Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 625-672 of 5084
Price: $16.75

Buy Details

Availability: In-Stock Item
Item #: 41809 -

Keeps proper tension on emergency / parking brake cable by taking up the slack when the brake is off. Hook attaches to the bracket under the passenger side floor. Replaces Ford Part # C7ZZ-2A808-A.

Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27487 -

Keeps proper tension on emergency / parking brake cable by taking up the slack when the brake is off. Hook attaches to the bracket under the passenger side floor. Replaces Ford part # C7ZZ-2A808-A.

Price: $30.05

Buy Details

Availability: In-Stock Item
Item #: 14364 -

Reproduction heater cable set for your beloved Cat or Pony. This set is an exact fit! Replaces Ford part # C7ZZ-18518-A. *Customer Feedback*     "My first deal with Don was clear back in the 1980's and I have sent a few people his way and all came away happy. While at his shop on Monday I watched Lin crawl under a convertible, phone in one hand and a tape measure in the other and measure a cross member, or drive shaft or? All in the spirit of customer service. In my opinion you...

Price: $18.85

Buy Details

Availability: Rare / NOS Part
Item #: 33049 -

Sold as a pair. These often become dislodged due to the force required to be applied after they have rusted in place for decades. Located at the bottoms of the fenders.Ford part number 359613-S2.

Price: $9.75

Buy Details

Availability: In-Stock Item
Item #: 13922 -

Sold as a pair. These often become dislodged due to the force required to be applied after they have rusted in place for decades. Located at the bottoms of the fenders.

Price: $170.25

Buy Details

Availability: In-Stock Item
Item #: 13631 -

Reproduction Kelsey-Hayes major 4 piston repair kit for your 67 Cougar.Included in this kit are: 4 New pistons, 4 piston boots, 4 piston seals, crossover seals and 1 bleeder screw.

Price: $39.95

Buy Details

Availability: Out of Stock
Item #: 13630 -

Reproduction Kelsey-Hayes simple caliper repair kit. Included in this kit are: 4 piston boots, 4 piston seals and 1 bleeder screw.

Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 10094 -

Specific to 1967 Cougars and Mustangs, used to mount stock 4 piston calipers. Sold individually by side so don't forget to go over and grab the passenger side bracket by clicking here. Replaces For part number C7OZ-2B135-A.

Price: $73.89

Buy Details

Availability: Out of Stock
Item #: 12420 -

Used driver side (left hand) disc brake caliper mounting bracket that is a unique and one year only bracket for mounting the Kelsey Hayes twin piston caliper to the 1967 Cougar brake spindle. Tough parts to find in rebuildable condition. We won't always have them in inventory as singles unless we have multiples of these extra brackets for one side or the other. Ford part # C7OZ-2B135-A.

Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 10093 -

Specific to 1967 Cougars and Mustangs, used to mount stock 4 piston calipers. Sold individually by side so don't forget to go over and grab the driver side bracket by clicking here.Replaces Ford part number C7OZ-2B134-A.

Price: $90.95

Buy Details

Availability: In-Stock Item
Item #: 31336 -

Specific to 1967 Cougars and Mustangs, used to mount stock 4 piston calipers.  Sold as a pair, hardware not included. Replaces Ford part numbers:  C7OZ-2B134-A and C7OZ-2B135-A

Price: $12.55

Buy Details

Availability: In-Stock Item
Item #: 10837 -

Reproduction disc brake caliper transfer tubes for your 1967 Mercury Cougar or Ford Mustang. Includes both left and right lines.

Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 13923 -

Great Reproduction of an Often Broken Part. This part fits on the bottom of the steering wheel and must be in place to cancel your turn signal on tilt column cars. Used on all Ford products with a tilt column 1967-69. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here...

Price: $24.89

Buy Details

Availability: Out of Stock
Item #: 15-0016 -

Factory original turn signal canceling cam. Originals were molded in white, reproductions are molded in black. Repros also available from us. Without this part that self attaches to the back of your factory steering wheel, you will be turning off your blinkers manually. Click up, click down... *NOTE* We have no good reason to encourage you to purchase this hard to find original over the reproduction, unless you just gotta have it. **NOTE** Need help diagnosing a Cougar turn signal problem?...

Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0052 -

Used cap for the index lever tension spring for the Mercury Cougar or Ford Mustang equipped with the tilt/tilt away steering column. Two required per car.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

Price: $20.57

Buy Details

Availability: In-Stock Item
Item #: 14237 -

Reproduction disc brake master cylinder cap in gold cadmium for the Mercury Cougar or Ford Mustang. We have compared this cap to our originals, and the stamping does not match any of our originals, but the manufacturer claims that the scripting is correct. Also available in chrome!  This cap will only fit master cylinder part# 15298Replaces Ford part # C7AZ-2162-B. Fits: 1967 Mercury Cougar1968 Mercury Cougar 1969 Mercury Cougar 1970 Mercury Cougar 1971 Mercury Cougar 1972 Mercury Cougar...

