Welcome to the NEW WCCC Cougar Parts Catalog (Tell us what you think)
We now require a $25 $5* minimum website order (Read More)
loading . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 365
Price: $0.55

Buy Details

Availability: Normal Stock Item
Item #: 30880 -

This stepped window trim clip is great for times when your stainless trim just will not click into place. We have found that the reproduction cougar rear window gasket is a little taller than OEM and this adjustable clip allows you to compensate. Another instance this multi-fit clip works is when someone has replaced one or more nail-heads that the clip fastens to and located them in the wrong place.Sold Individually. These clips attach to posts built in to the car. In case you're missing some...

Price: $4.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19333 -

Headlamp adjusting screw. Typically found on 1969 and 1970 Mercury Cougars. This part is identified by the clipped corner,s but works fine and was used during 1967 and 1968.

Price: $2.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20025 -

This bolt is what adjusts your headlamp cover height. Many people do not know they can rid themselves of that droopy eye look (misaligned grille) by placing new rubber pads on the heads of these bolts and adjusting them. Four required per car, sold individually. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

Price: $20.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30251 -

This bolt is what adjusts your headlamp cover height. Rare find to still have an original rubber bumper in place that is not compressed or cracked. Four required per car, sold individually. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

Price: $19.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24137 -

Driver side headlight door. If you happen to be missing this door (bezel) you are doing damage to your grille each time you open and close the covers (eyelids). This acts as more than just a finish piece, it adds rigidity to your grille which is made from a rather soft metal. This listing is for the driver side headlight door. The backside is marked TOP R.H. / L.H. and carries and Ford casting number of C7WB-13052 for the passenger side and C7WB-13064 for the driver side. The four Phillips...

Price: $19.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27314 -

Passenger side headlight door.If you happen to be missing this door (bezel) you are doing damage to your grille each time you open and close the covers (eyelids). This acts as more than just a finish piece, it adds rigidity to your grille which is made from a rather soft metal. This listing is for the driver side headlight door. The backside is marked TOP R.H. / L.H. and carries and Ford casting number of C7WB-13052 for the passenger side and C7WB-13064 for the driver side. The four Phillips...

Price: $154.85

Buy Details

Availability: Normal Stock Item
Item #: 23456 -

A scratch obtained during shipping, an irregularity in the anodized plating process, a ding in a hard to reach spot that did not come out 100%, a slip on the buffer wheel or a pin hole created by over polishing are what you can expect on a blemished piece of trim. We try to carefully examine every trim part that comes back from our restorer for the smallest of imperfections. If we would not place them on our $40,000.00 Cougar we do not expect you to... From 10-15 feet away these will look good...

Price: $69.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31216 -

Bracket tack welded in the trunk to reinforce the rear structure for mounting the rear bumper. Ford part number C7ZZ-17B862-A, fits all 1967-68 Mercury Cougar and Ford Mustang. These are sold individually, these are not side specific. There is also a reproduction version available. Used part cut from a 1967-68 Mercury Cougar, some spot welds will need to be drilled out on your end. Picture shows approximately what you will receive. 

MSRP:$489.99
Price: $453.85

Buy Details

Availability: Normal Stock Item
Item #: 42507 -

This option includes paying a core charge. By choosing this option, the re-chromed bumper you receive will have started the re-chroming process as an average quality core. We highly recommend that you send us your core first. Here's why: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming...

Price: $453.85

Buy Details

Availability: Normal Stock Item
Item #: 12596 -

This option REQUIRES sending your core in advance. Here are the advantages of pre-sending your core: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming process as a superior quality core. You can find out the quality of your core before paying a core charge and avoid unnecessary core charges....

Price: $1.85

Buy Details

Availability: Normal Stock Item
Item #: 30127 -

This is the flat topped rubber bumper that attaches to the top part of your center grille and keeps a small gap between the two panels to prevent paint chips. There were two versions of this bumper, one was this flat topped bumper, and the other had a rounded top. Find the round topped version here.

