Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1921-1968 of 5073
MSRP:$34.95
$34.95 Price: $29.05

Buy Details

Availability: In-Stock Item
Item #: 41893 -

Connects PCV valve to PCV transfer tube on the 390, 427-4V, and 428CJ. Inside diameter on one end is .45" the other end is .58". These should be tough to get on so that they will form a vacuum seal. Originally held on with wire clamps, we have those available here  Replaces Ford Part #: C8AZ-6A664-D. Fits Many 1966, 1967, 1968, 1969, and 1970 Mercury Monterey, Marquis, Ford Galaxie, with FE 390 Big Block Engines. We aren't sure why this hose was reproduced as shown. However it will...

MSRP:$29.99
$29.99 Price: $19.31

Buy Details

Availability: In-Stock Item
Item #: 41969 -

This hose is the hose most Mustang / Cougar parts vendors offer. It is a rubber flex hose with economy fittings. Two required per vehicle, sold individually. We do not recommend these hoses and can not stand behind them as they often will leak if not torqued to the proper specs. Use caution when tightening these down as they are susceptible to stripping if you torque them to the specs called for by FORD. Replaces Ford Part #: C6OZ-3A714-A or C6OZ-3A717-A. ...

$0 Price: $99.95

Buy Details

Availability: In-Stock Item
Item #: 14295 -

These are economy replacement hoses by Scott Drake. Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. One piece design, meaning it differs from the original separate two piece pressure hose set. Upper and lower pressure hoses were what came on the cars originally. This hose is the hose most Mustang / Cougar parts vendors offer. It is a rubber flex hose with economy fittings. Use caution when tightening these down as they are susceptible to stripping if you...

$0 Price: $34.97

Buy Details

Availability: In-Stock Item
Item #: 14082 -

These are economy replacement hoses by Scott Drake. Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. This hose will work as a return line for either a small or big block 1967 - 1970. This hose is designed for a 2 piece return line application, so to make it work you will need to also purchase a chunk of generic hose. This is needed to connect this hose to your power steering pump.  Depending on the routing of your hoses you will need a different...

$0 Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33156 -

Used smog hose. Connects the smog pump to the check valve. 1967 Mercury Cougar and 1967 Ford Mustang with C and A code 289 engines, and typical California Thermactor smog system. Hose only, no clamps included. Hose is about 30 inches long with a 90 degree bend. Inside diameter is 3/4 inch. Ford part number C6OE-9H548-F.

$0 Price: $49.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33155 -

Used smog hose. Connects the metal "T" connector to the check valve. 1967 Mercury Cougar and 1967 Ford Mustang with C and A code 289 engines, and typical California Thermactor smog system. Hose only, no clamps included. Hose is about 19 inches long with a 90 degree bend. Inside diameter is 3/4 inch. Ford part number C7OE-9H534-A.

$0 Price: $17.27

Buy Details

Availability: In-Stock Item
Item #: 10365 -

Rubber bypass hose for 1967 Mercury Cougar with 289 engine. Additionally for all Ford products including Mustang with 221, 260, and 289 engines from 1962-67. Ink stamped C2OE-8597-A in white ink as shown.

$0 Price: $17.27

Buy Details

Availability: In-Stock Item
Item #: 14032 -

Water By-Pass Hose with Autolite® logo and part number imprinted in white ink. Stamped with C2OE-8597-A. Replaces Ford Part #: C7OZ-8597

MSRP:$8.00
$8.00 Price: $6.85

Buy Details

Availability: In-Stock Item
Item #: 26580 -

The 1967 - 1968 windshield washer kit varies slightly from the 1969 - 1970. Replaces Ford part #: C7ZZ-17543.

$0 Price: $65.55

Buy Details

Availability: In-Stock Item
Item #: 32172 -

Reproduction brackets to hold the junction of the steel brake line and the rubber brake hose. Mounts to the frame rail. Fits 1967 Mercury Cougar and 1965 - 1967 Ford Mustang with factory installed Kelsey Hayes 4 puck disc brakes only. These are manufactured 30 thousandths thicker to compensate for the missing flange that the originals had along the sides.  Replaces Ford part numbers C5ZZ-2082-D and C5ZZ-2082-C

$0 Price: $12.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30059 -

Used front drum brake hose bracket for any 1967-70 Mercury Cougar or Ford Mustang. Simple bracket bolts to the front aprons and holds the brake hoses stationary. Right and left side are the same.Ford part number C1SS-2082-C.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 12865 -

Reproduction 1/2" hose clamp, commonly used on the fuel lines. This clamp is smaller than the ones used on the power steering return line.