Price: $28.95

Buy Details

Availability: In-Stock Item
Item #: 10797 -

Reproduction chrome master cylinder cap for the Mercury Cougar or Ford Mustang equipped with drum brakes. This quality reproduction has the correct lettering and is correct for 1970-73 Cougars and Mustangs. However, it fits and looks good on all 1967-73 Cougars and Mustangs with other under hood chromed goodies. Will also work fit any other 1967-73 Ford drum brake dual reservoir master cylinders.Replaces Ford part # C7AZ-2162, C9AZ-2162, and D3AZ-2162.*Customer Feedback from Mercurycougar.net*"...

Price: $27.35

Buy Details

Availability: Out of Stock
Item #: 25926 -

Due to the vulnerable location of the control valve these often get cracked or worn through from rubbing on other components. Fits most all Ford passenger cars 1962-1970. Replaces Ford part number C2AZ-3C705-B

Price: $229.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 22567 -

We're pleased to offer a 5 layer car cover that is composed of the thickest and most reliable fabric available in today's market. With the most technologically advanced material, this cover is guaranteed to protect your car from extreme weather conditions such as heavy rain, snow, ice, sun and wind. This heavy-duty, 100% waterproof cover insures perfect protection all-year-round for both indoor and outdoor use. It features three bonded layers of polypropylene, a micro-porous film layer...

Price: $29.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33089 -

Car Craft Magazine, August 1967 Quickest Cat in Cougar Country issue. Features a 4 page article on the 1967 Mercury Cougar. Previous owner may have tried to use the centerfold for a poster, a few of the pages have been pulled away from the staples. These old magazines are just plain fun to read, and of course, all the usual fun and eye catching classic ads common in early year magazines. Condition is moderately used. Articles in this issue: Snow white and the seven dwarfs NHRA'sCar...

Price: $59.85

Buy Details

Availability: Rare / NOS Part
Item #: 33060 -

NOS Car Life Magazine Volume 13, No. 9 from October 1966. Kept in a plastic sleeve for it's entire life, this issue is in immaculate condition. The front cover is graced by a beautiful red 1967 Cougar and the article on page 38 titled "A Cat Called Cougar" dives deep into the secret plan of the Lincoln-Mercury personnel to unleash the Mercury Cougar on the automotive world. It also details specs such as 15% better ride over the Mustang and it's "radical innovations" that were...

Price: $594.77

Buy Details

Availability: In-Stock Item
Item #: 32111 -

Reproduction polished aluminum 600 CFM "Street Warrior" carburetor for the 67 - 73 Cougar or Mustang. Replaces Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. Performance upgrade for stock to mildly modified V-8 enginesCalibrated for excellent street performance right out of the boxFactory preset electric choke for easy startupsVacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing &...

Price: $304.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24024 -

1967 289-4V Autolite 4300 carburetor, Automatic C4 transmission- 49 states. C7DF-AF stamped on the carburetor base, 1.00" venturi size and 470 cfm. Core carburetor with proper numbers, we don't always have the factory Ford Autolite tag that was affixed to the top. PCV spacer plates also available and required for stock air cleaner clearance on top of engine. A code 289-4V engine. *Note not for DSO 52 and DSO 53 California destined cars.

Price: $193.86

Buy Details

Availability: Out of Stock
Item #: 24035 -

1967 289-4V Autolite 4300 carburetor, Automatic C4 transmission- California  C7DF-D or  C7DF-AH stamped on the carburetor base, 1.00" venturi size and 470 cfm. Core carburetor with proper numbers, we don't always have the factory Ford Autolite tag that was affixed to the top. PCV spacer plates also available and required for stock air cleaner clearance on top of engine. A code 289-4V engines with automatic transmissions. *Note - For DSO 52 and DSO 53 California destined cars. ...

Price: $341.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24059 -

1967 390-4V Holley 4150 carburetor, automatic C6 transmission - 49 states. C70F-9510-B stamped on the carburetor air horn, Holley list #3794, 600 cfm. Core carburetor with proper numbers, we don't always have the factory Ford Autolite tag that was affixed to the top. S code 390-4V and 390GT engines with automatic transmissions. *Note not for DSO 52 and DSO 53 California destined cars.

Price: $386.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24058 -

1967 390-4V Holley 4150 carburetor, 3 or 4 speed manual transmission - 49 states. C70F-9510-A stamped on the carburetor air horn, Holley list #3793, 600 cfm. Core carburetor with proper numbers, we don't always have the factory Ford Autolite tag that was affixed to the top. S code 390-4V or 390GT engines manual transmissions.. *Note not for DSO 52 and DSO 53 California destined cars.

