Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1681-1728 of 5084
Price: $448.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15007 -

Used grade "A" passenger side (right hand) grill section for the Mercury Cougar. 1967 is unique from the 1968 grille in a couple of ways, but the most noticeable is the upper mounting tab where it bolts to the grille center. 1968 had a more durable reinforced casting in this area. This grille half has been carefully inspected and found to be free of large cracks, has good chrome with no pits or major scratches and is not severely warped.  Hairline cracks will be present in the area of the...

Price: $248.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27064 -

Used passenger side (right hand) grill section for the Mercury Cougar. 1967 is unique from the 1968 grille in a couple of ways, but the most noticeable is the upper mounting tab where it bolts to the grille center. 1968 had a more durable reinforced casting in this area. This grille half has been carefully inspected and found to be free of pits or major scratches in the chrome and is not severely warped. It will have a misalignment issue as they all do in the portion on the outer most corner...

Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30235 -

Used grade "C" Passenger side (right hand) grille section for use as a patch for those with a break in the section that continues to the fender. Watch the video below to see how to fix your current grille and save a lot of money. Check out our video on grille repair below: ...

Price: $55.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0317 -

Good used grommet that seals the heater hoses and A/C lines where they pass through the firewall on the passenger side. This part will not have any missing "chunks" but will show hairline cracks most evident where the heater core tubes pass through. The engineering number imprinted on the back side of this grommet taken from a 1967 Cougar is C7ZA-19B588-A. Good through mid year 1969. Compare to the 1970 item pictured for selection on your late 1969 Cougar.Please indicate in the Order Notes...

Price: $43.65

Buy Details

Availability: In-Stock Item
Item #: 32255 -

Premium reproduction rubber grommet that seals the heater hoses and A/C lines where they pass through the firewall on the passenger side. Molded rubber exactly like the original! Other reproductions on the market are die cut from sponge rubber sheets and nothing like the original. * Note - Used starting during the early part of 1969. Compare the evaporator line orientation for both years. ...

Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 18734 -

Reproduction rubber grommet for the air conditioning case. This grommet encloses the tubes for the evaporator, and slides into a slot on the heater box. Fits 1967-1969 Mercury Cougar and Ford Mustang. 1969 owners, please compare your grommet to the picture, late 1969 changed to a triangle shaped grommet. Please see related items for late 1969-73 rubber grommet. Replaces Ford part number C7ZZ-19B552-A. Check out our videos below on how to replace a heater core! We now have separate videos for...

Price: $2.85

Buy Details

Availability: In-Stock Item
Item #: 20698 -

Brake line rubber grommets for any 1967-73 Mercury Cougar or Ford Mustang. These are the ones that go through the shock towers for the front brake lines. Drum or disc, all the same. Sold as a PAIR. Ford number 373624-S.

Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 31718 -

Reproduction grommet that seals the check valve to the Midland brake booster on the 67 - 68 Cougar or Mustang. We also sell the grommet / check valve combo, you can find it here.

Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 26564 -

Reproduction 5/16" fuel line to side apron grommet for the Mercury Cougar or Ford Mustang.Replaces Ford part # C5ZZ-9288.

Price: $3.15

Buy Details

Availability: In-Stock Item
Item #: 10106 -

This is the 1.37" X 1.66 X .31 plastic grommet that goes inside the trunk to protect the trunk wires from rubbing the edges of the sheet metal body. This grommet was also used for the hood light wiring under the hood.

Price: $5.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30457 -

Used grommet for protecting the trunk light wiring as found on 1967-70 Mercury Cougar and Ford Mustangs. Ford part number C4AB-14603-A.

Price: $11.88

Buy Details

Availability: Out of Stock
Item #: 30660 -

Used firewall grommet which your under hood harness runs through. This grommet is the same for Standard and XR7.

