Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2641-2688 of 5073
$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 31699 -

New O-ring gasket for the 1967-68 Mercury Cougar flip trunk lock cylinder. Lock cylinder must be removed from the trunk lock housing to install. Original O-rings are normally cracked and broken when we disassemble them. 

$0 Price: $75.00

Buy Details

Availability: Rare / NOS Part
Item #: 33242 -

New Old Stock oil fill cap for 1967 Mercury Cougar or Ford Mustang with 289 and California emissions. This black painted push on oil cap was on California sold cars with closed emissions systems. Identified by the vertical pointing elbow, for attaching a hose to the air cleaner base. Marked Autolite stamped on the top. Originals would have been stamped FoMoCo, this is a service replacement. Ford part number C4TZ-6766-A. *Note - a chromed version was also available with engine dress up...

$0 Price: $75.00

Buy Details

Availability: Rare / NOS Part
Item #: 33262 -

New Old Stock oil fill cap for 1967 Mercury Cougar or Ford Mustang with 289 and California emissions. This chromed push on oil cap was on California sold cars with closed emissions systems and engine dress up kits. Identified by the vertical pointing elbow, for attaching a hose to the air cleaner base. Marked Motorcraft stamped on the top. Originals would have been stamped FoMoCo, this is a service replacement. Ford part number C5ZZ-6766-D.Black version also available, see related parts. ...

$0 Price: $37.15

Buy Details

Availability: In-Stock Item
Item #: 13861 -

Correct detail. Chrome plated with rectangle-style FoMoCo script stamped into the top surface of cap. Nipple measures 5/8" diameter. This is the correct Closed Emissions oil cap for the finned "G" valve covers we sell.

$0 Price: $8.45

Buy Details

Availability: In-Stock Item
Item #: 13860 -

Brightens the engine compartment and looks sharp. Fits aftermarket valve covers only. These require a rubber grommet to fit into the valve cover. Please Note: This oil cap DOES NOT fit the finned "G" valve covers we sale, as they are built to OEM specs.

$0 Price: $77.27

Buy Details

Availability: Restored / Remanufactured
Item #: 30847 -

Rechromed, used oil fill cap for 1967 Mercury Cougar or Ford Mustang with 289 or 390 and California emissions. This chromed push on oil cap was used on the DGS package or 390 GT engine dress up kit which included chrome valve covers and air cleaner lid. Identified by the vertical pointing elbow, for attaching a hose to the air cleaner base. Marked FoMoCo on the top inside a rectangle box.*Note - a Black painted version was also available on most 289 engines sold in California.

$0 Price: $25.07

Buy Details

Availability: In-Stock Item
Item #: 13859 -

Correct detail. Chrome plated with oval-style FoMoCo script stamped into the top surface of cap. This is a push on cap and requires the type of cap that has a round filler tube protruding from the driver side valve cover. This is the correct Open Emissions oil cap for the finned "G" valve covers we sell.

$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 17293 -

Used oil fill cap for 1967 Mercury Cougar or Ford Mustang with 289 engine. This black painted twist on oil cap was found on non-emission cars. Meaning 49 States except for California.*Note - a chromed version was also available with engine dress up kits.

$0 Price: $50.45

Buy Details

Availability: In-Stock Item
Item #: 41566 -

This 49 state oil filler cap fits valve covers that utilize twist-on oil caps. This cap is a reproduction of the original cap that was found on 1967 models with the S code 390 and 289 engines with dress up kit like found on DGS 1967 Cougars.. This part features a quality chrome finish along with a crisp "FoMoCo" stamping. At its widest point it is 3" in diameter. The total height is 2 1/4" high including the portion that goes into the valve cover.* Trivia - For 289 engines it should have an...

$0 Price: $31.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31973 -

Used 1970-72 black AUTOLITE marked oil fill cap with black plastic elbow. Several variations noted from our collection, AUTOLITE and MOTORCRAFT versions. Will need detailing or fresh black paint applied. Would also suggest replacing the rubber grommet. These 50 year old rubber grommets are rock hard and likely leak air. Gasket to valve cover will also need replacement. Even though this cap has a 1971 parts number, we see these on the 1970 351C engines quite often. Replaces Ford part...

$0 Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31972 -

Original used oil filler cap adapter for any 1967 Mercury Cougar or 1965-67 Ford Mustang. This is for use with the open emissions, push on oil cap. This adapter allows for slip-on type oil caps to be used on valve covers with the twist-on style cap hole. 1.25" O.D. Will most definitely need a new gasket. These will ship "as found" or fresh from our wrecking yard. Photo is most cases will show a cleaned part for glamour photography shots. Also have reproduction version.Ford part...