Price: $550.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33575 -

New Street Avenger carburetor. The 350 CFM Street Avenger carburetor has great features such as optimized street calibrations...two vacuum ports for all necessary vacuum accessories, factory preset electric choke for easy startups, built-in fuel filters; and an included 3/8" fuel line connection so there are no unnecessary trips back to the parts store. Known to bolt in right out of the box. The Avenger series are the first carburetors to have a limited lifetime warranty. With a great...

Price: $40.25

Buy Details

Availability: In-Stock Item
Item #: 10482 -

Basic kit for rebuilding your Ford Autolite or Motorcraft 2100 or 2 barrel carburetor. Covers all factory 2 barrel carburetors on any 1967-73 Mercury Cougar and Ford Mustang with Autolite or Motorcraft 2100 carburetors. Excludes later 2150 carburetors.

Price: $32.75

Buy Details

Availability: In-Stock Item
Item #: 18906 -

Carburetor idle mixture screw caps like originally came on the cars from the factory. Exact reproduction of Ford part number C7AZ-9J500-A. This clip onto the idle mixture screws of any 1967-73 Autolite or Motor Craft carburetor 2100 or 4300. They also will fit the 429 Cobra Jet with Ford numbered Rochester Quadrajet carburetors in 1970-71. Sold as a PAIR.

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 33169 -

5/16-24 hex nut 7/16" head that is used to secure the carburetor to the intake manifold. If you need to replace your rusty old studs, we also carry an eight piece kit that contains the studs and nuts. Sold individually. AMK B-12786

Price: $3.00

Buy Details

Availability: In-Stock Item
Item #: 53278 -

This is a set of four 7/16 nuts that are used to secure the carburetor to the intake manifold. If you need to replace your rusty old studs, we also carry an eight piece kit that contains the studs and nuts. 

Price: $12.60

Buy Details

Availability: In-Stock Item
Item #: 53277 -

This is the complete eight piece kit that includes four 7/16 nuts and four studs (1 3/8") which are double threaded. One end is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with NO spacer.

Price: $12.05

Buy Details

Availability: In-Stock Item
Item #: 53274 -

This is the complete eight piece kit that includes four 7/16 nuts and four double threaded studs (2 1/2"). One end of the stud is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with a 1" spacer.

Price: $9.25

Buy Details

Availability: In-Stock Item
Item #: 53275 -

This is the complete eight piece kit that includes four 7/16 nuts and four double threaded studs (1 3/4"). One end of the stud is fine threaded to accommodate the installation nuts, and the other end has the course threads needed to screw into the intake manifold. This is the kit used to install carbs with 1/4" to 3/8" spacers.

Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23814 -

Factory cast aluminum two barrel carburetor spacer plate. Positions carburetor above intake manifold for proper linkage operation. With PCV fitting at rear. Fits all Ford 2 barrel carburetors, bore size is 1-5/8 inches in diameter. ...

Price: $81.85

Buy Details

Availability: In-Stock Item
Item #: 11231 -

Nice quality reproduction of the bake-o-lite carburetor spacer plate for all 1966-67 S-code 390-4V engines. Measures 0.28" thick, with small vacuum hose nipple on rear replaces Ford Part Number C6AZ-9A589-B. Fits 67 Cougar 390 Fits 67 Mustang 390 Fits 66 Fairlane 390 Fits 67 Fairlane 390 Fits 66 Cyclone 390 Fits 67 Cyclone 390 Check out the very first Cougar in our video below! ...

Price: $128.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23928 -

Measures 0.28" thick, with small vacuum hose nipple on rear Ford Part Number C6AZ-9A589-B. Mint condition original part.

Price: $50.95

Buy Details

Availability: In-Stock Item
Item #: 41875 -

Good Quality spacer that measures 1 1/8" tall. Comes with PCV hose clamp and vacuum port cap. This was used on all 289, 302, 351w motors with a 4V carburetor.

Price: $60.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23830 -

Factory cast aluminum four barrel carburetor spacer plate, one inch tall. Positions carburetor above intake manifold for proper linkage operation. With PCV fitting at rear. *excludes Boss 302 Eliminator ...

Price: $2.15

Buy Details

Availability: In-Stock Item
Item #: 11811 -

New 390 2BBL Carburetor spacer gasket for the 1968 X code 390-2V engine. Two needed per installation, one on both sides of the spacer plate.

Price: $4.65

Buy Details

Availability: In-Stock Item
Item #: 15292 -

New carburetor gasket for 67 - 70 Cougar or Mustang with 390 or 428 cobra jet engines and Ford numbered Holley carburetors. One or two needed per installation (with or without spacer plate) sold individually.