Price: $5.05

Buy Details

Availability: In-Stock Item
Item #: 11973 -

Reproduction hose grommet for the windshield washer pump through the firewall. Good product, will work with original hoses. Replaces Ford part number C7ZZ-17545

Price: $59.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0318 -

Original two piece assembly that bolts to the passenger side of your firewall on A/C equipped Cougar's. Comes as taken from parts car. If you own a 1969 Cougar you will need to look at the configuration of the evaporator lines. During the 1969 model year this grommet bracket changed to reflect the running year change. It will look like the 1970 pictured bracket.Ford part # C7ZA-19B589-A.

Price: $1.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33304 -

This was used on both Standard and XR7 models.Includes mounting nut.

Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31813 -

This brass connector screws to the dash structure and serves as a ground point for the instrument cluster wiring harness. See photo above as a reference of connection point. Good for both Standard and XR7 67 - 68 Cougars.

Price: $8.05

Buy Details

Availability: In-Stock Item
Item #: 20684 -

Hard to find little detail item that is often times missing. Correct for Ford Mustang as well. According to the 1968 Cougar Electrical Assembly Manual on page #57, the cowl ground strap is called the "Strap Radio Receiver Hood Bonding." Ford part # C5AA-18870-A

Price: $25.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23463 -

Hard to find little detail item that is often times missing. Correct for Ford Mustang as well. According to the 1968 Cougar Electrical Assembly Manual on page #57, the cowl ground strap is called the "Strap Radio Receiver Hood Bonding." Ford part # C5AA-18870-A, the screw carries a part # of 380923.

Price: $22.73

Buy Details

Availability: In-Stock Item
Item #: 30416 -

Reproduction concours correct firewall ground wire for the Mercury Cougar. For use on 289 / 302 / 351 engines. Will not work on 390 / 428 engines. You can find the big block version here. This strap features the correct part number and markings. It is little details like this that will often separate 1st and 2nd place at the show. ...

Price: $195.30

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32922 -

This complete set of grille bars have been chemically dipped to remove the chrome and are ready to be painted black for your 1967 - 1968 Resto-Mod or 1968 GTE. Keep in mind when an item is chromed, the layer or layers of copper plating act as a primer to fill in minor imperfections. You will have some prep time involved before these are paint ready. We hand select premium parts that have minimal defects.If you send cores in for exchange they must be pit free and no scrapes so as to qualify for...

Price: $145.67

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32923 -

This pair of tail light bezels have been chemically dipped to remove the chrome and are ready to be painted black for your 1967 - 1968 Resto-Mod or 1968 GTE. Keep in mind when an item is chromed, the layer or layers of copper plating act as a primer to fill in minor imperfections. You will have some prep time involved before these are paint ready. We hand select premium parts that have minimal defects.  If you send cores in for exchange they must be pit free and no scrapes so as to...

Price: $49.15

Buy Details

Availability: In-Stock Item
Item #: 20582 -

Features 274 pages / 750 photos/ 12,300 items / history / finishes / measuring and more. This book provides detailed information about the fasteners specified in assembly manuals and parts books. All 12,300 fasteners are referenced to a photo! Must have for anyone wanting to correctly put together a 1955-1973 FoMoCo product.

Price: $96.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15551 -

This direct replacement H pipe only for any 1967-68 Mercury Cougar or Ford Mustang equipped with either the 289 or 302 engine and stock cast iron exhaust manifolds. These units are manufactured right here in the good old USA from 2 inch aluminized pipes and made from original 1967 and 1968 Cougars and Mustangs. We also sell this H pipe in a 2-1/4 inch diameter and have OEM style dual exhaust systems that include the H pipe, mufflers, and tail pipes.*NOTE* Please allow 2 - 3 weeks for delivery. ...

Price: $96.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15554 -

This direct replacement features a larger than stock diameter of 2-1/4 inches for increased performance. This is the H pipe only and is for any 1967-68 Mercury Cougar or Ford Mustang with stock cast iron exhaust manifolds. These units are manufactured right here in the good old USA from 2-1/4 inch aluminized pipes and made from original 1967 and 1968 Cougars and Mustangs with either the 289 or 302 engine. We also sell this H pipe in a 2 inch diameter and have OEM style dual exhaust systems...

