$0 Price: $27.77

Buy Details

Availability: Out of Stock
Item #: 30957 -

Reproduction set of color coded A/C rubber hoses, two T connectors and vacuum diagram.

$0 Price: $160.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0030 -

Used vacuum release valve for the tilt / tilt away steering column found in the Mercury Cougar or Ford Mustang. This vacuum solenoid releases the steering column for the swing away function. These vacuum tilt solenoids are tested and guaranteed to work. Bench testing the 1967-69 tilt away release solenoid: Verify that there is continuity between the two electrical spade connectors. No continuity means the the windings in solenoid windings are bad. This is a bad solenoid. Next, put vacuum to...

$7.99 Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 25955 -

Complete reprint of the 1967 Vacuum Schematic for the Mustang. If you would like we can include a copy of the Vacuum Schematic for the Cougar Vacuum Headlight System from the Ford Master Parts Catalog. This is for Mustang so it will not show the Cougar but will work for the vacuum system. Mustang and Cougar were the same with the exception of the headlights.

$0 Price: $185.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27297 -

Used headlight solenoid valve for the vacuum headlight system on the Mercury Cougar and Ford Thunderbird. This functional unit is tested and ready to install.  This is the common version with the separate ground wire where very early 1967 Cougars and Thunderbirds did not have that separate ground wire. We won't always have these used units in working condition in inventory. We also sell a rebuilt solenoid here. Ford part # C7SZ-13A161-A. *NOTE* This item will not ship until a rebuildable...

$0 Price: $685.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32970 -

New Old Stock headlight solenoid valve for the vacuum headlight system on the Mercury Cougar and Ford Thunderbird. This functional unit is tested and ready to install.  This is the early solenoid valve without ground wire. Early 1967 Cougars and Thunderbirds did not have that separate ground wire. Has the proper opaque white color for the vacuum switch plastic.  Ford part # C7SZ-13A161-A.

$0 Price: $165.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10060 -

Used headlight solenoid valve for the vacuum headlight system on the Mercury Cougar and Ford Thunderbird. This functional unit is tested and ready to install.  This is the common version with the separate ground wire where very early 1967 Cougars and Thunderbirds did not have that separate ground wire. We won't always have these used units in working condition in inventory. We also sell a rebuilt solenoid here. Ford part # C7SZ-13A161-A. *NOTE* This item will not ship until a rebuildable...

$0 Price: $38.25

Buy Details

Availability: In-Stock Item
Item #: 26094 -

This unit mounts on the main air chamber, it opens and closes the air vent. Made of nylon with a brass plunger. This unit is easy to test and can be seen by removing the glove box. Often it is the internal spring that fails on these and if your Cougar or Mustang will not easily change between blowing through the defrost ducts and the floor duct, this unit may be the culprit. Switch assembly, servo control. Replaces Ford part # C6OZ-18C311-A. *NOTE* You will need to retain your mounting bracket...

$0 Price: $135.86

Buy Details

Availability: In-Stock Item
Item #: 11-0410 -

Vacuum switch that attaches to the air conditioning lever assembly on all 1967-68 Mercury Cougar and Ford Mustangs with integral A/C.Ford number stamped C7ZA-19B919.

$0 Price: $259.97

Buy Details

Availability: In-Stock Item
Item #: 18509 -

This is a reproduction front valance for your Mercury Cougar. This valance is an excellent reproduction in every detail. Below are pictures of it next to a NOS valance for comparison sake. As you will see, this is an "A" class reproduction in every aspect. Rarely is a reproduction ever a match in any way to NOS. This one is an exception to the rule!Click on images to enlarge. The fasteners for the license plate are just slightly different but the function and placement are dead on.  These...

$0 Price: $536.94

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 33439 -

These reproduction valances have been modified and fitted with high quality reproduction XR7G fog light buckets. When you compare an original valance to these you will see much more care was given than in the originals when placing the buckets. These will require minimal finish work where the buckets were welded to the valance. This is a limited production run only available from WCCC.Replaces Ford part number C8WY-17620

$0 Price: $433.89

Buy Details

Availability: Rare / NOS Part
Item #: 42360 -

Very Limited supply. Keep in mind that when ordering multiple oversized items from us online that the shopping cart does not know how to best combine items to save you the most money. We suggest cutting and pasting your order into an email so we can manually calculate shipping costs.

$0 Price: $49.85

Buy Details

Availability: In-Stock Item
Item #: 18511 -

THERE ARE NO RETURNS ON THIS PART. Not a good fit but you can make them work...You will have to elongate a couple of the small holes that mount the valance under the bumper, but not by much. Once mounted the part looks as though it was not made quite wide enough. We recommend purchasing our premium version, because honestly, you'll spend a lot of time trying to get this offshore reproduction to fit right.  Please do not call us and say you are disappointed with this part; we are telling...

