Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
Refine Search:

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 4561-4608 of 5085
Price: $228.87

Buy Details

Availability: Out of Stock
Item #: 24147 -

This is what is referred to as a campaign part. It was found that the early 1967 Cougars were having some issues with the headlights and this revised hose kit with ground strap was the fix. Often these have been found opened on dealers shelves with the "near new" take off hoses placed back in the original box. This is a great find for the guy wanting to do a concours restoration on his 1967 Mercury Cougar. Not for use on a 1968 as the switch was located under the dash as opposed to next to the...

MSRP:$210.02
Price: $172.75

Buy Details

Availability: Out of Stock
Item #: 42303 -

This is the correct control valve end hoses that comes from the power steering pump on all big blocks and the 1969 and 70 small blocks, and will work for the 1967 or 1968 small blocks with the 5/16 inch control valve fitting if the power steering hoses are routed the same as on the big block engines. Includes both Pressure and Return hose that connect to the control valve. The big block routing is far superior to the original routing as the original routing was susceptible to rubbing against...

Price: $101.85

Buy Details

Availability: Out of Stock
Item #: 31363 -

The tubbing bends are all "spot on" and the portion that passes through the rubber insulator are identical to NOS. You will not find these at your local auto parts store or the the "Mustang Discount" folks. Replaces Ford Part Numbers: C7OZ-3A719-A, C7OZ-3A719-C, C7OZ-3A713-A, C7OZ-3A713-C, C7OZ-3A713-D. Please Note: We highly recommend upgrading to the large nut (5/16") control valve as the small nut (1/4") control valve posses a potential safety issue, thus the reason why Ford replaced it the...

MSRP:$210.00
Price: $187.45

Buy Details

Availability: Out of Stock
Item #: 11647 -

We are one of the only Mustang / Cougar vendors that carry "correct" power steering hoses for your early, big block Cougar or Mustang. The tubing bends are all "spot on" and the portion that passes through the rubber insulator are identical to NOS. You will not find all of these hoses at your local auto parts store or the the "Mustang Discount" folks. Fits the FE Big Block 390, 427 & 428 Mercury Cougar or Ford Mustang with or without Power Steering Cooler.  Be sure to select the option to...

MSRP:$210.00
Price: $190.55

Buy Details

Availability: Out of Stock
Item #: 11651 -

This is the 1967- 1968 retrofit or re-route hose kit! The tubing bends are all "spot on" and the portion that passes through the rubber insulator are identical to NOS for 1969. You will not find these at your local auto parts store or the the "Mustang Discount" folks. These hoses will also work on a 1967 or 1968 5/16" control valve fitting if it is routed the same as the big block. You will need to purchase the power steering hose bracket for the big block in order to make it work. This is a...

Price: $256.86

Buy Details

Availability: Out of Stock, Discontinued
Item #: 11649 -

Premium power steering hose kit for the 1967 Cougar or Mustang with a small block with a 1/4" control valve fitting.We highly recommend upgrading to the large nut (5/16") control valve as the small nut control valve poses a potential safety issue, thus the reason why Ford replaced it the following year. The small nut system was engineered dangerously close to the maximum psi tolerances of the crimp that holds the fitting on the tubing ...

Price: $31.45

Buy Details

Availability: Out of Stock, On Order
Item #: 13970 -

Generic hose kit that will fit the 289 or 302 for those who are not concerned about the CONCOURS look. Used on both the 20" and 24" wide radiators Replaces Ford Part #'s C4ZE-8260-A and C4ZE-8286-A. For some helpful tips on upgrading your Cougar (or Mustang) cooling system, check out our video: ...

Price: $62.87

Buy Details

Availability: Out of Stock
Item #: 31696 -

Used rear driver side (left hand) courtesy / opera light housings for the Mercury Cougar. The rear courtesy / opera light was standard on all XR7 Cougars, but were a popular option on decor and standard level interior Cougars. These units are marked LH for the driver side and RH for the passenger side and are sold individually. Also sold as a PAIR. Ford part # C7WB-13B729-C or C7WY13A744-C for the passenger side, C7WB-13B736-C or C7WY-13A744-D for the driver side. *TRIVIA* Did you know that...