Price: $0.85

Buy Details

Availability: Normal Stock Item
Item #: 19068 -

This little rubber part attaches to the top, flat part of your center grille and keeps a small gap between the two panels to prevent paint chips. This is actually an ash tray bumper but it is a decent substitute (a little smaller than the original) for the center grille bumper. The originals had a flat top as opposed to this bumper which has a rounded top. You can find the flat topped version here. ...

MSRP:$489.99
Price: $453.85

Buy Details

Availability: Normal Stock Item
Item #: 42508 -

This option includes paying a core charge. By choosing this option, the re-chromed bumper you receive will have started the re-chroming process as an average quality core. We highly recommend that you send us your core first. Here's why: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming...

Price: $453.85

Buy Details

Availability: Normal Stock Item
Item #: 12598 -

This option REQUIRES sending your core in advance. Here are the advantages of pre-sending your core: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming process as a superior quality core. You can find out the quality of your core before paying a core charge and avoid unnecessary core charges....

Price: $1,554.85

Buy Details

Availability: Out of Stock
Item #: 11501 -

THIS KIT HAS A CORE CHARGE OF $750 Here is a time and money saving package deal for the person restoring their 1967 or 1968 Cougar. This package includes: Hood lip moulding Fender extension mouldings Quarter extension mouldings Grille center trim Deck lid moulding Drip rail mouldings Nine piece front and rear window trim Front and rear Award Winning Bumpers All parts are show quality. The bumpers are triple plated chrome, the aluminum has the correct anodized finish just like NOS and the...

Price: $2.85

Buy Details

Availability: Normal Stock Item
Item #: 41745 -

This bumper bolt is sold individually and replaces Ford part # C4ZB-17758-A. It features the correct "button" head profile covered in stainless steel. Silver zinc with wax coating to extend plating life. Reduced shoulder height allows the nut to seat properly.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more...

MSRP:$19.99
Price: $15.85

Buy Details

Availability: Normal Stock Item
Item #: 41787 -

This is a complete kit for front and rear. If you own a 71 - 73 and then you will need two more bolts. mercurycougar.net: I was in Salem on business Monday when I decided to give West Coast Classic Cougar a call. Don was gone but Lin was there, talk about a nice guy I looked around the shop and Lin got me the parts I needed for my 68 Coupe. I am sure Lin was busy but he took the time to answer any questions I had, swapped a few stories and gave me a real good deal. I recommend anyone needing...

Price: $70.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24168 -

C7WY-17767-A Front bumper mounting arm, 1967-68 Mercury Cougar, driver side.

Price: $70.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24167 -

C7WY-17766-A Front bumper mounting arm, 1967-68 Mercury Cougar, passenger side.

Price: $70.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24166 -

Mustang bumper brackets do not work on Cougar. C7WY-17755-A.

Price: $74.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24165 -

Often passenger side brackets have battery acid damage thus the higher price for clean, undamaged passenger side brackets. C7WY-17754-A.

Price: $24.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24171 -

Sold individually, two required per car. Right is the same as left. These Western rear bumper brackets are not heavily rusted, the threads are in perfect shape and they are not bent. Master part number C7WY-17A750-A.

Price: $209.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11500 -

Good used set of crack free, bend free original brackets. These are Western parts that have never been exposed to road salt and can easily be restored to show quality standards.

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26994 -

Used driver side (left hand) bumper guard for the Mercury Cougar. The chrome plating was pretty low quality back in the day and this unit will show some scratches and pitting as it is an almost 50 year old original part.Ford part # C7WY-17997-A for the driver side.

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26995 -

Used passenger side (right hand) bumper guard for the Mercury Cougar. The chrome plating was pretty low quality back in the day and this unit will show some scratches and pitting in the chrome as this is an almost 50 year old original part.Ford part # C7WY-17996-A for the passenger side. ...

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26996 -

Used driver side (left hand) rear bumper guard for the Mercury Cougar. The chrome plating was pretty low quality back in the day and this unit will have some scratches and pitting as it is an almost 50 year old original part. Mounting diagram not included, if you need one CLICK HERE for a printable version. Ford Part #: C7WY-17985-A. *NOTE* Driver side is stamped with an "L" on the backside. ...