Price: $96.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15555 -

Direct replacement H pipe only for any 1967-68 Mercury Cougar or Ford Mustang with stock cast iron exhaust manifolds that includes the spacer valve on the passenger side. These units are manufactured right here in the good old USA from 2 inch aluminized pipes and made from original 1967 and 1968 Cougars and Mustangs with either the 390 or 427 engine. We also sell this H pipe in a 2-1/4 inch diameter and have OEM style dual exhaust systems that include the H pipe, mufflers, and tail...

Price: $96.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 15556 -

This direct replacement features a larger than stock diameter of 2-1/4 inches for increased performance. This is the H pipe only and is for any 1967-68 Mercury Cougar or Ford Mustang with stock cast iron exhaust manifolds that includes the spacer valve on the passenger side. These units are manufactured right here in the good old USA from 2-1/4 inch aluminized pipes and made from original 1967 and 1968 Cougars and Mustangs with either the 390 or 427 engine. We also sell this H pipe in a 2 inch...

Price: $1.25

Buy Details

Availability: In-Stock Item
Item #: 13086 -

New hairpin clip for attaching the brake light switch to the brake pedal. This clip was also used to attach the clutch rod to the clutch pedal on manual transmission cars. Fits all years 1967-73, Ford and Mercury.Replaces Ford part number 380699-S.

Price: $200.75

Buy Details

Availability: In-Stock Item
Item #: 30086 -

Reproduction halogen headlight conversion kit. Included in this kit are the four halogen headlight bulbs (2 high and 2 low) and the mini-relay kit, which is needed when installing halogen bulbs on your 67 - 68 Cougar. The 55 Watt Xenon Halogen H4/9003 bulbs included in this kit are "cool white" which have a bit of a blueish tint, like you see on modern cars. If you would like to go with a more original "natural white" color, you can buy these inner replacement bulbs. This kit comes with the...

Halogen Replacement Headlight Bulb - Clear - Repro ~ 1967 - 1973 Mercury Cougar
Does not fit stock Cougar applications, only works with Halogen upgrade kits. 0
Price: $4.15

Buy Details

Availability: In-Stock Item
Item #: 30101 -

Reproduction replacement halogen bulb for your headlights. This is a clear bulb, "natural white" alternative to the "cool white" bulbs included in our halogen headlight conversion kit. 55 Watt Xenon Halogen H4/9003 bulb. Sold Individually.

Price: $49.85

Buy Details

Availability: Out of Stock
Item #: 33104 -

NOS emergency / parking brake handle.  To remove your old handle break the plastic off of the shaft to reveal the splined pin. Pull out pin with vise grips and install the new unit.

Price: $8.05

Buy Details

Availability: In-Stock Item
Item #: 41970 -

This reproduction emergency / parking brake handle is an exact reproduction that is made from quality materials and is less prone to cracking than your original. That being said, these still will crack if you pull hard and do not have your hand close to the shaft.  This was a design flaw from day one.  The correct way to apply the brake to reduce the chances of these handles cracking is to split your fingers around the shaft when applying the brake, keeping your fingers close to the...

Price: $92.39

Buy Details

Availability: In-Stock Item
Item #: 11370 -

Must have for 69-70 convertible owners or anyone else who wishes to tighten up the notoriously weak front inner structure of the 67-70 Cougar / Mustang. All three of these easy to install upgrades are outlined in the BOSS 302 Chassis Modification book that is NOT included in this package. After you install this kit you will wonder how you could have possibly lived this long without it. Even if you already have the one piece export brace, the chances are it is the old ill fitting off-shore...

Price: $113.99

Buy Details

Availability: In-Stock Item
Item #: 31835 -

Must have for 69-70 convertible owners or anyone else who wishes to tighten up the notoriously weak front inner structure of the 67-70 Cougar / Mustang. All three of these easy to install upgrades are outlined in the BOSS 302 Chassis Modification book that is NOT included in this package. After you install this kit you will wonder how you could have possibly lived this long without it. Even if you already have the one piece export brace, the chances are it is the old ill fitting off-shore...