$0 Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20195 -

Used to mate the headlight vacuum hoses together at the front cross beam under the core support. Notice it still has the remnant of green paint used to identify where the color coded hoses are to be placed. Cougar part number C7SZ-13A169-A.

$0 Price: $9.85

Buy Details

Availability: In-Stock Item
Item #: 25929 -

Power Steering hose bracket insulator for both the small and big block brackets for the 1967 - 1970 Mercury Cougar and Ford Mustang. Replaces Ford part #: C7ZZ-3A609-A or C7ZZ-3609. Customer feedback found at mercurycougar.net: Boy service is just not the same as the "good old"? days. I ordered a half a trunk load of parts and pieces from West Coast Classic Cougar and about 2 hours later got a phone call informing me that the order was picked and shipped. What are things coming to? Where is...

$0 Price: $129.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15491 -

This used original, color coded set of vacuum hoses is 100% complete and relatively pliable. It comes complete with decades of dirt and grime (patina) for no extra charge. If you want to remove the grime it will take some serious elbow grease but it can be done. The color coded stripes are quite resilient to cleaning as the ink used actually embedded itself into the rubber. "I found a good way to remove 50 years of crud. Soak the lines in hot water and dawn dish soap for a bit then take a...

$0 Price: $129.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15490 -

This used original, color coded set of vacuum hoses is 100% complete and relatively pliable. It comes complete with decades of dirt and grime (patina) for no extra charge. If you want to remove the grime it will take some serious elbow grease but it can be done. The color coded stripes are quite resilient to cleaning as the ink used actually embedded itself into the rubber. If you have a tried and true method of cleaning these hoses let us know and if it sounds good we will post it here!NOTE:...

MSRP:$210.00
$210.00 Price: $190.55

Buy Details

Availability: Out of Stock
Item #: 11651 -

This is the 1967- 1968 retrofit or re-route hose kit! The tubing bends are all "spot on" and the portion that passes through the rubber insulator are identical to NOS for 1969. You will not find these at your local auto parts store or the the "Mustang Discount" folks. These hoses will also work on a 1967 or 1968 5/16" control valve fitting if it is routed the same as the big block. You will need to purchase the power steering hose bracket for the big block in order to make it work. This is a...

$0 Price: $83.64

Buy Details

Availability: In-Stock Item
Item #: 19055 -

These are economy replacement hoses by Scott Drake. Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. This kit fits the 1967 with a 1/4" control Valve Pressure fitting. You might want to verify that your 67 has the 1/4" fitting as many have been upgraded the the 5/16" fitting. This hose is the hose most Mustang / Cougar parts vendors offer. It is a rubber flex hose with economy fittings. Use caution when tightening these down as they are susceptible to...

$0 Price: $69.89

Buy Details

Availability: In-Stock Item
Item #: 19242 -

These are economy replacement hoses by Scott Drake. Aftermarket type hoses without original Ford markings in most cases. Made in the U.S.A. This hose is the hose most Mustang / Cougar parts vendors offer. It is a rubber flex hose with economy fittings. Use caution when tightening these down as they are susceptible to stripping if you torque them to the specs called for by FORD. We do not recommend these hoses and can not stand behind them as they often will leak if not torqued to the proper...

$34.00 Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 15308 -

These are the best CONCOURSe radiator hoses on the market. All feature special white ink markings that have been designed to adhere to the hose under normal conditions, imprint will not come off even when in contact with antifreeze. They have imprints that are very crisp and authentic. Each imprint is CONCOURSe correct. Includes Authentic Logo. c7ze-8260-a and c7ze-82-86-a.

$0 Price: $31.45

Buy Details

Availability: In-Stock Item
Item #: 13970 -

Generic hose kit that will fit the 289 or 302 for those who are not concerned about the CONCOURS look. Used on both the 20" and 24" wide radiators Replaces Ford Part #'s C4ZE-8260-A and C4ZE-8286-A. For some helpful tips on upgrading your Cougar (or Mustang) cooling system, check out our video: ...

$0 Price: $98.35

Buy Details

Availability: In-Stock Item
Item #: 32623 -

New silicone radiator hoses for the 67 - 68 Cougar or Mustang with the 289 or 302 engine. The hoses are made with a sturdy black silicone, which will last longer than standard rubber hoses and has a higher burst pressure rating. Includes upper and lower radiator hose, and a bypass hose. To help enhance its performance, the lower hose is nylon-reinforced and comes with a stainless steel spring, which will keep this hose from collapsing and causing other problems. Used on both the 20"...