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26997 -

Used passenger side (right hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting as it is an almost 50 year old original part. Mounting diagram not included, if you need one CLICK HERE for a printable version. Ford part # C7WY-17984-A. *NOTE* Passenger side is stamped with an "R" on the backside. ...

MSRP:$219.99
Price: $155.85

Buy Details

Availability: Normal Stock Item
Item #: 11495 -

These Rechromed Front Bumper Guards / Bumperettes for the 67 and 68 Mercury Cougar are sold as a pair on an exchange basis. These are triple plated, show-chrome. Your existing original bumper guards may look fine now but when you place them next to our rechromed bumpers they will look poor in comparison. Passenger side C7WY-17996-A, driver side C7WY-17997-A. ...

Price: $8.85

Buy Details

Availability: Normal Stock Item
Item #: 41091 -

Hardware for mounting the hood bumpers on the radiator core support. Clip mounts with threads down, nut on top. Sold as a Kit as Pictured.

MSRP:$51.99
Price: $42.85

Buy Details

Availability: Normal Stock Item
Item #: 26096 -

After several months of working on this new vacuum check valve, we now have our first run completed and in hand. This part actually exceeded our quality expectations and I think you too will be very happy with the outcome. As you will see from our pictures below, we have duplicated every mark on this unit right down to the smallest of details only seen under magnification. Also fits many 1967 - 1973 Mercurys and many 1967 - 1973 Lincolns Click on images to enlarge. The part in the foreground...

Price: $59.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19220 -

This check valve is located in-line just behind your carburetor. To test it simply place it in your lips and try blowing through the side with the single port. You should be able to breath in and not breath out. If this valve is bad you will find the headlights opening up after the engine has been shut off on your 1969 - 1970 Cougars and your tilt away function not working correctly on your 1967 - 1970 Cougars equipped with a tilt column. A good working vacuum system should be able to...

Price: $6.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12091 -

This clip looks just like the larger quarter extension moulding / trim moulding clip, but is smaller (as our comparison picture shows). One clip per side is used to attach the tail end (smaller end) of the moulding / trim to the extension. This unit is also almost exactly the same as the rear deck / trunk lid moulding / trim clip, but this quarter extension clip has a slightly shorter stud. Rarely will the clip you get look as good as the pictured here, usually the "finger" will be missing....

Price: $1.05

Buy Details

Availability: Normal Stock Item
Item #: 26141 -

This trim clip is a little larger than the original C4GB-6242364-A retainer assembly Ford used and looks a little different, but will work just fine for the front extension mouldings. This will also suffice as a good substitute for the 46 clips used on the 1968 GTE side moldings. Sold Individually.Length: 13/16" from lip to lip.

Price: $3.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26517 -

This fragile little clip attaches to the bottom outer edge of the front fender extension and holds the tail of the aluminum eyebrow moulding to the extension, one per side. They almost always fail when you remove them, and to be honest, we rarely have them in stock. We do not list these hard to find parts to tease you, but rather for documentation purposes. We do offer a nice reproduction clip that you can get right here that will work great. ...

Price: $2.85

Buy Details

Availability: Normal Stock Item
Item #: 10542 -

Reproduction large moulding / trim clip for the rear quarter extensions and front fender extensions on the Mercury Cougar. The molding / trim on the 1967-68 rear quarter extension and 1969 front fender extension both require 2 different sizes of clips to properly hold them in place. For the 1967 and 1968 rear quarter extensions, you will need one of these large clips and 1 smaller clip per side. For the 1969 Cougar you will need 1 of these larger clips along with 2 smaller clips per side. This...

Price: $8.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26515 -

This clip looks just like the smaller rear deck / trunk lid moulding clip but is larger (as our comparison picture shows). One clip per side is used to attach the tail end (larger end) of the moulding to the extension. Rarely will the clip you get look as good as the pictured here, usually the "finger" will be missing. These clips are for the purest where originality is of the utmost importance. If originality is not an issue, you can get our excellent reproduction clip right here and...