$0 Price: $45.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27352 -

Engine oil dipstick as found on most any 1967 Ford with 289 engines (C, A, or K Code). This has the correct small shield as found on 1967 and earlier cars, starting in 1968 this dip stick gained a larger 'bell' shaped shield that went over the dip stick tube. Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of the shield to the dip stick end is approximately 19.40 inches. The handles appear to have been painted black...

$0 Price: $16.07

Buy Details

Availability: In-Stock Item
Item #: 11271 -

Nice reproduction oil dipstick made from all stainless steel. Only fits 289 or 302 Ford engines from 1967-73. These dipstick tubes have the 'full' and 'add' markings in the correct place, however they do not have any Ford part numbers stamped on them. Black steel as shown, not plain shiny steel like originals.Replaces Ford part # C7OE-6750-B or C8OE-6750-B.

$0 Price: $182.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27357 -

Chromed engine oil dipstick as found on many 1967-69 Ford with 390 engines (S Code), 427-4V (W Code), 428CJ (Q or R Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. Top of the shield to the dipstick end varys at either 19.25" and approximately 20.25" (full, add, and safe marks are the same). The handles were chromed originally. Ford part # C7OZ-6750-A, Ford casting # C7OE-6750-A.

$0 Price: $85.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27358 -

Painted engine oil dipstick as found on many 1967-69 Ford with 390 engines (S or X Code). Ford used several different suppliers and there are differences that show up in the finger handle as shown. From the top of the shield to the dipstick end varys from either 19.25" to approximately 20.25" (full, add, and safe marks are the same). The handles were painted blue originally. Typically the painted dipsticks were found on the non-GT (6.5 Litre) cars in 1968. Ford part # C7AZ-6750-A, Ford casting...

$0 Price: $12.85

Buy Details

Availability: In-Stock Item
Item #: 15295 -

Original design in painted Ford Blue. Beautiful fit, a really nice part. Also known as oil level indicator tube. Replaces Ford part # C6AZ-6754-A.

$0 Price: $31.05

Buy Details

Availability: In-Stock Item
Item #: 41535 -

Also available in Chrome. We recommend going with a good used tube because these reproductions just don't fit. Here's what we found out:The original dipstick tube measures .362The one we sell with paint on it measures .375With the paint Stripped, it measures .365It will not fit in correctly even after attempting to smack it in with a mallet with the paint stripped off. Replaces Ford part # C7OZ-6754-A.

$0 Price: $33.85

Buy Details

Availability: In-Stock Item
Item #: 15294 -

Nice chrome finish. Also available in Ford blue. We recommend going with a good used tube because these reproductions just don't fit. Here's what we found out:The original dipstick tube measures .362The one we sell with paint on it measures .375 With the paint Stripped, it measures .365 It will not fit in correctly even after attempting to smack it in with a mallet with the paint stripped off. Replaces Ford part # C7OZ-6754-A. ...

MSRP:$160.00
$160.00 Price: $114.25

Buy Details

Availability: In-Stock Item
Item #: 26023 -

Famous 'Cal Custom' aluminum finned oil pan that was so popular throughout the 60's, 70's and 80's. It has not been available for years, but it is back again. Pan is made from all new pressure die cast tooling and then fully machined to offer a precise fit and leak free installation. These look great in combination with the Finned Air Cleaner and Valve Covers. Replaces Ford Part #: C5ZZ-6675.

$0 Price: $184.65

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15311 -

This is by far the best, most correct FE pan ever offered. Very accurate reproduction of the C6OZ-6675-A oil pan used first on the 1966 Fairlane and Comet with one of the 390 CI optional engines. It is 100% correct for 1968 and early 1969 428CJ. It is not 100% correct for the 428SCJ but still a good alternative.

$0 Price: $30.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33549 -

Used oil screen pick up tube assembly from a small block Ford 260, 289, or 302 engine. This is for most front sump 260, 289, or 302 engines in Ford cars up to at least 1972. Used item, should be degreased and cleaned inside and out prior to installation. Tube assemblies with damaged screens, damaged tubes or bends are thrown away or scrapped. We only save undamaged, used oil pick up tubes. Melling sells a quality reproduction of this item.* Excludes 351W and 351C engines, and all F Series...