Price: $62.87

Buy Details

Availability: Out of Stock
Item #: 31697 -

Used rear passenger side (right hand) courtesy / opera light housings for the Mercury Cougar. The rear courtesy / opera light was standard on all XR7 Cougars, but were a popular option on decor and standard level interior Cougars. These units are marked LH for the driver side and RH for the passenger side and are sold individually. Also sold as a PAIR. Ford part # C7WB-13B729-C or C7WY13A744-C for the passenger side, C7WB-13B736-C or C7WY-13A744-D for the driver side. *TRIVIA* Did you know...

Price: $160.07

Buy Details

Availability: Out of Stock
Item #: 15817 -

Used grade "A" simulated wire spoke hubcap / wheel cover that is in excellent condition with no curb scrapes, stress cracks in plastic center or pits in die-cast. Ford part # C7WY-1130-C.*NOTE* You will often see this same cap with the Mercury head center and a red background. This cap is not correct for Cougar, but was found on other Mercury products such as the Montego.

Price: $194.85

Buy Details

Availability: Out of Stock
Item #: 22957 -

The Hustler Stick features heavy-duty 1-1/4" diameter tubing, and is an alignment bar designed for bumpers, hoods, decks, panels etc. Made in the USA, it has a 1/4", 6 foot long chain with hooks at each end. This versatile tool is very useful in shaping damages on a vehicle body. To use it, hook it up to the panel or bumper, anchor the stick properly, and pull it by hand.We will loan this hustler stick for 60 days, with a 100% refundable purchase price. Tool must be returned in undamaged...

Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 18935 -

Tag marked HBA-BF or HBA-BF1 for use on 1967-68 Cougar and Mustang with power steering pumps originally installed on 289/302/390/427 and all 1968 428CJ engines. Various dates, and could be designated for either a Ford-Thompson (F) or TRW (W) power steering pump. For 1969 dated tags please see the related listing.*Please Note - Current inventory is exclusively 1967-68.

Price: $98.87

Buy Details

Availability: Out of Stock
Item #: 31975 -

Fits all 1967-70 Mercury Cougar and Ford Mustang with factory manual steering. Rarely did these last 60,000 miles. To find one after 50 plus years is quite a find! These are intended for professional restoration with new bushings prior to installation. That is why they are graded as "CORE GRADE". Very limited quantities, we offer core grade suspension parts for those car owners that wish to avoid reproduction parts. Typically this manual steering, idler arm would have had a pink...

Price: $132.15

Buy Details

Availability: Out of Stock, On Order
Item #: 26694 -

Quality reproduction. Fits all 1967-70 Mercury Cougar and Ford Mustang. Rarely do these last the life of the rest of the front suspension, if you get 60,000 miles out of one you are lucky. The slightest amount of play in this component will translate to major slop in the steering. Lin, Hey, just wanted to thank you for your prompt service. Last Friday 4/24/09 I ordered a 71 - 73 Idler Arm and today (Monday 4/27/2009) I received it. WOW!!! I just wanted to let you know that you guys are...

Price: $98.87

Buy Details

Availability: Out of Stock
Item #: 31976 -

Fits all 1967-70 Mercury Cougar and Ford Mustang with factory power steering. Rarely did these last 60,000 miles. To find one after 50 plus years is quite a find! These are intended for professional restoration with new bushings prior to installation. That is why they are graded as "CORE GRADE". Very limited quantities, we offer core grade suspension parts for those car owners that wish to avoid reproduction parts. Typically this manual steering, idler arm would have had a yellow paint mark on...

Price: $299.88

Buy Details

Availability: Out of Stock
Item #: 31442 -

NOS Air conditioning belt tension pulley for Cougars and Mustangs with the 289 or 302 engine built between 1/3/1967 and 3/1/1968.  Ford part # C7AZ-8678-B. NOTE* Send in your old core for a credit toward the purchase of this NOS pulley. *NOTE* Must be used with the C7AA-2888-G cast iron lateral support brace. ...

Price: $215.87

Buy Details

Availability: Restored / Remanufactured
Item #: 11-9906 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

Price: $239.85

Buy Details

Availability: Restored / Remanufactured
Item #: 11-9900 -

Air conditioning belt tension pulley for 1967 Cougars and Mustangs with the 390 engine. These are all sold with new bearings. If your pulley only needs a bearing, we have those too. Used with C7ZZ-2888-A, which is the steel lateral support brace for 1967 Cougars and Mustangs with the S code 390 engine. Two versions of this pulley were made by Ford, the difference is the pulley itself. Some pulleys, like the one in the picture, show a solid, one piece steel pulley. There is also a common two...