$0 Price: $188.35

Buy Details

Availability: In-Stock Item
Item #: 32271 -

Premium reproduction rear valance for the 67 - 68 Cougar. This valance is a direct fit, as opposed to our economy version which take a bit of modifying just to be installed and will never look like if really fits right. This premium valance is very durable weighing in at 5.12 pounds, compared to an original which weighs 4.11 pounds. Replaces Ford part # C7WY-65405144-A. ...

$0 Price: $530.87

Buy Details

Availability: Rare / NOS Part
Item #: 42364 -

We have a very hard time keeping these NOS rear lower valences in stock. Since the reproductions don't quite fit right, NOS and good used are the best options at this time.Ford part # C7WY-6540544-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store...

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23947 -

Mounts on the rear of either the 289-2V or 289-4V factory cast iron intake manifold. This valve has three equal sized vacuum hose fittings in addition to the steel line going to an intake manifold vacuum source. Due to the age of these valves, we cannot guarantee that they will work. Consider this valve non-functional. Ford part number C6OE-E or C6AZ-9B289-E. 1967 California emissions only.

$0 Price: $160.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23905 -

Mounts on the rear of the intake manifold, it must be a 1967 or possibly a 1966 "S" intake manifold. There are no mounting provisions on 1968 or later factory cast iron intake manifolds. This valve has two equal sized vacuum hose fittings in addition to the steel line going to an intake manifold vacuum source. Due to the age of these valves, we cannot guarantee that they will work. Consider this valve non-functional. Ford part number C6AE-E or C6AZ-9B289-C. 1967 California emissions only. ...

$0 Price: $225.00

Buy Details

Availability: Out of Stock
Item #: 33301 -

Core C-6 Transmission valve body for any 1967-68 Mercury Cougar or 1967-68 Ford Mustang with code "U" transmission code on the door tag. This is only for 1967 through 1968 transmissions with P-R-N-D-2-1 shift pattern. Sold as a core, should be thoroughly cleaned and rebuilt with quality parts. These units can be upgraded with 'shift kits' to firm up shifts, add longevity, and they help reduce and eliminate clutch and band slippage. Various kits available in the aftermarket, we offer one as...

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 26577 -

For 351 Cleveland or Windsor when equipped with the "Flame Arrestor" PCV Valve. Also fits multiple applications with 1" hole in steel valve covers in which the PCV valve presses into. Inside diameter is 23/32". Replaces Ford Part #: C8SZ-6892, C8SZ-6A892-A or 381898S.

$0 Price: $87.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24069 -

C7OZ-6582-C Chromed valve cover with "Powered by Ford" embossed in the metal. Correct on 1967-1970 Mercury Cougar and Ford Mustang with 390/427/428CJ engines. These are used, and will have some minor pitting or stains in the plating.Sold individually *Restoration Tip - The difference between the chromed 390GT valve cover and painted valve covers is only the chrome plating. *Note - Some 1969-70 428 Cobra Jet engines came with one of two different styles of finned cast aluminum valve covers. ...

$0 Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24017 -

C7AZ-6582-A Ford engine blue painted valve cover with "Powered by Ford" embossed in the metal. Correct on 1967-1969 Mercury Cougar with 390 engines. We are pretty sure that these painted valve covers were installed on non-GT cars without the engine dress up kits. Most 6.5 liter cars and the X code 390-2V would have had these painted valve covers. Right is the same as left, these are sold individually. Getting hard to keep in inventory, plan on some minor rust and or straightening. A good junk...

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23915 -

Smooth painted valve cover without "Powered by Ford" embossed in the metal. Correct on 1967 Mercury Cougar and 1966-67 Ford Mustang with 289 engines. These will be dirty, and scratched. Plan on cleaning thoroughly, doing minor body work, sanding and painting prior to installation.  Ford part # C6AZ-6582-G. *Restoration Tip* "Powered by Ford" valve covers were not generally used until the 1968 model year. These smooth small block valve covers are correct for 1967 cars. Those wanting to...

$0 Price: $219.95

Buy Details

Availability: In-Stock Item
Item #: 13841 -

1967 - 1969 Mustang, Cougar, Fairlane GT, and Ford vehicles with FE Series 390-427-428-428CJ engines. Chromed steel "Power By Ford" valve covers. Original equipment on all "S", "W" & "R" code big block Cougars. Super detail, domed chrome valve covers with embossed "Power By Ford" lettering. Also has internal baffles installed as original, price per pair. Click on images to enlarge. ...

$0 Price: $114.17

Buy Details

Availability: In-Stock Item
Item #: 26038 -

These "Cal Custom" style Valve Covers look great and really compliment the Finned Oil Pan and Air Cleaner. These covers offer a true "old school" look. * Requires one of each of the following (sold separately): PVC grommet, oil cap grommet, and push on style oil cap.