$0 Price: $100.95

Buy Details

Availability: In-Stock Item
Item #: 32624 -

New silicone radiator hoses for the 69 - 70 Cougar or Mustang with the 390 or 428CJ engine. The hoses are made with a sturdy black silicone, which will last longer than standard rubber hoses and has a higher burst pressure rating. Includes upper and lower radiator hose, and a bypass hose. To help enhance its performance, the lower hose is nylon-reinforced and comes with a stainless steel spring, which will keep this hose from collapsing and causing other problems. Replaces Ford...

$0 Price: $45.45

Buy Details

Availability: In-Stock Item
Item #: 41957 -

These are the best CONCOURS radiator hoses on the market. All made in the U.S.A. by Gates or Goodyear both suppliers to Ford Motor Co, also approved by Mustang Club of America. All feature special white ink markings that have been designed to adhere to the hose under normal conditions, imprint will not come off even when in contact with antifreeze. All have imprints that are very crisp and authentic. Each imprint is CONCOURS correct for the specific application year. Represented by an oval...

$0 Price: $30.55

Buy Details

Availability: In-Stock Item
Item #: 30759 -

Reproduction Concours correct windshield washer hose with ribbed outer wall. Hose is 101" and is cut-to-fit. Tee connector not included, you can find it here. You can find the nozzles here.

$0 Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20316 -

This hard plastic black cover, or shield, attaches just below the radiator and protects the headlight vacuum hoses that attach to the left and right headlight door actuators. This used part will be free of cracks but will be warped. With patience and heat they can be successfully massaged back to their original form. Must have detail item for a nicely restored early Cougar. For use on non-AC cars only. Replaces Ford part number C7WB-14A088-A.

$6.00 Price: $9.25

Buy Details

Availability: In-Stock Item
Item #: 41358 -

No, zip ties were not used from the factory to secure the AC hoses to the shock tower braces . . . Four required per car, sold individually. Replaces Ford part #: C7ZA-430.

$0 Price: $23.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33754 -

Housing or backing cover for the Standard Model 1967 Mercury Cougar. Housing for the instrument cluster, only on standard model Cougars for 1967. It is virtually the same as the 1968 version, but the stamped colors are different for the various gauges between the two years. We only save the best ones, those with excessive rust are scrapped. You may want to spray the inside with a reflective white paint and the rear with silver. Make sure that you have good grounds though. Ford part...

$0 Price: $23.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33755 -

Housing or backing cover for the Standard Model 1968 Mercury Cougar. Housing for the instrument cluster, only on standard model Cougars for 1968. It is virtually the same as the 1967 version, but the stamped colors are different for the various gauges between the two years. We only save the best ones, those with excessive rust are scrapped. You may want to spray the inside with a reflective white paint and the rear with silver. Make sure that you have good grounds though.  Ford part...

$0 Price: $42.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 21-0013 -

No rust or modifications, still has good white paint. The main difference between the 67 and 68 versions is the wiring color engravings on the backside are different between the two. Condition of the housing cannot be guaranteed. Ford casting number C7WF-10843-B Check out our video on dash removal and restoration: ...

$0 Price: $107.27

Buy Details

Availability: In-Stock Item
Item #: 31900 -

New front drum brake hub for all Mercury Cougars equipped with front drum brakes. Pretty much fits most front 5 lug 10 inch front drum brakes on all mid sized Ford and Mercury cars. Front drum brakes only. Fits 1967-69 Mercury Cougar and 1965-69 Ford Mustang with 5 lug 10 inch drums. Several manufacturers of the front drum assemblies such as Kelsey Hayes and Bendix were suppliers to Ford over the years. Quite a bit of labor to press these out. Needs threaded studs, see related...

$0 Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31887 -

Used front drum brake hub for all Mercury Cougars equipped with front drum brakes. Pretty much fits most front 5 lug 10 inch drum brakes on all mid sized Ford and Mercury cars. Front drum brakes only. Fits 1967-69 Mercury Cougar and 1965-69 Ford Mustang with 5 lug 10 inch drums. Several manufacturers of the front drum assemblies such as Kelsey Hayes and Bendix were suppliers to Ford over the years. Quite a bit of labor to press these out. May or may not have threaded studs, or...

$0 Price: $95.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30618 -

Used grade A spinner / wheel cover ornament cap. These were sold over the counter starting in 1968 as an add on to your existing hubcaps (will not fit Gurney style caps). Even though this is graded as an A, do know the center will be faded or possibly repainted. Grade A centers will not be pitted or have cracked plexi. The Ford part # as seen on the box is C8WY-1130-A, casting number as seen on back reads C8WA-1A041-A. Does not include the cap itself. ...