Price: $1.25

Buy Details

Availability: Normal Stock Item
Item #: 27491 -

Reproduction clip for the rear quarter extension moulding / trim on the Mercury Cougar. The rear quarter extension moulding / trim uses 2 different size clips. This is the smaller of the two. One per side, 2 per car. Get the larger clip here. Replaces Ford part # C7WB-65291B80-A. *NOTE* Will work with the 1967-70 trunk trim, but the nuts are wrong style.

Price: $1.85

Buy Details

Availability: Normal Stock Item
Item #: 10541 -

Reproduction metal rear deck / trunk lid moulding / trim clip for the Mercury Cougar. This clip comes with a correct looking nut and works with the 1967-68 aluminum trim and the 1969-70 stainless steel trim. This unit measures about 1-7/8" long with a stud height of about 3/4". 7 clips needed per trunk lid. Note that this clip features a stud that is a little longer than what was factory. If you have a swollen lip (rust) on your deck this will be an advantage to you, if not you will have to...

Price: $4.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26506 -

Used clip to attach the rear deck / trunk lid moulding / trim on the Mercury Cougar that comes with a reproduction cadmium plated acorn nut. Seven of these clips were used to mount the anodized aluminum 1967-68 trunk lip moulding / trim to the trunk. These clip can also be found on some early 1969 Cougars with a stainless steel deck moulding / trim. This used clip is for our type "A" personality purists that insist on having the original part, even though nobody will ever see it. If ultimate...

Price: $0.25

Buy Details

Availability: Normal Stock Item
Item #: 19951 -

These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B. Sold Individually. Clip Guide Vehicle # of Clips 1967 - 1968 Front 22 1967 - 1968 Rear 20 1969 - 1970 Front 13 1969 - 1970 Rear 24 1971 - 1973...

Price: $1.85

Buy Details

Availability: Rare / NOS Part
Item #: 10354 -

This clip mounts the actuator shaft to the eyelids. Two required for 1967 - 1968, one required for 1969 - 1970. Same clip holds the windshield wiper motor to the wiper transmission. New old stock Ford part number C4ZB-17450-C.

Price: $1.05

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26518 -

This clip mounts the actuator shaft to the eyelids. Two required for 1967 - 1968, one required for 1969 - 1970. Same clip holds the windshield wiper motor to the wiper transmission.

Price: $11.85

Buy Details

Availability: Normal Stock Item
Item #: 20181 -

Reproduction metal rear deck / trunk lid moulding / trim clip for the Mercury Cougar. This clip comes with a correct looking nut and works with the 1967-68 aluminum trim and the 1969-70 stainless steel trim. This unit measures about 1-7/8" long with a stud height of about 3/4". 7 clips needed per trunk lid. Note that this clip features a stud that is a little longer than what was factory. If you have a swollen lip (rust) on your deck this will be an advantage to you, if not you will have to...

Price: $29.85

Buy Details

Availability: Normal Stock Item
Item #: 30662 -

Set of seven used clips with reproduction stainless steel acorn nuts. These fit the best when using an original aluminum deck lid moulding on a 1967 or 68 Cougar. In 69-70 a stainless deck trim was used and the clip was all metal with no plastic coating. For more insight on this tricky trunk trim, check out our video below: ...

Price: $55.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15714 -

Far better quality than the reproductions. The driver side (left hand) has a C7WY-16304-C Ford part number and the casting (or engineering) number imprinted on the top of the driver side part is C7WB-17B957-A. The Mercury MPC refers to these as "anti squeak pads." Sold individually, not as a pair*NOTE* The parts pictured have been cleaned with steel wool for the sake of showing detail and quality. The part you will receive will be "as taken from a parts car" and will need cleaning. Sold...

Price: $23.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15710 -

Sold individually. This grade "B" filler is what comes in on the majority of our parts cars. This used hard rubber part will have some sort of blemish in that they may be slightly warped, chipped or have a visible scratch, maybe even a factory blem has been found that will drop it to a grade "B" level. Steel wool is a good way to clean it up and boiling it in water before install can often times make it appear less warped. This (albeit less than perfect) looks better than the reproduction in...

  • < Prev
For your convinence, you can view this page on our old site by the following link:
View Page On Old Site.