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24176 -

Bracket and insulator that mounts to the body and the left side of the factory transverse muffler. All 289 engine applications. Ford part number C7WY-5260-A or  C7WY-5260-B. *Trivia - All 1967 Cougars with 289 engines had a single exhaust from the factory. Both the C code 289-2V and A code 289-4V.  

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24177 -

Bracket and insulator that mounts to the body and the right side of the factory transverse muffler. All 289 engine applications. Ford part number C7WY-5260-B.

Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24179 -

Mounts to the frame on the left side of the fuel tank. Supports and holds the rear of the tailpipe stationary. Ford part number C7WY-5260-D.

Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24178 -

Mounts to the frame on the right side of the fuel tank. Supports and holds the rear of the tailpipe stationary. Ford part number C7WY-5260-C.

Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24275 -

Mounts to the rear of a 'turbo' style muffler. Left side bracket. Ford part number C7ZZ-5A246-F.

Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24276 -

Mounts to the rear of a 'turbo' style muffler. Right side bracket. Ford part number C7ZZ-5A246-G.

Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19099 -

The 289 used a transverse muffler with hangers on either end and dual exhaust was not an option. The 289 Cougars for 1967 also did not use a tail pipe hanger like their 390 brethren did, the tail pipes were free hanging. We have observed in the many 1967 parts cars in our yard that many Cougars have had an after market tail pipe hanger installed at some point. Many Cougars have a hanger welded or bolted to the passenger side tie down bracket.

Price: $314.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19012 -

Includes the two muffler (aka resonator) hangers and two tail pipe hangers. Only the 390 got tail pipe hangers in 1967, the 1967 289 had muffler hangers only and dual exhaust was not an option on a 1967 289 equipped Cougar, even if it were an "A" code 289 4V. Will not be overly rusty and will have decent rubber still intact. We cannot guarantee that the mounting hardware will be included as shown on the resonator brackets.

Price: $13.15

Buy Details

Availability: In-Stock Item
Item #: 11077 -

Muffler mounting tabs for using factory Ford muffler hangers on aftermarket turbo style exhaust mufflers. These help achieve that concours look using a replacement muffler or mufflers. We recommend using your existing horse shoe shaped muffler hanger as a jig for locating these tabs prior to welding. These were copied from the original style tabs found on most 1968-73 Mercury Cougar and Ford Mustangs. 1967 cars and some Mustangs used a single transverse muffler behind the rear axles, these may...

Price: $48.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19177 -

This used bracket kit is what is needed to mount the headlight vacuum storage tank inside the front of the driver side front fender. This kit differs from the 1970 kit only in the slightly different design of fasteners used.

Price: $258.33

Buy Details

Availability: Discontinued
Item #: 31678 -

Rebuilt early 289 harmonic balancer. or crank shaft dampener. C3AE-6316-G Cast iron construction with key way groove. Has the timing marks and date on rim. This one is dated L3, or November 1963. Application is late 1963 and early 1964 Ford or Mercury 289-2V or 289-4V engines. No core required, this was an oops on our part. 100% rebuilt by local reputable rebuilder. *Note - Not for the K code 271Hp 289 HiPo engines. Click on images to enlarge. This is a picture of a 40 year old piece...

Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 23837 -

C5AE-6316-A All 1967 and 1968 Mercury Cougar includes both C code 289-2V and A code 289-4V engines. 1967 and 1968 only, 6-5/16 inches in diameter, 3/4 inches thick, cast iron construction with key way groove. Has the timing marks on rim. Refundable $50.00 core charge when rebuildable C5AE-6316-A harmonic balancer is received by WCCC. *Note - Not for the K code 271Hp 289 HiPo engines.We don't offer that one because Ford never installed that engine in any Cougar. We can offer the rebuilding...