$0 Price: $81.15

Buy Details

Availability: In-Stock Item
Item #: 31255 -

Reproduction high quality chrome calve covers. Designed to fit small block engines. OE on 64 - 66 HiPo "K" engines. Will also fit the 302. These were actually used on the 65 - 66 Mustang but some folks like to use them on the Cougar because of their clean no nonsense look. Keep in mind this pair requires the push on oil cap, not the twist on. Sold as a pair. ...

$0 Price: $349.85

Buy Details

Availability: In-Stock Item
Item #: 13840 -

These valve covers no longer come with the word "Cougar", only the walking cat. Before these high quality reproductions were reproduced original pairs often traded hands for $400-600. This pair is better quality than the originals in every way. They will allow for roller tip rockers (unlike originals) have better quality casting characteristics and are made from better material. These were standard on every 1968 302 XR7-G and an over the counter option for any 289 302 or 351 Windsor equipped...

$0 Price: $410.75

Buy Details

Availability: In-Stock Item
Item #: 11666 -

Same as our crinkle finished Mercury Cougar valve covers but with a polished finish. These are rarely in stock so do not be surprised if our system will not let you order. We get these from Scott Drake and the only reason they polish a few sets a year is when they find a set of black covers that have a defect, they send them in to be polished. So... The only time we have these in stock is when they find blems to polish. Please do not ask us when we expect to get more in, we have no idea when...

$0 Price: $4.75

Buy Details

Availability: In-Stock Item
Item #: 53238 -

Short steel chromed valve stem for Ford wheels or any steel wheel with a 0.453" hole. Clamp in or bolt in style, sticks up 3/4 from wheel surface, 200psi maximum pressure. These will work with our aftermarket Ford wheels without trim rings. These are not compatible with our aluminum wheels.Premium grade, marked for "High Temperature".

$15.00 Price: $18.45

Buy Details

Availability: In-Stock Item
Item #: 25965 -

Complete four piece door vapor barrier kit specifically cut for the year of your Cougar.

$0 Price: $32.65

Buy Details

Availability: In-Stock Item
Item #: 15689 -

Reproduction pair of vent / wing window handles for the Mercury Cougar or Ford Mustang.

$0 Price: $17.35

Buy Details

Availability: In-Stock Item
Item #: 10252 -

Reproduction driver side (left hand) vent / wing window handle for the Mercury Cougar or Ford Mustang.

$0 Price: $17.35

Buy Details

Availability: In-Stock Item
Item #: 10251 -

Reproduction passenger side (right hand) vent / wing window handle for the Mercury Cougar or Ford Mustang.

$0 Price: $18.55

Buy Details

Availability: In-Stock Item
Item #: 30783 -

Concours rear axle vent hose for any 1967-73 Mercury Cougar or 1965-73 Ford Mustang. Rubber hose that attaches to the metal nipple on the top of your rear axle housing. Fits 8 and 9 inch rear ends. Includes hardware as shown. Crimp clamp, screw clamp and bolt. Ribbed hose like original, and has yellow paint mark like from the factory. About 20 inches of hose is included, a little more than what was from the factory. Part number 4A001 in the chassis assembly manual.

$0 Price: $178.15

Buy Details

Availability: In-Stock Item
Item #: 10242 -

Reproduction driver side (left hand) vent window frame for the Mercury Cougar or Ford Mustang.NOTE! Whereas you can make these off shore reproductions work we have found that virtually every angle, screw hole and dimension is found to be slightly to moderately off when comparing to the originals. No returns please. Check out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration ...

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15717 -

Used driver side (left hand) vent window frame as it comes out of thedoor. This unit is just the bare window frame and will need some cleaning as itis 40 plus years old. A great option for those of you who have a limited budget. Also, because this is an original piece, it will have a far superior fit and function than the"off shore" reproductions that are currently offered.Ford part # C7ZZ-6522205-A.*Note* "B" grade will have some pitting in the chrome on theinterior side of the frame. Check...

$0 Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24224 -

C7ZB-6522223-A Bare vent frame, no attaching parts, or glass. For all 1967-68 Mercury Cougar and Ford Mustangs. B grade quality only, will have some rust pitting.Ford Master part number C7ZZ-6522205-A. Check out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration

$0 Price: $273.35

Buy Details

Availability: In-Stock Item
Item #: 31801 -

Reproduction driver side (left hand) vent window frame for the Mercury Cougar or Ford Mustang.  This premium reproduction is a much better fit than the economy overseas version. Check out our video below for helpful tips on disassembling your vent and quarter windows: 67-68 Cougar/Mustang Vent & Quarter Windows - Disassembly for Restoration ...