Price: $101.85

Buy Details

Availability: Out of Stock
Item #: 32765 -

New old stock NOS Motorcraft stamped ignition switch for any 1967 Mercury Cougar or Ford Mustang. Technically this is a later service replacement switch, still made by Ford. Ford number C5AZ-11572-B.Here is a helpful "How To" youtube video on how to replace your ignition switch.

Price: $24.55

Buy Details

Availability: Out of Stock
Item #: 32060 -

Reproduction ignition switch w/ cylinder and 2 keys for the 1967 Cougar or Mustang.NOTE: The item comes with economy keys, they are much thinner than the premium Ford keys. The cylinder will not accept the premium keys. Here is a helpful "How To" youtube video on how to replace your ignition switch.

Price: $440.87

Buy Details

Availability: Out of Stock
Item #: 23912 -

Ultra rare item, subject to availability. Call about spent cylinders, we actively seek out those too. Our guess is that the contents of an NOS cylinder may be unstable for use.

Price: $72.86

Buy Details

Availability: Out of Stock
Item #: 24004 -

Application 1967 289 and 390 thermactor California emissions fresh air inlet assembly or Air pump filter assembly. Ford part # C7AF-9A492-A

Price: $29.15

Buy Details

Availability: Out of Stock
Item #: 20152 -

Universal driver side (left hand) or passenger side (right hand) inner floor frame patch that you can trim to fit the area that needs to be repaired.

Price: $56.45

Buy Details

Availability: Out of Stock
Item #: 10932 -

New inner floor frame support for the Mercury Cougar and Ford Mustang.

Price: $140.04

Buy Details

Availability: Out of Stock
Item #: 42390 -

Full driver (left hand) side front frame rail that measures 52" long. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

Price: $100.05

Buy Details

Availability: Out of Stock
Item #: 42393 -

Full passenger (right hand) side front frame rail that measures 52" long. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

Price: $13.86

Buy Details

Availability: Out of Stock
Item #: 23994 -

Driver quality used left side or driver side folding door handle. This type of handle was used on the 1967 XR7 models and 1968 Cougars. This is also the deluxe handle found in Mustang and other Ford / Mercury cars. Some pitting, will have a good spring and rubber bumper. Sorry mounting screw not included.

Price: $12.87

Buy Details

Availability: Out of Stock
Item #: 23993 -

Driver quality used right side or passenger side folding door handle. This type of handle was used on the 1967 XR7 models and 1968 Cougars. This is also the deluxe handle found in Mustang and other Ford / Mercury cars. Some pitting, will have a good spring and rubber bumper. Sorry mounting screw not included.

Price: $99.86

Buy Details

Availability: Out of Stock
Item #: 16-0050 -

Grade A used inspection plate cover for all 390-4V and 428CJ engines with a manual transmissions, both 3 and 4 speeds. All years 1967 - 1970. Access cover to the flywheel and clutch. This is a real clean rust free cover but if you are wanting to save money, we have grade B's which will have a dent or creases for about half the price. Find the grade B here.Ford part number C3AZ-6366-A. ...

Price: $3,449.88

Buy Details

Availability: Out of Stock
Item #: 30977 -

Very rare, early version, over the counter, Group II dress up accessory item for any 289 / 302 small block engine. This over the counter Intake was marketed by Shelby American in the Cougar catalog titled "How To Sharpen Your Cat's Claws". Shelby casting number S2MS-9424-A. The early version differs from the late in that it is missing the three bosses on the passenger side that are seen on the later versions. This intake is identical to the last COBRA intakes that came on the late build...

Price: $297.86

Buy Details

Availability: Out of Stock
Item #: 23997 -

C7AE-9425-J Cast iron intake manifold used on 1967 S code 390-4V engines in a Mercury Cougar or Ford Mustang. Stock 4 barrel intake manifold, used after 9-11-1967. Take off manifold with correct casting number of C7AE-9425-J. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford master part number C6AZ-9424-N. *Trivia - One of the heaviest car intake manifolds ever made, over 80 lbs.