Oil Pressure Sending Extension - DUAL PORT - Repro ~ 1963 - 1973 Mercury Cougar - 1963 - 1973 Ford Mustang
Ford Bronco (1966-1977)|Ford F-100 (1973-1983)|Ford F-250 (1973-1986)|Ford F-350 (1973-1986)|Ford Fairlane (1964-1973)|Ford Falcon (1964-1970)|Ford Galaxie (1964-1967)|Ford Gran Torino (1972-1973)|Ford Mustang (1964-1966)|Ford Ranch Wagon (1964-1973)|Ford Ranchero (1964-1973)|Ford Thunderbird (1964-1973)|Ford Torino (1968-1973)|Mercury Comet (1969)|Mercury Comet (1971-1973)|Mercury Cyclone (1969-1971)|Mercury Marauder (1969-1970)|Mercury Marquis (1969-1973)|Mercury Montego (1969-1973)|Mercury Monterey (1969-1973)
0
$0 Price: $34.55

Buy Details

Availability: In-Stock Item
Item #: 32221 -

Hex shaped Oil Pressure Sending Unit Extension. Mounts the oil pressure sensor away from the engine blockConstructed from steel with a durable zinc finish. 1/4" NPT male & female ends plus an additional 1/8" NPT female port for items requiring an auxiliary oil pressure source. Eliminates the need for a T-fitting adapter when adding an aftermarket gauge or sensor. Replaces Ford Part # : C2OZ-9B339 and D1UZ-9B339-DP

$0 Price: $24.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16197 -

Hex shaped extension. Made from machined metal. Used and road tested steel extension for installing your oil pressure sending unit. Part shipped normally will not be as clean as the one pictured, we strongly suggest cleaning the inside oil passage prior to installation, it is a used part. Fits all 289, 302, 351W, 390, 427, 428CJ engines. Several versions found on this item. Steel and aluminum construction. We have both in the bin. Please note that the 351C or 351 Cleveland engine has the it's...

$0 Price: $150.95

Buy Details

Availability: In-Stock Item
Item #: 15047 -

Early production brake lines were routed 'over' the steering column.

$0 Price: $113.75

Buy Details

Availability: In-Stock Item
Item #: 15040 -

Early production brake lines were routed 'over' the steering column.

$0 Price: $113.75

Buy Details

Availability: In-Stock Item
Item #: 15038 -

Late production brake lines were routed under the steering column.

$0 Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 42391 -

Full driver (left hand) side front frame rail measures 52" long and the outer rail has weld nuts installed for proper installation.

$0 Price: $128.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0352 -

Bare outer tube for the 1967 Cougar or Mustang tilt steering column. This item will be free of major rusting and will have to be painted to match your car. Keep in mind that these tubes are specific to each year. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. Check out this video ...

$0 Price: $180.05

Buy Details

Availability: In-Stock Item
Item #: 31608 -

This listing is for the outer wheel house on a 1967 or 1968. Often when you replace the skin you will find multiple soft spots in the outer wheel house, especially down low. If you do not want to pay the oversized shipping on these large items we do sell patch panels.We also sell these as a complete set of four, which will save you money on shipping as we unbox them and nest all four together and fit them in one box. ...

$0 Price: $180.05

Buy Details

Availability: In-Stock Item
Item #: 31609 -

This listing is for the outer wheel house on a 1967 or 1968. Often when you replace the skin you will find multiple soft spots in the outer wheel house, especially down low. If you do not want to pay the oversized shipping on these large items we do sell patch panels.We also sell these as a complete set of four, which will save you money on shipping as we unbox them and nest all four together and fit them in one box. ...

$0 Price: $29.88

Buy Details

Availability: In-Stock Item
Item #: 31623 -

This listing is for the outer wheel house upper patch for the driver side of your 67-68. 

$0 Price: $29.88

Buy Details

Availability: In-Stock Item
Item #: 31624 -

This listing is for the outer upper wheel house patch for the passenger side of your 67-68.  

$0 Price: $180.05

Buy Details

Availability: In-Stock Item
Item #: 31615 -

This listing is for outer wheel house lower patches, front and rear for the driver side of your 67-68. There is no cost savings on the purchase price, but often people only need the lower section and shipping these (especially overseas) can be cost prohibitive. Since we cut these in house you can request where we cut if you would like a custom cut different than what is pictured here.

$0 Price: $180.05

Buy Details

Availability: In-Stock Item
Item #: 31616 -

This listing is for outer wheel house lower patches, front and rear for the passenger side of your 67-68. There is no cost savings on the purchase price, but often people only need the lower section and shipping these (especially overseas) can be cost prohibitive. Since we cut these in house you can request where we cut if you would like a custom cut different than what is pictured here.

$0 Price: $23.65

Buy Details

Availability: Out of Stock
Item #: 13795 -

Reproduction overhead console bracket for the Mercury Cougar or Ford Mustang. This is a decent part, but not as good as the original FoMoCo part we offer.