$0 Price: $589.85

Buy Details

Availability: Rare / NOS Part
Item #: 13131 -

This NOS kit was sold over the counter starting in 1968 as an add on to your existing hubcaps (will not fit Gurney style caps). The Ford part # as seen on the box is C8WY-1130-A, casting number as seen on back reads C8WA-1A041-A. Sold as a set of four. This set will require drilling holes in your hub caps. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for...

$0 Price: $160.07

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15817 -

Used grade "A" simulated wire spoke hubcap / wheel cover that is in excellent condition with no curb scrapes, stress cracks in plastic center or pits in die-cast. Ford part # C7WY-1130-C.*NOTE* You will often see this same cap with the Mercury head center and a red background. This cap is not correct for Cougar, but was found on other Mercury products such as the Montego.

$0 Price: $88.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24134 -

Used simulated wire spoke hubcap / wheel cover that is in average condition with minor curb scrapes. Ford part # C7WY-1130-C.*NOTE* You will often see this same cap with the Mercury head center and a red background. This cap is not correct for Cougar, but was found on other Mercury products such as the Montego.

$0 Price: $259.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12842 -

Brand new FoMoCo simulated wire spoke hubcap. We do not have the original packaging for these at present. Ford part # C7WY-1130-C.*NOTE* You will often see this same cap with the Mercury head center and a red background. This cap is not correct for Cougar, but was found on other Mercury products such as the Montego.

$0 Price: $46.25

Buy Details

Availability: In-Stock Item
Item #: 30526 -

Reproduction dog dish style hubcaps / wheel covers for the Mercury Cougar as well as other Mercury and Ford products. There are no less than three versions of this reproduction unit on the market. This one, in my opinion, is the best option. The hue is not as brilliant as the original, but a very nice cap for the fit and finish that it offers. We have trim rings available too! Check out our video on Legendary Wheels below: NOTE: These are for use on the Legendary Series Eliminator wheels Fits:...

$0 Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30623 -

Used grade A "dog dish" style hubcap that will show minimal or no paint loss / fading and no dings. Most early Cougars used the full hubcap / wheel cover, so this one is rarely found on a Cougar. We have seen these used on wheels painted the body color on basic Cougars as well as black painted wheels.Ford part # C8MY-1130-A

$0 Price: $36.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24387 -

Used dog dish style hubcap that will show paint loss / fading and at least one ding on our grade B driver quality example. Most early Cougars used the full hubcap / wheel cover, so this one is rarely found on a Cougar. We have seen these used on wheels painted the body color on basic Cougars as well as black painted wheels. Ford part # C8MY-1130-A

$0 Price: $139.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31065 -

Excellent condition NOS "dog dish" style hubcap. Most early Cougars used the full hubcap / wheel cover, so this one is rarely found on a Cougar. We have seen these used on wheels painted the body color on basic Cougars as well as black painted wheels. Ford part # C8MY-1130-A

$0 Price: $88.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12154 -

Used simulated wire spoke hubcap / wheel cover that is in average condition with minor curb scrapes. Most Cougar s were equipped with the black center medallion from the factory but when sold as an over the counter accessory often the red center caps were sold to Cougar owners. If you have black centers and would like to exchange them for our red centers we would be happy to oblige! Ford part # C7WY-1130-C.*NOTE* You will often see this same cap with the Mercury head center and a red...

$0 Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 24136 -

Used sports special turbine / Dan Gurney Special hubcap / wheel cover. Grade A, No obvious scratches but the paint will show age. Ford part # C7WY-1130-F.*NOTE* You can often find a hubcap like this with the Mercury Head center. This is not correct for the Cougar, but rather the Montego, the foil decal in the center can easily be removed.Fits:1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar ...

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15852 -

Used sports special turbine / Dan Gurney Special hubcap / wheel cover. Grade B, driver quality, will have curb scratches.Ford part # C7WY-1130-F.*NOTE* You can often find a hubcap like this with the Mercury Head center. This is not correct for the Cougar, but rather the Montego, the foil decal in the center can easily be removed.Fits:1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar ...

$0 Price: $99.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24132 -

Used grade "A" hubcap / wheel cover for the standard Mercury Cougar. These grade "A" units will not have curb rash, dings and the paint will not be faded out and will be nearly or completely intact. These caps are ones that were most likely take off early in life and stored in doors properly.Ford part # C7WY-1130-A. ...

$0 Price: $38.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10131 -

Used grade "B" hubcap / wheel cover for the standard Mercury Cougar. These grade "B" units will have some minor curb rashing, dings and the paint will likely be faded out and or missing in some spots. Ford part # C7WY-1130-A.