Price: $525.87

Buy Details

Availability: Out of Stock
Item #: 22535 -

Cast aluminum Sidewinder intake manifold. Over the counter speed part for the 427 Medium Riser. The offset carburetor placement was to help provided equal length runners in regards to flow. Single 4 barrel intake manifold as shown. Looking closely at the photos, this one has had a repair performed in the past. Intake shipped bare, less carburetor studs, heater tube, vacuum fittings, and water neck where applicable. Ford casting number C6AE-9424-J.

Price: $48.29

Buy Details

Availability: Out of Stock, Discontinued
Item #: 14915 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers so if speaker holes are needed you will have to use your old panels as a template to drill holes in these "Mustang" reproductions. Replaces Ford Part number C7WY-650345-A1G / Casting number as seen on the back of the driver side will read C7WB-6502345-BW

Price: $48.29

Buy Details

Availability: Out of Stock, On Order
Item #: 14916 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

Price: $48.29

Buy Details

Availability: Out of Stock, On Order
Item #: 14918 -

Reproduction interior kick panels in parchment / off-white for the Mercury Cougar or Ford Mustang. Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

Price: $48.29

Buy Details

Availability: Out of Stock, On Order
Item #: 14920 -

Sold as a pair, these are a perfect fit, correct texture and are less prone to cracking than originals. They do not have the perforated speaker holes for those utilizing kick panel speakers. Check out our custom made kick panels that accommodate modern speakers.

Price: $1,228.37

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10754 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC.Accurate, show quality reproduction 1967 XR7 Black interior seat kit (code 6A). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather seats which includes very smooth leather on the center and a rough grain on the perimeter. Kits come with a pair of upper...

Price: $772.97

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10755 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC.Accurate, show quality reproduction 1967 XR7 Black front seat interior kit (code 6A). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather seats which includes very smooth leather on the center and a rough grain on the perimeter. Kit comes with a pair of...

Price: $525.47

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10756 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC.Accurate, show quality reproduction 1967 XR7 Black rear seat interior kit (code 6A). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather rear bench with upper and lower seat skins. Keep in mind the rear seats were primarily vinyl with only the very top...

Price: $1,228.37

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10757 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC. Accurate, show quality reproduction 1967 XR7 hard top parchment / off-white interior seat kit (1967 code 6U). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather seats which includes very smooth leather on the center and a rough grain on the perimeter....

Price: $772.97

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10758 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC. Accurate, show quality reproduction 1967 XR7 hard top parchment / off-white front seat interior kit (1967 code 6U). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather seats which includes very smooth leather on the center and a rough grain on the...

Price: $525.47

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10759 -

AS OF NOW, THERE IS NO MANUFACTURER MAKING LEATHER UPHOLSTERY. THIS ITEM IS NO LONGER AVAILABLE FROM WCCC. Accurate, show quality reproduction 1967 XR7 hard top parchment / off-white rear seat interior kit (1967 code 6U). Seats sewn with quality leather inserts with correct vinyl sides and backs with accurate stitching. These interior kits feature leather inserts with graining like the original XR7 leather rear bench with upper and lower seat skins. Keep in mind the rear seats were primarily...

Price: $18.25

Buy Details

Availability: Out of Stock
Item #: 20160 -

Reproduction intermediate pipe exhaust bracket for the 67 - 70 Cougar or Mustang. Used on big block vehicles equipped with the transverse muffler. Attaches to the resonator exhaust hangers just before the muffler pipe rises above the rear end. Sold individually, 2 required per car.

Price: $28.89

Buy Details

Availability: Out of Stock
Item #: 31562 -

Used intermediate pipe exhaust bracket for the 67 - 70 Cougar or Mustang. Used on big block vehicles equipped with the transverse muffler. Attaches to the resonator exhaust hangers just before the muffler pipe rises above the rear end. Sold individually, 2 required per car.

MSRP:$24.99
Price: $18.05

Buy Details

Availability: Out of Stock
Item #: 42073 -

Great option for international customers. Light weight, and all you need is a PC or laptop, and you can plug this drive in and access all the same information that you'd find in the full sized shop manual books.

Price: $11.88

Buy Details

Availability: Out of Stock
Item #: 15-0054 -

Rubber isolator used in tilt away steering column near the lower bearing. Two required per car. There is an active thread on the Classic Cougar Community Forum discussing tilt columns and trouble shooting. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...